Skip to contentSkip to conversation

board: toradex: *-imx95: add support for Quickboot autosave in SPL

PATCH In review Stefan Eichenberger 2 participants 5 messages Aug 7 – Aug 10 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

cover board: toradex: *-imx95: add support for Quickboot autosave in SPL

Add support for Quickboot autosave in the SPL for the Aquila, Verdin, and Smarc boards from Toradex. Quickboot itself is enabled by default.

Stefan Eichenberger (3):
board: toradex: verdin-imx95: add SPL quick boot autosave support
board: toradex: smarc-imx95: add SPL quick boot autosave support
board: toradex: aquila-imx95: add SPL quick boot autosave support

 board/toradex/aquila-imx95/spl.c      | 4 ++++
 board/toradex/smarc-imx95/spl.c       | 4 ++++
 board/toradex/verdin-imx95/spl.c      | 4 ++++
 configs/aquila-imx95_defconfig        | 2 ++
 configs/toradex-smarc-imx95_defconfig | 2 ++
 configs/verdin-imx95_defconfig        | 2 ++
 6 files changed, 18 insertions(+)
Signature · 1 line
2.55.0
#3 lore raw

PATCH 3/3 board: toradex: aquila-imx95: add SPL quick boot autosave support

From: Stefan Eichenberger <[email protected]>

Add support for the QuickBoot save feature in the SPL for Aquila iMX95 modules to speed up boot time by skipping DDR training if a valid QuickBoot save is found. When CONFIG_SPL_IMX_QB is enabled, the settings will be stored automatically from the SPL. Otherwise, the command 'qb save mmc 0:1' must be used.

---
 board/toradex/aquila-imx95/spl.c | 4 ++++
 configs/aquila-imx95_defconfig   | 2 ++
 2 files changed, 6 insertions(+)
board/toradex/aquila-imx95/spl.c +4 -0
index 9f501c11c1d..93e76be6145 100644
@@ -6,6 +6,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/ele_api.h>
+#include <asm/mach-imx/qb.h>
 #include <asm/sections.h>
 #include <asm/global_data.h>
 #include <clk.h>
@@ -40,6 +41,9 @@ void spl_board_init(void)
 	ret = ele_start_rng();
 	if (ret)
 		printf("Fail to start RNG: %d\n", ret);
+
+	if (IS_ENABLED(CONFIG_SPL_IMX_QB))
+		spl_imx_qb_save();
 }
 
 void board_init_f(ulong dummy)
configs/aquila-imx95_defconfig +2 -0
index bb3d475ef4d..ee66cebfa4f 100644
@@ -26,6 +26,7 @@ CONFIG_SYS_LOAD_ADDR=0x90400000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=30000
 CONFIG_SPL=y
 CONFIG_SPL_RECOVER_DATA_SECTION=y
+CONFIG_SPL_IMX_QB=y
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x90000000
 CONFIG_SYS_MEMTEST_END=0xA0000000
@@ -59,6 +60,7 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MMC_WRITE=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_WATCHDOG=y
Signature · 1 line
2.55.0
#1 lore raw

PATCH 1/3 board: toradex: verdin-imx95: add SPL quick boot autosave support

In reply to Stefan Eichenberger

From: Stefan Eichenberger <[email protected]>

Add support for the QuickBoot save feature in the SPL for Verdin iMX95 modules to speed up boot time by skipping DDR training if a valid QuickBoot save is found. When CONFIG_SPL_IMX_QB is enabled, the settings will be stored automatically from the SPL. Otherwise, the command 'qb save mmc 0:1' must be used.

---
 board/toradex/verdin-imx95/spl.c | 4 ++++
 configs/verdin-imx95_defconfig   | 2 ++
 2 files changed, 6 insertions(+)
board/toradex/verdin-imx95/spl.c +4 -0
index 9f501c11c1d..93e76be6145 100644
@@ -6,6 +6,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/ele_api.h>
+#include <asm/mach-imx/qb.h>
 #include <asm/sections.h>
 #include <asm/global_data.h>
 #include <clk.h>
@@ -40,6 +41,9 @@ void spl_board_init(void)
 	ret = ele_start_rng();
 	if (ret)
 		printf("Fail to start RNG: %d\n", ret);
+
+	if (IS_ENABLED(CONFIG_SPL_IMX_QB))
+		spl_imx_qb_save();
 }
 
 void board_init_f(ulong dummy)
configs/verdin-imx95_defconfig +2 -0
index daf41a8b830..d7076231bbe 100644
@@ -26,6 +26,7 @@ CONFIG_SYS_LOAD_ADDR=0x90400000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=30000
 CONFIG_SPL=y
 CONFIG_SPL_RECOVER_DATA_SECTION=y
+CONFIG_SPL_IMX_QB=y
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x90000000
 CONFIG_SYS_MEMTEST_END=0xA0000000
@@ -60,6 +61,7 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MMC_WRITE=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_WATCHDOG=y
Signature · 1 line
2.55.0
#2 lore raw

PATCH 2/3 board: toradex: smarc-imx95: add SPL quick boot autosave support

In reply to Stefan Eichenberger

From: Stefan Eichenberger <[email protected]>

Add support for the QuickBoot save feature in the SPL for Toradex SMARC iMX95 modules to speed up boot time by skipping DDR training if a valid QuickBoot save is found. When CONFIG_SPL_IMX_QB is enabled, the settings will be stored automatically from the SPL. Otherwise, the command 'qb save mmc 0:1' must be used.

---
 board/toradex/smarc-imx95/spl.c       | 4 ++++
 configs/toradex-smarc-imx95_defconfig | 2 ++
 2 files changed, 6 insertions(+)
board/toradex/smarc-imx95/spl.c +4 -0
index ce8da89410b..aebb4a2f0b6 100644
@@ -6,6 +6,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/ele_api.h>
+#include <asm/mach-imx/qb.h>
 #include <asm/sections.h>
 #include <asm/global_data.h>
 #include <clk.h>
@@ -81,6 +82,9 @@ void spl_board_init(void)
 	ret = ele_start_rng();
 	if (ret)
 		printf("Fail to start RNG: %d\n", ret);
+
+	if (IS_ENABLED(CONFIG_SPL_IMX_QB))
+		spl_imx_qb_save();
 }
 
 void board_init_f(ulong dummy)
configs/toradex-smarc-imx95_defconfig +2 -0
index 9abadb0ed1a..b76d1fb3cd7 100644
@@ -26,6 +26,7 @@ CONFIG_SYS_LOAD_ADDR=0x90400000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=30000
 CONFIG_SPL=y
 CONFIG_SPL_RECOVER_DATA_SECTION=y
+CONFIG_SPL_IMX_QB=y
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x90000000
 CONFIG_SYS_MEMTEST_END=0xA0000000
@@ -59,6 +60,7 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MMC_WRITE=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_WATCHDOG=y
Signature · 1 line
2.55.0
Acked-by on the v1 series
#4 lore raw
In reply to Stefan Eichenberger
Quoted 7 lines · Stefan Eichenberger

Add support for Quickboot autosave in the SPL for the Aquila, Verdin, and Smarc boards from Toradex. Quickboot itself is enabled by default.

Stefan Eichenberger (3):
board: toradex: verdin-imx95: add SPL quick boot autosave support
board: toradex: smarc-imx95: add SPL quick boot autosave support
board: toradex: aquila-imx95: add SPL quick boot autosave support