Skip to contentSkip to conversation

wifi: mt76: mt7925: Fix MCU command timeouts during module unload

PATCH New Eason Lai 1 participant 1 message Aug 17

Subsystems (2)
lore
Share & tools
lore

Eason Lai

author
#0 lore raw

PATCH v3 1/1 wifi: mt76: mt7925: Fix MCU command timeouts during module unload

Move MT76_REMOVED flag setting from mt7925_pci_remove() to after mt76_unregister_device() completes. Setting it too early causes mt792x_irq_handler() to drop MCU completion interrupts, timing out teardown commands (scan abort, BSS_INFO_UPDATE, etc).

The flag must still be set before napi_disable() to prevent reset_work from re-enabling NAPI and causing deadlock. Also guard mt792x_reset() to skip queuing work when device is removed.

With nothing associated it still costs 9 to 10 seconds, so a bare rmmod does reach this, just small enough there to read as normal teardown.

Fixes 98c13eb564e5 ("wifi: mt76: mt7925: Fix unregister deadlock")

---
v2: Update correct SHA in "Fixes" tag; reword commit message as
suggested by Devin Wittmayer.
v3: Update correct SHA in "Fixes" tag;

---
 drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 4 ++--
 drivers/net/wireless/mediatek/mt76/mt792x_mac.c | 3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/pci.c +2 -2
index 02ef09dd797d..93c823eb7501 100644
@@ -47,9 +47,10 @@ static void mt7925e_unregister_device(struct mt792x_dev *dev)
 	if (dev->phy.chip_cap & MT792x_CHIP_CAP_WF_RF_PIN_CTRL_EVT_EN)
 		wiphy_rfkill_stop_polling(hw->wiphy);
 
-	cancel_work_sync(&dev->reset_work);
 	cancel_work_sync(&dev->init_work);
 	mt76_unregister_device(&dev->mt76);
+	set_bit(MT76_REMOVED, &dev->mphy.state);
+	cancel_work_sync(&dev->reset_work);
 	mt76_for_each_q_rx(&dev->mt76, i)
 		napi_disable(&dev->mt76.napi[i]);
 	cancel_delayed_work_sync(&pm->ps_work);
@@ -725,7 +726,6 @@ static void mt7925_pci_remove(struct pci_dev *pdev)
 	struct mt76_dev *mdev = pci_get_drvdata(pdev);
 	struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76);
 
-	set_bit(MT76_REMOVED, &mdev->phy.state);
 	mt7925e_unregister_device(dev);
 	devm_free_irq(&pdev->dev, pdev->irq, dev);
 	mt76_free_device(&dev->mt76);
drivers/net/wireless/mediatek/mt76/mt792x_mac.c +3 -0
index 888e5a505673..1e20b333cc61 100644
@@ -278,6 +278,9 @@ void mt792x_reset(struct mt76_dev *mdev)
 	if (pm->suspended)
 		return;
 
+	if (test_bit(MT76_REMOVED, &mdev->phy.state))
+		return;
+
 	queue_work(dev->mt76.wq, &dev->reset_work);
 }
 EXPORT_SYMBOL_GPL(mt792x_reset);
Signature · 1 line
2.45.2