Skip to contentSkip to conversation

Bluetooth: bnep: reject short frames before parsing

PATCH Superseded Zhang Cen 2 participants 2 messages May 19

Subsystems (2)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Zhang Cen

author
#0 lore raw

PATCH v3 1/1 Bluetooth: bnep: reject short frames before parsing

A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload.

Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads.

KASAN report as below:

BUG: KASAN: slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
Read of size 1 at addr ffff88800c0f7909
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Call trace:
  dump_stack_lvl+0xb3/0x140 (?:?)
  print_address_description+0x57/0x3a0 (?:?)
  bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
  print_report+0xb9/0x2b0 (?:?)
  __virt_addr_valid+0x1ba/0x3a0 (?:?)
  srso_alias_return_thunk+0x5/0xfbef5 (?:?)
  kasan_addr_to_slab+0x21/0x60 (?:?)
  kasan_report+0xe0/0x110 (?:?)
  process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
  worker_thread+0x65c/0xe40 (?:?)
  __kthread_parkme+0x184/0x230 (?:?)
  kthread+0x35e/0x470 (?:?)
  _raw_spin_unlock_irq+0x28/0x50 (?:?)
  ret_from_fork+0x586/0x870 (?:?)
  __switch_to+0x74f/0xdc0 (?:?)
  ret_from_fork_asm+0x1a/0x30 (?:?)
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

---
v3:
Use skb_pull_data() with NULL checks in bnep_rx_frame() instead of direct skb->len guards before fixed header dereferences.

 net/bluetooth/bnep/core.c | 51 ++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 20 deletions(-)
net/bluetooth/bnep/core.c +31 -20
index 853c8d7644b55..de9c872e2c9cb 100644
@@ -206,14 +206,11 @@ static int bnep_ctrl_set_mcfilter(struct bnep_session *s, u8 *data, int len)
 	return 0;
 }
 
-static int bnep_rx_control(struct bnep_session *s, void *data, int len)
+static int bnep_rx_control_cmd(struct bnep_session *s, u8 cmd, void *data,
+			       int len)
 {
-	u8  cmd = *(u8 *)data;
 	int err = 0;
 
-	data++;
-	len--;
-
 	switch (cmd) {
 	case BNEP_CMD_NOT_UNDERSTOOD:
 	case BNEP_SETUP_CONN_RSP:
@@ -254,6 +251,14 @@ static int bnep_rx_control(struct bnep_session *s, void *data, int len)
 	return err;
 }
 
+static int bnep_rx_control(struct bnep_session *s, void *data, int len)
+{
+	if (len < 1)
+		return -EILSEQ;
+
+	return bnep_rx_control_cmd(s, *(u8 *)data, data + 1, len - 1);
+}
+
 static int bnep_rx_extension(struct bnep_session *s, struct sk_buff *skb)
 {
 	struct bnep_ext_hdr *h;
@@ -299,19 +304,26 @@ static int bnep_rx_frame(struct bnep_session *s, struct sk_buff *skb)
 {
 	struct net_device *dev = s->dev;
 	struct sk_buff *nskb;
+	u8 *data;
 	u8 type, ctrl_type;
 
 	dev->stats.rx_bytes += skb->len;
 
-	type = *(u8 *) skb->data;
-	skb_pull(skb, 1);
-	ctrl_type = *(u8 *)skb->data;
+	data = skb_pull_data(skb, sizeof(type));
+	if (!data)
+		goto badframe;
+	type = *data;
 
 	if ((type & BNEP_TYPE_MASK) >= sizeof(__bnep_rx_hlen))
 		goto badframe;
 
 	if ((type & BNEP_TYPE_MASK) == BNEP_CONTROL) {
-		if (bnep_rx_control(s, skb->data, skb->len) < 0) {
+		data = skb_pull_data(skb, sizeof(ctrl_type));
+		if (!data)
+			goto badframe;
+		ctrl_type = *data;
+
+		if (bnep_rx_control_cmd(s, ctrl_type, skb->data, skb->len) < 0) {
 			dev->stats.tx_errors++;
 			kfree_skb(skb);
 			return 0;
@@ -325,23 +337,22 @@ static int bnep_rx_frame(struct bnep_session *s, struct sk_buff *skb)
 		/* Verify and pull ctrl message since it's already processed */
 		switch (ctrl_type) {
 		case BNEP_SETUP_CONN_REQ:
-			/* Pull: ctrl type (1 b), len (1 b), data (len bytes) */
-			if (!skb_pull(skb, 2 + *(u8 *)(skb->data + 1) * 2))
+			/* Pull: len (1 b), data (len * 2 bytes) */
+			data = skb_pull_data(skb, 1);
+			if (!data)
+				goto badframe;
+			if (!skb_pull(skb, *data * 2))
 				goto badframe;
 			break;
 		case BNEP_FILTER_MULTI_ADDR_SET:
-		case BNEP_FILTER_NET_TYPE_SET: {
-			u8 *hdr;
-
-			/* Pull ctrl type (1 b) + len (2 b) */
-			hdr = skb_pull_data(skb, 3);
-			if (!hdr)
+		case BNEP_FILTER_NET_TYPE_SET:
+			/* Pull: len (2 b), data (len bytes) */
+			data = skb_pull_data(skb, sizeof(u16));
+			if (!data)
 				goto badframe;
-			/* Pull data (len bytes); length is big-endian */
-			if (!skb_pull(skb, get_unaligned_be16(&hdr[1])))
+			if (!skb_pull(skb, get_unaligned_be16(data)))
 				goto badframe;
 			break;
-		}
 		default:
 			kfree_skb(skb);
 			return 0;
Signature · 1 line
2.43.0
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1097332

---Test result---

Test Summary:

CheckPatch                    PASS      0.77 seconds
GitLint                       FAIL      0.33 seconds
SubjectPrefix                 PASS      0.13 seconds
BuildKernel                   PASS      25.40 seconds
CheckAllWarning               PASS      27.62 seconds
CheckSparse                   PASS      26.64 seconds
BuildKernel32                 PASS      24.54 seconds
TestRunnerSetup               PASS      530.16 seconds
TestRunner_bnep-tester        PASS      18.87 seconds
IncrementalBuild              PASS      24.16 seconds

Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v3] Bluetooth: bnep: reject short frames before parsing

WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
42: B1 Line exceeds max length (123>80): "Use skb_pull_data() with NULL checks in bnep_rx_frame() instead of direct skb->len guards before fixed header dereferences."

https://github.com/bluez/bluetooth-next/pull/216

---
Regards,
Linux Bluetooth