watchdog: remove driver for integrated WDT of ZFx86 486-based SoC
Subsystems (2)
PATCH 1/1 watchdog: remove driver for integrated WDT of ZFx86 486-based SoC
The machzwd driver supports the integrated watchdog of the ZF Micro ZFx86 SoC, which contains a 486-compatible core [1]. Since 486 support was removed in commit 8b793a92d862 ("x86/cpu: Remove M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.
[1] https://www.zfmicro.com/zfx86.html
--- .../watchdog/watchdog-parameters.rst | 10 - drivers/watchdog/Kconfig | 13 - drivers/watchdog/Makefile | 1 - drivers/watchdog/machzwd.c | 452 ------------------ 4 files changed, 476 deletions(-) delete mode 100644 drivers/watchdog/machzwd.c
Documentation/watchdog/watchdog-parameters.rst +0 -10
@@ -284,16 +284,6 @@ ixp4xx_wdt: ------------------------------------------------- -machzwd: - nowayout: - Watchdog cannot be stopped once started - (default=kernel config parameter) - action: - after watchdog resets, generate: - 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI - -------------------------------------------------- - max63xx_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60
drivers/watchdog/Kconfig +0 -13
@@ -1712,19 +1712,6 @@ config W83977F_WDT To compile this driver as a module, choose M here: the module will be called w83977f_wdt. -config MACHZ_WDT - tristate "ZF MachZ Watchdog" - depends on (X86 || COMPILE_TEST) && HAS_IOPORT - help - If you are using a ZF Micro MachZ processor, say Y here, otherwise - N. This is the driver for the watchdog timer built-in on that - processor using ZF-Logic interface. This watchdog simply watches - your kernel to make sure it doesn't freeze, and if it does, it - reboots your computer after a certain amount of time. - - To compile this driver as a module, choose M here: the - module will be called machzwd. - config SBC_EPX_C3_WATCHDOG tristate "Winsystems SBC EPX-C3 watchdog" depends on (X86 || COMPILE_TEST) && HAS_IOPORT
drivers/watchdog/Makefile +0 -1
@@ -146,7 +146,6 @@ obj-$(CONFIG_VIA_WDT) += via_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o -obj-$(CONFIG_MACHZ_WDT) += machzwd.o obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o obj-$(CONFIG_INTEL_OC_WATCHDOG) += intel_oc_wdt.o
drivers/watchdog/machzwd.c deleted +0 -452
452 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 8 lines · Ethan Nelson-Moore
The machzwd driver supports the integrated watchdog of the ZF Micro ZFx86 SoC, which contains a 486-compatible core [1]. Since 486 support was removed in commit
8b793a92d862("x86/cpu: Remove M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.[1] https://www.zfmicro.com/zfx86.html
Signed-off-by Ethan Nelson-Moore <[email protected]>
Quoted 4 lines · Ethan Nelson-Moore
The machzwd driver supports the integrated watchdog of the ZF Micro ZFx86 SoC, which contains a 486-compatible core [1]. Since 486 support was removed in commit
8b793a92d862("x86/cpu: Remove M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.
Hi, Guenter,
Would you be willing to merge this patch? Unlike the other drivers whose removal I proposed, this one can't be used at all now that 486 support is gone from the kernel - no other hardware contains this WDT.
Ethan
Guenter Roeck
maintainerQuoted 7 lines · Ethan Nelson-Moore
Quoted 4 lines · Ethan Nelson-Moore
The machzwd driver supports the integrated watchdog of the ZF Micro ZFx86 SoC, which contains a 486-compatible core [1]. Since 486 support was removed in commit
8b793a92d862("x86/cpu: Remove M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.
Quoted 6 lines
Hi, Guenter,
Would you be willing to merge this patch? Unlike the other drivers whose removal I proposed, this one can't be used at all now that 486 support is gone from the kernel - no other hardware contains this WDT.
Already done.
Guenter
Quoted 1 line · Guenter Roeck
Already done.
Excellent. Thank you!
Ethan