lib: sbi: Fix DBTR error codes and semantics as per SBI v3.0 spec
PATCH 1/1 lib: sbi: Fix DBTR error codes and semantics as per SBI v3.0 spec
Align the Debug Triggers (DBTR) extension implementation with the error codes and behavior required by the SBI v3.0 specification, chapter 19:
- sbi_debug_set_shmem (sec 19.2): accept the flags parameter and return SBI_ERR_INVALID_PARAM when it is not zero. Also validate the entire shared memory range of trig_max * (XLEN / 2) bytes instead of only the base address, returning SBI_ERR_INVALID_ADDRESS when the range is not accessible.
- sbi_debug_install_triggers (sec 19.4, table 101): return SBI_ERR_BAD_RANGE when trig_count >= trig_max, and return SBI_ERR_NOT_SUPPORTED instead of SBI_ERR_FAILED when the trigger type is not supported.
- sbi_debug_update_triggers (sec 19.5, table 102): return the array index of the failing trigger configuration in sbiret.value, and return SBI_ERR_INVALID_PARAM when trig_tdata1.type or trig_tdata1.chain do not match the originally installed debug trigger. Validate the complete request before updating any trigger.
- sbi_debug_uninstall_triggers, sbi_debug_enable_triggers and sbi_debug_disable_triggers (secs 19.6-19.8, tables 103-105): return SBI_ERR_INVALID_PARAM when any trigger in the set has trig_idx >= trig_max, and validate the complete set before acting on any trigger so a partially processed batch is not left behind.
- Set the trig_state.have_hw_trig bit when a trigger is mapped to a HW debug trigger (table 98).
--- include/sbi/sbi_dbtr.h | 5 ++- lib/sbi/sbi_dbtr.c | 91 +++++++++++++++++++++++++++++++++------- lib/sbi/sbi_ecall_dbtr.c | 4 +- 3 files changed, 81 insertions(+), 19 deletions(-)
include/sbi/sbi_dbtr.h +3 -2
@@ -104,7 +104,8 @@ int sbi_dbtr_init(struct sbi_scratch *scratch, bool coldboot);int sbi_dbtr_supported (void );int sbi_dbtr_setup_shmem (const struct sbi_domain *dom,unsigned long smode,unsigned long shmem_phys_lo, -unsigned long shmem_phys_hi); +unsigned long shmem_phys_hi, +unsigned long flags);int sbi_dbtr_num_trig (unsigned long trig_tdata1,unsigned long *out);int sbi_dbtr_read_trig (unsigned long smode,unsigned long trig_idx_base,unsigned long trig_count);
@@ -115,7 +116,7 @@ int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,int sbi_dbtr_enable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);int sbi_dbtr_update_trig (unsigned long smode, -unsigned long trig_count); +unsigned long trig_count,unsigned long *out);int sbi_dbtr_disable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);
lib/sbi/sbi_dbtr.c +76 -15
174 lines not on this page · raw message
lib/sbi/sbi_ecall_dbtr.c +2 -2
@@ -28,7 +28,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid,break ;case SBI_EXT_DBTR_SETUP_SHMEM : ret =sbi_dbtr_setup_shmem (sbi_domain_thishart_ptr (), smode, - regs->a0, regs->a1); + regs->a0, regs->a1, regs->a2);break ;case SBI_EXT_DBTR_TRIGGER_READ : ret =sbi_dbtr_read_trig (smode, regs->a0, regs->a1);
@@ -43,7 +43,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid, ret =sbi_dbtr_enable_trig (regs->a0, regs->a1);break ;case SBI_EXT_DBTR_TRIGGER_UPDATE : - ret =sbi_dbtr_update_trig (smode, regs->a0); + ret =sbi_dbtr_update_trig (smode, regs->a0, &out->value);break ;case SBI_EXT_DBTR_TRIGGER_DISABLE : ret =sbi_dbtr_disable_trig (regs->a0, regs->a1);
Signature · 7 lines
2.43.0 -- opensbi mailing list [email protected] http://lists.infradead.org/mailman/listinfo/opensbi
Quoted 22 lines · David E. Garcia Porras
Align the Debug Triggers (DBTR) extension implementation with the error codes and behavior required by the SBI v3.0 specification, chapter 19:
-
sbi_debug_set_shmem(sec 19.2): accept the flags parameter and returnSBI_ERR_INVALID_PARAMwhen it is not zero. Also validate the entire shared memory range oftrig_max* (XLEN / 2) bytes instead of only the base address, returningSBI_ERR_INVALID_ADDRESSwhen the range is not accessible.-
sbi_debug_install_triggers(sec 19.4, table 101): returnSBI_ERR_BAD_RANGEwhentrig_count>=trig_max, and returnSBI_ERR_NOT_SUPPORTEDinstead ofSBI_ERR_FAILEDwhen the trigger type is not supported.-
sbi_debug_update_triggers(sec 19.5, table 102): return the array index of the failing trigger configuration in sbiret.value, and returnSBI_ERR_INVALID_PARAMwhen trig_tdata1.type or trig_tdata1.chain do not match the originally installed debug trigger. Validate the complete request before updating any trigger.
Quoted 5 lines
-
sbi_debug_uninstall_triggers,sbi_debug_enable_triggersandsbi_debug_disable_triggers(secs 19.6-19.8, tables 103-105): returnSBI_ERR_INVALID_PARAMwhen any trigger in the set hastrig_idx>=trig_max, and validate the complete set before acting on any trigger so a partially processed batch is not left behind.
Too many changes in a single patch. Please try to split each change into separate patch.
Regards,
Anup
Quoted 253 lines
- Set the trig_state.have_hw_trig bit when a trigger is mapped to a HW debug trigger (table 98).
Signed-off-by David E. Garcia Porras <[email protected]>--- include/sbi/sbi_dbtr.h | 5 ++- lib/sbi/sbi_dbtr.c | 91 +++++++++++++++++++++++++++++++++------- lib/sbi/sbi_ecall_dbtr.c | 4 +- 3 files changed, 81 insertions(+), 19 deletions(-)include/sbi/sbi_dbtr.h +3
-2@@ -104,7 +104,8 @@ int sbi_dbtr_init(struct sbi_scratch *scratch, bool coldboot);int sbi_dbtr_supported (void );int sbi_dbtr_setup_shmem (const struct sbi_domain *dom,unsigned long smode,unsigned long shmem_phys_lo, -unsigned long shmem_phys_hi); +unsigned long shmem_phys_hi, +unsigned long flags);int sbi_dbtr_num_trig (unsigned long trig_tdata1,unsigned long *out);int sbi_dbtr_read_trig (unsigned long smode,unsigned long trig_idx_base,unsigned long trig_count);@@ -115,7 +116,7 @@ int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,int sbi_dbtr_enable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);int sbi_dbtr_update_trig (unsigned long smode, -unsigned long trig_count); +unsigned long trig_count,unsigned long *out);int sbi_dbtr_disable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);lib/sbi/sbi_dbtr.c +76
-15@@ -261,8 +261,10 @@ int sbi_dbtr_get_total_triggers(void)int sbi_dbtr_setup_shmem (const struct sbi_domain *dom,unsigned long smode,unsigned long shmem_phys_lo, -unsigned long shmem_phys_hi) +unsigned long shmem_phys_hi, +unsigned long flags) { +unsigned long shmem_size;struct sbi_dbtr_hart_triggers_state *hart_state;if (dom && !sbi_domain_is_assigned_hart (dom,current_hartindex ())) {@@ -271,6 +273,9 @@ int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,return SBI_ERR_DENIED ; } +if (flags) +return SBI_ERR_INVALID_PARAM ; + hart_state =dbtr_thishart_state_ptr ();if (!hart_state)return SBI_ERR_FAILED ;@@ -304,9 +309,11 @@ int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,if (shmem_phys_hi)return SBI_EINVALID_ADDR ; -if (dom && !sbi_domain_check_addr (dom, -DBTR_SHMEM_MAKE_PHYS (shmem_phys_hi, shmem_phys_lo), smode, -SBI_DOMAIN_READ |SBI_DOMAIN_WRITE )) +/* Must fail if address *range* is not fully accessible - size is assumed to be trig_max * (XLEN /2) bytes */ + shmem_size = (unsigned long ) hart_state->total_trigs * (__riscv_xlen /2 ); +if (dom && !sbi_domain_check_addr_range (dom, +DBTR_SHMEM_MAKE_PHYS (shmem_phys_hi, shmem_phys_lo), shmem_size, + smode,SBI_DOMAIN_READ |SBI_DOMAIN_WRITE ))return SBI_ERR_INVALID_ADDRESS ; hart_state->shmem.phys_lo = shmem_phys_lo;@@ -332,6 +339,7 @@ static void dbtr_trigger_setup(struct sbi_dbtr_trigger *trig, trig->state =0 ;__set_bit (RV_DBTR_BIT (TS ,MAPPED ), &trig->state); +__set_bit (RV_DBTR_BIT (TS ,HAVE_TRIG ), &trig->state);SET_TRIG_HW_INDEX (trig->state, trig->index);@@ -616,6 +624,9 @@ int sbi_dbtr_install_trig(unsigned long smode,if (!hs)return SBI_ERR_FAILED ; +if (trig_count >= hs->total_trigs) +return SBI_ERR_BAD_RANGE ; +if (sbi_dbtr_shmem_disabled (hs))return SBI_ERR_NO_SHMEM ;@@ -641,7 +652,7 @@ int sbi_dbtr_install_trig(unsigned long smode, *out = _idx;sbi_hart_protection_unmap_range ((unsigned long )shmem_base, trig_count *sizeof (*entry)); -return SBI_ERR_FAILED ; +return SBI_ERR_NOT_SUPPORTED ; }if (!dbtr_trigger_valid (TDATA1_GET_TYPE (ctrl), ctrl)) {@@ -702,13 +713,17 @@ int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; -for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) { trig =INDEX_TO_TRIGGER (idx); -if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED ))) +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs)return SBI_ERR_INVALID_PARAM ; + } +/* Only uninstall after validating the arguments - maintain atomicity */ + idx = trig_idx_base; +for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { + trig =INDEX_TO_TRIGGER (idx);dbtr_trigger_clear (trig); -sbi_free_trigger (trig); }@@ -727,6 +742,14 @@ int sbi_dbtr_enable_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) { + trig =INDEX_TO_TRIGGER (idx); +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs) +return SBI_ERR_INVALID_PARAM ; + } + +/* Only enable after validating the arguments - maintain atomicity */ + idx = trig_idx_base;for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { trig =INDEX_TO_TRIGGER (idx);sbi_dprintf ("%s: enable trigger %lu\n" , __func__, idx);@@ -737,8 +760,9 @@ int sbi_dbtr_enable_trig(unsigned long trig_idx_base, }int sbi_dbtr_update_trig (unsigned long smode, -unsigned long trig_count) +unsigned long trig_count,unsigned long *out) { +int stat =SBI_SUCCESS ;unsigned long trig_idx;struct sbi_dbtr_trigger *trig;union sbi_dbtr_shmem_entry *entry;@@ -772,23 +796,52 @@ int sbi_dbtr_update_trig(unsigned long smode, trig_idx = entry->id.idx;if (trig_idx >= hs->total_trigs) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_INVALID_PARAM ; + stat =SBI_ERR_INVALID_PARAM ; + goto endloop; } trig =INDEX_TO_TRIGGER (trig_idx);if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED ))) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_FAILED ; + stat =SBI_ERR_FAILED ; + goto endloop; + } + +if (TDATA1_GET_TYPE (entry->data.tdata1) !=TDATA1_GET_TYPE (trig->tdata1)) { + stat =SBI_ERR_INVALID_PARAM ; + goto endloop; + } + +switch (TDATA1_GET_TYPE (entry->data.tdata1)) { +case RISCV_DBTR_TRIG_MCONTROL : +case RISCV_DBTR_TRIG_MCONTROL6 : +if ( (entry->data.tdata1 &RV_DBTR_BIT_MASK (MC6 ,CHAIN )) != (trig->tdata1 &RV_DBTR_BIT_MASK (MC6 ,CHAIN )) ) { + stat =SBI_ERR_INVALID_PARAM ; + goto endloop; + } +break ; +default : +break ; }if ((entry->data.tdata2 && !tdata2_impl) || (entry->data.tdata3 && !tdata3_impl)) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_NOT_SUPPORTED ; + stat =SBI_ERR_NOT_SUPPORTED ; + goto endloop; } + endloop: +sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); +if (stat !=SBI_SUCCESS ) { + *out = _idx; +return stat; + } + } + +/* Only update after validating request - maintain atomicity */ +for_each_trig_entry (shmem_base, trig_count,typeof (*entry), entry) { +sbi_hart_protection_map_range ((unsigned long )entry,sizeof (*entry)); + trig =INDEX_TO_TRIGGER (entry->id.idx);dbtr_trigger_setup (trig, &entry->data);sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry));dbtr_trigger_enable (trig);@@ -809,6 +862,14 @@ int sbi_dbtr_disable_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) { + trig =INDEX_TO_TRIGGER (idx); +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs) +return SBI_ERR_INVALID_PARAM ; + } + +/* Only disable after validating the arguments - maintain atomicity */ + idx = trig_idx_base;for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { trig =INDEX_TO_TRIGGER (idx);dbtr_trigger_disable (trig);lib/sbi/sbi_ecall_dbtr.c +2
-3@@ -28,7 +28,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid,break ;case SBI_EXT_DBTR_SETUP_SHMEM : ret =sbi_dbtr_setup_shmem (sbi_domain_thishart_ptr (), smode, - regs->a0, regs->a1); + regs->a0, regs->a1, regs->a2);break ;case SBI_EXT_DBTR_TRIGGER_READ : ret =sbi_dbtr_read_trig (smode, regs->a0, regs->a1);@@ -43,7 +43,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid, ret =sbi_dbtr_enable_trig (regs->a0, regs->a1);break ;case SBI_EXT_DBTR_TRIGGER_UPDATE : - ret =sbi_dbtr_update_trig (smode, regs->a0); + ret =sbi_dbtr_update_trig (smode, regs->a0, &out->value);break ;case SBI_EXT_DBTR_TRIGGER_DISABLE : ret =sbi_dbtr_disable_trig (regs->a0, regs->a1); --2.43.0
--
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi
Signature · 3 lines
opensbi mailing list [email protected] http://lists.infradead.org/mailman/listinfo/opensbi
HI David,
Quoted 129 lines · David E. Garcia Porras
Align the Debug Triggers (DBTR) extension implementation with the error codes and behavior required by the SBI v3.0 specification, chapter 19:
-
sbi_debug_set_shmem(sec 19.2): accept the flags parameter and returnSBI_ERR_INVALID_PARAMwhen it is not zero. Also validate the entire shared memory range oftrig_max* (XLEN / 2) bytes instead of only the base address, returningSBI_ERR_INVALID_ADDRESSwhen the range is not accessible.-
sbi_debug_install_triggers(sec 19.4, table 101): returnSBI_ERR_BAD_RANGEwhentrig_count>=trig_max, and returnSBI_ERR_NOT_SUPPORTEDinstead ofSBI_ERR_FAILEDwhen the trigger type is not supported.-
sbi_debug_update_triggers(sec 19.5, table 102): return the array index of the failing trigger configuration in sbiret.value, and returnSBI_ERR_INVALID_PARAMwhen trig_tdata1.type or trig_tdata1.chain do not match the originally installed debug trigger. Validate the complete request before updating any trigger.-
sbi_debug_uninstall_triggers,sbi_debug_enable_triggersandsbi_debug_disable_triggers(secs 19.6-19.8, tables 103-105): returnSBI_ERR_INVALID_PARAMwhen any trigger in the set hastrig_idx>=trig_max, and validate the complete set before acting on any trigger so a partially processed batch is not left behind.- Set the trig_state.have_hw_trig bit when a trigger is mapped to a HW debug trigger (table 98).
Signed-off-by David E. Garcia Porras <[email protected]>--- include/sbi/sbi_dbtr.h | 5 ++- lib/sbi/sbi_dbtr.c | 91 +++++++++++++++++++++++++++++++++------- lib/sbi/sbi_ecall_dbtr.c | 4 +- 3 files changed, 81 insertions(+), 19 deletions(-)include/sbi/sbi_dbtr.h +3
-2@@ -104,7 +104,8 @@ int sbi_dbtr_init(struct sbi_scratch *scratch, bool coldboot);int sbi_dbtr_supported (void );int sbi_dbtr_setup_shmem (const struct sbi_domain *dom,unsigned long smode,unsigned long shmem_phys_lo, -unsigned long shmem_phys_hi); +unsigned long shmem_phys_hi, +unsigned long flags);int sbi_dbtr_num_trig (unsigned long trig_tdata1,unsigned long *out);int sbi_dbtr_read_trig (unsigned long smode,unsigned long trig_idx_base,unsigned long trig_count);@@ -115,7 +116,7 @@ int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,int sbi_dbtr_enable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);int sbi_dbtr_update_trig (unsigned long smode, -unsigned long trig_count); +unsigned long trig_count,unsigned long *out);int sbi_dbtr_disable_trig (unsigned long trig_idx_base,unsigned long trig_idx_mask);lib/sbi/sbi_dbtr.c +16
-5@@ -261,8 +261,10 @@ int sbi_dbtr_get_total_triggers(void)int sbi_dbtr_setup_shmem (const struct sbi_domain *dom,unsigned long smode,unsigned long shmem_phys_lo, -unsigned long shmem_phys_hi) +unsigned long shmem_phys_hi, +unsigned long flags) { +unsigned long shmem_size;struct sbi_dbtr_hart_triggers_state *hart_state;if (dom && !sbi_domain_is_assigned_hart (dom,current_hartindex ())) {@@ -271,6 +273,9 @@ int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,return SBI_ERR_DENIED ; } +if (flags) +return SBI_ERR_INVALID_PARAM ; + hart_state =dbtr_thishart_state_ptr ();if (!hart_state)return SBI_ERR_FAILED ;@@ -304,9 +309,11 @@ int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,if (shmem_phys_hi)return SBI_EINVALID_ADDR ; -if (dom && !sbi_domain_check_addr (dom, -DBTR_SHMEM_MAKE_PHYS (shmem_phys_hi, shmem_phys_lo), smode, -SBI_DOMAIN_READ |SBI_DOMAIN_WRITE )) +/* Must fail if address *range* is not fully accessible - size is assumed to be trig_max * (XLEN /2) bytes */ + shmem_size = (unsigned long ) hart_state->total_trigs * (__riscv_xlen /2 ); +if (dom && !sbi_domain_check_addr_range (dom, +DBTR_SHMEM_MAKE_PHYS (shmem_phys_hi, shmem_phys_lo), shmem_size, + smode,SBI_DOMAIN_READ |SBI_DOMAIN_WRITE ))return SBI_ERR_INVALID_ADDRESS ; hart_state->shmem.phys_lo = shmem_phys_lo;@@ -332,6 +339,7 @@ static void dbtr_trigger_setup(struct sbi_dbtr_trigger *trig, trig->state =0 ;__set_bit (RV_DBTR_BIT (TS ,MAPPED ), &trig->state); +__set_bit (RV_DBTR_BIT (TS ,HAVE_TRIG ), &trig->state);SET_TRIG_HW_INDEX (trig->state, trig->index);@@ -616,6 +624,9 @@ int sbi_dbtr_install_trig(unsigned long smode,if (!hs)return SBI_ERR_FAILED ; +if (trig_count >= hs->total_trigs) +return SBI_ERR_BAD_RANGE ; +if (sbi_dbtr_shmem_disabled (hs))return SBI_ERR_NO_SHMEM ;@@ -641,7 +652,7 @@ int sbi_dbtr_install_trig(unsigned long smode, *out = _idx;sbi_hart_protection_unmap_range ((unsigned long )shmem_base, trig_count *sizeof (*entry)); -return SBI_ERR_FAILED ; +return SBI_ERR_NOT_SUPPORTED ; }if (!dbtr_trigger_valid (TDATA1_GET_TYPE (ctrl), ctrl)) {
lib/sbi/sbi_dbtr.c int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base, · line 716
Quoted 5 lines
lib/sbi/sbi_dbtr.c +1
-1@@ -702,13 +713,17 @@ int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; -for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) {
Why RV_MAX_TRIGGERS? hs->total_trigs may be less than RV_MAX_TRIGGERS and you will want to work only on available triggers.
lib/sbi/sbi_dbtr.c int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base, · line 718
Quoted 3 lines
lib/sbi/sbi_dbtr.c +1
-1trig =INDEX_TO_TRIGGER (idx); -if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED ))) +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs)
Better add a boolean macro IS_TRIGGER_MAPPED(trig).
Quoted 13 lines
lib/sbi/sbi_dbtr.c +5
-1return SBI_ERR_INVALID_PARAM ; + } +/* Only uninstall after validating the arguments - maintain atomicity */ + idx = trig_idx_base; +for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { + trig =INDEX_TO_TRIGGER (idx);dbtr_trigger_clear (trig); -sbi_free_trigger (trig); }
lib/sbi/sbi_dbtr.c int sbi_dbtr_enable_trig(unsigned long trig_idx_base, · line 745
Quoted 4 lines
lib/sbi/sbi_dbtr.c +1
-0@@ -727,6 +742,14 @@ int sbi_dbtr_enable_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) {
ditto.
lib/sbi/sbi_dbtr.c int sbi_dbtr_enable_trig(unsigned long trig_idx_base, · line 753
Quoted 8 lines
lib/sbi/sbi_dbtr.c +7
-0+ trig =INDEX_TO_TRIGGER (idx); +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs) +return SBI_ERR_INVALID_PARAM ; + } + +/* Only enable after validating the arguments - maintain atomicity */ + idx = trig_idx_base;for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) {
If RV_MAX_TRIGGERS there, then why total_trigs here?
Quoted 31 lines
lib/sbi/sbi_dbtr.c +7
-5trig =INDEX_TO_TRIGGER (idx);sbi_dprintf ("%s: enable trigger %lu\n" , __func__, idx);@@ -737,8 +760,9 @@ int sbi_dbtr_enable_trig(unsigned long trig_idx_base, }int sbi_dbtr_update_trig (unsigned long smode, -unsigned long trig_count) +unsigned long trig_count,unsigned long *out) { +int stat =SBI_SUCCESS ;unsigned long trig_idx;struct sbi_dbtr_trigger *trig;union sbi_dbtr_shmem_entry *entry;@@ -772,23 +796,52 @@ int sbi_dbtr_update_trig(unsigned long smode, trig_idx = entry->id.idx;if (trig_idx >= hs->total_trigs) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_INVALID_PARAM ; + stat =SBI_ERR_INVALID_PARAM ; + goto endloop; } trig =INDEX_TO_TRIGGER (trig_idx);if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED ))) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_FAILED ; + stat =SBI_ERR_FAILED ; + goto endloop; + }
lib/sbi/sbi_dbtr.c int sbi_dbtr_update_trig(unsigned long smode, · line 818
Quoted 10 lines
lib/sbi/sbi_dbtr.c +10
-0+ +if (TDATA1_GET_TYPE (entry->data.tdata1) !=TDATA1_GET_TYPE (trig->tdata1)) { + stat =SBI_ERR_INVALID_PARAM ; + goto endloop; + } + +switch (TDATA1_GET_TYPE (entry->data.tdata1)) { +case RISCV_DBTR_TRIG_MCONTROL : +case RISCV_DBTR_TRIG_MCONTROL6 : +if ( (entry->data.tdata1 &RV_DBTR_BIT_MASK (MC6 ,CHAIN )) != (trig->tdata1 &RV_DBTR_BIT_MASK (MC6 ,CHAIN )) ) {
Exceeds char limit. Also would you please add comments? Add a boolean macro IS_TRIGGER_CHAINED(trig).
Quoted 12 lines
lib/sbi/sbi_dbtr.c +6
-2+ stat =SBI_ERR_INVALID_PARAM ; + goto endloop; + } +break ; +default : +break ; }if ((entry->data.tdata2 && !tdata2_impl) || (entry->data.tdata3 && !tdata3_impl)) { -sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); -return SBI_ERR_NOT_SUPPORTED ;
lib/sbi/sbi_dbtr.c int sbi_dbtr_update_trig(unsigned long smode, · line 838
Quoted 10 lines
lib/sbi/sbi_dbtr.c +8
-0+ stat =SBI_ERR_NOT_SUPPORTED ; + goto endloop; } + endloop: +sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry)); +if (stat !=SBI_SUCCESS ) { + *out = _idx; +return stat; + }
Is this necessary? End of function error cleanup would be a better place. Right now its same as before.
Quoted 10 lines
lib/sbi/sbi_dbtr.c +6
-0+ } + +/* Only update after validating request - maintain atomicity */ +for_each_trig_entry (shmem_base, trig_count,typeof (*entry), entry) { +sbi_hart_protection_map_range ((unsigned long )entry,sizeof (*entry)); + trig =INDEX_TO_TRIGGER (entry->id.idx);dbtr_trigger_setup (trig, &entry->data);sbi_hart_protection_unmap_range ((unsigned long )entry,sizeof (*entry));dbtr_trigger_enable (trig);
lib/sbi/sbi_dbtr.c int sbi_dbtr_disable_trig(unsigned long trig_idx_base, · line 865
Quoted 4 lines
lib/sbi/sbi_dbtr.c +1
-0@@ -809,6 +862,14 @@ int sbi_dbtr_disable_trig(unsigned long trig_idx_base,if (!hs)return SBI_ERR_FAILED ; +for_each_set_bit_from (idx, &trig_mask,RV_MAX_TRIGGERS ) {
Again why not total_trigs? There is inconsistencies.
lib/sbi/sbi_dbtr.c int sbi_dbtr_disable_trig(unsigned long trig_idx_base, · line 872
Quoted 7 lines
lib/sbi/sbi_dbtr.c +7
-0+ trig =INDEX_TO_TRIGGER (idx); +if (!(trig->state &RV_DBTR_BIT_MASK (TS ,MAPPED )) || idx >= hs->total_trigs) +return SBI_ERR_INVALID_PARAM ; + } + +/* Only disable after validating the arguments - maintain atomicity */ + idx = trig_idx_base;
You should probably wait for @liutong patches which try to fix TOCTOU.
Quoted 17 lines
lib/sbi/sbi_dbtr.c +0
-0for_each_set_bit_from (idx, &trig_mask, hs->total_trigs) { trig =INDEX_TO_TRIGGER (idx);dbtr_trigger_disable (trig);lib/sbi/sbi_ecall_dbtr.c +1
-1@@ -28,7 +28,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid,break ;case SBI_EXT_DBTR_SETUP_SHMEM : ret =sbi_dbtr_setup_shmem (sbi_domain_thishart_ptr (), smode, - regs->a0, regs->a1); + regs->a0, regs->a1, regs->a2);break ;case SBI_EXT_DBTR_TRIGGER_READ : ret =sbi_dbtr_read_trig (smode, regs->a0, regs->a1);
lib/sbi/sbi_ecall_dbtr.c static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid, · line 49
Quoted 8 lines
lib/sbi/sbi_ecall_dbtr.c +1
-1@@ -43,7 +43,7 @@ static int sbi_ecall_dbtr_handler(unsigned long extid, unsigned long funcid, ret =sbi_dbtr_enable_trig (regs->a0, regs->a1);break ;case SBI_EXT_DBTR_TRIGGER_UPDATE : - ret =sbi_dbtr_update_trig (smode, regs->a0); + ret =sbi_dbtr_update_trig (smode, regs->a0, &out->value);break ;case SBI_EXT_DBTR_TRIGGER_DISABLE : ret =sbi_dbtr_disable_trig (regs->a0, regs->a1);
As Anup said, please break it down to a series of patches rather than one huge patch.
Regards
Himanshu
Quoted 8 lines
Signature · 7 lines
2.43.0 -- opensbi mailing list [email protected] http://lists.infradead.org/mailman/listinfo/opensbi
Signature · 3 lines
opensbi mailing list [email protected] http://lists.infradead.org/mailman/listinfo/opensbi