mmc: Update the value of ios.drv_type at the location where fixed_drv_type is used
PATCH 1/1 mmc: Update the value of ios.drv_type at the location where fixed_drv_type is used
Modify the value of "fixed-emmc-driver-type" in the device tree, but when checking "cat /sys/kernel/debug/mmc/ios",
it is found that the driver type has not changed.
So, update the value of ios.drv_type at the location where fixed_drv_type is used.
--- drivers/mmc/core/mmc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/mmc/core/mmc.c +4 -3
@@ -1361,14 +1361,15 @@ static void mmc_select_driver_type(struct mmc_card *card) card_drv_type = card->ext_csd.raw_driver_strength |mmc_driver_type_mask (0 ); -if (fixed_drv_type >=0 ) +if (fixed_drv_type >=0 ) { drive_strength = card_drv_type &mmc_driver_type_mask (fixed_drv_type) ? fixed_drv_type :0 ; -else + card->host->ios.drv_type = drive_strength; + }else { drive_strength =mmc_select_drive_strength (card, card->ext_csd.hs200_max_dtr, card_drv_type, &drv_type); - + } card->drive_strength = drive_strength;if (fixed_drv_type >=0 && drive_strength)
Signature · 1 line
2.34.1
PATCH 1/1 mmc: Update the value of ios.drv_type at the location where fixed_drv_type is used
Due to the failure of the previous email transmission, I am forwarding it again.
-----邮件原件-----
发件人: baozhu.liu <[email protected]>
发送时间: 2026年6月2日 14:10
收件人: [email protected]
抄送: [email protected]; [email protected]; Liu Lucas/刘保柱 <[email protected]> 主题: [PATCH] mmc: Update the value of ios.drv_type at the location where fixed_drv_type is used
Modify the value of "fixed-emmc-driver-type" in the device tree, but when checking "cat /sys/kernel/debug/mmc/ios", it is found that the driver type has not changed. So, update the value of ios.drv_type at the location where fixed_drv_type is used.
--- drivers/mmc/core/mmc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/mmc/core/mmc.c +4 -3
@@ -1361,14 +1361,15 @@ static void mmc_select_driver_type(struct mmc_card *card) card_drv_type = card->ext_csd.raw_driver_strength |mmc_driver_type_mask (0 ); -if (fixed_drv_type >=0 ) +if (fixed_drv_type >=0 ) { drive_strength = card_drv_type &mmc_driver_type_mask (fixed_drv_type) ? fixed_drv_type :0 ; -else + card->host->ios.drv_type = drive_strength; + }else { drive_strength =mmc_select_drive_strength (card, card->ext_csd.hs200_max_dtr, card_drv_type, &drv_type); - + } card->drive_strength = drive_strength;if (fixed_drv_type >=0 && drive_strength)
--
2.34.1