USB: serial: mxuport: update number-of-ports encoding
Subsystems (2)
Johan Hovold
maintainerPATCH 1/1 USB: serial: mxuport: update number-of-ports encoding
In preparation for adding support for 3, 5, 6 and 7 port devices, replace the current one-bit-per-type encoding of the number of ports with a more compact four bit encoding (2..16 ports or undefined).
Signed-off-by Johan Hovold <[email protected]>
--- drivers/usb/serial/mxuport.c | 38 +++++++++++++++--------------------- 1 file changed, 16 insertions(+), 22 deletions(-)
drivers/usb/serial/mxuport.c +16 -22
@@ -146,11 +146,6 @@#define MX_WAIT_FOR_LOW_WATER 0x0040#define MX_WAIT_FOR_SEND_NEXT 0x0080 -#define MX_UPORT_2_PORT BIT(0) -#define MX_UPORT_4_PORT BIT(1) -#define MX_UPORT_8_PORT BIT(2) -#define MX_UPORT_16_PORT BIT(3) -/* This structure holds all of the local port information */ struct mxuport_port {u8 mcr_state;/* Last MCR state */
@@ -159,26 +154,31 @@ struct mxuport_port {spinlock_t spinlock;/* Protects msr_state */ }; +/* Encode number of ports (2..16 or undefined) */ +#define MX_PORTS_MASK GENMASK(3, 0) +#define MX_PORTS_OFFSET 1 +#define MX_PORTS (n) (((n) - MX_PORTS_OFFSET) & MX_PORTS_MASK) +/* Table of devices that work with this driver */ static const struct usb_device_id mxuport_idtable[] = { {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1250_PID ), - .driver_info =MX_UPORT_2_PORT }, + .driver_info =MX_PORTS (2 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1251_PID ), - .driver_info =MX_UPORT_2_PORT }, + .driver_info =MX_PORTS (2 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1410_PID ), - .driver_info =MX_UPORT_4_PORT }, + .driver_info =MX_PORTS (4 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1450_PID ), - .driver_info =MX_UPORT_4_PORT }, + .driver_info =MX_PORTS (4 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1451_PID ), - .driver_info =MX_UPORT_4_PORT }, + .driver_info =MX_PORTS (4 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1618_PID ), - .driver_info =MX_UPORT_8_PORT }, + .driver_info =MX_PORTS (8 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1658_PID ), - .driver_info =MX_UPORT_8_PORT }, + .driver_info =MX_PORTS (8 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1613_PID ), - .driver_info =MX_UPORT_16_PORT }, + .driver_info =MX_PORTS (16 ) }, {USB_DEVICE (MX_USBSERIAL_VID ,MX_UPORT1653_PID ), - .driver_info =MX_UPORT_16_PORT }, + .driver_info =MX_PORTS (16 ) }, {}/* Terminating entry */ };
@@ -942,14 +942,8 @@ static int mxuport_calc_num_ports(struct usb_serial *serial,int num_ports;int i; -if (features &MX_UPORT_2_PORT ) { - num_ports =2 ; - }else if (features &MX_UPORT_4_PORT ) { - num_ports =4 ; - }else if (features &MX_UPORT_8_PORT ) { - num_ports =8 ; - }else if (features &MX_UPORT_16_PORT ) { - num_ports =16 ; +if (features &MX_PORTS_MASK ) { + num_ports = (features &MX_PORTS_MASK ) +MX_PORTS_OFFSET ; }else {dev_warn (&serial->interface->dev,"unknown device, assuming two ports\n" );
Signature · 1 line
2.53.0
Quoted 8 lines · Johan Hovold
In preparation for adding support for 3, 5, 6 and 7 port devices, replace the current one-bit-per-type encoding of the number of ports with a more compact four bit encoding (2..16 ports or undefined).
Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/mxuport.c | 38 +++++++++++++++--------------------- 1 file changed, 16 insertions(+), 22 deletions(-)
Reviewed-by Greg Kroah-Hartman <[email protected]>
Johan Hovold
maintainerQuoted 11 lines · Greg Kroah-Hartman
Quoted 8 lines · Johan Hovold
In preparation for adding support for 3, 5, 6 and 7 port devices, replace the current one-bit-per-type encoding of the number of ports with a more compact four bit encoding (2..16 ports or undefined).
Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/mxuport.c | 38 +++++++++++++++--------------------- 1 file changed, 16 insertions(+), 22 deletions(-)Reviewed-by Greg Kroah-Hartman <[email protected]>
Thanks for reviewing. Now applied.
Johan