media: ipu-bridge: Add upside-down sensor DMI quirk for Samsung Galaxy Book3 Ultra
PATCH 1/1 media: ipu-bridge: Add upside-down sensor DMI quirk for Samsung Galaxy Book3 Ultra
On the Samsung Galaxy Book3 Ultra (960XFH) the OV02C10 sensor is mounted upside-down. The 180 degree rotation is not described in the sensor's ACPI data: both the SSDB and the _PLD report a rotation of 0 degrees, so ipu_bridge_parse_rotation() assigns a "rotation" property of 0 to the sensor fwnode and the image is rendered upside-down in userspace.
Because the SSDB degree field holds the valid value 0, the flipped mounting goes unnoticed: the driver logs no warning and userspace (e.g. libcamera) has no way to correct the image.
Add a DMI quirk entry for this laptop so that the sensor fwnode gets a "rotation" property of 180 and userspace (e.g. libcamera) can compensate.
Tested on the Galaxy Book3 Ultra: with the sensor reporting V4L2_CID_CAMERA_SENSOR_ROTATION = 180 (verified with an equivalent local sensor-driver quirk), libcamera renders the image upright.
--- drivers/media/pci/intel/ipu-bridge.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/media/pci/intel/ipu-bridge.c +8 -0
@@ -192,6 +192,14 @@ static const struct dmi_system_id upside_down_sensor_dmi_ids[] = { }, .driver_data = "OVTI02E1", }, + { + /* Samsung Galaxy Book3 Ultra */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "960XFH"), + }, + .driver_data = "OVTI02C1", + }, {} /* Terminating entry */ };
Signature · 1 line
2.55.0