FAILED: patch "[PATCH] ALSA: aoa: i2sbus: clear stale prepared state" failed to apply to 6.12-stable tree

index 97c807e67d56..63004ece94f9 100644
@@ -165,17 +165,16 @@ static int i2sbus_pcm_open(struct i2sbus_dev *i2sdev, int in)
 	 * currently in use (if any). */
 	hw->rate_min = 5512;
 	hw->rate_max = 192000;
-	/* if the other stream is active, then we can only
-	 * support what it is currently using.
-	 * FIXME: I lied. This comment is wrong. We can support
-	 * anything that works with the same serial format, ie.
-	 * when recording 24 bit sound we can well play 16 bit
-	 * sound at the same time iff using the same transfer mode.
+	/* If the other stream is already prepared, keep this stream
+	 * on the same duplex format and rate.
+	 *
+	 * i2sbus_pcm_prepare() still programs one shared transport
+	 * configuration for both directions, so mixed duplex formats
+	 * are not supported here.
 	 */
 	if (other->active) {
-		/* FIXME: is this guaranteed by the alsa api? */
 		hw->formats &= pcm_format_to_bits(i2sdev->format);
-		/* see above, restrict rates to the one we already have */
+		/* Restrict rates to the one already in use. */
 		hw->rate_min = i2sdev->rate;
 		hw->rate_max = i2sdev->rate;
 	}

@@ -283,6 +282,23 @@ void i2sbus_wait_for_stop_both(struct i2sbus_dev *i2sdev)
 }
 #endif
 
+static void i2sbus_pcm_clear_active(struct i2sbus_dev *i2sdev, int in)
+{
+	struct pcm_info *pi;
+
+	guard(mutex)(&i2sdev->lock);
+
+	get_pcm_info(i2sdev, in, &pi, NULL);
+	pi->active = 0;
+}
+
+static inline int i2sbus_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *params, int in)
+{
+	i2sbus_pcm_clear_active(snd_pcm_substream_chip(substream), in);
+	return 0;
+}
+
 static inline int i2sbus_hw_free(struct snd_pcm_substream *substream, int in)
 {
 	struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream);

@@ -291,14 +307,27 @@ static inline int i2sbus_hw_free(struct snd_pcm_substream *substream, int in)
 	get_pcm_info(i2sdev, in, &pi, NULL);
 	if (pi->dbdma_ring.stopping)
 		i2sbus_wait_for_stop(i2sdev, pi);
+	i2sbus_pcm_clear_active(i2sdev, in);
 	return 0;
 }
 
+static int i2sbus_playback_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params)
+{
+	return i2sbus_hw_params(substream, params, 0);
+}
+
 static int i2sbus_playback_hw_free(struct snd_pcm_substream *substream)
 {
 	return i2sbus_hw_free(substream, 0);
 }
 
+static int i2sbus_record_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *params)
+{
+	return i2sbus_hw_params(substream, params, 1);
+}
+
 static int i2sbus_record_hw_free(struct snd_pcm_substream *substream)
 {
 	return i2sbus_hw_free(substream, 1);

@@ -335,7 +364,6 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 		return -EINVAL;
 
 	runtime = pi->substream->runtime;
-	pi->active = 1;
 	if (other->active &&
 	    ((i2sdev->format != runtime->format)
 	     || (i2sdev->rate != runtime->rate)))

@@ -444,9 +472,11 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 
 	/* early exit if already programmed correctly */
 	/* not locking these is fine since we touch them only in this function */
-	if (in_le32(&i2sdev->intfregs->serial_format) == sfr
-	 && in_le32(&i2sdev->intfregs->data_word_sizes) == dws)
+	if (in_le32(&i2sdev->intfregs->serial_format) == sfr &&
+	    in_le32(&i2sdev->intfregs->data_word_sizes) == dws) {
+		pi->active = 1;
 		return 0;
+	}
 
 	/* let's notify the codecs about clocks going away.
 	 * For now we only do mastering on the i2s cell... */

@@ -484,6 +514,7 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 		if (cii->codec->switch_clock)
 			cii->codec->switch_clock(cii, CLOCK_SWITCH_SLAVE);
 
+	pi->active = 1;
 	return 0;
 }
 

@@ -728,6 +759,7 @@ static snd_pcm_uframes_t i2sbus_playback_pointer(struct snd_pcm_substream
 static const struct snd_pcm_ops i2sbus_playback_ops = {
 	.open =		i2sbus_playback_open,
 	.close =	i2sbus_playback_close,
+	.hw_params =	i2sbus_playback_hw_params,
 	.hw_free =	i2sbus_playback_hw_free,
 	.prepare =	i2sbus_playback_prepare,
 	.trigger =	i2sbus_playback_trigger,

@@ -796,6 +828,7 @@ static snd_pcm_uframes_t i2sbus_record_pointer(struct snd_pcm_substream
 static const struct snd_pcm_ops i2sbus_record_ops = {
 	.open =		i2sbus_record_open,
 	.close =	i2sbus_record_close,
+	.hw_params =	i2sbus_record_hw_params,
 	.hw_free =	i2sbus_record_hw_free,
 	.prepare =	i2sbus_record_prepare,
 	.trigger =	i2sbus_record_trigger,

index ac347a14f282c..7400a5aa47ca6 100644
@@ -122,10 +122,9 @@ static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	s8 l, r;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
-	mutex_unlock(&onyx->mutex);
 
 	ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT;
 	ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT;

@@ -146,15 +145,13 @@ static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
 	    ucontrol->value.integer.value[1] > -1 + VOLUME_RANGE_SHIFT)
 		return -EINVAL;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
 
 	if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] &&
-	    r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) {
-		mutex_unlock(&onyx->mutex);
+	    r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1])
 		return 0;
-	}
 
 	onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT,
 			    ucontrol->value.integer.value[0]

@@ -162,7 +159,6 @@ static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
 	onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT,
 			    ucontrol->value.integer.value[1]
 			     - VOLUME_RANGE_SHIFT);
-	mutex_unlock(&onyx->mutex);
 
 	return 1;
 }

@@ -198,9 +194,8 @@ static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	u8 ig;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig);
-	mutex_unlock(&onyx->mutex);
 
 	ucontrol->value.integer.value[0] =
 		(ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT;

@@ -217,14 +212,13 @@ static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
 	if (ucontrol->value.integer.value[0] < 3 + INPUTGAIN_RANGE_SHIFT ||
 	    ucontrol->value.integer.value[0] > 28 + INPUTGAIN_RANGE_SHIFT)
 		return -EINVAL;
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 	n = v;
 	n &= ~ONYX_ADC_PGA_GAIN_MASK;
 	n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT)
 		& ONYX_ADC_PGA_GAIN_MASK;
 	onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n);
-	mutex_unlock(&onyx->mutex);
 
 	return n != v;
 }

@@ -252,9 +246,8 @@ static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	s8 v;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
-	mutex_unlock(&onyx->mutex);
 
 	ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC);
 

@@ -265,13 +258,12 @@ static void onyx_set_capture_source(struct onyx *onyx, int mic)
 {
 	s8 v;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 	v &= ~ONYX_ADC_INPUT_MIC;
 	if (mic)
 		v |= ONYX_ADC_INPUT_MIC;
 	onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v);
-	mutex_unlock(&onyx->mutex);
 }
 
 static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,

@@ -312,9 +304,8 @@ static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	u8 c;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c);
-	mutex_unlock(&onyx->mutex);
 
 	ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT);
 	ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT);

@@ -329,9 +320,9 @@ static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
 	u8 v = 0, c = 0;
 	int err = -EBUSY;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	if (onyx->analog_locked)
-		goto out_unlock;
+		return -EBUSY;
 
 	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
 	c = v;

@@ -342,9 +333,6 @@ static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
 		c |= ONYX_MUTE_RIGHT;
 	err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c);
 
- out_unlock:
-	mutex_unlock(&onyx->mutex);
-
 	return !err ? (v != c) : err;
 }
 

@@ -373,9 +361,8 @@ static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol,
 	u8 address = (pv >> 8) & 0xff;
 	u8 mask = pv & 0xff;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, address, &c);
-	mutex_unlock(&onyx->mutex);
 
 	ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity;
 

@@ -394,11 +381,10 @@ static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
 	u8 address = (pv >> 8) & 0xff;
 	u8 mask = pv & 0xff;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	if (spdiflock && onyx->spdif_locked) {
 		/* even if alsamixer doesn't care.. */
-		err = -EBUSY;
-		goto out_unlock;
+		return -EBUSY;
 	}
 	onyx_read_register(onyx, address, &v);
 	c = v;

@@ -407,9 +393,6 @@ static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
 		c |= mask;
 	err = onyx_write_register(onyx, address, c);
 
- out_unlock:
-	mutex_unlock(&onyx->mutex);
-
 	return !err ? (v != c) : err;
 }
 

@@ -490,7 +473,7 @@ static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	u8 v;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
 	ucontrol->value.iec958.status[0] = v & 0x3e;
 

@@ -502,7 +485,6 @@ static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
 
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 	ucontrol->value.iec958.status[4] = v & 0x0f;
-	mutex_unlock(&onyx->mutex);
 
 	return 0;
 }

@@ -513,7 +495,7 @@ static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	u8 v;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
 	v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e);
 	onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v);

@@ -528,7 +510,6 @@ static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 	v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f);
 	onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
-	mutex_unlock(&onyx->mutex);
 
 	return 1;
 }

@@ -673,14 +654,13 @@ static int onyx_usable(struct codec_info_item *cii,
 	struct onyx *onyx = cii->codec_data;
 	int spdif_enabled, analog_enabled;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 	spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
 	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
 	analog_enabled =
 		(v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
 		 != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
-	mutex_unlock(&onyx->mutex);
 
 	switch (ti->tag) {
 	case 0: return 1;

@@ -696,9 +676,8 @@ static int onyx_prepare(struct codec_info_item *cii,
 {
 	u8 v;
 	struct onyx *onyx = cii->codec_data;
-	int err = -EBUSY;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 
 #ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
 	if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) {

@@ -707,10 +686,9 @@ static int onyx_prepare(struct codec_info_item *cii,
 		if (onyx_write_register(onyx,
 					ONYX_REG_DAC_CONTROL,
 					v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT))
-			goto out_unlock;
+			return -EBUSY;
 		onyx->analog_locked = 1;
-		err = 0;
-		goto out_unlock;
+		return 0;
 	}
 #endif
 	switch (substream->runtime->rate) {

@@ -720,8 +698,7 @@ static int onyx_prepare(struct codec_info_item *cii,
 		/* these rates are ok for all outputs */
 		/* FIXME: program spdif channel control bits here so that
 		 *	  userspace doesn't have to if it only plays pcm! */
-		err = 0;
-		goto out_unlock;
+		return 0;
 	default:
 		/* got some rate that the digital output can't do,
 		 * so disable and lock it */

@@ -729,16 +706,12 @@ static int onyx_prepare(struct codec_info_item *cii,
 		if (onyx_write_register(onyx,
 					ONYX_REG_DIG_INFO4,
 					v & ~ONYX_SPDIF_ENABLE))
-			goto out_unlock;
+			return -EBUSY;
 		onyx->spdif_locked = 1;
-		err = 0;
-		goto out_unlock;
+		return 0;
 	}
 
- out_unlock:
-	mutex_unlock(&onyx->mutex);
-
-	return err;
+	return -EBUSY;
 }
 
 static int onyx_open(struct codec_info_item *cii,

@@ -746,9 +719,8 @@ static int onyx_open(struct codec_info_item *cii,
 {
 	struct onyx *onyx = cii->codec_data;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx->open_count++;
-	mutex_unlock(&onyx->mutex);
 
 	return 0;
 }

@@ -758,11 +730,10 @@ static int onyx_close(struct codec_info_item *cii,
 {
 	struct onyx *onyx = cii->codec_data;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	onyx->open_count--;
 	if (!onyx->open_count)
 		onyx->spdif_locked = onyx->analog_locked = 0;
-	mutex_unlock(&onyx->mutex);
 
 	return 0;
 }

@@ -772,7 +743,7 @@ static int onyx_switch_clock(struct codec_info_item *cii,
 {
 	struct onyx *onyx = cii->codec_data;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	/* this *MUST* be more elaborate later... */
 	switch (what) {
 	case CLOCK_SWITCH_PREPARE_SLAVE:

@@ -784,7 +755,6 @@ static int onyx_switch_clock(struct codec_info_item *cii,
 	default: /* silence warning */
 		break;
 	}
-	mutex_unlock(&onyx->mutex);
 
 	return 0;
 }

@@ -795,27 +765,21 @@ static int onyx_suspend(struct codec_info_item *cii, pm_message_t state)
 {
 	struct onyx *onyx = cii->codec_data;
 	u8 v;
-	int err = -ENXIO;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
-		goto out_unlock;
+		return -ENXIO;
 	onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV);
 	/* Apple does a sleep here but the datasheet says to do it on resume */
-	err = 0;
- out_unlock:
-	mutex_unlock(&onyx->mutex);
-
-	return err;
+	return 0;
 }
 
 static int onyx_resume(struct codec_info_item *cii)
 {
 	struct onyx *onyx = cii->codec_data;
 	u8 v;
-	int err = -ENXIO;
 
-	mutex_lock(&onyx->mutex);
+	guard(mutex)(&onyx->mutex);
 
 	/* reset codec */
 	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);

@@ -827,17 +791,13 @@ static int onyx_resume(struct codec_info_item *cii)
 
 	/* take codec out of suspend (if it still is after reset) */
 	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
-		goto out_unlock;
+		return -ENXIO;
 	onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV));
 	/* FIXME: should divide by sample rate, but 8k is the lowest we go */
 	msleep(2205000/8000);
 	/* reset all values */
 	onyx_register_init(onyx);
-	err = 0;
- out_unlock:
-	mutex_unlock(&onyx->mutex);
-
-	return err;
+	return 0;
 }
 
 #endif /* CONFIG_PM */

303 lines not on this page · raw message

index 39bb409b27f6d..19ed0e6907da3 100644
@@ -212,10 +212,9 @@ static void ftr_handle_notify(struct work_struct *work)
 	struct gpio_notification *notif =
 		container_of(work, struct gpio_notification, work.work);
 
-	mutex_lock(&notif->mutex);
+	guard(mutex)(&notif->mutex);
 	if (notif->notify)
 		notif->notify(notif->data);
-	mutex_unlock(&notif->mutex);
 }
 
 static void gpio_enable_dual_edge(int gpio)

@@ -341,19 +340,17 @@ static int ftr_set_notify(struct gpio_runtime *rt,
 	if (!irq)
 		return -ENODEV;
 
-	mutex_lock(&notif->mutex);
+	guard(mutex)(&notif->mutex);
 
 	old = notif->notify;
 
-	if (!old && !notify) {
-		err = 0;
-		goto out_unlock;
-	}
+	if (!old && !notify)
+		return 0;
 
 	if (old && notify) {
 		if (old == notify && notif->data == data)
 			err = 0;
-		goto out_unlock;
+		return err;
 	}
 
 	if (old && !notify)

@@ -362,16 +359,13 @@ static int ftr_set_notify(struct gpio_runtime *rt,
 	if (!old && notify) {
 		err = request_irq(irq, ftr_handle_notify_irq, 0, name, notif);
 		if (err)
-			goto out_unlock;
+			return err;
 	}
 
 	notif->notify = notify;
 	notif->data = data;
 
-	err = 0;
- out_unlock:
-	mutex_unlock(&notif->mutex);
-	return err;
+	return 0;
 }
 
 static int ftr_get_detect(struct gpio_runtime *rt,

index 37866039d1ead..e76bde25e41af 100644
@@ -74,10 +74,9 @@ static void pmf_handle_notify(struct work_struct *work)
 	struct gpio_notification *notif =
 		container_of(work, struct gpio_notification, work.work);
 
-	mutex_lock(&notif->mutex);
+	guard(mutex)(&notif->mutex);
 	if (notif->notify)
 		notif->notify(notif->data);
-	mutex_unlock(&notif->mutex);
 }
 
 static void pmf_gpio_init(struct gpio_runtime *rt)

@@ -154,19 +153,17 @@ static int pmf_set_notify(struct gpio_runtime *rt,
 		return -EINVAL;
 	}
 
-	mutex_lock(&notif->mutex);
+	guard(mutex)(&notif->mutex);
 
 	old = notif->notify;
 
-	if (!old && !notify) {
-		err = 0;
-		goto out_unlock;
-	}
+	if (!old && !notify)
+		return 0;
 
 	if (old && notify) {
 		if (old == notify && notif->data == data)
 			err = 0;
-		goto out_unlock;
+		return err;
 	}
 
 	if (old && !notify) {

@@ -178,10 +175,8 @@ static int pmf_set_notify(struct gpio_runtime *rt,
 	if (!old && notify) {
 		irq_client = kzalloc(sizeof(struct pmf_irq_client),
 				     GFP_KERNEL);
-		if (!irq_client) {
-			err = -ENOMEM;
-			goto out_unlock;
-		}
+		if (!irq_client)
+			return -ENOMEM;
 		irq_client->data = notif;
 		irq_client->handler = pmf_handle_notify_irq;
 		irq_client->owner = THIS_MODULE;

@@ -192,17 +187,14 @@ static int pmf_set_notify(struct gpio_runtime *rt,
 			printk(KERN_ERR "snd-aoa: gpio layer failed to"
 					" register %s irq (%d)\n", name, err);
 			kfree(irq_client);
-			goto out_unlock;
+			return err;
 		}
 		notif->gpio_private = irq_client;
 	}
 	notif->notify = notify;
 	notif->data = data;
 
-	err = 0;
- out_unlock:
-	mutex_unlock(&notif->mutex);
-	return err;
+	return 0;
 }
 
 static int pmf_get_detect(struct gpio_runtime *rt,

184 lines not on this page · raw message

index 1edda4c9c6ab3..77730255fbee4 100644
@@ -165,17 +165,16 @@ static int i2sbus_pcm_open(struct i2sbus_dev *i2sdev, int in)
 	 * currently in use (if any). */
 	hw->rate_min = 5512;
 	hw->rate_max = 192000;
-	/* if the other stream is active, then we can only
-	 * support what it is currently using.
-	 * FIXME: I lied. This comment is wrong. We can support
-	 * anything that works with the same serial format, ie.
-	 * when recording 24 bit sound we can well play 16 bit
-	 * sound at the same time iff using the same transfer mode.
+	/* If the other stream is already prepared, keep this stream
+	 * on the same duplex format and rate.
+	 *
+	 * i2sbus_pcm_prepare() still programs one shared transport
+	 * configuration for both directions, so mixed duplex formats
+	 * are not supported here.
 	 */
 	if (other->active) {
-		/* FIXME: is this guaranteed by the alsa api? */
 		hw->formats &= pcm_format_to_bits(i2sdev->format);
-		/* see above, restrict rates to the one we already have */
+		/* Restrict rates to the one already in use. */
 		hw->rate_min = i2sdev->rate;
 		hw->rate_max = i2sdev->rate;
 	}

@@ -283,6 +282,23 @@ void i2sbus_wait_for_stop_both(struct i2sbus_dev *i2sdev)
 }
 #endif
 
+static void i2sbus_pcm_clear_active(struct i2sbus_dev *i2sdev, int in)
+{
+	struct pcm_info *pi;
+
+	guard(mutex)(&i2sdev->lock);
+
+	get_pcm_info(i2sdev, in, &pi, NULL);
+	pi->active = 0;
+}
+
+static inline int i2sbus_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *params, int in)
+{
+	i2sbus_pcm_clear_active(snd_pcm_substream_chip(substream), in);
+	return 0;
+}
+
 static inline int i2sbus_hw_free(struct snd_pcm_substream *substream, int in)
 {
 	struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream);

@@ -291,14 +307,27 @@ static inline int i2sbus_hw_free(struct snd_pcm_substream *substream, int in)
 	get_pcm_info(i2sdev, in, &pi, NULL);
 	if (pi->dbdma_ring.stopping)
 		i2sbus_wait_for_stop(i2sdev, pi);
+	i2sbus_pcm_clear_active(i2sdev, in);
 	return 0;
 }
 
+static int i2sbus_playback_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params)
+{
+	return i2sbus_hw_params(substream, params, 0);
+}
+
 static int i2sbus_playback_hw_free(struct snd_pcm_substream *substream)
 {
 	return i2sbus_hw_free(substream, 0);
 }
 
+static int i2sbus_record_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *params)
+{
+	return i2sbus_hw_params(substream, params, 1);
+}
+
 static int i2sbus_record_hw_free(struct snd_pcm_substream *substream)
 {
 	return i2sbus_hw_free(substream, 1);

@@ -335,7 +364,6 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 		return -EINVAL;
 
 	runtime = pi->substream->runtime;
-	pi->active = 1;
 	if (other->active &&
 	    ((i2sdev->format != runtime->format)
 	     || (i2sdev->rate != runtime->rate)))

@@ -450,9 +478,11 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 
 	/* early exit if already programmed correctly */
 	/* not locking these is fine since we touch them only in this function */
-	if (in_le32(&i2sdev->intfregs->serial_format) == sfr
-	 && in_le32(&i2sdev->intfregs->data_word_sizes) == dws)
+	if (in_le32(&i2sdev->intfregs->serial_format) == sfr &&
+	    in_le32(&i2sdev->intfregs->data_word_sizes) == dws) {
+		pi->active = 1;
 		return 0;
+	}
 
 	/* let's notify the codecs about clocks going away.
 	 * For now we only do mastering on the i2s cell... */

@@ -490,6 +520,7 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
 		if (cii->codec->switch_clock)
 			cii->codec->switch_clock(cii, CLOCK_SWITCH_SLAVE);
 
+	pi->active = 1;
 	return 0;
 }
 

@@ -746,6 +777,7 @@ static snd_pcm_uframes_t i2sbus_playback_pointer(struct snd_pcm_substream
 static const struct snd_pcm_ops i2sbus_playback_ops = {
 	.open =		i2sbus_playback_open,
 	.close =	i2sbus_playback_close,
+	.hw_params =	i2sbus_playback_hw_params,
 	.hw_free =	i2sbus_playback_hw_free,
 	.prepare =	i2sbus_playback_prepare,
 	.trigger =	i2sbus_playback_trigger,

@@ -814,6 +846,7 @@ static snd_pcm_uframes_t i2sbus_record_pointer(struct snd_pcm_substream
 static const struct snd_pcm_ops i2sbus_record_ops = {
 	.open =		i2sbus_record_open,
 	.close =	i2sbus_record_close,
+	.hw_params =	i2sbus_record_hw_params,
 	.hw_free =	i2sbus_record_hw_free,
 	.prepare =	i2sbus_record_prepare,
 	.trigger =	i2sbus_record_trigger,