Skip to contentSkip to conversation

drm/i915/display: Program TRANS_VTOTAL from mode vtotal

PATCH Superseded Mitul Golani 1 participant 1 message Jun 17

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 drm/i915/display: Program TRANS_VTOTAL from mode vtotal

There are monitors being sensitive to MSA and end up blanking out when we override Vtotal, DP transcoder uses TRANS_VTOTAL to derive MSA VTotal. Avoid overriding crtc_vtotal to 1 on platform which supports VRR Timing generator and always program VTOTAL from mode timing in transcoder timing paths.

Bspec: 70001

Cc Ankit Nautiyal <[email protected]>
Cc Ville Syrjälä <[email protected]>
Cc Suraj Kandpal <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 17 -----------------
 drivers/gpu/drm/i915/display/intel_vrr.c     | 10 ----------
 2 files changed, 27 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -17
index e2e4b00a8fa9..eb54f20b1859 100644
@@ -2731,15 +2731,6 @@ static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_sta
 		       HSYNC_START(adjusted_mode->crtc_hsync_start - 1) |
 		       HSYNC_END(adjusted_mode->crtc_hsync_end - 1));
 
-	/*
-	 * For platforms that always use VRR Timing Generator, the VTOTAL.Vtotal
-	 * bits are not required. Since the support for these bits is going to
-	 * be deprecated in upcoming platforms, avoid writing these bits for the
-	 * platforms that do not use legacy Timing Generator.
-	 */
-	if (intel_vrr_always_use_vrr_tg(display))
-		crtc_vtotal = 1;
-
 	intel_de_write(display, TRANS_VTOTAL(display, cpu_transcoder),
 		       VACTIVE(crtc_vdisplay - 1) |
 		       VTOTAL(crtc_vtotal - 1));
@@ -2826,14 +2817,6 @@ static void intel_set_transcoder_timings_lrr(const struct intel_crtc_state *crtc
 	intel_de_write(display, TRANS_VSYNC(display, cpu_transcoder),
 		       VSYNC_START(adjusted_mode->crtc_vsync_start - 1) |
 		       VSYNC_END(adjusted_mode->crtc_vsync_end - 1));
-	/*
-	 * For platforms that always use VRR Timing Generator, the VTOTAL.Vtotal
-	 * bits are not required. Since the support for these bits is going to
-	 * be deprecated in upcoming platforms, avoid writing these bits for the
-	 * platforms that do not use legacy Timing Generator.
-	 */
-	if (intel_vrr_always_use_vrr_tg(display))
-		crtc_vtotal = 1;
 
 	/*
 	 * The double buffer latch point for TRANS_VTOTAL
drivers/gpu/drm/i915/display/intel_vrr.c +0 -10
index e03b5daac5be..bd90282b2ad2 100644
@@ -1097,16 +1097,6 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)
 			crtc_state->vrr.vmin += intel_vrr_vmin_flipline_offset(display);
 		}
 
-		/*
-		 * For platforms that always use VRR Timing Generator, the VTOTAL.Vtotal
-		 * bits are not filled. Since for these platforms TRAN_VMIN is always
-		 * filled with crtc_vtotal, use TRAN_VRR_VMIN to get the vtotal for
-		 * adjusted_mode.
-		 */
-		if (intel_vrr_always_use_vrr_tg(display))
-			crtc_state->hw.adjusted_mode.crtc_vtotal =
-				intel_vrr_vmin_vtotal(crtc_state);
-
 		if (HAS_AS_SDP(display)) {
 			trans_vrr_vsync =
 				intel_de_read(display,
Signature · 1 line
2.48.1