Skip to contentSkip to conversation

ASoC: codecs: fix typos in comments

PATCH Superseded Hemanth Selam 2 participants 2 messages Sep 8

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ASoC: codecs: fix typos in comments

Fix typos in comments, reported by scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Only touches comments, no code changes.

Assisted-by Cursor:claude-opus-5

---

Changes since v2:
- sent on its own instead of as part of a cirrus series. Mark Brown asked for patches touching different subsystems not to be grouped into one series when there is no dependency between them.

 sound/soc/codecs/wm8962.c  | 4 ++--
 sound/soc/codecs/wm8996.c  | 2 +-
 sound/soc/codecs/wm_hubs.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
sound/soc/codecs/wm8962.c +2 -2
index 8a9598161b35..af4716051220 100644
@@ -3430,7 +3430,7 @@ static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset)
 
 	/* The WM8962 GPIOs aren't linearly numbered.  For simplicity
 	 * we export linear numbers and error out if the unsupported
-	 * ones are requsted.
+	 * ones are requested.
 	 */
 	switch (offset + 1) {
 	case 2:
@@ -3813,7 +3813,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c)
 	regmap_update_bits(wm8962->regmap, WM8962_EQ1,
 			   WM8962_EQ_SHARED_COEFF, 0);
 
-	/* Don't debouce interrupts so we don't need SYSCLK */
+	/* Don't debounce interrupts so we don't need SYSCLK */
 	regmap_update_bits(wm8962->regmap, WM8962_IRQ_DEBOUNCE,
 			   WM8962_FLL_LOCK_DB | WM8962_PLL3_LOCK_DB |
 			   WM8962_PLL2_LOCK_DB | WM8962_TEMP_SHUT_DB,
sound/soc/codecs/wm8996.c +1 -1
index dface555f928..e7a20ce39940 100644
@@ -2106,7 +2106,7 @@ static int wm8996_set_fll(struct snd_soc_component *component, int fll_id, int s
 	if (i2c->irq)
 		timeout *= 10;
 	else
-		/* ensure timeout of atleast 1 jiffies */
+		/* ensure timeout of at least 1 jiffies */
 		timeout = (timeout/2) ? : 1;
 
 	for (retry = 0; retry < 10; retry++) {
sound/soc/codecs/wm_hubs.c +1 -1
index f80dfc488e3c..019940589e51 100644
@@ -338,7 +338,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
 	ret = snd_soc_put_volsw(kcontrol, ucontrol);
 
 	/* If we're applying an offset correction then updating the
-	 * callibration would be likely to introduce further offsets. */
+	 * calibration would be likely to introduce further offsets. */
 	if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update)
 		return ret;
 
Signature · 1 line
2.48.1
maintainer
#1 lore raw
Quoted 3 lines · Hemanth Selam

Fix typos in comments, reported by scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Only touches comments, no code changes.

This doesn't apply against current code, please check and resend.