Skip to contentSkip to conversation

Bluetooth: btusb: Add support for Intel Lizard Peak2 (0x8087:0x0040)

PATCH Superseded Ravindra 3 participants 5 messages May 12 Bluetooth drivers

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Ravindra

author
#0 lore raw

PATCH 1/1 Bluetooth: btusb: Add support for Intel Lizard Peak2 (0x8087:0x0040)

Device from /sys/kernel/debug/usb/devices:

T:  Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0040 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/bluetooth/btusb.c +1 -0
index 572091e601f9..3f012c2a014a 100644
@@ -484,6 +484,7 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak2 */
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
 						     BTUSB_INTEL_NO_WBS_SUPPORT |
Signature · 1 line
2.43.0
Reviewed-by on v1 1/1
#1 lore raw

Dear Ravindra,

Thank you for your patch.

(Is the spelling for Lizard Peak2 really without a space before the 2?)

Am 12.05.26 um 08:20 schrieb Ravindra:

Quoted 42 lines

Device from /sys/kernel/debug/usb/devices:

T:  Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0040 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
---
  drivers/bluetooth/btusb.c | 1 +
  1 file changed, 1 insertion(+)
drivers/bluetooth/btusb.c +0 -0
index 572091e601f9..3f012c2a014a 100644

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 490

Quoted 7 lines
drivers/bluetooth/btusb.c +1 -0
@@ -484,6 +484,7 @@ static const struct usb_device_id quirks_table[] = {
  	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak2 */
  	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
  	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
  						     BTUSB_INTEL_NO_WBS_SUPPORT |

Kind regards,

Paul

author Reviewed-by Paul Menzel
#2 lore raw

________________________________________
From: Paul Menzel <[email protected]>
Sent: Tuesday, May 12, 2026 11:54 AM
To: Ravindra <[email protected]>
Cc: [email protected] <[email protected]>; Srivatsa, Ravishankar <[email protected]>; K, Kiran <[email protected]>; Tumkur Narayan, Chethan <[email protected]> Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Lizard Peak2 (0x8087:0x0040)

Dear Ravindra,

Thank you for your patch.

(Is the spelling for Lizard Peak2 really without a space before the 2?)
Yes, that is correct. According to the hardware specification and the firmware strings, "Lizard Peak 2" is written as a single word with a space.

Am 12.05.26 um 08:20 schrieb Ravindra:

Quoted 92 lines

Device from /sys/kernel/debug/usb/devices:

T:  Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0

D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1

P:  Vendor=8087 ProdID=0040 Rev= 0.00

C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA

I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms

E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms

I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms

I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms

I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms

I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms

I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

---

   drivers/bluetooth/btusb.c | 1 +

   1 file changed, 1 insertion(+)
drivers/bluetooth/btusb.c +0 -0

index 572091e601f9..3f012c2a014a 100644

--- a/drivers/bluetooth/btusb.c

+++ b/drivers/bluetooth/btusb.c

drivers/bluetooth/btusb.c +1 -0
@@ -484,6 +484,7 @@ static const struct usb_device_id quirks_table[] = {
 
         { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
 
         { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
 
         { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
 
+     { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak2 */
Quoted 5 lines

        { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },

        { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |

                                                     BTUSB_INTEL_NO_WBS_SUPPORT |

Kind regards,

Paul

author Reviewed-by Paul Menzel
#3 lore raw
In reply to Paul Menzel

________________________________________
From: Paul Menzel <[email protected]>
Sent: Tuesday, May 12, 2026 11:54 AM
To: Ravindra <[email protected]>
Cc: [email protected] <[email protected]>; Srivatsa, Ravishankar <[email protected]>; K, Kiran <[email protected]>; Tumkur Narayan, Chethan <[email protected]> Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Lizard Peak2 (0x8087:0x0040)

Dear Ravindra,

Thank you for your patch.

(Is the spelling for Lizard Peak2 really without a space before the 2?)
Yes, that is not correct. According to the hardware specification and the firmware strings, "Lizard Peak 2" is the correct one.

Am 12.05.26 um 08:20 schrieb Ravindra:

Quoted 92 lines

Device from /sys/kernel/debug/usb/devices:

T:  Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0

D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1

P:  Vendor=8087 ProdID=0040 Rev= 0.00

C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA

I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms

E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms

I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms

I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms

I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms

I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms

I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

---

   drivers/bluetooth/btusb.c | 1 +

   1 file changed, 1 insertion(+)
drivers/bluetooth/btusb.c +0 -0

index 572091e601f9..3f012c2a014a 100644

--- a/drivers/bluetooth/btusb.c

+++ b/drivers/bluetooth/btusb.c

drivers/bluetooth/btusb.c +1 -0
@@ -484,6 +484,7 @@ static const struct usb_device_id quirks_table[] = {
 
         { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
 
         { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
 
         { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
 
+     { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak2 */
Quoted 5 lines

        { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },

        { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |

                                                     BTUSB_INTEL_NO_WBS_SUPPORT |

Kind regards,

Paul

#4 lore raw
In reply to Ravindra

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1093290

---Test result---

Test Summary:

CheckPatch                    PASS      0.53 seconds
GitLint                       PASS      0.20 seconds
SubjectPrefix                 PASS      0.06 seconds
BuildKernel                   PASS      26.54 seconds
CheckAllWarning               PASS      29.03 seconds
CheckSparse                   PASS      27.30 seconds
BuildKernel32                 PASS      25.44 seconds
TestRunnerSetup               PASS      569.49 seconds
IncrementalBuild              PASS      24.94 seconds

https://github.com/bluez/bluetooth-next/pull/176

---
Regards,
Linux Bluetooth