ARM: dts: helios4: drop unused phy0 pin group
Subsystems (2)
PATCH 1/1 ARM: dts: helios4: drop unused phy0 pin group
The microsom_phy0_int_pins group muxes mpp18 to gpio, but nothing references it: no PHY interrupt, GPIO user or consumer pins it in, and the sibling ClearFog board does not define it either. It has been dead config since the board file was first added, so drop it.
Assisted-by opencode:big-pickle
Signed-off-by Rosen Penev <[email protected]>
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 4 ---- 1 file changed, 4 deletions(-)
arch/arm/boot/dts/marvell/armada-388-helios4.dts +0 -4
@@ -284,10 +284,6 @@ pca0_pins: pca0-pins { marvell,pins = "mpp23"; marvell,function = "gpio"; }; - microsom_phy0_int_pins: microsom-phy0-int-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; helios_i2c1_pins: i2c1-pins { marvell,pins = "mpp26", "mpp27"; marvell,function = "i2c1";
Signature · 1 line
2.55.0
Quoted 5 lines · Rosen Penev
The
microsom_phy0_int_pinsgroup muxes mpp18 to gpio, but nothing references it: no PHY interrupt, GPIO user or consumer pins it in, and the sibling ClearFog board does not define it either. It has been dead config since the board file was first added, so drop it.
This is wrong. I have a separate patch that uses it.
Quoted 25 lines
Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 4 ---- 1 file changed, 4 deletions(-)arch/arm/boot/dts/marvell/armada-388-helios4.dts +0
-5@@ -284,10 +284,6 @@ pca0_pins: pca0-pins { marvell,pins = "mpp23"; marvell,function = "gpio"; }; - microsom_phy0_int_pins: microsom-phy0-int-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; helios_i2c1_pins: i2c1-pins { marvell,pins = "mpp26", "mpp27"; marvell,function = "i2c1"; --2.55.0