ASoC: qcom: sc8280xp: configure codec sysclk for QCS615
Subsystems (4)
PATCH v2 1/1 ASoC: qcom: sc8280xp: configure codec sysclk for QCS615
Continuous high-amplitude noise could occur in the DA7213 microphone capture path after a Bluetooth out-of-range/reset event followed by reconnection. The noise was present in both the raw ALSA capture and PipeWire input, confirming that it originated before Bluetooth encoding.
The codec already obtains and enables MCLK through its DT clock and bias-level handling. However, the machine driver did not explicitly configure the codec sysclk during hw_params(). Enable codec_sysclk_set for QCS615 so that the DA7213 clock source and rate are configured before the codec power-up sequence.
Verified on QCS615 Talos with repeated Bluetooth disconnect and reconnect cycles. The noise was no longer reproducible.
---
v2:
- Drop the dependency note as the prerequisite changes are already present.
- Rebase onto current code and regenerate the patch.
sound/soc/qcom/sc8280xp.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/qcom/sc8280xp.c +1 -0
@@ -462,6 +462,7 @@ static const struct qcom_snd_soc_common qcs615_priv_data = { .driver_name = "qcs615", .dapm_widgets = sc8280xp_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(sc8280xp_dapm_widgets), + .codec_sysclk_set = true, };static const struct qcom_snd_soc_common qcm6490_priv_data = {
Signature · 1 line
2.34.1
Mark Brown
maintainerQuoted 1 line · On Mon, 10 Aug 2026 11:10:32 +0800, Le Qi wrote:
ASoC: qcom: sc8280xp: configure codec sysclk for QCS615
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3
Thanks!
[1/1] ASoC: qcom: sc8280xp: configure codec sysclk for QCS615
https://git.kernel.org/broonie/sound/c/530e344e4b7e
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark