Skip to contentSkip to conversation

drm/amd/ras: report how far a CPER record query got

PATCH In review Xiang Liu 2 participants 3 messages Aug 26 – Aug 27

Subsystems (2)
lore
Share & tools
lore

Xiang Liu

author
#0 lore raw

PATCH 1/2 drm/amd/ras: report how far a CPER record query got

The caller walks the log with cper_start_id and resumes at cper_start_id + real_cper_num, but the reply only counts the ids that held a record. A batch id that holds nothing therefore never moves the caller forward, and every such id makes it read the next populated batch one more time. Count the ids covered instead.

The rewind to the last populated batch when the query starts at the end has the same effect once the caller has drained the log, and the latest id is already reported by the snapshot query, so drop it.

---
 drivers/gpu/drm/amd/ras/core/cmd.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/ras/core/cmd.c +7 -5
index 66bd62a819b2..9f874800f38d 100644
@@ -206,7 +206,7 @@ static int ras_cmd_get_cper_records(struct ras_core_context *ras_core,
 	uint32_t offset = 0, real_data_len = 0;
 	u64 batch_id, start_batch_id;
 	uint8_t *buf_ptr = (uint8_t *)(uintptr_t)req->buf_ptr;
-	int ret = 0, i, count, valid_batch_count = 0;
+	int ret = 0, i, count, read_batch_count = 0;
 
 	if ((cmd->input_size != sizeof(struct ras_cmd_cper_record_req)) ||
 		(cmd->output_buf_size < sizeof(*rsp)))
@@ -225,8 +225,6 @@ static int ras_cmd_get_cper_records(struct ras_core_context *ras_core,
 	ras_log_ring_get_batch_overview(ras_core, &overview);
 
 	start_batch_id = req->cper_start_id;
-	if (overview.logged_batch_count && start_batch_id == overview.last_batch_id)
-		start_batch_id = overview.last_batch_id - 1;
 
 	for (i = 0; i < req->cper_num; i++) {
 		batch_id = start_batch_id + i;
@@ -246,9 +244,13 @@ static int ras_cmd_get_cper_records(struct ras_core_context *ras_core,
 			if (ret)
 				break;
 
-			valid_batch_count++;
 			offset += real_data_len;
 		}
+
+		/* The caller resumes at cper_start_id + real_cper_num, so an id
+		 * that held nothing still has to be counted here.
+		 */
+		read_batch_count++;
 	}
 
 	if ((ret && (ret != -ENOMEM))) {
@@ -257,7 +259,7 @@ static int ras_cmd_get_cper_records(struct ras_core_context *ras_core,
 	}
 
 	rsp->real_data_size = offset;
-	rsp->real_cper_num = valid_batch_count;
+	rsp->real_cper_num = read_batch_count;
 	rsp->remain_num = (ret == -ENOMEM) ? (req->cper_num - i) : 0;
 	rsp->version = 0;
 
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH 2/2 drm/amd/ras: take a log batch id only once there is something to log

The id is claimed before the banks are read, so a poll that ends up logging nothing still burns one and leaves a gap that every reader of the log then has to walk over. Claim it when the first record of the batch is about to go in.

---
 drivers/gpu/drm/amd/ras/core/aca.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/ras/core/aca.c +4 -4
index 881681ea9f3f..4289e968d331 100644
@@ -394,10 +394,6 @@ static int aca_banks_update(struct ras_core_context *ras_core,
 	if (!count)
 		goto out;
 
-	/* Only one MCE error is logged for each batch */
-	if (ecc_type != RAS_ERR_TYPE__MCE)
-		batch_tag = ras_log_ring_create_batch_tag(ras_core);
-
 	for (i = 0; i < count; i++) {
 		memset(&bank, 0, sizeof(bank));
 		ret = aca_dump_bank(ras_core, ecc_type, i, &bank);
@@ -420,6 +416,10 @@ static int aca_banks_update(struct ras_core_context *ras_core,
 
 		bank.seq_no = aca_get_bank_seqno(ras_core, ecc_type, aca_blk, &bank_ecc);
 
+		/* Only one MCE error is logged for each batch */
+		if (ecc_type != RAS_ERR_TYPE__MCE && !batch_tag)
+			batch_tag = ras_log_ring_create_batch_tag(ras_core);
+
 		aca_log_bank_data(ras_core, &bank, &bank_ecc, batch_tag);
 		aca_bank_log(ras_core, i, count, &bank, &bank_ecc);
 
Signature · 1 line
2.34.1
Reviewed-by on v1 2/2
#2 lore raw

RE: [PATCH 2/2] drm/amd/ras: take a log batch id only once there is something to log

AMD General

Series is

Regards,
Hawking
-----Original Message-----
From: Liu, Xiang(Dean) <[email protected]>
Sent: Wednesday, August 26, 2026 6:28 PM
To: [email protected]
Cc: Zhang, Hawking <[email protected]>; Zhou1, Tao <[email protected]>; Yang, Stanley <[email protected]>; Chai, Thomas <[email protected]>; Liu, Xiang(Dean) <[email protected]>
Subject: [PATCH 2/2] drm/amd/ras: take a log batch id only once there is something to log

The id is claimed before the banks are read, so a poll that ends up logging nothing still burns one and leaves a gap that every reader of the log then has to walk over. Claim it when the first record of the batch is about to go in.

---
 drivers/gpu/drm/amd/ras/core/aca.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/ras/core/aca.c +0 -4
index 881681ea9f3f..4289e968d331 100644
@@ -394,10 +394,6 @@ static int aca_banks_update(struct ras_core_context *ras_core,
        if (!count)
                goto out;
 
-       /* Only one MCE error is logged for each batch */
-       if (ecc_type != RAS_ERR_TYPE__MCE)
-               batch_tag = ras_log_ring_create_batch_tag(ras_core);
-
        for (i = 0; i < count; i++) {
                memset(&bank, 0, sizeof(bank));
                ret = aca_dump_bank(ras_core, ecc_type, i, &bank); @@ -420,6 +416,10 @@ static int aca_banks_update(struct ras_core_context *ras_core,
                bank.seq_no = aca_get_bank_seqno(ras_core, ecc_type, aca_blk, &bank_ecc);

+ /* Only one MCE error is logged for each batch */
+ if (ecc_type != RAS_ERR_TYPE__MCE && !batch_tag)
+ batch_tag = ras_log_ring_create_batch_tag(ras_core);
+

                aca_log_bank_data(ras_core, &bank, &bank_ecc, batch_tag);
                aca_bank_log(ras_core, i, count, &bank, &bank_ecc);

--
2.34.1