Skip to contentSkip to conversation

dt-bindings: clock: Convert TI Palmas Clock to DT schema

PATCH Applied Eduard Bostina 3 participants 3 messages Jul 19 – Sep 29

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: clock: Convert TI Palmas Clock to DT schema

Convert the Texas Instruments Palmas 32KHz clock bindings to DT schema.

During the conversion, the node name in the example was updated from 'palmas_clk32k@0' to 'clock-controller'. The old example contained a unit address without a 'reg' property, which causes dtc compilation warnings.

---
 .../clock/clk-palmas-clk32kg-clocks.txt       | 35 ------------
 .../bindings/clock/ti,palmas-clk32kg.yaml     | 56 +++++++++++++++++++
 2 files changed, 56 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti,palmas-clk32kg.yaml
Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt deleted +0 -35
deleted file mode 100644
index 4208886d834a..000000000000
@@ -1,35 +0,0 @@
-* Palmas 32KHz clocks *
-
-Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
-
-This binding uses the common clock binding ./clock-bindings.txt.
-
-Required properties:
-- compatible :	"ti,palmas-clk32kg" for clk32kg clock
-		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
-- #clock-cells : shall be set to 0.
-
-Optional property:
-- ti,external-sleep-control: The external enable input pins controlled the
-	enable/disable of clocks.  The external enable input pins ENABLE1,
-	ENABLE2 and NSLEEP. The valid values for the external pins are:
-		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
-		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
-		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
-	Option 0 or missing this property means the clock is enabled/disabled
-	via register access and these pins do not have any control.
-	The macros of external control pins for DTS is defined at
-	dt-bindings/mfd/palmas.h
-
-Example:
-	#include <dt-bindings/mfd/palmas.h>
-	...
-	palmas: tps65913@58 {
-		...
-		clk32kg: palmas_clk32k@0 {
-			compatible = "ti,palmas-clk32kg";
-			#clock-cells = <0>;
-			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
-		};
-		...
-	};
Documentation/devicetree/bindings/clock/ti,palmas-clk32kg.yaml new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Eduard Bostina

Convert the Texas Instruments Palmas 32KHz clock bindings to DT schema.

During the conversion, the node name in the example was updated from 'palmas_clk32k@0' to 'clock-controller'. The old example contained a unit address without a 'reg' property, which causes dtc compilation warnings.

Quoted 8 lines
---
 .../clock/clk-palmas-clk32kg-clocks.txt       | 35 ------------
 .../bindings/clock/ti,palmas-clk32kg.yaml     | 56 +++++++++++++++++++
 2 files changed, 56 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti,palmas-clk32kg.yaml
Applied
#2 lore raw
In reply to Eduard Bostina
Quoted 1 line · Eduard Bostina

dt-bindings: clock: Convert TI Palmas Clock to DT schema

Applied, thanks!

[1/1] dt-bindings: clock: Convert TI Palmas Clock to DT schema

      commit: e44caef8848790e3515c7c32bd3460e948613092

Best regards,

Signature · 1 line
Brian Masney <[email protected]>