Skip to contentSkip to conversation

spi: orion: use devm_clk_get_optional_enabled for axi clock

PATCH Superseded Rosen Penev 2 participants 2 messages Jul 15 – Jul 16 SPI

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: orion: use devm_clk_get_optional_enabled for axi clock

Replace the open-coded optional axi clock get/prepare/enable and the manual cleanup in probe/remove/runtime_resume with the managed helper devm_clk_get_optional_enabled(). This removes the now-unused out_rel_axi_clk error path and simplifies the clock lifecycle.

Assisted-by opencode:hy3-free
---
 drivers/spi/spi-orion.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)
drivers/spi/spi-orion.c +7 -17
index 265708a94984..b1049fd66313 100644
@@ -691,12 +691,9 @@ static int orion_spi_probe(struct platform_device *pdev)
 		return PTR_ERR(spi->clk);
 
 	/* The following clock is only used by some SoCs */
-	spi->axi_clk = devm_clk_get(&pdev->dev, "axi");
-	if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (!IS_ERR(spi->axi_clk))
-		clk_prepare_enable(spi->axi_clk);
+	spi->axi_clk = devm_clk_get_optional_enabled(&pdev->dev, "axi");
+	if (IS_ERR(spi->axi_clk))
+		return PTR_ERR(spi->axi_clk);
 
 	tclk_hz = clk_get_rate(spi->clk);
 
@@ -719,10 +716,8 @@ static int orion_spi_probe(struct platform_device *pdev)
 	host->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
 
 	spi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
-	if (IS_ERR(spi->base)) {
-		status = PTR_ERR(spi->base);
-		goto out_rel_axi_clk;
-	}
+	if (IS_ERR(spi->base))
+		return PTR_ERR(spi->base);
 
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
 		struct orion_direct_acc *dir_acc;
@@ -757,9 +752,8 @@ static int orion_spi_probe(struct platform_device *pdev)
 		dir_acc = &spi->child[cs].direct_access;
 		dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
 		if (!dir_acc->vaddr) {
-			status = -ENOMEM;
 			of_node_put(np);
-			goto out_rel_axi_clk;
+			return -ENOMEM;
 		}
 		dir_acc->size = PAGE_SIZE;
 
@@ -789,8 +783,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-out_rel_axi_clk:
-	clk_disable_unprepare(spi->axi_clk);
 
 	return status;
 }
@@ -804,7 +796,6 @@ static void orion_spi_remove(struct platform_device *pdev)
 	spi_unregister_controller(host);
 
 	pm_runtime_get_sync(&pdev->dev);
-	clk_disable_unprepare(spi->axi_clk);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
@@ -830,8 +821,7 @@ static int orion_spi_runtime_resume(struct device *dev)
 	struct spi_controller *host = dev_get_drvdata(dev);
 	struct orion_spi *spi = spi_controller_get_devdata(host);
 
-	if (!IS_ERR(spi->axi_clk))
-		clk_prepare_enable(spi->axi_clk);
+	clk_prepare_enable(spi->axi_clk);
 	return clk_prepare_enable(spi->clk);
 }
 #endif
Signature · 1 line
2.55.0
maintainer
#1 lore raw

drivers/spi/spi-orion.c static void orion_spi_remove(struct platform_device *pdev) · line 801

Quoted 13 lines · Rosen Penev

Replace the open-coded optional axi clock get/prepare/enable and the manual cleanup in probe/remove/runtime_resume with the managed helper devm_clk_get_optional_enabled(). This removes the now-unused out_rel_axi_clk error path and simplifies the clock lifecycle.

drivers/spi/spi-orion.c +0 -1
@@ -804,7 +796,6 @@ static void orion_spi_remove(struct platform_device *pdev)
 	spi_unregister_controller(host);
 
 	pm_runtime_get_sync(&pdev->dev);
-	clk_disable_unprepare(spi->axi_clk);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);

This breaks the build since it removes the only use of 'spi' in the function.