Skip to contentSkip to conversation

net: phy: fix duplicate eth_phy binding

PATCH Superseded Pranav Tilak 2 participants 2 messages May 12 – May 13

Subsystems (2)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 net: phy: fix duplicate eth_phy binding

When both CONFIG_PHY_ETHERNET_ID and CONFIG_DM_ETH_PHY are enabled, eth_phy_binds_nodes() called from eth_post_bind() already binds the ethernet PHY node to eth_phy_generic_drv. However, phy_connect_phy_id() called via phy_connect() also binds the same PHY node, resulting in duplicate entries in the DM tree.

Fix this by checking at the beginning of phy_connect() whether the PHY is already bound via uclass_find_device_by_phandle(). If so, skip all generic binding methods and fall through to phy_find_by_mask(). Also assign phydev->node from the already bound DM device.

Fixes 68a4d1506109 ("net: phy: Bind ETH_PHY uclass driver to each new PHY")

---
Changes in v4:
- Removed IS_ENABLED(CONFIG_DM_ETH_PHY), use runtime check via uclass_find_device_by_phandle()
- Fix indentation of binding methods block
- Assign phydev->node from the bound DM device's ofnode
- Use phy_bound flag for clarity

Changes in v3:
- Moved duplicate binding check to beginning of phy_connect()

Changes in v2:
- Move duplicate binding check to caller phy_connect()
- Update commit description

 drivers/net/phy/phy.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)
drivers/net/phy/phy.c +20 -8
index d7e0c4fe02d..386d89aed24 100644
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/compiler.h>
+#include <dm/uclass-internal.h>
 
 /* Generic PHY support and helper functions */
 
@@ -927,29 +928,40 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
 {
 	struct phy_device *phydev = NULL;
 	uint mask = (addr >= 0) ? (1 << addr) : 0xffffffff;
-
+	struct udevice *phy_dev;
+	bool phy_bound;
+
+	/* Skip binding if PHY already bound by eth_phy_binds_nodes(). */
+	phy_bound = !uclass_find_device_by_phandle(UCLASS_ETH_PHY, dev,
+						       "phy-handle",
+						       &phy_dev);
+	if (!phy_bound) {
 #ifdef CONFIG_PHY_FIXED
-	phydev = phy_connect_fixed(bus, dev);
+		phydev = phy_connect_fixed(bus, dev);
 #endif
 
 #ifdef CONFIG_PHY_NCSI
-	if (!phydev && interface == PHY_INTERFACE_MODE_NCSI)
-		phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
+		if (!phydev && interface == PHY_INTERFACE_MODE_NCSI)
+			phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
 #endif
 
 #ifdef CONFIG_PHY_ETHERNET_ID
-	if (!phydev)
-		phydev = phy_connect_phy_id(bus, dev, addr);
+		if (!phydev)
+			phydev = phy_connect_phy_id(bus, dev, addr);
 #endif
 
 #ifdef CONFIG_PHY_XILINX_GMII2RGMII
-	if (!phydev)
-		phydev = phy_connect_gmii2rgmii(bus, dev);
+		if (!phydev)
+			phydev = phy_connect_gmii2rgmii(bus, dev);
 #endif
+	}
 
 	if (!phydev)
 		phydev = phy_find_by_mask(bus, mask);
 
+	if (phydev && phy_bound && !ofnode_valid(phydev->node))
+		phydev->node = dev_ofnode(phy_dev);
+
 	if (phydev)
 		phy_connect_dev(phydev, dev, interface);
 	else
Signature · 1 line
2.34.1
#1 lore raw

On 5/12/26 2:23 PM, Pranav Tilak wrote:

[...]

drivers/net/phy/phy.c struct phy_device *phy_connect(struct mii_dev *bus, int addr, · line 938

Quoted 13 lines
drivers/net/phy/phy.c +8 -1
@@ -927,29 +928,40 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
  {
  	struct phy_device *phydev = NULL;
  	uint mask = (addr >= 0) ? (1 << addr) : 0xffffffff;
-
+	struct udevice *phy_dev;
+	bool phy_bound;
+
+	/* Skip binding if PHY already bound by eth_phy_binds_nodes(). */
+	phy_bound = !uclass_find_device_by_phandle(UCLASS_ETH_PHY, dev,
+						       "phy-handle",
+						       &phy_dev);
+	if (!phy_bound) {

The double negation is not needed, simply use int data type .

Also, try "goto exit" ...

Quoted 16 lines
drivers/net/phy/phy.c +4 -5
  #ifdef CONFIG_PHY_FIXED
-	phydev = phy_connect_fixed(bus, dev);
+		phydev = phy_connect_fixed(bus, dev);
  #endif
 
  #ifdef CONFIG_PHY_NCSI
-	if (!phydev && interface == PHY_INTERFACE_MODE_NCSI)
-		phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
+		if (!phydev && interface == PHY_INTERFACE_MODE_NCSI)
+			phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
  #endif
 
  #ifdef CONFIG_PHY_ETHERNET_ID
-	if (!phydev)
-		phydev = phy_connect_phy_id(bus, dev, addr);
+		if (!phydev)

drivers/net/phy/phy.c struct phy_device *phy_connect(struct mii_dev *bus, int addr, · line 957

Quoted 10 lines
drivers/net/phy/phy.c +4 -2
+			phydev = phy_connect_phy_id(bus, dev, addr);
  #endif
 
  #ifdef CONFIG_PHY_XILINX_GMII2RGMII
-	if (!phydev)
-		phydev = phy_connect_gmii2rgmii(bus, dev);
+		if (!phydev)
+			phydev = phy_connect_gmii2rgmii(bus, dev);
  #endif
+	}

exit:

This may simplify the patch .

Quoted 9 lines
drivers/net/phy/phy.c +3 -0
  	if (!phydev)
  		phydev = phy_find_by_mask(bus, mask);
 
+	if (phydev && phy_bound && !ofnode_valid(phydev->node))
+		phydev->node = dev_ofnode(phy_dev);
+
  	if (phydev)
  		phy_connect_dev(phydev, dev, interface);
  	else

[...]