Skip to contentSkip to conversation

crypto: atmel-tdes - use scatterlist length before DMA mapping

PATCH In review Thorsten Blum 2 participants 2 messages Jun 11 – Jul 5

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 crypto: atmel-tdes - use scatterlist length before DMA mapping

Using sg_dma_len() is only valid after mapping the scatterlist with dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping to compare input/output lengths and to compute the transfer count.

Use the original scatterlist lengths before DMA mapping to avoid reading stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y.

Drop the output scatterlist length in the fast path since it is equal to ->in_sg->length and does not change the transfer count.

Fixes 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes 1f858040c2f7 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")

---
Changes in v2:
- Drop ->out_sg->length in the fast path (Herbert)
- v1: https://lore.kernel.org/lkml/[email protected]/

---
 drivers/crypto/atmel-tdes.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/crypto/atmel-tdes.c +2 -3
index 643e507f9c02..d380f6741a2c 100644
@@ -463,14 +463,13 @@ static int atmel_tdes_crypt_start(struct atmel_tdes_dev *dd)
 			IS_ALIGNED(dd->out_sg->length, dd->ctx->block_size);
 		fast = in && out;
 
-		if (sg_dma_len(dd->in_sg) != sg_dma_len(dd->out_sg))
+		if (dd->in_sg->length != dd->out_sg->length)
 			fast = 0;
 	}
 
 
 	if (fast)  {
-		count = min_t(size_t, dd->total, sg_dma_len(dd->in_sg));
-		count = min_t(size_t, count, sg_dma_len(dd->out_sg));
+		count = min_t(size_t, dd->total, dd->in_sg->length);
 
 		err = dma_map_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE);
 		if (!err) {
maintainer
#1 lore raw
Quoted 14 lines · Thorsten Blum

Using sg_dma_len() is only valid after mapping the scatterlist with dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping to compare input/output lengths and to compute the transfer count.

Use the original scatterlist lengths before DMA mapping to avoid reading stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y.

Drop the output scatterlist length in the fast path since it is equal to ->in_sg->length and does not change the transfer count.

Fixes 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes 1f858040c2f7 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Quoted 7 lines

---
Changes in v2:
- Drop ->out_sg->length in the fast path (Herbert)
- v1: https://lore.kernel.org/lkml/[email protected]/

---
 drivers/crypto/atmel-tdes.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Patch applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt