Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
PATCH 1/1 Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode 0x2005 errors.
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 |
Signature · 1 line
2.54.0
Luiz Augusto von Dentz
maintainerHi Tibor,
Quoted 6 lines · Tibor Harcsa
Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode
0x2005errors.
Need the contents of /sys/kernel/debug/usb/devices (use git log driver/bluetooth/btusb.c to see what it is typical output).
Quoted 21 lines
Signed-off-by Tibor Harcsa <[email protected]>--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +2
-1@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 | --2.54.0
Signature · 1 line
Luiz Augusto von Dentz
A message that is not in the archive (sent off-list or not yet received): CAN2GrM=0wVS03c3zoCwWAJTXrUkRiUhtyJfqprMAhwTKUGzOeQ@mail.gmail.com
Luiz Augusto von Dentz
maintainerHi Tibor,
Quoted 30 lines · Tibor Harcsa
Hi Luiz,
Thanks. Here is the requested
/sys/kernel/debug/usb/devicesoutput for the affected controller:P: Vendor=13d3 ProdID=3503 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusbE: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Quoted 3 lines
This is the device that shows the BLE scan failure unless it is handled as QCA Rome.
Signed-off-by Tibor Harcsa <[email protected]>
Respin the patch with this information included.
Quoted 44 lines
PS earlier troubleshooting info is stored here:
https://github.com/tiborh/bt-troubleshootingQuoted 39 lines · Luiz Augusto von Dentz
Hi Tibor,
Quoted 6 lines · Tibor Harcsa
Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode
0x2005errors.Need the contents of
/sys/kernel/debug/usb/devices(use git logdriver/bluetooth/btusb.cto see what it is typical output).Quoted 19 lines
Signed-off-by Tibor Harcsa <[email protected]>--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +2
-1@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 | --Quoted 2 lines
2.54.0
--
Luiz Augusto von Dentz
Signature · 1 line
Luiz Augusto von Dentz
resending, because the previous one was bounced back by the mail lists.
Quoted 78 lines · Tibor Harcsa
Hi Luiz,
Thanks. Here is the requested
/sys/kernel/debug/usb/devicesoutput for the affected controller:P: Vendor=13d3 ProdID=3503 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusbE: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1msThis is the device that shows the BLE scan failure unless it is handled as QCA Rome.
Signed-off-by Tibor Harcsa <[email protected]>PS earlier troubleshooting info is stored here:
https://github.com/tiborh/bt-troubleshootingQuoted 39 lines · Luiz Augusto von Dentz
Hi Tibor,
Quoted 6 lines · Tibor Harcsa
Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode
0x2005errors.Need the contents of
/sys/kernel/debug/usb/devices(use git logdriver/bluetooth/btusb.cto see what it is typical output).Quoted 19 lines
Signed-off-by Tibor Harcsa <[email protected]>--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +2
-1@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 | --Quoted 2 lines
2.54.0
--
Luiz Augusto von Dentz
PATCH v2 1/1 Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
In reply to Tibor HarcsaAdd the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode 0x2005 errors.
The device reports the following in /sys/kernel/debug/usb/devices:
P: Vendor=13d3 ProdID=3503 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 |
Signature · 1 line
2.54.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1118472
---Test result---
Test Summary:
CheckPatch FAIL 1.14 seconds VerifyFixes PASS 0.31 seconds VerifySignedoff PASS 0.24 seconds GitLint PASS 0.47 seconds SubjectPrefix PASS 0.19 seconds BuildKernel PASS 26.78 seconds CheckAllWarning PASS 28.63 seconds CheckSparse PASS 27.54 seconds BuildKernel32 PASS 25.77 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 486.04 seconds IncrementalBuild PASS 25.22 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2] Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
WARNING: Non-standard signature: Co-authored-by:
#135:
total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14652253.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/373
---
Regards,
Linux Bluetooth
PATCH v2 1/1 Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
In reply to Tibor HarcsaAdd the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode 0x2005 errors.
The device reports the following in /sys/kernel/debug/usb/devices:
P: Vendor=13d3 ProdID=3503 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -297,6 +297,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3503), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 |
Signature · 1 line
2.54.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1118481
---Test result---
Test Summary:
CheckPatch PENDING 94.38 seconds VerifyFixes PASS 17.55 seconds VerifySignedoff PENDING 30.09 seconds GitLint PASS 36.39 seconds SubjectPrefix PASS 15.88 seconds BuildKernel PASS 24.99 seconds CheckAllWarning PASS 44.18 seconds CheckSparse PASS 44.49 seconds BuildKernel32 PASS 26.69 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 454.66 seconds TestRunner_l2cap-tester FAIL 57.85 seconds TestRunner_iso-tester PASS 78.17 seconds TestRunner_bnep-tester PASS 18.66 seconds TestRunner_mgmt-tester FAIL 209.38 seconds TestRunner_rfcomm-tester PASS 29.51 seconds TestRunner_sco-tester PASS 32.86 seconds TestRunner_ioctl-tester PASS 26.18 seconds TestRunner_mesh-tester FAIL 27.19 seconds TestRunner_smp-tester PASS 24.07 seconds TestRunner_userchan-tester PASS 20.24 seconds TestRunner_6lowpan-tester PASS 22.66 seconds IncrementalBuild PASS 25.24 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script Output:
##############################
Test: VerifySignedoff - PENDING
Desc: Verify Signed-off-by chain Output:
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis Output:
Clang not found
##############################
Test: TestRunner_l2cap-tester - FAIL
Desc: Run l2cap-tester with test-runner Output:
Total: 96, Passed: 95 (99.0%), Failed: 1, Not Run: 0
Failed Test Cases
L2CAP BR/EDR Server - Set PHY 3M Failed 0.250 seconds
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.240 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.682 seconds Mesh - Send cancel - 2 Timed out 1.988 seconds
https://github.com/bluez/bluetooth-next/pull/374
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 9 lines · On Mon, 29 Jun 2026 22:34:20 +0200 you wrote:
Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode
0x2005errors.The device reports the following in
/sys/kernel/debug/usb/devices:[...]
Here is the summary with links:
- [v2] Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table
https://git.kernel.org/bluetooth/bluetooth-next/c/547fc6a4a51a
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html