hwmon: (nct6775-core) Prevent access to unsupported weight registers
Guenter Roeck
maintainerPATCH 1/1 hwmon: (nct6775-core) Prevent access to unsupported weight registers
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers.
--- drivers/hwmon/nct6775-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/hwmon/nct6775-core.c +6 -6
@@ -791,12 +791,12 @@ static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 };static const u16 NCT6106_REG_TARGET [] = {0x111 ,0x121 ,0x131 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_SEL [] = {0x168 ,0x178 ,0x188 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_STEP [] = {0x169 ,0x179 ,0x189 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL [] = {0x16a ,0x17a ,0x18a }; -static const u16 NCT6106_REG_WEIGHT_DUTY_STEP [] = {0x16b ,0x17b ,0x18b }; -static const u16 NCT6106_REG_WEIGHT_TEMP_BASE [] = {0x16c ,0x17c ,0x18c }; -static const u16 NCT6106_REG_WEIGHT_DUTY_BASE [] = {0x16d ,0x17d ,0x18d }; +static const u16 NCT6106_REG_WEIGHT_TEMP_SEL [] = {0x168 ,0x178 ,0x188 ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP [] = {0x169 ,0x179 ,0x189 ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL [] = {0x16a ,0x17a ,0x18a ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_STEP [] = {0x16b ,0x17b ,0x18b ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_BASE [] = {0x16c ,0x17c ,0x18c ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_BASE [] = {0x16d ,0x17d ,0x18d ,0 ,0 };static const u16 NCT6106_REG_AUTO_TEMP [] = {0x160 ,0x170 ,0x180 };static const u16 NCT6106_REG_AUTO_PWM [] = {0x164 ,0x174 ,0x184 };
Signature · 1 line
2.45.2
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] The patch addresses out-of-bounds reads for PWM weight control registers but misses an identical vulnerability for NCT6116_REG_TEMP_SOURCE. This array has only 3 elements but is accessed up to index 5 during the nct6775_probe initialization, leading to an out-of-bounds read and arbitrary hardware register corruption. --
--- Patch [1]: [PATCH] hwmon: (nct6775-core) Prevent access to unsupported weight registers --- commit 38ce01c21386add5f97d86c3020857301fde2125
Author: Guenter Roeck <[email protected]>
hwmon: (nct6775-core) Prevent access to unsupported weight registers
During initialization of the nct6116 chip, the driver assigns several 3-element NCT6106 register arrays to data pointers, but subsequently iterates up to 5 times based on data->pwm_num. This causes an out-of-bounds read, fetching garbage values that are then used as hardware register addresses. This patch fixes the issue by extending the affected arrays with zeroed fields.
Quoted 10 lines
drivers/hwmon/nct6775-core.c +0
-2@@ -791,12 +791,12 @@ static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 };static const u16 NCT6106_REG_TARGET [] = {0x111 ,0x121 ,0x131 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_SEL [] = {0x168 ,0x178 ,0x188 }; -static const u16 NCT6106_REG_WEIGHT_TEMP_STEP [] = {0x169 ,0x179 ,0x189 };
drivers/hwmon/nct6775-core.c static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 }; · line 799
Quoted 10 lines
drivers/hwmon/nct6775-core.c +6
-4-static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL [] = {0x16a ,0x17a ,0x18a }; -static const u16 NCT6106_REG_WEIGHT_DUTY_STEP [] = {0x16b ,0x17b ,0x18b }; -static const u16 NCT6106_REG_WEIGHT_TEMP_BASE [] = {0x16c ,0x17c ,0x18c }; -static const u16 NCT6106_REG_WEIGHT_DUTY_BASE [] = {0x16d ,0x17d ,0x18d }; +static const u16 NCT6106_REG_WEIGHT_TEMP_SEL [] = {0x168 ,0x178 ,0x188 ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP [] = {0x169 ,0x179 ,0x189 ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL [] = {0x16a ,0x17a ,0x18a ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_STEP [] = {0x16b ,0x17b ,0x18b ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_TEMP_BASE [] = {0x16c ,0x17c ,0x18c ,0 ,0 }; +static const u16 NCT6106_REG_WEIGHT_DUTY_BASE [] = {0x16d ,0x17d ,0x18d ,0 ,0 };
[Severity: High]
This isn't a bug introduced by this patch, but does the same problem exist for NCT6116_REG_TEMP_SOURCE?
It appears NCT6116_REG_TEMP_SOURCE is defined with only 3 elements:
drivers/hwmon/nct6775-core.c:
static const u16 NCT6116_REG_TEMP_SOURCE[] = {
0xb0, 0xb1, 0xb2 };During initialization, num_reg_temp is set to 6. Later in nct6775_probe(), the code iterates unconditionally up to num_reg_temp:
drivers/hwmon/nct6775-core.c:nct6775_probe() {
...
err = nct6775_read_value(data, data->REG_TEMP_SOURCE[i], &src);
...
}Could this cause a similar out-of-bounds read and subsequent corruption when add_temp_sensors() writes the temperature source mapping to those unintended hardware register addresses?
Quoted 2 lines
drivers/hwmon/nct6775-core.c +0
-0static const u16 NCT6106_REG_AUTO_TEMP [] = {0x160 ,0x170 ,0x180 };
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1