ALSA: hda/realtek: Fix quiet 3.5mm jacks on Beelink SER6
PATCH 1/1 ALSA: hda/realtek: Fix quiet 3.5mm jacks on Beelink SER6
Both the front headphone jack and the rear line-out jack play back at a barely audible volume on the Beelink SER6 Max (ALC897, PCI subsystem ID 1f66:0202), even with all mixer controls at 0dB. GPIO2 on the codec gates an external headphone/line amplifier that the generic parser never enables. Add a fixup that asserts it. Verified fixed on both jacks.
--- sound/hda/codecs/realtek/alc662.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
sound/hda/codecs/realtek/alc662.c +10 -0
@@ -324,6 +324,7 @@ enum {ALC897_FIXUP_HEADSET_MIC_PIN2 ,ALC897_FIXUP_UNIS_H3C_X500S ,ALC897_FIXUP_HEADSET_MIC_PIN3 , +ALC897_FIXUP_BEELINK_SER6_AMP , ALC662_FIXUP_CSL_GPIO, };
@@ -778,6 +779,14 @@ static const struct hda_fixup alc662_fixups[] = { { } }, }, + [ALC897_FIXUP_BEELINK_SER6_AMP] = { +/* Beelink SER6 Max (Ryzen 6900HX) both 3.5mm jacks are very +* quiet without this: GPIO2 gates an external headphone/line +* amplifier that the generic parser never enables. +*/ + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_gpio4, + }, [ALC662_FIXUP_CSL_GPIO] = { .type = HDA_FIXUP_FUNC, .v.func = alc662_fixup_csl_amp,
@@ -788,6 +797,7 @@ static const struct hda_quirk alc662_fixup_tbl[] = {SND_PCI_QUIRK (0x1019 ,0x9087 ,"ECS" ,ALC662_FIXUP_ASUS_MODE2 ),SND_PCI_QUIRK (0x1019 ,0x9859 ,"JP-IK LEAP W502" ,ALC897_FIXUP_HEADSET_MIC_PIN3 ),SND_PCI_QUIRK (0x1022 ,0xc950 ,"CSL Unity BF24B" ,ALC662_FIXUP_CSL_GPIO ), +SND_PCI_QUIRK (0x1f66 ,0x0202 ,"Beelink SER6 Max 6900" ,ALC897_FIXUP_BEELINK_SER6_AMP ),SND_PCI_QUIRK (0x1025 ,0x022f ,"Acer Aspire One" ,ALC662_FIXUP_INV_DMIC ),SND_PCI_QUIRK (0x1025 ,0x0241 ,"Packard Bell DOTS" ,ALC662_FIXUP_INV_DMIC ), SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
Signature · 1 line
2.55.0
Quoted 41 lines · Brian Koebbe
Both the front headphone jack and the rear line-out jack play back at a barely audible volume on the Beelink SER6 Max (ALC897, PCI subsystem ID 1f66:0202), even with all mixer controls at 0dB. GPIO2 on the codec gates an external headphone/line amplifier that the generic parser never enables. Add a fixup that asserts it. Verified fixed on both jacks.
Signed-off-by Brian Koebbe <[email protected]>--- sound/hda/codecs/realtek/alc662.c | 10 ++++++++++ 1 file changed, 10 insertions(+)sound/hda/codecs/realtek/alc662.c +9
-0@@ -324,6 +324,7 @@ enum {ALC897_FIXUP_HEADSET_MIC_PIN2 ,ALC897_FIXUP_UNIS_H3C_X500S ,ALC897_FIXUP_HEADSET_MIC_PIN3 , +ALC897_FIXUP_BEELINK_SER6_AMP , ALC662_FIXUP_CSL_GPIO, };@@ -778,6 +779,14 @@ static const struct hda_fixup alc662_fixups[] = { { } }, }, + [ALC897_FIXUP_BEELINK_SER6_AMP] = { +/* Beelink SER6 Max (Ryzen 6900HX) both 3.5mm jacks are very +* quiet without this: GPIO2 gates an external headphone/line +* amplifier that the generic parser never enables. +*/ + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_gpio4, + }, [ALC662_FIXUP_CSL_GPIO] = { .type = HDA_FIXUP_FUNC, .v.func = alc662_fixup_csl_amp,
sound/hda/codecs/realtek/alc662.c static const struct hda_quirk alc662_fixup_tbl[] = { · line 803
Quoted 7 lines
sound/hda/codecs/realtek/alc662.c +1
-0@@ -788,6 +797,7 @@ static const struct hda_quirk alc662_fixup_tbl[] = {SND_PCI_QUIRK (0x1019 ,0x9087 ,"ECS" ,ALC662_FIXUP_ASUS_MODE2 ),SND_PCI_QUIRK (0x1019 ,0x9859 ,"JP-IK LEAP W502" ,ALC897_FIXUP_HEADSET_MIC_PIN3 ),SND_PCI_QUIRK (0x1022 ,0xc950 ,"CSL Unity BF24B" ,ALC662_FIXUP_CSL_GPIO ), +SND_PCI_QUIRK (0x1f66 ,0x0202 ,"Beelink SER6 Max 6900" ,ALC897_FIXUP_BEELINK_SER6_AMP ),SND_PCI_QUIRK (0x1025 ,0x022f ,"Acer Aspire One" ,ALC662_FIXUP_INV_DMIC ),SND_PCI_QUIRK (0x1025 ,0x0241 ,"Packard Bell DOTS" ,ALC662_FIXUP_INV_DMIC ), SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
The table is sorted in PCI SSID order. Could you try to put the new entry at the right position, and resubmit the corrected patch?
thanks,
Takashi