Skip to contentSkip to conversation

conf/machine: fix typos in ARM and x86 README files

PATCH In review Prabhudasu Vatala 2 participants 3 messages Jun 1 – Jun 14

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 conf/machine: fix typos in ARM and x86 README files

Correct spelling errors in the machine include README documentation for both ARM and x86 architectures to improve clarity.

ARM changes:
- Fix TUNE_PKGACH -> TUNE_PKGARCH.
- Fix "definiton" -> "definition".
- Fix "Curently" -> "Currently".
- Fix "specificed" -> "specified".

x86 changes:
- Fix "define" -> "defined".
- Fix "to to" duplication.

---
 meta/conf/machine/include/arm/README | 6 +++---
 meta/conf/machine/include/x86/README | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
meta/conf/machine/include/arm/README +3 -3
index c5637798e6..bccbb1bdee 100644
@@ -10,7 +10,7 @@ of the existence of the "bigendian" feature in a given tune.
 
 A small set of ARM specific variables have been defined to allow 
 TUNE_PKGARCH to be automatically defined.  Optimized tunings must NOT 
-change the definiton of TUNE_PKGARCH.  TUNE_PKGACH:tune-<tune> will be 
+change the definition of TUNE_PKGARCH.  TUNE_PKGARCH:tune-<tune> will be 
 ignored.  The format of the package arch is enforced by the TUNE_PKGARCH
 default.  The format must be of the form:
 <armversion>[t][e][hf][b][-vfp][-neon]
@@ -22,14 +22,14 @@ ARMPKGARCH - This is the core package arch component specified by each
 tuning.  This is the primary identifier of a tuning.  Usual values are:
 arm, armv4, armv5, armv6, armv7a, etc.
 
-ARMPKGSFX_THUMB - This is the thumb specific suffix.  Curently it is 
+ARMPKGSFX_THUMB - This is the thumb specific suffix.  Currently it is 
 defined in feature-arm-thumb.inc.
 
 ARMPKGSFX_DSP - This is the DSP specific suffix.  Currently this is set 
 to 'e' when on armv5 and the dsp feature is enabled.
 
 ARMPKGSFX_EABI - This is the eabi specific suffix.  There are currently 
-two defined ABIs specificed, standard EABI and Hard Float (VFP) EABI.  
+two defined ABIs specified, standard EABI and Hard Float (VFP) EABI.  
 When the callconvention-hard is enabled, "hf" is specified, otherwise it 
 is blank.
 
meta/conf/machine/include/x86/README +2 -2
index 05aee533a7..f0a1882d81 100644
@@ -4,7 +4,7 @@
 Most of the items for the X86 architectures are defined in the single
 arch-x86 file.
 
-Three ABIs are define, m32, mx32 and m64.
+Three ABIs are defined, m32, mx32 and m64.
 
 The following is the list of X86 specific variables:
 
@@ -17,7 +17,7 @@ The TUNE_PKGARCH is defined as follows:
 TUNE_PKGARCH = ${TUNE_PKGARCH:tune-${DEFAULTTUNE}}
 
 The package architecture for 32-bit targets is historical and generally
-set to to match the core compatible processor type, i.e. i386.
+set to match the core compatible processor type, i.e. i386.
 
 For 64-bit architectures, the architecture is expected to end in '_64'.
 
Signature · 1 line
2.53.0
#1 lore raw

Hello Prabhudasu

I could not find an equivalent patch for wrynose (though I did find one for master)
Please submit to wrynose and ping this mail once this is done

thx a lot
Jérémy

Quoted 71 lines · Prabhudasu Vatala via lists.openembedded.org

Correct spelling errors in the machine include README documentation for both ARM and x86 architectures to improve clarity.

ARM changes:
- Fix TUNE_PKGACH -> TUNE_PKGARCH.
- Fix "definiton" -> "definition".
- Fix "Curently" -> "Currently".
- Fix "specificed" -> "specified".

x86 changes:
- Fix "define" -> "defined".
- Fix "to to" duplication.

---
 meta/conf/machine/include/arm/README | 6 +++---
 meta/conf/machine/include/x86/README | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
meta/conf/machine/include/arm/README +3 -3
index c5637798e6..bccbb1bdee 100644
@@ -10,7 +10,7 @@ of the existence of the "bigendian" feature in a given tune.
 
 A small set of ARM specific variables have been defined to allow 
 TUNE_PKGARCH to be automatically defined.  Optimized tunings must NOT 
-change the definiton of TUNE_PKGARCH.  TUNE_PKGACH:tune-<tune> will be 
+change the definition of TUNE_PKGARCH.  TUNE_PKGARCH:tune-<tune> will be 
 ignored.  The format of the package arch is enforced by the TUNE_PKGARCH
 default.  The format must be of the form:
 <armversion>[t][e][hf][b][-vfp][-neon]
@@ -22,14 +22,14 @@ ARMPKGARCH - This is the core package arch component specified by each
 tuning.  This is the primary identifier of a tuning.  Usual values are:
 arm, armv4, armv5, armv6, armv7a, etc.
 
-ARMPKGSFX_THUMB - This is the thumb specific suffix.  Curently it is 
+ARMPKGSFX_THUMB - This is the thumb specific suffix.  Currently it is 
 defined in feature-arm-thumb.inc.
 
 ARMPKGSFX_DSP - This is the DSP specific suffix.  Currently this is set 
 to 'e' when on armv5 and the dsp feature is enabled.
 
 ARMPKGSFX_EABI - This is the eabi specific suffix.  There are currently 
-two defined ABIs specificed, standard EABI and Hard Float (VFP) EABI.  
+two defined ABIs specified, standard EABI and Hard Float (VFP) EABI.  
 When the callconvention-hard is enabled, "hf" is specified, otherwise it 
 is blank.
 
meta/conf/machine/include/x86/README +2 -2
index 05aee533a7..f0a1882d81 100644
@@ -4,7 +4,7 @@
 Most of the items for the X86 architectures are defined in the single
 arch-x86 file.
 
-Three ABIs are define, m32, mx32 and m64.
+Three ABIs are defined, m32, mx32 and m64.
 
 The following is the list of X86 specific variables:
 
@@ -17,7 +17,7 @@ The TUNE_PKGARCH is defined as follows:
 TUNE_PKGARCH = ${TUNE_PKGARCH:tune-${DEFAULTTUNE}}
 
 The package architecture for 32-bit targets is historical and generally
-set to to match the core compatible processor type, i.e. i386.
+set to match the core compatible processor type, i.e. i386.
 
 For 64-bit architectures, the architecture is expected to end in '_64'.
 
author
#2 lore raw

*Hi Jérémy,*

*I have successfully submitted the backport patch for the wrynose branch to the list.*

*Thanks a lot!**Prabhudasu*

Quoted 89 lines · Jeremy Rosen

Hello Prabhudasu

I could not find an equivalent patch for wrynose (though I did find one for master)
Please submit to wrynose and ping this mail once this is done

thx a lot
Jérémy

Quoted 13 lines · Prabhudasu Vatala via lists.openembedded.org

Correct spelling errors in the machine include README documentation for both ARM and x86 architectures to improve clarity.

ARM changes:
- Fix TUNE_PKGACH -> TUNE_PKGARCH.
- Fix "definiton" -> "definition".
- Fix "Curently" -> "Currently".
- Fix "specificed" -> "specified".

x86 changes:
- Fix "define" -> "defined".
- Fix "to to" duplication.

Review

Quoted 7 lines
---
 meta/conf/machine/include/arm/README | 6 +++---
 meta/conf/machine/include/x86/README | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
(quoted diff) +0 -0

b/meta/conf/machine/include/arm/README

meta/conf/machine/include/arm/README of the existence of the "bigendian" feature in a given

Quoted 4 lines

index c5637798e6..bccbb1bdee 100644

meta/conf/machine/include/arm/README +0 -0
@@ -10,7 +10,7 @@ of the existence of the "bigendian" feature in a given

tune.

meta/conf/machine/include/arm/README of the existence of the "bigendian" feature in a given tune.

Quoted 5 lines
meta/conf/machine/include/arm/README +1 -1
 A small set of ARM specific variables have been defined to allow
 TUNE_PKGARCH to be automatically defined.  Optimized tunings must NOT
-change the definiton of TUNE_PKGARCH.  TUNE_PKGACH:tune-<tune> will be
+change the definition of TUNE_PKGARCH.  TUNE_PKGARCH:tune-<tune> will

be

meta/conf/machine/include/arm/README ARMPKGARCH - This is the core package arch component

Quoted 4 lines
meta/conf/machine/include/arm/README +0 -0
 ignored.  The format of the package arch is enforced by the TUNE_PKGARCH
 default.  The format must be of the form:
 <armversion>[t][e][hf][b][-vfp][-neon]
@@ -22,14 +22,14 @@ ARMPKGARCH - This is the core package arch component

specified by each

Quoted 4 lines
meta/conf/machine/include/arm/README +0 -1
 tuning.  This is the primary identifier of a tuning.  Usual values are:
 arm, armv4, armv5, armv6, armv7a, etc.
 
-ARMPKGSFX_THUMB - This is the thumb specific suffix.  Curently it is

meta/conf/machine/include/arm/README ARMPKGARCH - This is the core package arch component specified by each

Quoted 10 lines
meta/conf/machine/include/arm/README +2 -1
+ARMPKGSFX_THUMB - This is the thumb specific suffix.  Currently it is
 defined in feature-arm-thumb.inc.
 
 ARMPKGSFX_DSP - This is the DSP specific suffix.  Currently this is set
 to 'e' when on armv5 and the dsp feature is enabled.
 
 ARMPKGSFX_EABI - This is the eabi specific suffix.  There are currently
-two defined ABIs specificed, standard EABI and Hard Float (VFP) EABI.
+two defined ABIs specified, standard EABI and Hard Float (VFP) EABI.
 When the callconvention-hard is enabled, "hf" is specified, otherwise

it

Review

Quoted 3 lines
meta/conf/machine/include/arm/README +0 -0
 is blank.
 
(quoted diff) +0 -0

b/meta/conf/machine/include/x86/README

Quoted 21 lines

index 05aee533a7..f0a1882d81 100644

meta/conf/machine/include/x86/README +2 -2
@@ -4,7 +4,7 @@
 Most of the items for the X86 architectures are defined in the single
 arch-x86 file.
 
-Three ABIs are define, m32, mx32 and m64.
+Three ABIs are defined, m32, mx32 and m64.
 
 The following is the list of X86 specific variables:
 
@@ -17,7 +17,7 @@ The TUNE_PKGARCH is defined as follows:
 TUNE_PKGARCH = ${TUNE_PKGARCH:tune-${DEFAULTTUNE}}
 
 The package architecture for 32-bit targets is historical and generally
-set to to match the core compatible processor type, i.e. i386.
+set to match the core compatible processor type, i.e. i386.
 
 For 64-bit architectures, the architecture is expected to end in '_64'.