Skip to contentSkip to conversation

media: amlogic-c3: Fix out-of-bounds read of metering zone coordinates

PATCH New David Carlier 1 participant 1 message Aug 21

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 media: amlogic-c3: Fix out-of-bounds read of metering zone coordinates

The AWB, AE and AF coordinate loops bound themselves by max(horiz_zones_num, vert_zones_num) + 1. Both counts are u8 values taken verbatim from userspace, so the bound reaches 256 while the coordinate arrays hold 18 entries (AE, AF) or 33 (AWB). An AF block placed last in a full payload reads 474 bytes past the parameters buffer.

Clamp the point count to the array size, as the zone weight loops already do.

---
 drivers/media/platform/amlogic/c3/isp/c3-isp-params.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/media/platform/amlogic/c3/isp/c3-isp-params.c +6 -3
index ae0777a20bda..f2396e2c6640 100644
@@ -139,7 +139,8 @@ static void c3_isp_params_awb_cood(struct c3_isp_device *isp,
 	unsigned int max_point_num;
 
 	/* The number of points is one more than the number of edges */
-	max_point_num = max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1;
+	max_point_num = min(max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1,
+			    C3_ISP_AWB_MAX_PT_NUM);
 
 	/* Set the index address to 0 position */
 	c3_isp_write(isp, ISP_AWB_IDX_ADDR, 0);
@@ -258,7 +259,8 @@ static void c3_isp_params_ae_cood(struct c3_isp_device *isp,
 	unsigned int max_point_num;
 
 	/* The number of points is one more than the number of edges */
-	max_point_num = max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1;
+	max_point_num = min(max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1,
+			    C3_ISP_AE_MAX_PT_NUM);
 
 	/* Set the index address to 0 position */
 	c3_isp_write(isp, ISP_AE_IDX_ADDR, 0);
@@ -316,7 +318,8 @@ static void c3_isp_params_af_cood(struct c3_isp_device *isp,
 	unsigned int max_point_num;
 
 	/* The number of points is one more than the number of edges */
-	max_point_num = max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1;
+	max_point_num = min(max(cfg->horiz_zones_num, cfg->vert_zones_num) + 1,
+			    C3_ISP_AF_MAX_PT_NUM);
 
 	/* Set the index address to 0 position */
 	c3_isp_write(isp, ISP_AF_IDX_ADDR, 0);
Signature · 1 line
2.55.0