Skip to contentSkip to conversation

drm: tyr: use lifetime-bound IoMem

PATCH Applied Danilo Krummrich 7 participants 13 messages May 29 – Jun 2

Subsystems (4)
lore
Share & tools
lore

Danilo Krummrich

author maintainer
#0 lore raw

cover drm: tyr: use lifetime-bound IoMem

Adopt the driver core lifetime infrastructure for tyr.

Separate the driver type from the driver data and use lifetime-bound IoMem directly in probe instead of wrapping it in Devres and Arc, simplifying register access.

Changes in v2:
- Don't return Result from GpuInfo::new()
- Use "drm/tyr:" commit message prefix

Danilo Krummrich (2):
drm/tyr: separate driver type from driver data
drm/tyr: use IoMem directly instead of Devres

 drivers/gpu/drm/tyr/driver.rs | 29 ++++++++++++-----------------
 drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
 drivers/gpu/drm/tyr/tyr.rs    |  4 ++--
 3 files changed, 19 insertions(+), 31 deletions(-)

base-commit: a3e50e7279996cd987001fd8a3db36e72665f8f7

Signature · 1 line
2.54.0
author maintainer
#1 lore raw

PATCH v2 1/2 drm/tyr: separate driver type from driver data

Introduce TyrPlatformDriver as a unit struct for the platform::Driver trait implementation and keep TyrPlatformDriverData for the private driver data.

---
 drivers/gpu/drm/tyr/driver.rs | 10 ++++++----
 drivers/gpu/drm/tyr/tyr.rs    |  4 ++--
 2 files changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/tyr/driver.rs +6 -4
index 98732afc096f..6276e9743c32 100644
@@ -51,6 +51,8 @@
 /// Convenience type alias for the DRM device type for this driver.
 pub(crate) type TyrDrmDevice = drm::Device<TyrDrmDriver>;
 
+pub(crate) struct TyrPlatformDriver;
+
 #[pin_data(PinnedDrop)]
 pub(crate) struct TyrPlatformDriverData {
     _device: ARef<TyrDrmDevice>,
@@ -93,22 +95,22 @@ fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
 kernel::of_device_table!(
     OF_TABLE,
     MODULE_OF_TABLE,
-    <TyrPlatformDriverData as platform::Driver>::IdInfo,
+    <TyrPlatformDriver as platform::Driver>::IdInfo,
     [
         (of::DeviceId::new(c"rockchip,rk3588-mali"), ()),
         (of::DeviceId::new(c"arm,mali-valhall-csf"), ())
     ]
 );
 
-impl platform::Driver for TyrPlatformDriverData {
+impl platform::Driver for TyrPlatformDriver {
     type IdInfo = ();
-    type Data<'bound> = Self;
+    type Data<'bound> = TyrPlatformDriverData;
     const OF_ID_TABLE: Option<of::IdTable<Self::IdInfo>> = Some(&OF_TABLE);
 
     fn probe<'bound>(
         pdev: &'bound platform::Device<Core<'_>>,
         _info: Option<&'bound Self::IdInfo>,
-    ) -> impl PinInit<Self, Error> + 'bound {
+    ) -> impl PinInit<Self::Data<'bound>, Error> + 'bound {
         let core_clk = Clk::get(pdev.as_ref(), Some(c"core"))?;
         let stacks_clk = OptionalClk::get(pdev.as_ref(), Some(c"stacks"))?;
         let coregroup_clk = OptionalClk::get(pdev.as_ref(), Some(c"coregroup"))?;
drivers/gpu/drm/tyr/tyr.rs +2 -2
index 9432ddd6b5b8..95cda7b0962f 100644
@@ -5,7 +5,7 @@
 //! The name "Tyr" is inspired by Norse mythology, reflecting Arm's tradition of
 //! naming their GPUs after Nordic mythological figures and places.
 
-use crate::driver::TyrPlatformDriverData;
+use crate::driver::TyrPlatformDriver;
 
 mod driver;
 mod file;
@@ -14,7 +14,7 @@
 mod regs;
 
 kernel::module_platform_driver! {
-    type: TyrPlatformDriverData,
+    type: TyrPlatformDriver,
     name: "tyr",
     authors: ["The Tyr driver authors"],
     description: "Arm Mali Tyr DRM driver",
Signature · 1 line
2.54.0
reviewer Reviewed-by on v2 1/2
#2 lore raw

Re: [PATCH v2 1/2] drm/tyr: separate driver type from driver data

Quoted 9 lines · Danilo Krummrich

Introduce TyrPlatformDriver as a unit struct for the platform::Driver trait implementation and keep TyrPlatformDriverData for the private driver data.

author maintainer
#3 lore raw

PATCH v2 2/2 drm/tyr: use IoMem directly instead of Devres

In reply to Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

---
 drivers/gpu/drm/tyr/driver.rs | 19 ++++++-------------
 drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
 2 files changed, 11 insertions(+), 25 deletions(-)
drivers/gpu/drm/tyr/driver.rs +6 -13
index 6276e9743c32..227ea2adccea 100644
@@ -6,11 +6,9 @@
         OptionalClk, //
     },
     device::{
-        Bound,
         Core,
         Device, //
     },
-    devres::Devres,
     dma::{
         Device as DmaDevice,
         DmaMask, //
@@ -30,7 +28,6 @@
     sizes::SZ_2M,
     sync::{
         aref::ARef,
-        Arc,
         Mutex, //
     },
     time, //
@@ -44,7 +41,7 @@
     regs::gpu_control::*, //
 };
 
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;
 
 pub(crate) struct TyrDrmDriver;
 
@@ -74,15 +71,11 @@ pub(crate) struct TyrDrmDeviceData {
     pub(crate) gpu_info: GpuInfo,
 }
 
-fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
-    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
+fn issue_soft_reset(dev: &Device, iomem: &IoMem<'_>) -> Result {
+    iomem.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(GPU_IRQ_RAWSTAT))
-        },
+        || Ok(iomem.read(GPU_IRQ_RAWSTAT)),
         |status| status.reset_completed(),
         time::Delta::from_millis(1),
         time::Delta::from_millis(100),
@@ -123,12 +116,12 @@ fn probe<'bound>(
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
         gpu_info.log(pdev.as_ref());
 
         let pa_bits = MMU_FEATURES::from_raw(gpu_info.mmu_features)
drivers/gpu/drm/tyr/gpu.rs +5 -12
index 652556026f50..592b8bb16eba 100644
@@ -9,7 +9,6 @@
         Bound,
         Device, //
     },
-    devres::Devres,
     io::{
         poll,
         register::Array,
@@ -40,10 +39,8 @@
 pub(crate) struct GpuInfo(pub(crate) uapi::drm_panthor_gpu_info);
 
 impl GpuInfo {
-    pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
-        let io = (*iomem).access(dev)?;
-
-        Ok(Self(uapi::drm_panthor_gpu_info {
+    pub(crate) fn new(io: &IoMem<'_>) -> Self {
+        Self(uapi::drm_panthor_gpu_info {
             gpu_id: io.read(GPU_ID).into_raw(),
             gpu_rev: io.read(REVIDR).into_raw(),
             csf_id: io.read(CSF_ID).into_raw(),
@@ -81,7 +78,7 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
             pad: 0,
             //GPU_FEATURES register is not available; it was introduced in arch 11.x.
             gpu_features: 0,
-        }))
+        })
     }
 
     pub(crate) fn log(&self, dev: &Device<Bound>) {
@@ -163,15 +160,11 @@ struct GpuModels {
 }];
 
 /// Powers on the l2 block.
-pub(crate) fn l2_power_on(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
+pub(crate) fn l2_power_on(dev: &Device, io: &IoMem<'_>) -> Result {
     io.write_reg(L2_PWRON_LO::zeroed().with_const_request::<1>());
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(L2_READY_LO))
-        },
+        || Ok(io.read(L2_READY_LO)),
         |status| status.ready() == 1,
         Delta::from_millis(1),
         Delta::from_millis(100),
Signature · 1 line
2.54.0
maintainer
#4 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

Quoted 12 lines · Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

drivers/gpu/drm/tyr/driver.rs line 44

Quoted 2 lines
drivers/gpu/drm/tyr/driver.rs +1 -1
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;

It'd make more sense for me to put 'b or 'bound here.

drivers/gpu/drm/tyr/driver.rs fn probe<'bound>( · line 124

Quoted 11 lines
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
drivers/gpu/drm/tyr/driver.rs +2 -2
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);

While this change is fine, I notice that we don't actually keep the iomem alive past the probe method. I assume we're going to need that, which leads to the question of whether we can store the iomem in the places we need it.

As far as I can tell, we can store it in TyrPlatformDriverData but not in TyrDrmDeviceData, is that right?

I guess it does make sense because the io memory goes away if the underlying platform device (the bus) goes away, even if the drm device still exists due to open fds from userspace.

Alice

author maintainer
#5 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

Quoted 9 lines · Alice Ryhl
Quoted 8 lines · Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

Quoted 8 lines

drivers/gpu/drm/tyr/driver.rs line 44

Quoted 6 lines
drivers/gpu/drm/tyr/driver.rs +1 -1
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;

It'd make more sense for me to put 'b or 'bound here.

You can name it 'b of course, but the semantics for 'bound has been agreed to describe the lifetime of something actually being in place for the entire duration of a device being bound to a driver, which isn't the case here.

Quoted 13 lines

drivers/gpu/drm/tyr/driver.rs fn probe<'bound>( · line 124

Quoted 11 lines
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
drivers/gpu/drm/tyr/driver.rs +2 -2
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
Quoted 7 lines

While this change is fine, I notice that we don't actually keep the iomem alive past the probe method. I assume we're going to need that, which leads to the question of whether we can store the iomem in the places we need it.

As far as I can tell, we can store it in TyrPlatformDriverData but not in TyrDrmDeviceData, is that right?

TyrDrmDeviceData will eventually become the drm::Registration data, so it will be a ForLt type as well and IoMem<'a> can directly be stored in there.

The DRM device private data being tied to the lifetime of the DRM device itself doesn't seem to be useful anymore after IOCTLs won't potentially reach into the driver after device unbind anymore.

In the meantime (or even after this change, although I wouldn't recommend that), you can call into_devres() before storing it in TyrDrmDeviceData.

#6 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

In reply to Alice Ryhl
Quoted 31 lines · Alice Ryhl
Quoted 12 lines · Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

drivers/gpu/drm/tyr/driver.rs line 44

Quoted 2 lines
drivers/gpu/drm/tyr/driver.rs +1 -1
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;

It'd make more sense for me to put 'b or 'bound here.

drivers/gpu/drm/tyr/driver.rs fn probe<'bound>( · line 124

Quoted 11 lines
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
drivers/gpu/drm/tyr/driver.rs +2 -2
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
Quoted 7 lines

While this change is fine, I notice that we don't actually keep the iomem alive past the probe method. I assume we're going to need that, which leads to the question of whether we can store the iomem in the places we need it.

As far as I can tell, we can store it in TyrPlatformDriverData but not in TyrDrmDeviceData, is that right?

I'm still getting my head around how this applies to tyr's firmware series, but yes we stop storing iomem in TyrDrmDeviceData, but we won't store it in TyrPlatformDriverData.
Instead there is a new struct "RegistrationData" that will store the iomem like this:

#[vtable]

impl drm::Driver for TyrDrmDriver {
    type Data = TyrDrmDeviceData;
    type RegistrationData = TyrDrmRegistrationData<'static>;

And then in probe something like:

let reg_data = try_pin_init!(TyrDrmRegistrationData {
pdev: platform.clone(),
fw: firmware,
clks <- new_mutex!(Clocks {
core: core_clk,
stacks: stacks_clk,
coregroup: coregroup_clk,
}),
regulators <- new_mutex!(Regulators {
_mali: mali_regulator,
_sram: sram_regulator,
}),
iomem,
gpu_info,
});

drm::driver::Registration::new_foreign_owned(ddev, pdev.as_ref(), reg_data, 0)?;

Quoted 6 lines

I guess it does make sense because the io memory goes away if the underlying platform device (the bus) goes away, even if the drm device still exists due to open fds from userspace.

Alice

reviewer
#7 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

Quoted 46 lines · Deborah Brouwer
Quoted 31 lines · Alice Ryhl
Quoted 12 lines · Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

drivers/gpu/drm/tyr/driver.rs line 44

Quoted 2 lines
drivers/gpu/drm/tyr/driver.rs +1 -1
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;

It'd make more sense for me to put 'b or 'bound here.

drivers/gpu/drm/tyr/driver.rs fn probe<'bound>( · line 124

Quoted 11 lines
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
drivers/gpu/drm/tyr/driver.rs +2 -2
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
Quoted 7 lines

While this change is fine, I notice that we don't actually keep the iomem alive past the probe method. I assume we're going to need that, which leads to the question of whether we can store the iomem in the places we need it.

As far as I can tell, we can store it in TyrPlatformDriverData but not in TyrDrmDeviceData, is that right?

I'm still getting my head around how this applies to tyr's firmware series, but yes we stop storing iomem in TyrDrmDeviceData, but we won't store it in TyrPlatformDriverData.
Instead there is a new struct "RegistrationData" that will store the iomem like this:

Quoted 5 lines

#[vtable]

impl drm::Driver for TyrDrmDriver {
    type Data = TyrDrmDeviceData;
    type RegistrationData = TyrDrmRegistrationData<'static>;

I am not sure what the distinction even mean for a class device?

There's 1 device per registration, so they're equal. Am I missing something?

Best,
Gary

Quoted 27 lines

And then in probe something like:

let reg_data = try_pin_init!(TyrDrmRegistrationData {
pdev: platform.clone(),
fw: firmware,
clks <- new_mutex!(Clocks {
core: core_clk,
stacks: stacks_clk,
coregroup: coregroup_clk,
}),
regulators <- new_mutex!(Regulators {
_mali: mali_regulator,
_sram: sram_regulator,
}),
iomem,
gpu_info,
});

drm::driver::Registration::new_foreign_owned(ddev, pdev.as_ref(), reg_data, 0)?;

Quoted 6 lines

I guess it does make sense because the io memory goes away if the underlying platform device (the bus) goes away, even if the drm device still exists due to open fds from userspace.

Alice

author maintainer
#8 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

Quoted 3 lines · Gary Guo

I am not sure what the distinction even mean for a class device?

There's 1 device per registration, so they're equal. Am I missing something?

The existing DRM device private data's lifetime is tied to the lifetime of the DRM device itself, which makes sense as long as IOCTLs are not guarded against driver unbind and can still reach into the driver after driver unbind.

Once that is changed, this doesn't make sense anymore, the driver structures are then tied to the lifetime of the Registration.

Any handles that userspace may keep open beyond this should be handled by the subsystem; at this point there is no more HW state the driver would need to take care of.

Thus, the private data tied to the lifetime of the DRM device won't be needed anymore, see also [1].

[1] https://lore.kernel.org/dri-devel/[email protected]/

Tested-by on v2 2/2
#9 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

In reply to Danilo Krummrich
Quoted 138 lines · Danilo Krummrich

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

---
 drivers/gpu/drm/tyr/driver.rs | 19 ++++++-------------
 drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
 2 files changed, 11 insertions(+), 25 deletions(-)
drivers/gpu/drm/tyr/driver.rs +6 -13
index 6276e9743c32..227ea2adccea 100644
@@ -6,11 +6,9 @@
         OptionalClk, //
     },
     device::{
-        Bound,
         Core,
         Device, //
     },
-    devres::Devres,
     dma::{
         Device as DmaDevice,
         DmaMask, //
@@ -30,7 +28,6 @@
     sizes::SZ_2M,
     sync::{
         aref::ARef,
-        Arc,
         Mutex, //
     },
     time, //
@@ -44,7 +41,7 @@
     regs::gpu_control::*, //
 };
 
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;
 
 pub(crate) struct TyrDrmDriver;
 
@@ -74,15 +71,11 @@ pub(crate) struct TyrDrmDeviceData {
     pub(crate) gpu_info: GpuInfo,
 }
 
-fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
-    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
+fn issue_soft_reset(dev: &Device, iomem: &IoMem<'_>) -> Result {
+    iomem.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(GPU_IRQ_RAWSTAT))
-        },
+        || Ok(iomem.read(GPU_IRQ_RAWSTAT)),
         |status| status.reset_completed(),
         time::Delta::from_millis(1),
         time::Delta::from_millis(100),
@@ -123,12 +116,12 @@ fn probe<'bound>(
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
         gpu_info.log(pdev.as_ref());
 
         let pa_bits = MMU_FEATURES::from_raw(gpu_info.mmu_features)
drivers/gpu/drm/tyr/gpu.rs +5 -12
index 652556026f50..592b8bb16eba 100644
@@ -9,7 +9,6 @@
         Bound,
         Device, //
     },
-    devres::Devres,
     io::{
         poll,
         register::Array,
@@ -40,10 +39,8 @@
 pub(crate) struct GpuInfo(pub(crate) uapi::drm_panthor_gpu_info);
 
 impl GpuInfo {
-    pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
-        let io = (*iomem).access(dev)?;
-
-        Ok(Self(uapi::drm_panthor_gpu_info {
+    pub(crate) fn new(io: &IoMem<'_>) -> Self {
+        Self(uapi::drm_panthor_gpu_info {
             gpu_id: io.read(GPU_ID).into_raw(),
             gpu_rev: io.read(REVIDR).into_raw(),
             csf_id: io.read(CSF_ID).into_raw(),
@@ -81,7 +78,7 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
             pad: 0,
             //GPU_FEATURES register is not available; it was introduced in arch 11.x.
             gpu_features: 0,
-        }))
+        })
     }
 
     pub(crate) fn log(&self, dev: &Device<Bound>) {
@@ -163,15 +160,11 @@ struct GpuModels {
 }];
 
 /// Powers on the l2 block.
-pub(crate) fn l2_power_on(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
+pub(crate) fn l2_power_on(dev: &Device, io: &IoMem<'_>) -> Result {
     io.write_reg(L2_PWRON_LO::zeroed().with_const_request::<1>());
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(L2_READY_LO))
-        },
+        || Ok(io.read(L2_READY_LO)),
         |status| status.ready() == 1,
         Delta::from_millis(1),
         Delta::from_millis(100),
Signature · 1 line
2.54.0

Looks good to me!

Reviewed-by on v2 2/2
#10 lore raw

Re: [PATCH v2 2/2] drm/tyr: use IoMem directly instead of Devres

In reply to Danilo Krummrich
Quoted 11 lines · On Fri, 29 May 2026 02:00:54 +0200 Danilo Krummrich <[email protected]> wrote:

Now that IoMem is lifetime-parameterized, use it directly in probe rather than wrapping it in Devres and Arc. The I/O memory mapping is only used during probe and not stored in driver data, so device-managed revocation is unnecessary.

This removes the Devres access(dev) pattern from issue_soft_reset(), GpuInfo::new(), and l2_power_on(), simplifying register access.

Quoted 124 lines
---
 drivers/gpu/drm/tyr/driver.rs | 19 ++++++-------------
 drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
 2 files changed, 11 insertions(+), 25 deletions(-)
drivers/gpu/drm/tyr/driver.rs +6 -13
index 6276e9743c32..227ea2adccea 100644
@@ -6,11 +6,9 @@
         OptionalClk, //
     },
     device::{
-        Bound,
         Core,
         Device, //
     },
-    devres::Devres,
     dma::{
         Device as DmaDevice,
         DmaMask, //
@@ -30,7 +28,6 @@
     sizes::SZ_2M,
     sync::{
         aref::ARef,
-        Arc,
         Mutex, //
     },
     time, //
@@ -44,7 +41,7 @@
     regs::gpu_control::*, //
 };
 
-pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
+pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;
 
 pub(crate) struct TyrDrmDriver;
 
@@ -74,15 +71,11 @@ pub(crate) struct TyrDrmDeviceData {
     pub(crate) gpu_info: GpuInfo,
 }
 
-fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
-    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
+fn issue_soft_reset(dev: &Device, iomem: &IoMem<'_>) -> Result {
+    iomem.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(GPU_IRQ_RAWSTAT))
-        },
+        || Ok(iomem.read(GPU_IRQ_RAWSTAT)),
         |status| status.reset_completed(),
         time::Delta::from_millis(1),
         time::Delta::from_millis(100),
@@ -123,12 +116,12 @@ fn probe<'bound>(
         let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
 
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
-        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
+        let iomem = request.iomap_sized::<SZ_2M>()?;
 
         issue_soft_reset(pdev.as_ref(), &iomem)?;
         gpu::l2_power_on(pdev.as_ref(), &iomem)?;
 
-        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
+        let gpu_info = GpuInfo::new(&iomem);
         gpu_info.log(pdev.as_ref());
 
         let pa_bits = MMU_FEATURES::from_raw(gpu_info.mmu_features)
drivers/gpu/drm/tyr/gpu.rs +5 -12
index 652556026f50..592b8bb16eba 100644
@@ -9,7 +9,6 @@
         Bound,
         Device, //
     },
-    devres::Devres,
     io::{
         poll,
         register::Array,
@@ -40,10 +39,8 @@
 pub(crate) struct GpuInfo(pub(crate) uapi::drm_panthor_gpu_info);
 
 impl GpuInfo {
-    pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
-        let io = (*iomem).access(dev)?;
-
-        Ok(Self(uapi::drm_panthor_gpu_info {
+    pub(crate) fn new(io: &IoMem<'_>) -> Self {
+        Self(uapi::drm_panthor_gpu_info {
             gpu_id: io.read(GPU_ID).into_raw(),
             gpu_rev: io.read(REVIDR).into_raw(),
             csf_id: io.read(CSF_ID).into_raw(),
@@ -81,7 +78,7 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
             pad: 0,
             //GPU_FEATURES register is not available; it was introduced in arch 11.x.
             gpu_features: 0,
-        }))
+        })
     }
 
     pub(crate) fn log(&self, dev: &Device<Bound>) {
@@ -163,15 +160,11 @@ struct GpuModels {
 }];
 
 /// Powers on the l2 block.
-pub(crate) fn l2_power_on(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
+pub(crate) fn l2_power_on(dev: &Device, io: &IoMem<'_>) -> Result {
     io.write_reg(L2_PWRON_LO::zeroed().with_const_request::<1>());
 
     poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(L2_READY_LO))
-        },
+        || Ok(io.read(L2_READY_LO)),
         |status| status.ready() == 1,
         Delta::from_millis(1),
         Delta::from_millis(100),
maintainer Reviewed-by on the v1 series
#11 lore raw
In reply to Danilo Krummrich
Quoted 18 lines · Danilo Krummrich

Adopt the driver core lifetime infrastructure for tyr.

Separate the driver type from the driver data and use lifetime-bound IoMem directly in probe instead of wrapping it in Devres and Arc, simplifying register access.

Changes in v2:
- Don't return Result from GpuInfo::new()
- Use "drm/tyr:" commit message prefix

Danilo Krummrich (2):
drm/tyr: separate driver type from driver data
drm/tyr: use IoMem directly instead of Devres

Quoted 10 lines
drivers/gpu/drm/tyr/driver.rs | 29 ++++++++++++-----------------
drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
drivers/gpu/drm/tyr/tyr.rs    |  4 ++--
3 files changed, 19 insertions(+), 31 deletions(-)

base-commit: a3e50e7279996cd987001fd8a3db36e72665f8f7

Signature · 1 line
2.54.0
maintainer Applied
#12 lore raw
In reply to Danilo Krummrich
Quoted 11 lines · Danilo Krummrich

Adopt the driver core lifetime infrastructure for tyr.

Separate the driver type from the driver data and use lifetime-bound IoMem directly in probe instead of wrapping it in Devres and Arc, simplifying register access.

Changes in v2:
- Don't return Result from GpuInfo::new()
- Use "drm/tyr:" commit message prefix

Quoted 8 lines

Danilo Krummrich (2):
drm/tyr: separate driver type from driver data
drm/tyr: use IoMem directly instead of Devres

 drivers/gpu/drm/tyr/driver.rs | 29 ++++++++++++-----------------
 drivers/gpu/drm/tyr/gpu.rs    | 17 +++++------------
 drivers/gpu/drm/tyr/tyr.rs    |  4 ++--
 3 files changed, 19 insertions(+), 31 deletions(-)

Applied to drm-rust-next. Thanks!