FAILED: patch "[PATCH] pwm: imx-tpm: Count the number of enabled channels in probe" failed to apply to 6.6-stable tree

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 3962c24f2d14e8a7f8a23f56b7ce320523947342
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026050332-duly-bobbing-50af@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3962c24f2d14e8a7f8a23f56b7ce320523947342 Mon Sep 17 00:00:00 2001
From: "Viorel Suman (OSS)" <[email protected]>
Date: Wed, 11 Mar 2026 14:33:09 +0200
Subject: [PATCH] pwm: imx-tpm: Count the number of enabled channels in probe
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On a soft reset TPM PWM IP may preserve its internal state from previous runtime, therefore on a subsequent OS boot and driver probe "enable_count" value and TPM PWM IP internal channels "enabled" states may get unaligned. In consequence on a suspend/resume cycle the call "if (--tpm->enable_count == 0)" may lead to "enable_count" overflow the system being blocked from entering suspend due to:

if (tpm->enable_count > 0)

       return -EBUSY;

Fix the problem by counting the enabled channels in probe function.

index 5b399de16d60..80fdb3303400 100644
@@ -352,7 +352,7 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 	struct clk *clk;
 	void __iomem *base;
 	int ret;
-	unsigned int npwm;
+	unsigned int i, npwm;
 	u32 val;
 
 	base = devm_platform_ioremap_resource(pdev, 0);

@@ -382,6 +382,13 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 
 	mutex_init(&tpm->lock);
 
+	/* count the enabled channels */
+	for (i = 0; i < npwm; ++i) {
+		val = readl(base + PWM_IMX_TPM_CnSC(i));
+		if (FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val))
+			++tpm->enable_count;
+	}
+
 	ret = devm_pwmchip_add(&pdev->dev, chip);
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");

From: "Viorel Suman (OSS)" <[email protected]>

On a soft reset TPM PWM IP may preserve its internal state from previous runtime, therefore on a subsequent OS boot and driver probe "enable_count" value and TPM PWM IP internal channels "enabled" states may get unaligned. In consequence on a suspend/resume cycle the call "if (--tpm->enable_count == 0)" may lead to "enable_count" overflow the system being blocked from entering suspend due to:

if (tpm->enable_count > 0)

       return -EBUSY;

Fix the problem by counting the enabled channels in probe function.

---
 drivers/pwm/pwm-imx-tpm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

index 6591f8f84ce8..7a46bb49d51b 100644
@@ -350,6 +350,7 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 {
 	struct imx_tpm_pwm_chip *tpm;
 	int ret;
+	unsigned int i;
 	u32 val;
 
 	tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);

@@ -383,6 +384,13 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 
 	mutex_init(&tpm->lock);
 
+	/* count the enabled channels */
+	for (i = 0; i < tpm->chip.npwm; ++i) {
+		val = readl(tpm->base + PWM_IMX_TPM_CnSC(i));
+		if (FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val))
+			++tpm->enable_count;
+	}
+
 	ret = pwmchip_add(&tpm->chip);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);

base-commit: 258cf62a6dfde3c6a39d120a56a298f2ed6a8901

2.47.3

What is the git id of this commit?

thanks,

greg k-h

oops, sorry, I forgot to mention that

It's 3962c24f2d14e8a7f8a23f56b7ce320523947342.

Best regards
Uwe