Fix wrong domain value verification with EP11 cards
Subsystems (2)
Harald Freudenberger
maintainerv2 cover Fix wrong domain value verification with EP11 cards
There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this.
v1: initial version
v2: Resend without any code changes, just Finn's reviewed by added.
Harald Freudenberger (1):
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
drivers/s390/crypto/zcrypt_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Signature · 1 line
2.43.0
Harald Freudenberger
maintainerPATCH v2 1/1 s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this.
--- drivers/s390/crypto/zcrypt_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/s390/crypto/zcrypt_api.c +1 -1
@@ -1077,7 +1077,7 @@ static long _zcrypt_send_ep11_cprb(u32 xflags, struct ap_perms *perms,print_hex_dump_debug ("ep11req: " ,DUMP_PREFIX_ADDRESS ,16 ,1 , ap_msg.msg, ap_msg.len, false); -if (perms != &ap_perms && domain <AUTOSEL_DOM ) { +if (perms != &ap_perms && domain <AP_DOMAINS ) {if (ap_msg.flags &AP_MSG_FLAG_ADMIN ) {if (!test_bit_inv (domain, perms->adm)) { rc = -ENODEV ;
Signature · 1 line
2.43.0
[email protected]
AI reviewRe: [PATCH v2 1/1] s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [Critical] The administrative permission (perms->adm) check can be completely bypassed by supplying a domain >= AP_DOMAINS (such as AUTOSEL_DOM), allowing unauthorized administrative commands to be executed on queues where the user only has usage access. --
--- Patch [1]: [PATCH v2 1/1] s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs --- commit bde27d2c3d10843f1570c9d533dc3ccd2e17bf0f
Author: Harald Freudenberger <[email protected]>
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent.
drivers/s390/crypto/zcrypt_api.c static long _zcrypt_send_ep11_cprb(u32 xflags, struct ap_perms *perms, · line 1080
Quoted 10 lines
drivers/s390/crypto/zcrypt_api.c +1
-1@@ -1077,7 +1077,7 @@ static long _zcrypt_send_ep11_cprb(u32 xflags, struct ap_perms *perms,print_hex_dump_debug ("ep11req: " ,DUMP_PREFIX_ADDRESS ,16 ,1 , ap_msg.msg, ap_msg.len, false); -if (perms != &ap_perms && domain <AUTOSEL_DOM ) { +if (perms != &ap_perms && domain <AP_DOMAINS ) {
[Severity: Critical]
This is a pre-existing issue, but does this logic allow an unauthorized administrative command to bypass the perms->adm check entirely if a user supplies a domain value greater than or equal to AP_DOMAINS, such as AUTOSEL_DOM (0xFFFF)?
If domain >= AP_DOMAINS, this condition evaluates to false, completely skipping the administrative permissions check. The driver then proceeds to autoselect a queue using zcrypt_check_queue(), which only verifies the usage mask (perms->aqm), ignoring whether the queue is being targeted by an administrative command.
For example, if a user issues an ioctl with an admin command and sets the domain field to AUTOSEL_DOM, the driver bypasses the perms->adm verification. Then, as seen in paths like zcrypt_msgtype6_send_cprb() for CCA, the AUTOSEL_DOM value is overwritten with the selected queue's real domain ID before dispatch, converting the bypassed command into an executable hardware command. The same bypass exists here in the EP11 request path.
Can a user with only usage permission on a custom zcrypt device node use this to execute arbitrary hardware administrative commands?
Quoted 3 lines
drivers/s390/crypto/zcrypt_api.c +0
-0if (ap_msg.flags &AP_MSG_FLAG_ADMIN ) {if (!test_bit_inv (domain, perms->adm)) { rc = -ENODEV ;
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1