FAILED: patch "[PATCH] nilfs2: reject invalid block index in GC ioctl" failed to apply to 5.15-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a1735eae55448bc79c2da6593455791e886f6ed8
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026082454-grope-ground-b6d7@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a1735eae55448bc79c2da6593455791e886f6ed8 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <[email protected]>
Date: Fri, 3 Jul 2026 01:07:19 +0900
Subject: [PATCH] nilfs2: reject invalid block index in GC ioctl
Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers().
Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers.
As a preparatory step, the GC ioctl loads the page/folio of the block to be moved during GC and inserts it into the page cache based on information in the nilfs_vdesc structure passed as an argument. Normally, this does not cause issues because the user-space GC library configures the nilfs_vdesc structure properly. However, since there is no range check on the parameters determining the page index, a request with artificially crafted parameters -- such as those generated by Syzbot -- can result in a page/folio being inserted with a page index of ULONG_MAX, triggering the above problem.
This resolves the issue by checking the ranges of 'vd_offset' and 'vd_vblocknr' in the nilfs_vdesc structure that determine the page index, thereby preventing the invalid page/folio insertions.
fs/nilfs2/ioctl.c +18 -2
@@ -527,6 +527,7 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,* Return: 0 on success, or one of the following negative error codes on * failure: * * %-EEXIST - Block conflict detected. +* * %-EINVAL - Invalid virtual block descriptor. * * %-EIO - I/O error. * * %-ENOENT - Requested block doesn't exist. * * %-ENOMEM - Insufficient memory available.
@@ -536,15 +537,30 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, struct list_head *buffers) {struct buffer_head *bh; +__u64 limit_blkidx = (__u64 )inode->i_sb->s_maxbytes >> inode->i_blkbits;int ret; -if (vdesc->vd_flags ==0 ) +/* +* vblocknr 0 is reserved as an invalid pointer. Also, limit_blkidx +* ensures that the page index converted from vd_vblocknr never +* overflows the page cache limit and respects the architecture's bmap +* key width. +*/ +if (unlikely (vdesc->vd_vblocknr ==0 || + vdesc->vd_vblocknr >= limit_blkidx)) +return -EINVAL ; + +if (vdesc->vd_flags ==0 ) { +if (unlikely (vdesc->vd_offset >= limit_blkidx)) +return -EINVAL ; + ret =nilfs_gccache_submit_read_data ( inode, vdesc->vd_offset, vdesc->vd_blocknr, vdesc->vd_vblocknr, &bh); -else + }else { ret =nilfs_gccache_submit_read_node ( inode, vdesc->vd_blocknr, vdesc->vd_vblocknr, &bh); + }if (unlikely (ret <0 )) {if (ret == -ENOENT )
Sasha Levin
maintainerPATCH 1/2 nilfs2: correct return value kernel-doc descriptions for ioctl functions
From: Ryusuke Konishi <[email protected]>
[ Upstream commit 17c46a45cdb94c500f4e93b176cdd61931b03020 ]
Patch series "nilfs2: fix kernel-doc comments for function return values", v2.
This series fixes the inadequacies in the return value descriptions in nilfs2's kernel-doc comments (mainly incorrect formatting), as well as the lack of return value descriptions themselves, and fixes most of the remaining warnings that are output when the kernel-doc script is run with the "-Wall" option.
This patch (of 7):
In the kernel-doc comments for functions, there are many cases where the format of the return value description is inaccurate, such as "Return
Value: ...", which causes many warnings to be output when the kernel-doc script is executed with the "-Wall" option.
This fixes such incorrectly formatted return value descriptions for ioctl functions.
Stable-dep-of: a1735eae5544 ("nilfs2: reject invalid block index in GC ioctl")
--- fs/nilfs2/ioctl.c | 241 +++++++++++++++++++--------------------------- 1 file changed, 100 insertions(+), 141 deletions(-)
fs/nilfs2/ioctl.c +100 -141
@@ -32,17 +32,14 @@* @dofunc: concrete function of get/set metadata info * * Description: nilfs_ioctl_wrap_copy() gets/sets metadata info by means of -* calling dofunc() function on the basis of @argv argument. -* -* Return Value: On success, 0 is returned and requested metadata info -* is copied into userspace. On error, one of the following -* negative error codes is returned. -* -* %-EINVAL - Invalid arguments from userspace. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EFAULT - Failure during execution of requested operation. +* calling dofunc() function on the basis of @argv argument. If successful, +* the requested metadata information is copied to userspace memory. +* +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during execution of requested operation. +* * %-EINVAL - Invalid arguments from userspace. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_wrap_copy(struct the_nilfs *nilfs, struct nilfs_argv *argv, int dir,
@@ -176,13 +173,10 @@ static int nilfs_ioctl_getversion(struct inode *inode, void __user *argp)* given checkpoint between checkpoint and snapshot state. This ioctl * is used in chcp and mkcp utilities. * -* Return Value: On success, 0 is returned and mode of a checkpoint is -* changed. On error, one of the following negative error codes -* is returned. -* -* %-EPERM - Operation not permitted. -* -* %-EFAULT - Failure during checkpoint mode changing. +* Return: 0 on success, or one of the following negative error codes on +* failure: +* %-EFAULT - Failure during checkpoint mode changing. +* %-EPERM - Operation not permitted. */ static int nilfs_ioctl_change_cpmode (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -230,13 +224,10 @@ static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp,* checkpoint from NILFS2 file system. This ioctl is used in rmcp * utility. * -* Return Value: On success, 0 is returned and a checkpoint is -* removed. On error, one of the following negative error codes -* is returned. -* -* %-EPERM - Operation not permitted. -* -* %-EFAULT - Failure during checkpoint removing. +* Return: 0 on success, or one of the following negative error codes on +* failure: +* %-EFAULT - Failure during checkpoint removing. +* %-EPERM - Operation not permitted. */ static int nilfs_ioctl_delete_checkpoint(struct inode *inode, struct file *filp,
@@ -282,7 +273,7 @@ nilfs_ioctl_delete_checkpoint(struct inode *inode, struct file *filp,* requested checkpoints. The NILFS_IOCTL_GET_CPINFO ioctl is used in * lscp utility and by nilfs_cleanerd daemon. * -* Return value: count of nilfs_cpinfo structures in output buffer. +* Return: Count of nilfs_cpinfo structures in output buffer. */ static ssize_t nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
@@ -306,17 +297,14 @@ nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,* * Description: nilfs_ioctl_get_cpstat() returns information about checkpoints. * The NILFS_IOCTL_GET_CPSTAT ioctl is used by lscp, rmcp utilities -* and by nilfs_cleanerd daemon. -* -* Return Value: On success, 0 is returned, and checkpoints information is -* copied into userspace pointer @argp. On error, one of the following -* negative error codes is returned. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EFAULT - Failure during getting checkpoints statistics. +* and by nilfs_cleanerd daemon. The checkpoint statistics are copied to +* the userspace memory pointed to by @argp. +* +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during getting checkpoints statistics. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_get_cpstat (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -349,7 +337,8 @@ static int nilfs_ioctl_get_cpstat(struct inode *inode, struct file *filp,* info about requested segments. The NILFS_IOCTL_GET_SUINFO ioctl is used * in lssu, nilfs_resize utilities and by nilfs_cleanerd daemon. * -* Return value: count of nilfs_suinfo structures in output buffer. +* Return: Count of nilfs_suinfo structures in output buffer on success, +* or a negative error code on failure. */ static ssize_t nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
@@ -373,17 +362,14 @@ nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,* * Description: nilfs_ioctl_get_sustat() returns segment usage statistics. * The NILFS_IOCTL_GET_SUSTAT ioctl is used in lssu, nilfs_resize utilities -* and by nilfs_cleanerd daemon. -* -* Return Value: On success, 0 is returned, and segment usage information is -* copied into userspace pointer @argp. On error, one of the following -* negative error codes is returned. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EFAULT - Failure during getting segment usage statistics. +* and by nilfs_cleanerd daemon. The requested segment usage information is +* copied to the userspace memory pointed to by @argp. +* +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during getting segment usage statistics. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_get_sustat (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -416,7 +402,8 @@ static int nilfs_ioctl_get_sustat(struct inode *inode, struct file *filp,* on virtual block addresses. The NILFS_IOCTL_GET_VINFO ioctl is used * by nilfs_cleanerd daemon. * -* Return value: count of nilfs_vinfo structures in output buffer. +* Return: Count of nilfs_vinfo structures in output buffer on success, or +* a negative error code on failure. */ static ssize_t nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
@@ -443,7 +430,8 @@ nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,* about descriptors of disk block numbers. The NILFS_IOCTL_GET_BDESCS ioctl * is used by nilfs_cleanerd daemon. * -* Return value: count of nilfs_bdescs structures in output buffer. +* Return: Count of nilfs_bdescs structures in output buffer on success, or +* a negative error code on failure. */ static ssize_t nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags,
@@ -480,19 +468,15 @@ nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags,* * Description: nilfs_ioctl_do_get_bdescs() function returns information * about descriptors of disk block numbers. The NILFS_IOCTL_GET_BDESCS ioctl -* is used by nilfs_cleanerd daemon. -* -* Return Value: On success, 0 is returned, and disk block descriptors are -* copied into userspace pointer @argp. On error, one of the following -* negative error codes is returned. -* -* %-EINVAL - Invalid arguments from userspace. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EFAULT - Failure during getting disk block descriptors. +* is used by nilfs_cleanerd daemon. If successful, disk block descriptors +* are copied to userspace pointer @argp. +* +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during getting disk block descriptors. +* * %-EINVAL - Invalid arguments from userspace. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_get_bdescs (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -526,16 +510,12 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,* Description: nilfs_ioctl_move_inode_block() function registers data/node * buffer in the GC pagecache and submit read request. * -* Return Value: On success, 0 is returned. On error, one of the following -* negative error codes is returned. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-ENOENT - Requested block doesn't exist. -* -* %-EEXIST - Blocks conflict is detected. +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EEXIST - Block conflict detected. +* * %-EIO - I/O error. +* * %-ENOENT - Requested block doesn't exist. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_move_inode_block(struct inode *inode, struct nilfs_vdesc *vdesc,
@@ -590,8 +570,8 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode,* blocks that garbage collector specified with the array of nilfs_vdesc * structures and stores them into page caches of GC inodes. * -* Return Value: Number of processed nilfs_vdesc structures or -* error code, otherwise. +* Return: Number of processed nilfs_vdesc structures on success, or +* a negative error code on failure. */ static int nilfs_ioctl_move_blocks (struct super_block *sb,struct nilfs_argv *argv,void *buf)
@@ -668,14 +648,11 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb,* in the period from p_start to p_end, excluding p_end itself. The checkpoints * which have been already deleted are ignored. * -* Return Value: Number of processed nilfs_period structures or -* error code, otherwise. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EINVAL - invalid checkpoints. +* Return: Number of processed nilfs_period structures on success, or one of +* the following negative error codes on failure: +* * %-EINVAL - invalid checkpoints. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_delete_checkpoints (struct the_nilfs *nilfs,struct nilfs_argv *argv,void *buf)
@@ -703,14 +680,11 @@ static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,* Description: nilfs_ioctl_free_vblocknrs() function frees * the virtual block numbers specified by @buf and @argv->v_nmembs. * -* Return Value: Number of processed virtual block numbers or -* error code, otherwise. -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-ENOENT - The virtual block number have not been allocated. +* Return: Number of processed virtual block numbers on success, or one of the +* following negative error codes on failure: +* * %-EIO - I/O error. +* * %-ENOENT - Unallocated virtual block number. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_free_vblocknrs (struct the_nilfs *nilfs,struct nilfs_argv *argv,void *buf)
@@ -732,14 +706,11 @@ static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,* Description: nilfs_ioctl_mark_blocks_dirty() function marks * metadata file or data blocks as dirty. * -* Return Value: Number of processed block descriptors or -* error code, otherwise. -* -* %-ENOMEM - Insufficient memory available. -* -* %-EIO - I/O error -* -* %-ENOENT - the specified block does not exist (hole block) +* Return: Number of processed block descriptors on success, or one of the +* following negative error codes on failure: +* * %-EIO - I/O error. +* * %-ENOENT - Non-existent block (hole block). +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_mark_blocks_dirty (struct the_nilfs *nilfs,struct nilfs_argv *argv,void *buf)
@@ -844,7 +815,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,* from userspace. The NILFS_IOCTL_CLEAN_SEGMENTS ioctl is used by * nilfs_cleanerd daemon. * -* Return Value: On success, 0 is returned or error code, otherwise. +* Return: 0 on success, or a negative error code on failure. */ static int nilfs_ioctl_clean_segments (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -970,20 +941,14 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,* and metadata are written out to the device when it successfully * returned. * -* Return Value: On success, 0 is retured. On errors, one of the following -* negative error code is returned. -* -* %-EROFS - Read only filesystem. -* -* %-EIO - I/O error -* -* %-ENOSPC - No space left on device (only in a panic state). -* -* %-ERESTARTSYS - Interrupted. -* -* %-ENOMEM - Insufficient memory available. -* -* %-EFAULT - Failure during execution of requested operation. +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during execution of requested operation. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. +* * %-ENOSPC - No space left on device (only in a panic state). +* * %-ERESTARTSYS - Interrupted. +* * %-EROFS - Read only filesystem. */ static int nilfs_ioctl_sync (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
@@ -1017,7 +982,7 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,* @filp: file object * @argp: pointer on argument from userspace * -* Return Value: On success, 0 is returned or error code, otherwise. +* Return: 0 on success, or a negative error code on failure. */ static int nilfs_ioctl_resize (struct inode *inode,struct file *filp,void __user *argp)
@@ -1053,7 +1018,7 @@ static int nilfs_ioctl_resize(struct inode *inode, struct file *filp,* checks the arguments from userspace and calls nilfs_sufile_trim_fs, which * performs the actual trim operation. * -* Return Value: On success, 0 is returned or negative error code, otherwise. +* Return: 0 on success, or a negative error code on failure. */ static int nilfs_ioctl_trim_fs (struct inode *inode,void __user *argp) {
@@ -1095,7 +1060,7 @@ static int nilfs_ioctl_trim_fs(struct inode *inode, void __user *argp)* of segments in bytes and upper limit of segments in bytes. * The NILFS_IOCTL_SET_ALLOC_RANGE is used by nilfs_resize utility. * -* Return Value: On success, 0 is returned or error code, otherwise. +* Return: 0 on success, or a negative error code on failure. */ static int nilfs_ioctl_set_alloc_range (struct inode *inode,void __user *argp) {
@@ -1146,17 +1111,15 @@ static int nilfs_ioctl_set_alloc_range(struct inode *inode, void __user *argp)* @dofunc: concrete function of getting metadata info * * Description: nilfs_ioctl_get_info() gets metadata info by means of -* calling dofunc() function. -* -* Return Value: On success, 0 is returned and requested metadata info -* is copied into userspace. On error, one of the following -* negative error codes is returned. -* -* %-EINVAL - Invalid arguments from userspace. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EFAULT - Failure during execution of requested operation. +* calling dofunc() function. The requested metadata information is copied +* to userspace memory @argp. +* +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EFAULT - Failure during execution of requested operation. +* * %-EINVAL - Invalid arguments from userspace. +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. */ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp,
@@ -1196,18 +1159,14 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,* encapsulated in nilfs_argv and updates the segment usage info * according to the flags in nilfs_suinfo_update. * -* Return Value: On success, 0 is returned. On error, one of the -* following negative error codes is returned. -* -* %-EPERM - Not enough permissions -* -* %-EFAULT - Error copying input data -* -* %-EIO - I/O error. -* -* %-ENOMEM - Insufficient amount of memory available. -* -* %-EINVAL - Invalid values in input (segment number, flags or nblocks) +* Return: 0 on success, or one of the following negative error codes on +* failure: +* * %-EEXIST - Block conflict detected. +* * %-EFAULT - Error copying input data. +* * %-EINVAL - Invalid values in input (segment number, flags or nblocks). +* * %-EIO - I/O error. +* * %-ENOMEM - Insufficient memory available. +* * %-EPERM - Not enough permissions. */ static int nilfs_ioctl_set_suinfo (struct inode *inode,struct file *filp,unsigned int cmd,void __user *argp)
Signature · 1 line
2.53.0
Sasha Levin
maintainerPATCH 2/2 nilfs2: reject invalid block index in GC ioctl
From: Ryusuke Konishi <[email protected]>
[ Upstream commit a1735eae55448bc79c2da6593455791e886f6ed8 ]
Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers().
Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers.
As a preparatory step, the GC ioctl loads the page/folio of the block to be moved during GC and inserts it into the page cache based on information in the nilfs_vdesc structure passed as an argument. Normally, this does not cause issues because the user-space GC library configures the nilfs_vdesc structure properly. However, since there is no range check on the parameters determining the page index, a request with artificially crafted parameters -- such as those generated by Syzbot -- can result in a page/folio being inserted with a page index of ULONG_MAX, triggering the above problem.
This resolves the issue by checking the ranges of 'vd_offset' and 'vd_vblocknr' in the nilfs_vdesc structure that determine the page index, thereby preventing the invalid page/folio insertions.
--- fs/nilfs2/ioctl.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
fs/nilfs2/ioctl.c +18 -2
@@ -513,6 +513,7 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,* Return: 0 on success, or one of the following negative error codes on * failure: * * %-EEXIST - Block conflict detected. +* * %-EINVAL - Invalid virtual block descriptor. * * %-EIO - I/O error. * * %-ENOENT - Requested block doesn't exist. * * %-ENOMEM - Insufficient memory available.
@@ -522,15 +523,30 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, struct list_head *buffers) {struct buffer_head *bh; +__u64 limit_blkidx = (__u64 )inode->i_sb->s_maxbytes >> inode->i_blkbits;int ret; -if (vdesc->vd_flags ==0 ) +/* +* vblocknr 0 is reserved as an invalid pointer. Also, limit_blkidx +* ensures that the page index converted from vd_vblocknr never +* overflows the page cache limit and respects the architecture's bmap +* key width. +*/ +if (unlikely (vdesc->vd_vblocknr ==0 || + vdesc->vd_vblocknr >= limit_blkidx)) +return -EINVAL ; + +if (vdesc->vd_flags ==0 ) { +if (unlikely (vdesc->vd_offset >= limit_blkidx)) +return -EINVAL ; + ret =nilfs_gccache_submit_read_data ( inode, vdesc->vd_offset, vdesc->vd_blocknr, vdesc->vd_vblocknr, &bh); -else + }else { ret =nilfs_gccache_submit_read_node ( inode, vdesc->vd_blocknr, vdesc->vd_vblocknr, &bh); + }if (unlikely (ret <0 )) {if (ret == -ENOENT )
Signature · 1 line
2.53.0