Skip to contentSkip to conversation

ARM: dts: BCM5301X: AC56U: set WAN MAC from nvram

PATCH In review Rosen Penev 2 participants 2 messages Aug 5 – Sep 3

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: BCM5301X: AC56U: set WAN MAC from nvram

The WAN MAC is offset by 1. Set in dts to avoid having to handle this in userspace.

nvram size found from a random bootlog online.

---
 .../dts/broadcom/bcm4708-asus-rt-ac56u.dts    | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts +55 -0
index c80ac16ad949..df59136b076c 100644
@@ -25,6 +25,15 @@ memory@0 {
 		      <0x88000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -92,3 +101,49 @@ button-wps {
 &usb3_phy {
 	status = "okay";
 };
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
Signature · 1 line
2.55.0
maintainer
#1 lore raw
Quoted 6 lines · Rosen Penev

The WAN MAC is offset by 1. Set in dts to avoid having to handle this in userspace.

nvram size found from a random bootlog online.

You are doing two things here:

- assign the MAC address from NVRAM
- declare the switch ports along with their label

Please split this up in two separate patches, thank you.

Signature · 1 line
Florian