mmc-utils: lsmmc: Add 'mmc list' command
PATCH 1/1 mmc-utils: lsmmc: Add 'mmc list' command
From: Torstein EIde <[email protected]>
Add a 'mmc list' command that scans /sys/bus/mmc/devices/, resolves each card's sysfs path, and prints a one-line summary per device.
find_block_devname() maps a sysfs device path back to its mmcblkN name by scanning /sys/class/block/mmcblkN/device symlinks.
print_list_entry() parses the CID register and formats a fixed-width table row with device name, /dev path, bus type, manufacturer, product, revision, serial number, and manufacturing date.
The header is printed once before the first result. Devices without a readable cid file are skipped silently via access() so unrelated sysfs entries do not produce spurious error messages.
--- docs/HOWTO.rst | 5 ++ lsmmc.c | 162 +++++++++++++++++++++++++++++++++++++++++++++++++ mmc.c | 5 ++ mmc_cmds.h | 1 + 4 files changed, 173 insertions(+)
docs/HOWTO.rst +8 -0
@@ -84,6 +84,11 @@ Running mmc-utils sysfs: /sys/devices/platform/fe320000.mmc/mmc_host/mmc1/mmc1:aaaa SCR Register: 0235800000000000 + ``list`` + List all MMC/SD devices present on the system. Output is a table with + columns: DEVICE (sysfs name), DEV (/dev path), TYPE (MMC or SD), + MANUFACTURER, PRODUCT, REV, SERIAL, and DATE. + + Example:: + + $ mmc list
+ DEVICE DEV TYPE MANUFACTURER PRODUCT REV SERIAL DATE + mmc0:0001 /dev/mmcblk0 MMC Samsung MAG4FA 1.0 0x1a2b3c4d 2021-jan + mmc1:aaaa /dev/mmcblk1 SD SanDisk SP32G 8.0 0x5e6f7a8b 2020-mar
+
``ffu <image name> <device> [chunk-bytes]``
Default mode. Run Field Firmware Update with <image name> on <device>. [chunk-bytes] is optional and defaults to its max - 512k. Should be in decimal bytes and sector aligned.
lsmmc.c +162 -0
174 lines not on this page · raw message
mmc.c +5 -0
@@ -292,6 +292,11 @@ static struct Command commands[] = { "4. The MMC will perform a soft reset, if your system cannot handle that do not use the boot operation from mmc-utils.\n", NULL }, + { do_list,0 , +"list" ,"\n" +"List all MMC/SD devices with their /dev path and CID info." , +NULL + }, { NULL, 0, NULL, NULL } };
mmc_cmds.h +1 -0
@@ -49,6 +49,7 @@ int do_opt_ffu4(int nargs, char **argv);int do_read_scr (int argc,char **argv);int do_read_cid (int argc,char **argv);int do_read_csd (int argc,char **argv); +int do_list (int nargs,char **argv);int do_erase (int nargs,char **argv);int do_general_cmd_read (int nargs,char **argv);int do_softreset (int nargs,char **argv);
Signature · 1 line
2.53.0