Skip to contentSkip to conversation

ASoC: tlv320aic3x: restrict CLKDIV bypass Q values in dual-rate mode

PATCH In review Sen Wang 2 participants 2 messages Jun 16 – Jun 18

Subsystems (3)
lore
Share & tools
lore

Sen Wang

author maintainer
#0 lore raw

PATCH 1/1 ASoC: tlv320aic3x: restrict CLKDIV bypass Q values in dual-rate mode

The datasheet documents that when the PLL is disabled and dual-rate mode is enabled, only Q values {4, 8, 9, 12, 16} are valid for the CLKDIV bypass path; all other Q values produce invalid bitclock output.

The existing loop iterates Q from 2 to 17 without this restriction, causing silent audio failure when an out-of-spec Q is picked.

Restrict the Q search to the allowed set in dual-rate mode.

Fixes 4f9c16ccfa26 ("[ALSA] soc - tlv320aic3x - revisit clock setup")
---
 sound/soc/codecs/tlv320aic3x.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)
sound/soc/codecs/tlv320aic3x.c +19 -6
index eea8ca285f8e..0e5e8002cd01 100644
@@ -1049,11 +1049,13 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 			   struct snd_pcm_hw_params *params,
 			   struct snd_soc_dai *dai)
 {
+	static const u8 dual_rate_q[] = {4, 8, 9, 12, 16};
 	struct snd_soc_component *component = dai->component;
 	struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
 	int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
 	u8 data, j, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
 	u16 d, pll_d = 1;
+	bool dual_rate;
 	int clk;
 	int width = aic3x->slot_width;
 
@@ -1079,14 +1081,25 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 
 	/* Fsref can be 44100 or 48000 */
 	fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000;
+	dual_rate = params_rate(params) >= 64000;
 
 	/* Try to find a value for Q which allows us to bypass the PLL and
 	 * generate CODEC_CLK directly. */
-	for (pll_q = 2; pll_q < 18; pll_q++)
-		if (aic3x->sysclk / (128 * pll_q) == fsref) {
-			bypass_pll = 1;
-			break;
+	if (dual_rate) {
+		for (int i = 0; i < ARRAY_SIZE(dual_rate_q); i++) {
+			pll_q = dual_rate_q[i];
+			if (aic3x->sysclk / (128 * pll_q) == fsref) {
+				bypass_pll = 1;
+				break;
+			}
 		}
+	} else {
+		for (pll_q = 2; pll_q < 18; pll_q++)
+			if (aic3x->sysclk / (128 * pll_q) == fsref) {
+				bypass_pll = 1;
+				break;
+			}
+	}
 
 	if (bypass_pll) {
 		pll_q &= 0xf;
@@ -1106,13 +1119,13 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 	 * right DAC to right channel input */
 	data = (LDAC2LCH | RDAC2RCH);
 	data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000;
-	if (params_rate(params) >= 64000)
+	if (dual_rate)
 		data |= DUAL_RATE_MODE;
 	snd_soc_component_write(component, AIC3X_CODEC_DATAPATH_REG, data);
 
 	/* codec sample rate select */
 	data = (fsref * 20) / params_rate(params);
-	if (params_rate(params) < 64000)
+	if (!dual_rate)
 		data /= 2;
 	data /= 5;
 	data -= 2;
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 1 line · Sen Wang

ASoC: tlv320aic3x: restrict CLKDIV bypass Q values in dual-rate mode

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.2

Thanks!

[1/1] ASoC: tlv320aic3x: restrict CLKDIV bypass Q values in dual-rate mode

      https://git.kernel.org/broonie/sound/c/fdf043f5f3ba

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark