Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
Subsystems (2)
PATCH 1/1 Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() returns a listener from rfcomm_sk_list after dropping rfcomm_sk_list.lock, but it does not hold a reference on that socket. rfcomm_connect_ind() then locks the listener, queues a child on it, and may still notify it after unlocking it.
rfcomm_connect_ind() listener close
1. Look up the parent on 1. close() enters
rfcomm_sk_list. rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning the listener. starts tearing the listener down.
3. Later call lock_sock(parent), 3. rfcomm_sock_kill() unlinks the
bt_accept_enqueue(parent, ...), listener and drops its last
or the deferred-setup callback. reference.
Take a socket reference on the selected listener before leaving rfcomm_sk_list.lock, re-check that the parent is still in BT_LISTEN after locking it, cache the deferred-setup bit while the parent is locked, and drop the extra reference after the last parent use in rfcomm_connect_ind().
The buggy scenario involves two paths, with each column showing the order within that path:
rfcomm_connect_ind(): listener close:
1. Call 1. close() enters
rfcomm_get_sock_by_channel(BT_LISTEN, rfcomm_sock_release()
channel, &src)
2. Return the matched listener 2. rfcomm_sock_shutdown() runs
after the BT_LISTEN close path and
read_unlock(&rfcomm_sk_list.lock) rfcomm_sock_cleanup_listen(parent)
without sock_hold() sets parent->sk_state =
BT_CLOSED and SOCK_ZAPPED
3. Later call lock_sock(parent) 3. rfcomm_sock_release() calls
and bt_accept_enqueue(parent, sock_orphan(parent) and
sk, true) rfcomm_sock_kill(parent)
4. After release_sock(parent), 4. rfcomm_sock_kill() unlinks
read bt_sk(parent)->flags and the listener from
may call rfcomm_sk_list and sock_put()
parent->sk_state_change(parent) can free itThe lookup path drops rfcomm_sk_list.lock without a private reference, so listener close can mark the socket closed, unlink it, and free it before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or its deferred-setup callback.
rfcomm_lock serializes RFCOMM core work but does not serialize userspace close against rfcomm_sock_release() or rfcomm_sock_kill().
Sanitizer validation reported:
BUG: KASAN: slab-use-after-free in lock_sock_nested() Read of size 1 at addr ffff88810da92250 Call trace: dump_stack_lvl() (?:?) print_address_description() (mm/kasan/report.c:373) lock_sock_nested() (net/core/sock.c:3780) print_report() (?:?) __virt_addr_valid() (?:?) srso_alias_return_thunk() (arch/x86/include/asm/nospec-branch.h:375) kasan_addr_to_slab() (mm/kasan/common.c:45) kasan_report() (?:?) __kasan_check_byte() (mm/kasan/common.c:571) lock_acquire() (?:?) rcu_is_watching() (?:?) rfcomm_connect_ind() (net/bluetooth/rfcomm/sock.c:952) rfcomm_recv_pn() (net/bluetooth/rfcomm/core.c:1432) trace_clock_x86_tsc() (arch/x86/kernel/trace_clock.c:14) __lock_acquire() (kernel/locking/lockdep.c:5077) rfcomm_recv_mcc() (net/bluetooth/rfcomm/core.c:1645) do_raw_spin_lock() (?:?) mark_held_locks() (kernel/locking/lockdep.c:4308) rfcomm_recv_frame() (net/bluetooth/rfcomm/core.c:1738) rfcomm_process_rx() (net/bluetooth/rfcomm/core.c:1933) rfcomm_run() (net/bluetooth/rfcomm/core.c:2114) find_held_lock() (kernel/locking/lockdep.c:5340) _raw_spin_unlock_irqrestore() (kernel/locking/spinlock.c:196) lockdep_hardirqs_on() (?:?) __kthread_parkme() (kernel/kthread.c:259) kthread() (?:?) _raw_spin_unlock_irq() (kernel/locking/spinlock.c:204) ret_from_fork() (?:?) __switch_to() (?:?) ret_from_fork_asm() (?:?) kasan_save_stack() (mm/kasan/common.c:52) kasan_save_track() (mm/kasan/common.c:74) __kasan_kmalloc() (?:?) __kmalloc_noprof() (?:?) sk_prot_alloc() (net/core/sock.c:2233) sk_alloc() (?:?) bt_sock_alloc() (?:?) rfcomm_sock_alloc() (net/bluetooth/rfcomm/sock.c:271) rfcomm_sock_create() (net/bluetooth/rfcomm/sock.c:305) bt_sock_create() (net/bluetooth/af_bluetooth.c:116) __sock_create() (?:?) __sys_socket() (net/socket.c:1801) __x64_sys_socket() (?:?) do_syscall_64() (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe() (?:?) kasan_save_free_info() (?:?) __kasan_slab_free() (?:?) kfree() (?:?) __sk_destruct() (net/core/sock.c:2345) sk_destruct() (net/core/sock.c:2402) __sk_free() (net/core/sock.c:2417) sk_free() (net/core/sock.c:2428) rfcomm_sock_kill() (net/bluetooth/rfcomm/sock.c:192) rfcomm_sock_release() (net/bluetooth/rfcomm/sock.c:912) __sock_release() (net/socket.c:713)
---
net/bluetooth/rfcomm/sock.c +22 -4
@@ -122,7 +122,7 @@ static struct sock *__rfcomm_get_listen_sock_by_addr(u8 channel, bdaddr_t *src) }/* Find socket with channel and source bdaddr. -* Returns closest match. +* Returns closest match with an extra reference held. */ static struct sock *rfcomm_get_sock_by_channel (int state,u8 channel,bdaddr_t *src) {
@@ -136,15 +136,25 @@ static struct sock *rfcomm_get_sock_by_channel(int state, u8 channel, bdaddr_t *if (rfcomm_pi (sk)->channel == channel) {/* Exact match. */ -if (!bacmp (&rfcomm_pi (sk)->src, src)) +if (!bacmp (&rfcomm_pi (sk)->src, src)) { +sock_hold (sk);break ; + }/* Closest match */ -if (!bacmp (&rfcomm_pi (sk)->src,BDADDR_ANY )) +if (!bacmp (&rfcomm_pi (sk)->src,BDADDR_ANY )) { +if (sk1) +sock_put (sk1); + sk1 = sk; +sock_hold (sk1); + } } } +if (sk && sk1) +sock_put (sk1); +read_unlock (&rfcomm_sk_list.lock);return sk ? sk : sk1;
@@ -934,6 +944,7 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc * {struct sock *sk, *parent;bdaddr_t src, dst; +bool defer_setup = false;int result =0 ;BT_DBG ("session %p channel %d" , s, channel);
@@ -947,6 +958,11 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc *lock_sock (parent); +if (parent->sk_state !=BT_LISTEN ) + goto done; + + defer_setup =test_bit (BT_SK_DEFER_SETUP , &bt_sk (parent)->flags); +/* Check for backlog size */ if (sk_acceptq_is_full (parent)) {BT_DBG ("backlog full %d" , parent->sk_ack_backlog);
@@ -974,9 +990,11 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc * done:release_sock (parent); -if (test_bit (BT_SK_DEFER_SETUP , &bt_sk (parent)->flags)) +if (defer_setup) parent->sk_state_change (parent); +sock_put (parent); +return result; }
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1092078
---Test result---
Test Summary:
CheckPatch FAIL 0.77 seconds GitLint FAIL 0.34 seconds SubjectPrefix PASS 0.13 seconds BuildKernel PASS 24.98 seconds CheckAllWarning PASS 27.45 seconds CheckSparse PASS 26.44 seconds BuildKernel32 PASS 24.22 seconds TestRunnerSetup PASS 518.00 seconds TestRunner_rfcomm-tester PASS 63.49 seconds IncrementalBuild PASS 23.77 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?) #119:
The buggy scenario involves two paths, with each column showing the order within that path:
WARNING: The commit message has 'BUG: KASAN: ', perhaps it also needs a 'Fixes:' tag?
total: 0 errors, 2 warnings, 0 checks, 65 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14563150.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
23: B1 Line exceeds max length (91>80): "The buggy scenario involves two paths, with each column showing the order within that path:"
https://github.com/bluez/bluetooth-next/pull/160
---
Regards,
Linux Bluetooth