hwmon: ltc4283: add missing MODULE_DEVICE_TABLE for OF match table
Subsystems (3)
PATCH 1/1 hwmon: ltc4283: add missing MODULE_DEVICE_TABLE for OF match table
From: surendra <[email protected]>
The driver registers ltc4283_of_match as the platform driver's .of_match_table so the kernel probes the device when a DT node with compatible "adi,ltc4283" is present, but the corresponding MODULE_DEVICE_TABLE(of, ...) call is absent.
Without it the module alias table (modules.alias) does not contain an "of:N*T*Cadi,ltc4283" entry, so udev / kmod cannot auto-load the module when the DT node appears, breaking modules-based deployments while built-in configurations happen to work by accident.
Add the missing MODULE_DEVICE_TABLE() to fix module auto-loading.
--- drivers/hwmon/ltc4283.c | 1 + 1 file changed, 1 insertion(+)
drivers/hwmon/ltc4283.c +1 -0
@@ -1772,6 +1772,7 @@ static const struct of_device_id ltc4283_of_match[] = { { .compatible = "adi,ltc4283" }, { } }; +MODULE_DEVICE_TABLE (of, ltc4283_of_match);static const struct i2c_device_id ltc4283_i2c_id[] = { {"ltc4283" },
Signature · 1 line
2.55.0
[email protected]
AI reviewSashiko has reviewed this patch and found no issues. It looks great!
Quoted 12 lines
From: surendra <[email protected]>
The driver registers
ltc4283_of_matchas the platform driver's .of_match_table so the kernel probes the device when a DT node with compatible "adi,ltc4283" is present, but the correspondingMODULE_DEVICE_TABLE(of, ...)call is absent.Without it the module alias table (modules.alias) does not contain an "of:N*T*Cadi,ltc4283" entry, so udev / kmod cannot auto-load the module when the DT node appears, breaking modules-based deployments while built-in configurations happen to work by accident.
Quoted 4 lines
Add the missing
MODULE_DEVICE_TABLE()to fix module auto-loading.Fixes dd63353a0b5e ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")Signed-off-by surendra <[email protected]>
Sashiko has reviewed this patch and found no issues. It looks great!
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Quoted 12 lines · On Tue, Jul 21, 2026 at 11:20:22AM +0530, [email protected] wrote:
From: surendra <[email protected]>
The driver registers
ltc4283_of_matchas the platform driver's .of_match_table so the kernel probes the device when a DT node with compatible "adi,ltc4283" is present, but the correspondingMODULE_DEVICE_TABLE(of, ...)call is absent.Without it the module alias table (modules.alias) does not contain an "of:N*T*Cadi,ltc4283" entry, so udev / kmod cannot auto-load the module when the DT node appears, breaking modules-based deployments while built-in configurations happen to work by accident.
Quoted 4 lines
Add the missing
MODULE_DEVICE_TABLE()to fix module auto-loading.Fixes dd63353a0b5e ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")Signed-off-by surendra <[email protected]>
Applied.
Thanks,
Guenter
Quoted 16 lines
--- drivers/hwmon/ltc4283.c | 1 + 1 file changed, 1 insertion(+)drivers/hwmon/ltc4283.c +1
-0@@ -1772,6 +1772,7 @@ static const struct of_device_id ltc4283_of_match[] = { { .compatible = "adi,ltc4283" }, { } }; +MODULE_DEVICE_TABLE (of, ltc4283_of_match);static const struct i2c_device_id ltc4283_i2c_id[] = { {"ltc4283" },