Skip to contentSkip to conversation

iio: light: opt4001: Fixes from code review

PATCH In review Nikhil Gautam 3 participants 7 messages Jul 14 – Jul 20 IIO

lore
Share & tools
lore
#0 lore raw

v3 cover iio: light: opt4001: Fixes from code review

Hi,

This series fixes a number of issues found while reviewing the opt4001 driver. All of them date back to the initial submission of the driver in commit 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor").

Patch 1 fixes the power down path, which read the device ID register instead of the control register in a read-modify-write, corrupting the CTRL configuration on the way to power down.

Patch 2 fixes an incompatible pointer type passed as the remainder argument to div_u64_rem(). No functional impact.

Patch 3 makes opt4001_write_raw() reject integration time writes with a non-zero integer (seconds) part, which were previously accepted silently based on the microseconds part alone.

Patch 4 fixes reversed GENMASK() arguments in the (currently unused) fault count mask definition and adds the _MASK suffix for consistency.

Changes in v3:
- Patch 4: replaced tabs by spaces as suggested by Andy

Changes in v2:
- Add Fixes: tags to all patches
- Patch 1: use regmap_clear_bits() directly in the opt4001_chip_off_action and drop opt4001_power_down() (Jonathan)
- Patch 2: document that there is no functional impact (Jonathan)
- Patch 3: add blank line after the early return (Jonathan)
- Patch 4: fix whitespace alignment of the new define

Regards,
Nikhil

Nikhil Gautam (4):
iio: light: opt4001: Fix power down clearing bits of the wrong
register
iio: light: opt4001: Fix incompatible pointer type passed to

    div_u64_rem()

iio: light: opt4001: Reject integration times with a non-zero seconds
part
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count
mask

 drivers/iio/light/opt4001.c | 37 +++++++++++--------------------------
 1 file changed, 11 insertions(+), 26 deletions(-)
Signature · 1 line
2.39.5
#1 lore raw

PATCH v3 1/4 iio: light: opt4001: Fix power down clearing bits of the wrong register

opt4001_power_down() intends to clear the operating mode bits in the CTRL register but reads OPT4001_DEVICE_ID instead of OPT4001_CTRL, so the value written back to CTRL contains device ID bits rather than the current configuration.

Fix and simplify this by using regmap_clear_bits() on the CTRL register directly in the devm action, and drop opt4001_power_down() which has no other users.

Fixes 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor")
---
 drivers/iio/light/opt4001.c | 27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)
drivers/iio/light/opt4001.c +4 -23
index ba4eb82d9bc2..66563000d081 100644
@@ -222,33 +222,14 @@ static int opt4001_set_conf(struct opt4001_chip *chip)
 	return ret;
 }
 
-static int opt4001_power_down(struct opt4001_chip *chip)
-{
-	struct device *dev = &chip->client->dev;
-	int ret;
-	unsigned int reg;
-
-	ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &reg);
-	if (ret) {
-		dev_err(dev, "Failed to read configuration\n");
-		return ret;
-	}
-
-	/* MODE_OFF is 0x0 so just set bits to 0 */
-	reg &= ~OPT4001_CTRL_OPER_MODE_MASK;
-
-	ret = regmap_write(chip->regmap, OPT4001_CTRL, reg);
-	if (ret)
-		dev_err(dev, "Failed to set configuration to power down\n");
-
-	return ret;
-}
-
 static void opt4001_chip_off_action(void *data)
 {
 	struct opt4001_chip *chip = data;
+	int ret;
 
-	opt4001_power_down(chip);
+	ret = regmap_clear_bits(chip->regmap, OPT4001_CTRL, OPT4001_CTRL_OPER_MODE_MASK);
+	if (ret)
+		dev_err(&chip->client->dev, "Failed to power down\n");
 }
 
 static const struct iio_chan_spec opt4001_channels[] = {
Signature · 1 line
2.39.5
#2 lore raw

PATCH v3 2/4 iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()

In reply to Nikhil Gautam

div_u64_rem() takes a u32 * for the remainder but is passed val2, which is an int *. There is no functional impact as int and u32 have the same size and representation on all supported architectures and the remainder is always smaller than the divisor, so it fits in the positive range of int. Fix the type mismatch by using a local u32 for the remainder and assigning the result to *val2.

Fixes 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor")
---
 drivers/iio/light/opt4001.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/iio/light/opt4001.c +3 -2
index 66563000d081..a0f174888384 100644
@@ -173,6 +173,7 @@ static int opt4001_read_lux_value(struct iio_dev *indio_dev,
 	u8 crc;
 	u8 calc_crc;
 	u64 lux_raw;
+	u32 rem;
 	int ret;
 
 	ret = regmap_read(chip->regmap, OPT4001_LIGHT1_MSB, &light1);
@@ -199,8 +200,8 @@ static int opt4001_read_lux_value(struct iio_dev *indio_dev,
 
 	lux_raw = lux_raw << exp;
 	lux_raw = lux_raw * chip->chip_info->mul;
-	*val = div_u64_rem(lux_raw, chip->chip_info->div, val2);
-	*val2 = *val2 * 100;
+	*val = div_u64_rem(lux_raw, chip->chip_info->div, &rem);
+	*val2 = rem * 100;
 
 	return IIO_VAL_INT_PLUS_NANO;
 }
Signature · 1 line
2.39.5
#3 lore raw

PATCH v3 3/4 iio: light: opt4001: Reject integration times with a non-zero seconds part

In reply to Nikhil Gautam

opt4001_write_raw() only looks at val2 when setting the integration time, so a write such as 1.000600 is silently accepted as 600 us. Return -EINVAL if val is non-zero.

Fixes 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor")
---
 drivers/iio/light/opt4001.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/iio/light/opt4001.c +3 -0
index a0f174888384..bb4be6384e4c 100644
@@ -269,6 +269,9 @@ static int opt4001_write_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_INT_TIME:
+		if (val)
+			return -EINVAL;
+
 		int_time = opt4001_als_time_to_index(val2);
 		if (int_time < 0)
 			return int_time;
Signature · 1 line
2.39.5
#4 lore raw

PATCH v3 4/4 iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask

In reply to Nikhil Gautam

GENMASK(h, l) requires h >= l, but OPT4001_CTRL_FAULT_COUNT is defined as GENMASK(0, 1). The define is currently unused so there is no functional impact, but fix it before anyone builds on it, and add the _MASK suffix for consistency with the neighbouring definitions.

Fixes 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor")
---
 drivers/iio/light/opt4001.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/light/opt4001.c +1 -1
index bb4be6384e4c..731eb8d7326a 100644
@@ -39,7 +39,7 @@
 #define OPT4001_CTRL_OPER_MODE_MASK      GENMASK(5, 4)
 #define OPT4001_CTRL_LATCH_MASK          GENMASK(3, 3)
 #define OPT4001_CTRL_INT_POL_MASK        GENMASK(2, 2)
-#define OPT4001_CTRL_FAULT_COUNT         GENMASK(0, 1)
+#define OPT4001_CTRL_FAULT_COUNT_MASK    GENMASK(1, 0)
 
 /* OPT4001 constants */
 #define OPT4001_DEVICE_ID_VAL            0x121
Signature · 1 line
2.39.5
Reviewed-by on the v3 series
#5 lore raw
In reply to Nikhil Gautam
Quoted 14 lines · Nikhil Gautam

Hi,

This series fixes a number of issues found while reviewing the opt4001 driver. All of them date back to the initial submission of the driver in commit 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor").

Patch 1 fixes the power down path, which read the device ID register instead of the control register in a read-modify-write, corrupting the CTRL configuration on the way to power down.

Patch 2 fixes an incompatible pointer type passed as the remainder argument to div_u64_rem(). No functional impact.

Quoted 6 lines

Patch 3 makes opt4001_write_raw() reject integration time writes with a non-zero integer (seconds) part, which were previously accepted silently based on the microseconds part alone.

Patch 4 fixes reversed GENMASK() arguments in the (currently unused) fault count mask definition and adds the _MASK suffix for consistency.

LGTM now, FWIW,

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#6 lore raw
Quoted 19 lines · On Tue, 14 Jul 2026 15:44:33 +0300 Andy Shevchenko…
Quoted 18 lines · Nikhil Gautam

Hi,

This series fixes a number of issues found while reviewing the opt4001 driver. All of them date back to the initial submission of the driver in commit 9a9608418292 ("iio: light: Add support for TI OPT4001 light sensor").

Patch 1 fixes the power down path, which read the device ID register instead of the control register in a read-modify-write, corrupting the CTRL configuration on the way to power down.

Patch 2 fixes an incompatible pointer type passed as the remainder argument to div_u64_rem(). No functional impact.

Patch 3 makes opt4001_write_raw() reject integration time writes with a non-zero integer (seconds) part, which were previously accepted silently based on the microseconds part alone.

Quoted 6 lines
Quoted 2 lines

Patch 4 fixes reversed GENMASK() arguments in the (currently unused) fault count mask definition and adds the _MASK suffix for consistency.

LGTM now, FWIW,

Nice. Applied to the fixes-togreg branch of iio.git. I marked them all for stable

Thanks

Jonathan