Skip to contentSkip to conversation

docs-mm-damon-design-fix-three-typos.patch removed from -mm tree

merged mm-stable Andrew Morton 1 participant 1 message Jun 2

lore
Share & tools
lore

Andrew Morton

author tree notice Applied
#0 lore raw

The quilt patch titled
Subject: Docs/mm/damon/design: fix three typos
has been removed from the -mm tree. Its filename was
docs-mm-damon-design-fix-three-typos.patch

This patch was dropped because it was merged into the mm-stable branch of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

------------------------------------------------------
From: Sakurai Shun <[email protected]>
Subject: Docs/mm/damon/design: fix three typos
Date: Tue, 19 May 2026 18:21:00 -0700

L140: "unsinged" -> "unsigned"
L371: "sampleing" -> "sampling"
L387: "multipled" -> "multiplied"

---

 Documentation/mm/damon/design.rst |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/mm/damon/design.rst renamed from Documentation/mm/damon/design.rst~docs-mm-damon-design-fix-three-typos +3 -3
@@ -147,7 +147,7 @@ as Idle page tracking does.
 Address Unit
 ------------
 
-DAMON core layer uses ``unsinged long`` type for monitoring target address
+DAMON core layer uses ``unsigned long`` type for monitoring target address
 ranges.  In some cases, the address space for a given operations set could be
 too large to be handled with the type.  ARM (32-bit) with large physical
 address extension is an example.  For such cases, a per-operations set
@@ -417,7 +417,7 @@ with theoretical maximum ``nr_accesses``
 ``aggregation interval / sampling interval``.
 
 The mechanism calculates the ratio of access events for ``aggrs`` aggregations,
-and increases or decrease the ``sampleing interval`` and ``aggregation
+and increases or decrease the ``sampling interval`` and ``aggregation
 interval`` in same ratio, if the observed access ratio is lower or higher than
 the target, respectively.  The ratio of the intervals change is decided in
 proportion to the distance between current samples ratio and the target ratio.
@@ -433,7 +433,7 @@ The tuning is turned off by default, and
 As a rule of thumbs and the Parreto principle, 4% access samples ratio target
 is recommended.  Note that Parreto principle (80/20 rule) has applied twice.
 That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source)
-to capture 64% (80% multipled by 80%) real access events (outcomes).
+to capture 64% (80% multiplied by 80%) real access events (outcomes).
 
 To know how user-space can use this feature via :ref:`DAMON sysfs interface
 <sysfs_interface>`, refer to :ref:`intervals_goal

_

Patches currently in -mm which might be from [email protected] are