Skip to contentSkip to conversation

FAILED: patch "[PATCH] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before" failed to apply to 6.12-stable tree

PATCH New [email protected] 2 participants 2 messages Aug 20

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 0c0e418dbcf0582bf80d8dbfd9b306607c065992
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026082017-backspace-rectify-6ec7@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0c0e418dbcf0582bf80d8dbfd9b306607c065992 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <[email protected]>
Date: Thu, 30 Jul 2026 08:48:22 +0300
Subject: [PATCH] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before
widget setup

The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA.

On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes.

Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran.

For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer.

sound/soc/sof/ipc4-topology.c +33 -0
index 95ad5266b0c6..6fdfb667cce8 100644
@@ -3204,6 +3204,15 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 		ipc_size = ipc4_copier->ipc_config_size;
 		ipc_data = ipc4_copier->ipc_config_data;
 
+		/*
+		 * Refresh copier_data in ipc_config_data for host copiers.
+		 * The node_id may have been updated by host_config after
+		 * ipc_prepare, e.g. when host stream tags change after a
+		 * suspend/resume cycle.
+		 */
+		if (swidget->id != snd_soc_dapm_buffer)
+			memcpy(ipc_data, &ipc4_copier->data, sizeof(ipc4_copier->data));
+
 		msg = &ipc4_copier->msg;
 		break;
 	}
@@ -3212,6 +3221,9 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 	{
 		struct snd_sof_dai *dai = swidget->private;
 		struct sof_ipc4_copier *ipc4_copier = dai->private;
+		struct sof_ipc4_copier_data *copier_data;
+		u32 gtw_cfg_config_length;
+		u32 tlv_size;
 
 		pipeline = pipe_widget->private;
 		if (pipeline->use_chain_dma)
@@ -3220,6 +3232,27 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 		ipc_size = ipc4_copier->ipc_config_size;
 		ipc_data = ipc4_copier->ipc_config_data;
 
+		/*
+		 * Refresh copier_data and dma_config_tlv in ipc_config_data.
+		 * These may have been updated after ipc_prepare, e.g. when
+		 * link DMA stream tags change after a suspend/resume cycle.
+		 *
+		 * copier_data->gtw_cfg.config_length does not include the
+		 * TLV size (it was restored after sof_ipc4_prepare_copier_module),
+		 * so temporarily inflate it to match the ipc_config_data layout.
+		 */
+		copier_data = &ipc4_copier->data;
+		gtw_cfg_config_length = copier_data->gtw_cfg.config_length * 4;
+		tlv_size = ipc_size - sizeof(*copier_data) - gtw_cfg_config_length;
+
+		copier_data->gtw_cfg.config_length += tlv_size / 4;
+		memcpy(ipc_data, copier_data, sizeof(*copier_data));
+		copier_data->gtw_cfg.config_length = gtw_cfg_config_length / 4;
+
+		if (tlv_size)
+			memcpy(ipc_data + sizeof(*copier_data) + gtw_cfg_config_length,
+			       &ipc4_copier->dma_config_tlv, tlv_size);
+
 		msg = &ipc4_copier->msg;
 		break;
 	}
maintainer
#1 lore raw

PATCH 1/1 ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup

The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA.

On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes.

Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran.

For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer.

Fixes e9c6b118de1a ("ASoC: SOF: make dma_config_tlv be an array")
(cherry picked from commit 0c0e418dbcf0582bf80d8dbfd9b306607c065992)
---
 sound/soc/sof/ipc4-topology.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
sound/soc/sof/ipc4-topology.c +33 -0
index 1aba13a90973..fabd364d3316 100644
@@ -2654,6 +2654,15 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 		ipc_size = ipc4_copier->ipc_config_size;
 		ipc_data = ipc4_copier->ipc_config_data;
 
+		/*
+		 * Refresh copier_data in ipc_config_data for host copiers.
+		 * The node_id may have been updated by host_config after
+		 * ipc_prepare, e.g. when host stream tags change after a
+		 * suspend/resume cycle.
+		 */
+		if (swidget->id != snd_soc_dapm_buffer)
+			memcpy(ipc_data, &ipc4_copier->data, sizeof(ipc4_copier->data));
+
 		msg = &ipc4_copier->msg;
 		break;
 	}
@@ -2662,6 +2671,9 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 	{
 		struct snd_sof_dai *dai = swidget->private;
 		struct sof_ipc4_copier *ipc4_copier = dai->private;
+		struct sof_ipc4_copier_data *copier_data;
+		u32 gtw_cfg_config_length;
+		u32 tlv_size;
 
 		pipeline = pipe_widget->private;
 		if (pipeline->use_chain_dma)
@@ -2670,6 +2682,27 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 		ipc_size = ipc4_copier->ipc_config_size;
 		ipc_data = ipc4_copier->ipc_config_data;
 
+		/*
+		 * Refresh copier_data and dma_config_tlv in ipc_config_data.
+		 * These may have been updated after ipc_prepare, e.g. when
+		 * link DMA stream tags change after a suspend/resume cycle.
+		 *
+		 * copier_data->gtw_cfg.config_length does not include the
+		 * TLV size (it was restored after sof_ipc4_prepare_copier_module),
+		 * so temporarily inflate it to match the ipc_config_data layout.
+		 */
+		copier_data = &ipc4_copier->data;
+		gtw_cfg_config_length = copier_data->gtw_cfg.config_length * 4;
+		tlv_size = ipc_size - sizeof(*copier_data) - gtw_cfg_config_length;
+
+		copier_data->gtw_cfg.config_length += tlv_size / 4;
+		memcpy(ipc_data, copier_data, sizeof(*copier_data));
+		copier_data->gtw_cfg.config_length = gtw_cfg_config_length / 4;
+
+		if (tlv_size)
+			memcpy(ipc_data + sizeof(*copier_data) + gtw_cfg_config_length,
+			       &ipc4_copier->dma_config_tlv, tlv_size);
+
 		msg = &ipc4_copier->msg;
 		break;
 	}
Signature · 1 line
2.55.0