selftests/net/openvswitch: add output truncation test
Subsystems (4)
PATCH v2 1/1 selftests/net/openvswitch: add output truncation test
Add test_trunc exercising the OVS_ACTION_ATTR_TRUNC action. The test verifies truncation in three steps: first confirm normal forwarding works, then apply trunc(14) which truncates packets to the Ethernet header and verify ping fails, then restore normal forwarding and verify connectivity recovers.
The trunc action sets OVS_CB(skb)->cutlen, causing pskb_trim at output time. With trunc(14) the IP payload is stripped, so the receiver drops the frame and ICMP echo reply is never generated.
--- .../selftests/net/openvswitch/openvswitch.sh | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+)
tools/testing/selftests/net/openvswitch/openvswitch.sh +66 -0
@@ -32,6 +32,7 @@ tests=" dec_ttl ttl: dec_ttl decrements IP TTL flow_set flow-set: Flow modify action_set set: SET action rewrites fields + trunc trunc: output truncation psample psample: Sampling packets with psample" info() {
@@ -443,6 +444,71 @@ test_action_set() { return 0 } +test_trunc() { + sbx_add "test_trunc" || return $? + ovs_add_dp "test_trunc" trunctest || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_trunc" "trunctest" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 10.0.0.1/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 10.0.0.2/24 dev s1 + ip netns exec server ip link set s1 up + + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify connectivity without truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 || return 1 + + ovs_del_flows "test_trunc" trunctest + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + + info "add truncated forwarding flow" + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' \ + 'trunc(14),2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify ping fails with truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 >/dev/null 2>&1 \ + && { info "FAIL: ping should fail with trunc(14)" + return 1; } + + ovs_del_flows "test_trunc" trunctest + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify connectivity restored without truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 || return 1 + + return 0 +} + # psample test # - use psample to observe packets test_psample() {
base-commit: cef9d6804030793cf8b8796fd6936197d065dd3e
Signature · 1 line
2.54.0
Aaron Conole
maintainerQuoted 6 lines · Minxi Hou
Add
test_truncexercising theOVS_ACTION_ATTR_TRUNCaction. The test verifies truncation in three steps: first confirm normal forwarding works, then apply trunc(14) which truncates packets to the Ethernet header and verify ping fails, then restore normal forwarding and verify connectivity recovers.
Quoted 6 lines
The trunc action sets OVS_CB(skb)->cutlen, causing
pskb_trimat output time. With trunc(14) the IP payload is stripped, so the receiver drops the frame and ICMP echo reply is never generated.Signed-off-by Minxi Hou <[email protected]>---
NOTE: The subject should have had net-next I think
Quoted 16 lines
.../selftests/net/openvswitch/openvswitch.sh | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +1
-0@@ -32,6 +32,7 @@ tests=" dec_ttl ttl: dec_ttl decrements IP TTL flow_set flow-set: Flow modify action_set set: SET action rewrites fields + trunc trunc: output truncation psample psample: Sampling packets with psample" info() {
tools/testing/selftests/net/openvswitch/openvswitch.sh test_action_set() { · line 446
Quoted 3 lines
tools/testing/selftests/net/openvswitch/openvswitch.sh +0
-0@@ -443,6 +444,71 @@ test_action_set() { return 0 }
Most of the tests have a comment in front of them that does some description. I haven't been good about enforcing it, but at least I'd like to see it here to describe what trunc limits are being tested (in this case, just limiting to 14).
Perhaps we can also add testing for trunc(1) since that should reject (or both trunc(1) and trunc(13))
Quoted 70 lines
tools/testing/selftests/net/openvswitch/openvswitch.sh +65
-0+test_trunc() { + sbx_add "test_trunc" || return $? + ovs_add_dp "test_trunc" trunctest || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_trunc" "trunctest" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 10.0.0.1/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 10.0.0.2/24 dev s1 + ip netns exec server ip link set s1 up + + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify connectivity without truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 || return 1 + + ovs_del_flows "test_trunc" trunctest + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + + info "add truncated forwarding flow" + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' \ + 'trunc(14),2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify ping fails with truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 >/dev/null 2>&1 \ + && { info "FAIL: ping should fail with trunc(14)" + return 1; } + + ovs_del_flows "test_trunc" trunctest + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(1),eth(),eth_type(0x0800),ipv4()' '2' || return 1 + ovs_add_flow "test_trunc" trunctest \ + 'in_port(2),eth(),eth_type(0x0800),ipv4()' '1' || return 1 + + info "verify connectivity restored without truncation" + ovs_sbx "test_trunc" ip netns exec client ping -c 1 -W 2 \ + 10.0.0.2 || return 1 + + return 0 +} + # psample test # - use psample to observe packets test_psample() {base-commit:
cef9d6804030793cf8b8796fd6936197d065dd3e