Input: mtk-pmic-keys: probe cleanups
Subsystems (3)
v2 cover Input: mtk-pmic-keys: probe cleanups
Replace an open-coded of_match_device() lookup with of_device_get_match_data(), then rework the key-counting logic to iterate child nodes in a single pass instead of pre-counting.
v2: split patches up and add irq checks.
Rosen Penev (2):
Input: mtk-pmic-keys: use of_device_get_match_data()
Input: mtk-pmic-keys: Count available keys during probe instead of
pre-counting
drivers/input/keyboard/mtk-pmic-keys.c | 76 ++++++++++++-------------- 1 file changed, 35 insertions(+), 41 deletions(-)
Signature · 1 line
2.55.0
PATCH v2 1/2 Input: mtk-pmic-keys: use of_device_get_match_data()
Instead of open coding it, use the proper function.
All entries have a corresponding data entry so a NULL check is not applied here.
Remove of_device.h as a result.
--- drivers/input/keyboard/mtk-pmic-keys.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/input/keyboard/mtk-pmic-keys.c +1 -4
@@ -16,7 +16,6 @@#include <linux/mfd/mt6397/core.h> #include <linux/mfd/mt6397/registers.h> #include <linux/module.h> -#include <linux/of_device.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h>
@@ -333,8 +332,6 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs;struct input_dev *input_dev; -const struct of_device_id *of_id = -of_match_device (of_mtk_pmic_keys_match_tbl, &pdev->dev); keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );if (!keys)
@@ -342,7 +339,7 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) keys->dev = &pdev->dev; keys->regmap = pmic_chip->regmap; - mtk_pmic_regs = of_id->data; + mtk_pmic_regs =of_device_get_match_data (&pdev->dev); keys->input_dev = input_dev =devm_input_allocate_device (keys->dev);if (!input_dev) {
Signature · 1 line
2.55.0
PATCH v2 2/2 Input: mtk-pmic-keys: Count available keys during probe instead of pre-counting
In reply to Rosen PenevReplace the separate of_get_available_child_count() pre-count and validation step with a single pass through for_each_child_of_node_scoped(). Skip unavailable child nodes and bail if more than MTK_PMIC_MAX_KEY_COUNT available keys are found. Set nkeys after the loop so suspend/resume iterate only over initialized entries. Use a local key variable in the loop for clarity.
Add an irq > 0 guard to the suspend/resume wakeup paths so that uninitialized key entries are safely skipped.
--- drivers/input/keyboard/mtk-pmic-keys.c | 71 ++++++++++++-------------- 1 file changed, 34 insertions(+), 37 deletions(-)
drivers/input/keyboard/mtk-pmic-keys.c +34 -37
@@ -267,7 +267,7 @@ static int mtk_pmic_keys_suspend(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {enable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )enable_irq_wake (keys->keys[index].irq_r);
@@ -283,7 +283,7 @@ static int mtk_pmic_keys_resume(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {disable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )disable_irq_wake (keys->keys[index].irq_r);
@@ -324,13 +324,13 @@ MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);static int mtk_pmic_keys_probe (struct platform_device *pdev) {int error, index =0 ; -unsigned int keycount;struct mt6397_chip *pmic_chip =dev_get_drvdata (pdev->dev.parent);struct device_node *node = pdev->dev.of_node;static const char *const irqnames[] = {"powerkey" ,"homekey" };static const char *const irqnames_r[] = {"powerkey_r" ,"homekey_r" };struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs; +struct mtk_pmic_keys_info *key;struct input_dev *input_dev; keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );
@@ -353,45 +353,42 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) input_dev->id.product =0x0001 ; input_dev->id.version =0x0001 ; - keycount =of_get_available_child_count (node); -if (keycount >MTK_PMIC_MAX_KEY_COUNT || - keycount >ARRAY_SIZE (irqnames)) { -dev_err (keys->dev,"too many keys defined (%d)\n" , keycount); -return -EINVAL ; - } -for_each_child_of_node_scoped (node, child) { - keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; - - keys->keys[index].irq = -platform_get_irq_byname (pdev, irqnames[index]); -if (keys->keys[index].irq <0 ) -return keys->keys[index].irq; - -if (mtk_pmic_regs->key_release_irq) { - keys->keys[index].irq_r =platform_get_irq_byname (pdev, - irqnames_r[index]); - -if (keys->keys[index].irq_r <0 ) -return keys->keys[index].irq_r; +if (index >=MTK_PMIC_MAX_KEY_COUNT ) { +dev_err (&pdev->dev,"too many keys defined\n" ); +return -EINVAL ; } - error =of_property_read_u32 (child, -"linux,keycodes" , &keys->keys[index].keycode); -if (error) { -dev_err (keys->dev, -"failed to read key:%d linux,keycode property: %d\n" , - index, error); -return error; +if (of_device_is_available (child)) { + key = &keys->keys[index]; + key->regs = &mtk_pmic_regs->keys_regs[index]; + + key->irq =platform_get_irq_byname (pdev, irqnames[index]); +if (key->irq <0 ) +return key->irq; + +if (mtk_pmic_regs->key_release_irq) { + key->irq_r =platform_get_irq_byname (pdev, irqnames_r[index]); +if (key->irq_r <0 ) +return key->irq_r; + } + + error =of_property_read_u32 (child,"linux,keycodes" , &key->keycode); +if (error) { +dev_err (keys->dev, +"failed to read key:%d linux,keycode property: %d\n" , + index, error); +return error; + } + +if (of_property_present (child,"wakeup-source" )) + key->wakeup = true; + + error =mtk_pmic_key_setup (keys, key); +if (error) +return error; } -if (of_property_read_bool (child,"wakeup-source" )) - keys->keys[index].wakeup = true; - - error =mtk_pmic_key_setup (keys, &keys->keys[index]); -if (error) -return error; - index++; }
Signature · 1 line
2.55.0
[email protected]
AI reviewRe: [PATCHv2 1/2] Input: mtk-pmic-keys: use of_device_get_match_data()
In reply to Rosen PenevThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Mismatch between counting available child nodes and iterating over all child nodes leads to an out-of-bounds array access. --
--- Patch [1]: [PATCHv2 1/2] Input: mtk-pmic-keys: use of_device_get_match_data() --- commit 8b3f8694df03175d2fcd1e69a487343b4d70d629
Author: Rosen Penev <[email protected]>
Input: mtk-pmic-keys: use of_device_get_match_data()
This commit replaces open-coded match data retrieval with of_device_get_match_data() and removes the of_device.h include.
Quoted 4 lines
drivers/input/keyboard/mtk-pmic-keys.c +0
-0
[ ... ]
Quoted 10 lines
drivers/input/keyboard/mtk-pmic-keys.c +0
-2@@ -333,8 +332,6 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs;struct input_dev *input_dev; -const struct of_device_id *of_id = -of_match_device (of_mtk_pmic_keys_match_tbl, &pdev->dev); keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );if (!keys)
drivers/input/keyboard/mtk-pmic-keys.c static int mtk_pmic_keys_probe(struct platform_device *pdev) · line 344
Quoted 7 lines
drivers/input/keyboard/mtk-pmic-keys.c +1
-1@@ -342,7 +339,7 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) keys->dev = &pdev->dev; keys->regmap = pmic_chip->regmap; - mtk_pmic_regs = of_id->data; + mtk_pmic_regs =of_device_get_match_data (&pdev->dev); keys->input_dev = input_dev =devm_input_allocate_device (keys->dev);
[Severity: High]
This is a pre-existing issue, but while reviewing mtk_pmic_keys_probe(), I noticed a potential out-of-bounds array access further down in the function.
The function correctly limits the expected number of keys by checking the count of available child nodes:
drivers/input/keyboard/mtk-pmic-keys.c:mtk_pmic_keys_probe() {
...
keycount = of_get_available_child_count(node);
if (keycount > MTK_PMIC_MAX_KEY_COUNT ||
keycount > ARRAY_SIZE(irqnames)) {
dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
return -EINVAL;
}
...
}However, it then iterates over all child nodes, not just the available ones:
drivers/input/keyboard/mtk-pmic-keys.c:mtk_pmic_keys_probe() {
...
for_each_child_of_node_scoped(node, child) {
keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index];
keys->keys[index].irq =
platform_get_irq_byname(pdev, irqnames[index]);
...
}If a device tree provides more child nodes than MTK_PMIC_MAX_KEY_COUNT but only a subset are marked as available (for example, with status = "okay"), the bounds check will pass. Because the loop iterates over all child nodes regardless of their availability status, could index exceed the array limits?
Would it be safer to use for_each_available_child_of_node_scoped() here to ensure the loop matches the earlier available child count check and prevents an out-of-bounds read on irqnames[] and write to keys->keys[]?
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Re: [PATCHv2 2/2] Input: mtk-pmic-keys: Count available keys during probe instead of pre-counting
In reply to Rosen PenevQuoted 5 lines · Rosen Penev
Replace the separate
of_get_available_child_count()pre-count and validation step with a single pass throughfor_each_child_of_node_scoped(). Skip unavailable child nodes and bail if more thanMTK_PMIC_MAX_KEY_COUNTavailable keys are found.
This actually fixes a small bug. The pre-count only gets the number of available keys, but the subsequent for_each_child block doesn't skip over the unavailable ones, so if an unavailable node is in the middle of the tree, there could end up being a mismatch.
Quoted 6 lines
Set nkeys after the loop so suspend/resume iterate only over initialized entries. Use a local key variable in the loop for clarity.
Add an irq > 0 guard to the suspend/resume wakeup paths so that uninitialized key entries are safely skipped.
You are trying to do too much in one patch. These other fixes should be in separate patches.
And why not just modify the driver to keep "nkeys", so that it knows how many entries are valid? No use in iterating over empty entries.
Quoted 71 lines
Assisted-by OpenCode:BigPickleSigned-off-by Rosen Penev <[email protected]>--- drivers/input/keyboard/mtk-pmic-keys.c | 71 ++++++++++++-------------- 1 file changed, 34 insertions(+), 37 deletions(-)drivers/input/keyboard/mtk-pmic-keys.c +6
-23@@ -267,7 +267,7 @@ static int mtk_pmic_keys_suspend(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {enable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )enable_irq_wake (keys->keys[index].irq_r);@@ -283,7 +283,7 @@ static int mtk_pmic_keys_resume(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {disable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )disable_irq_wake (keys->keys[index].irq_r);@@ -324,13 +324,13 @@ MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);static int mtk_pmic_keys_probe (struct platform_device *pdev) {int error, index =0 ; -unsigned int keycount;struct mt6397_chip *pmic_chip =dev_get_drvdata (pdev->dev.parent);struct device_node *node = pdev->dev.of_node;static const char *const irqnames[] = {"powerkey" ,"homekey" };static const char *const irqnames_r[] = {"powerkey_r" ,"homekey_r" };struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs; +struct mtk_pmic_keys_info *key;struct input_dev *input_dev; keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );@@ -353,45 +353,42 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) input_dev->id.product =0x0001 ; input_dev->id.version =0x0001 ; - keycount =of_get_available_child_count (node); -if (keycount >MTK_PMIC_MAX_KEY_COUNT || - keycount >ARRAY_SIZE (irqnames)) { -dev_err (keys->dev,"too many keys defined (%d)\n" , keycount); -return -EINVAL ; - } -for_each_child_of_node_scoped (node, child) { - keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; - - keys->keys[index].irq = -platform_get_irq_byname (pdev, irqnames[index]); -if (keys->keys[index].irq <0 ) -return keys->keys[index].irq; - -if (mtk_pmic_regs->key_release_irq) { - keys->keys[index].irq_r =platform_get_irq_byname (pdev, - irqnames_r[index]); - -if (keys->keys[index].irq_r <0 ) -return keys->keys[index].irq_r; +if (index >=MTK_PMIC_MAX_KEY_COUNT ) { +dev_err (&pdev->dev,"too many keys defined\n" ); +return -EINVAL ;
drivers/input/keyboard/mtk-pmic-keys.c static int mtk_pmic_keys_probe(struct platform_device *pdev) · line 362
Quoted 10 lines
drivers/input/keyboard/mtk-pmic-keys.c +1
-7} - error =of_property_read_u32 (child, -"linux,keycodes" , &keys->keys[index].keycode); -if (error) { -dev_err (keys->dev, -"failed to read key:%d linux,keycode property: %d\n" , - index, error); -return error; +if (of_device_is_available (child)) {
Instead of re-indenting the whole block and making the diff huge and unreadable, please make this skip over the remaining code when the condition fails, i.e.:
if (!of_device_is_available(child))
continue;Or better yet, just use for_each_available_child_of_node_scoped() { ... } instead.
I normally suggest people read the API docs (either on docs.kernel.org or the kernel-doc sections in the code) to find better suited constructs to use.
Thanks
ChenYu
Quoted 43 lines
drivers/input/keyboard/mtk-pmic-keys.c +27
-8+ key = &keys->keys[index]; + key->regs = &mtk_pmic_regs->keys_regs[index]; + + key->irq =platform_get_irq_byname (pdev, irqnames[index]); +if (key->irq <0 ) +return key->irq; + +if (mtk_pmic_regs->key_release_irq) { + key->irq_r =platform_get_irq_byname (pdev, irqnames_r[index]); +if (key->irq_r <0 ) +return key->irq_r; + } + + error =of_property_read_u32 (child,"linux,keycodes" , &key->keycode); +if (error) { +dev_err (keys->dev, +"failed to read key:%d linux,keycode property: %d\n" , + index, error); +return error; + } + +if (of_property_present (child,"wakeup-source" )) + key->wakeup = true; + + error =mtk_pmic_key_setup (keys, key); +if (error) +return error; } -if (of_property_read_bool (child,"wakeup-source" )) - keys->keys[index].wakeup = true; - - error =mtk_pmic_key_setup (keys, &keys->keys[index]); -if (error) -return error; - index++; } --2.55.0
Re: [PATCHv2 1/2] Input: mtk-pmic-keys: use of_device_get_match_data()
In reply to Rosen PenevQuoted 9 lines · Rosen Penev
Instead of open coding it, use the proper function.
All entries have a corresponding data entry so a NULL check is not applied here.
Remove
of_device.has a result.Signed-off-by Rosen Penev <[email protected]>
Re: [PATCHv2 2/2] Input: mtk-pmic-keys: Count available keys during probe instead of pre-counting
In reply to Chen-Yu TsaiQuoted 113 lines · Chen-Yu Tsai
Quoted 5 lines · Rosen Penev
Replace the separate
of_get_available_child_count()pre-count and validation step with a single pass throughfor_each_child_of_node_scoped(). Skip unavailable child nodes and bail if more thanMTK_PMIC_MAX_KEY_COUNTavailable keys are found.This actually fixes a small bug. The pre-count only gets the number of available keys, but the subsequent
for_each_childblock doesn't skip over the unavailable ones, so if an unavailable node is in the middle of the tree, there could end up being a mismatch.Quoted 6 lines
Set nkeys after the loop so suspend/resume iterate only over initialized entries. Use a local key variable in the loop for clarity.
Add an irq > 0 guard to the suspend/resume wakeup paths so that uninitialized key entries are safely skipped.
You are trying to do too much in one patch. These other fixes should be in separate patches.
And why not just modify the driver to keep "nkeys", so that it knows how many entries are valid? No use in iterating over empty entries.
Quoted 71 lines
Assisted-by OpenCode:BigPickleSigned-off-by Rosen Penev <[email protected]>--- drivers/input/keyboard/mtk-pmic-keys.c | 71 ++++++++++++-------------- 1 file changed, 34 insertions(+), 37 deletions(-)drivers/input/keyboard/mtk-pmic-keys.c +6
-23@@ -267,7 +267,7 @@ static int mtk_pmic_keys_suspend(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {enable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )enable_irq_wake (keys->keys[index].irq_r);@@ -283,7 +283,7 @@ static int mtk_pmic_keys_resume(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {disable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )disable_irq_wake (keys->keys[index].irq_r);@@ -324,13 +324,13 @@ MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);static int mtk_pmic_keys_probe (struct platform_device *pdev) {int error, index =0 ; -unsigned int keycount;struct mt6397_chip *pmic_chip =dev_get_drvdata (pdev->dev.parent);struct device_node *node = pdev->dev.of_node;static const char *const irqnames[] = {"powerkey" ,"homekey" };static const char *const irqnames_r[] = {"powerkey_r" ,"homekey_r" };struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs; +struct mtk_pmic_keys_info *key;struct input_dev *input_dev; keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );@@ -353,45 +353,42 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) input_dev->id.product =0x0001 ; input_dev->id.version =0x0001 ; - keycount =of_get_available_child_count (node); -if (keycount >MTK_PMIC_MAX_KEY_COUNT || - keycount >ARRAY_SIZE (irqnames)) { -dev_err (keys->dev,"too many keys defined (%d)\n" , keycount); -return -EINVAL ; - } -for_each_child_of_node_scoped (node, child) { - keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; - - keys->keys[index].irq = -platform_get_irq_byname (pdev, irqnames[index]); -if (keys->keys[index].irq <0 ) -return keys->keys[index].irq; - -if (mtk_pmic_regs->key_release_irq) { - keys->keys[index].irq_r =platform_get_irq_byname (pdev, - irqnames_r[index]); - -if (keys->keys[index].irq_r <0 ) -return keys->keys[index].irq_r; +if (index >=MTK_PMIC_MAX_KEY_COUNT ) { +dev_err (&pdev->dev,"too many keys defined\n" ); +return -EINVAL ;drivers/input/keyboard/mtk-pmic-keys.c static int mtk_pmic_keys_probe(struct platform_device *pdev) · line 362
Quoted 10 lines
drivers/input/keyboard/mtk-pmic-keys.c +1
-7} - error =of_property_read_u32 (child, -"linux,keycodes" , &keys->keys[index].keycode); -if (error) { -dev_err (keys->dev, -"failed to read key:%d linux,keycode property: %d\n" , - index, error); -return error; +if (of_device_is_available (child)) {Instead of re-indenting the whole block and making the diff huge and unreadable, please make this skip over the remaining code when the condition fails, i.e.:
Quoted 2 lines
if (!of_device_is_available(child))
continue;Yeah probably better.
Quoted 3 lines
Or better yet, just use
for_each_available_child_of_node_scoped(){ ... } instead.
In v1 this is exactly what I did and was told not to.
Quoted 52 lines
I normally suggest people read the API docs (either on docs.kernel.org or the kernel-doc sections in the code) to find better suited constructs to use.
Thanks
ChenYuQuoted 43 lines
drivers/input/keyboard/mtk-pmic-keys.c +27
-8+ key = &keys->keys[index]; + key->regs = &mtk_pmic_regs->keys_regs[index]; + + key->irq =platform_get_irq_byname (pdev, irqnames[index]); +if (key->irq <0 ) +return key->irq; + +if (mtk_pmic_regs->key_release_irq) { + key->irq_r =platform_get_irq_byname (pdev, irqnames_r[index]); +if (key->irq_r <0 ) +return key->irq_r; + } + + error =of_property_read_u32 (child,"linux,keycodes" , &key->keycode); +if (error) { +dev_err (keys->dev, +"failed to read key:%d linux,keycode property: %d\n" , + index, error); +return error; + } + +if (of_property_present (child,"wakeup-source" )) + key->wakeup = true; + + error =mtk_pmic_key_setup (keys, key); +if (error) +return error; } -if (of_property_read_bool (child,"wakeup-source" )) - keys->keys[index].wakeup = true; - - error =mtk_pmic_key_setup (keys, &keys->keys[index]); -if (error) -return error; - index++; } --2.55.0
Re: [PATCHv2 2/2] Input: mtk-pmic-keys: Count available keys during probe instead of pre-counting
Quoted 115 lines · Rosen Penev
Quoted 113 lines · Chen-Yu Tsai
Quoted 5 lines · Rosen Penev
Replace the separate
of_get_available_child_count()pre-count and validation step with a single pass throughfor_each_child_of_node_scoped(). Skip unavailable child nodes and bail if more thanMTK_PMIC_MAX_KEY_COUNTavailable keys are found.This actually fixes a small bug. The pre-count only gets the number of available keys, but the subsequent
for_each_childblock doesn't skip over the unavailable ones, so if an unavailable node is in the middle of the tree, there could end up being a mismatch.Quoted 6 lines
Set nkeys after the loop so suspend/resume iterate only over initialized entries. Use a local key variable in the loop for clarity.
Add an irq > 0 guard to the suspend/resume wakeup paths so that uninitialized key entries are safely skipped.
You are trying to do too much in one patch. These other fixes should be in separate patches.
And why not just modify the driver to keep "nkeys", so that it knows how many entries are valid? No use in iterating over empty entries.
Quoted 71 lines
Assisted-by OpenCode:BigPickleSigned-off-by Rosen Penev <[email protected]>--- drivers/input/keyboard/mtk-pmic-keys.c | 71 ++++++++++++-------------- 1 file changed, 34 insertions(+), 37 deletions(-)drivers/input/keyboard/mtk-pmic-keys.c +6
-23@@ -267,7 +267,7 @@ static int mtk_pmic_keys_suspend(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {enable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )enable_irq_wake (keys->keys[index].irq_r);@@ -283,7 +283,7 @@ static int mtk_pmic_keys_resume(struct device *dev)int index;for (index =0 ; index <MTK_PMIC_MAX_KEY_COUNT ; index++) { -if (keys->keys[index].wakeup) { +if (keys->keys[index].irq >0 && keys->keys[index].wakeup) {disable_irq_wake (keys->keys[index].irq);if (keys->keys[index].irq_r >0 )disable_irq_wake (keys->keys[index].irq_r);@@ -324,13 +324,13 @@ MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);static int mtk_pmic_keys_probe (struct platform_device *pdev) {int error, index =0 ; -unsigned int keycount;struct mt6397_chip *pmic_chip =dev_get_drvdata (pdev->dev.parent);struct device_node *node = pdev->dev.of_node;static const char *const irqnames[] = {"powerkey" ,"homekey" };static const char *const irqnames_r[] = {"powerkey_r" ,"homekey_r" };struct mtk_pmic_keys *keys;const struct mtk_pmic_regs *mtk_pmic_regs; +struct mtk_pmic_keys_info *key;struct input_dev *input_dev; keys =devm_kzalloc (&pdev->dev,sizeof (*keys),GFP_KERNEL );@@ -353,45 +353,42 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) input_dev->id.product =0x0001 ; input_dev->id.version =0x0001 ; - keycount =of_get_available_child_count (node); -if (keycount >MTK_PMIC_MAX_KEY_COUNT || - keycount >ARRAY_SIZE (irqnames)) { -dev_err (keys->dev,"too many keys defined (%d)\n" , keycount); -return -EINVAL ; - } -for_each_child_of_node_scoped (node, child) { - keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; - - keys->keys[index].irq = -platform_get_irq_byname (pdev, irqnames[index]); -if (keys->keys[index].irq <0 ) -return keys->keys[index].irq; - -if (mtk_pmic_regs->key_release_irq) { - keys->keys[index].irq_r =platform_get_irq_byname (pdev, - irqnames_r[index]); - -if (keys->keys[index].irq_r <0 ) -return keys->keys[index].irq_r; +if (index >=MTK_PMIC_MAX_KEY_COUNT ) { +dev_err (&pdev->dev,"too many keys defined\n" ); +return -EINVAL ;drivers/input/keyboard/mtk-pmic-keys.c static int mtk_pmic_keys_probe(struct platform_device *pdev) · line 362
Quoted 10 lines
drivers/input/keyboard/mtk-pmic-keys.c +1
-7} - error =of_property_read_u32 (child, -"linux,keycodes" , &keys->keys[index].keycode); -if (error) { -dev_err (keys->dev, -"failed to read key:%d linux,keycode property: %d\n" , - index, error); -return error; +if (of_device_is_available (child)) {Instead of re-indenting the whole block and making the diff huge and unreadable, please make this skip over the remaining code when the condition fails, i.e.:
Quoted 7 lines
Quoted 2 lines
if (!of_device_is_available(child)) continue;Yeah probably better.
Quoted 3 lines
Or better yet, just use
for_each_available_child_of_node_scoped(){ ... } instead.In v1 this is exactly what I did and was told not to.
I see now that the interrupts are tied to each key in order, regardless whether the key is enabled or not. for_each_available_child_of_node_scoped() is not the right thing to use indeed.
Could you add this bit of context to the commit message?
Thanks
ChenYu
Quoted 52 lines
Quoted 52 lines
I normally suggest people read the API docs (either on docs.kernel.org or the kernel-doc sections in the code) to find better suited constructs to use.
Thanks
ChenYuQuoted 43 lines
drivers/input/keyboard/mtk-pmic-keys.c +27
-8+ key = &keys->keys[index]; + key->regs = &mtk_pmic_regs->keys_regs[index]; + + key->irq =platform_get_irq_byname (pdev, irqnames[index]); +if (key->irq <0 ) +return key->irq; + +if (mtk_pmic_regs->key_release_irq) { + key->irq_r =platform_get_irq_byname (pdev, irqnames_r[index]); +if (key->irq_r <0 ) +return key->irq_r; + } + + error =of_property_read_u32 (child,"linux,keycodes" , &key->keycode); +if (error) { +dev_err (keys->dev, +"failed to read key:%d linux,keycode property: %d\n" , + index, error); +return error; + } + +if (of_property_present (child,"wakeup-source" )) + key->wakeup = true; + + error =mtk_pmic_key_setup (keys, key); +if (error) +return error; } -if (of_property_read_bool (child,"wakeup-source" )) - keys->keys[index].wakeup = true; - - error =mtk_pmic_key_setup (keys, &keys->keys[index]); -if (error) -return error; - index++; } --2.55.0