FAILED: patch "[PATCH] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started" failed to apply to 6.12-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x f7e46ebffc5781aab3f1f5a5d4350addbb5833f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026090921-fester-word-0fdf@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f7e46ebffc5781aab3f1f5a5d4350addbb5833f4 Mon Sep 17 00:00:00 2001
From: Nilesh Javali <[email protected]>
Date: Thu, 30 Jul 2026 21:28:30 +0530
Subject: [PATCH] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt().
drivers/scsi/qla2xxx/qla_nvme.c +13 -6
@@ -441,9 +441,11 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport, a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; -spin_lock_irqsave (ha->base_qpair->qp_lock_ptr, flags); -qla_nvme_ls_reject_iocb (vha, ha->base_qpair, &a, true); -spin_unlock_irqrestore (ha->base_qpair->qp_lock_ptr, flags); +if (ha->flags.fw_started) { +spin_lock_irqsave (ha->base_qpair->qp_lock_ptr, flags); +qla_nvme_ls_reject_iocb (vha, ha->base_qpair, &a, true); +spin_unlock_irqrestore (ha->base_qpair->qp_lock_ptr, flags); + }kfree (uctx);return rval; }
@@ -1321,9 +1323,14 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item) a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; -spin_lock_irqsave (vha->hw->base_qpair->qp_lock_ptr, flags); -qla_nvme_ls_reject_iocb (vha, vha->hw->base_qpair, &a, true); -spin_unlock_irqrestore (vha->hw->base_qpair->qp_lock_ptr, flags); +if (vha->hw->flags.fw_started) { +spin_lock_irqsave (vha->hw->base_qpair->qp_lock_ptr, + flags); +qla_nvme_ls_reject_iocb (vha, vha->hw->base_qpair, &a, + true); +spin_unlock_irqrestore (vha->hw->base_qpair->qp_lock_ptr, + flags); + }list_del (&uctx->elem);kfree (uctx); }
Sasha Levin
maintainerPATCH 1/2 scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject
From: Nilesh Javali <[email protected]>
[ Upstream commit f743488e4a203049f27ec5d8cd0caccc483af01e ]
qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held:
- qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and
- qla2xxx_process_purls_pkt(), run from the purex work/DPC context.
Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can run concurrently with normal I/O submission on the base ring and corrupt the ring producer state, leading to duplicated or dropped commands. The third caller, qla2xxx_process_purls_iocb(), runs inside qla24xx_process_response_queue() with the qpair lock already held and is safe; that is also why the lock cannot be taken inside the helper itself (it would recursively re-acquire hardware_lock on the response path).
Take qp_lock_ptr around the two unlocked callers and document the helper as caller-locked. Both run in process context, so spin_lock_irqsave() is used and nothing in the locked region sleeps.
Stable-dep-of: f7e46ebffc57 ("scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started")
--- drivers/scsi/qla2xxx/qla_nvme.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/scsi/qla2xxx/qla_nvme.c +10 -0
@@ -374,6 +374,7 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,srb_t *sp;int rval =QLA_FUNCTION_FAILED ;uint8_t cnt =0 ; +unsigned long flags;if (!fcport || fcport->deleted) goto out;
@@ -440,7 +441,9 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport, a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; +spin_lock_irqsave (ha->base_qpair->qp_lock_ptr, flags);qla_nvme_ls_reject_iocb (vha, ha->base_qpair, &a, true); +spin_unlock_irqrestore (ha->base_qpair->qp_lock_ptr, flags);kfree (uctx);return rval; }
@@ -1127,6 +1130,10 @@ static void qla_nvme_lsrjt_pt_iocb(struct scsi_qla_host *vha, lsrjt_iocb->rx_byte_count =0 ; } +/* +* Allocates from and advances the request ring, so the caller must hold +* qp->qp_lock_ptr (the response-queue caller already holds it). +*/ static int qla_nvme_ls_reject_iocb (struct scsi_qla_host *vha,struct qla_qpair *qp,struct qla_nvme_lsrjt_pt_arg *a,bool is_xchg_terminate)
@@ -1183,6 +1190,7 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item) {struct qla_nvme_unsol_ctx *uctx = item->purls_context;struct qla_nvme_lsrjt_pt_arg a; +unsigned long flags;int ret =1 ;#if (IS_ENABLED (CONFIG_NVME_FC ))
@@ -1195,7 +1203,9 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item) a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; +spin_lock_irqsave (vha->hw->base_qpair->qp_lock_ptr, flags);qla_nvme_ls_reject_iocb (vha, vha->hw->base_qpair, &a, true); +spin_unlock_irqrestore (vha->hw->base_qpair->qp_lock_ptr, flags);list_del (&uctx->elem);kfree (uctx); }
Signature · 1 line
2.53.0
Sasha Levin
maintainerPATCH 2/2 scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
From: Nilesh Javali <[email protected]>
[ Upstream commit f7e46ebffc5781aab3f1f5a5d4350addbb5833f4 ]
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt().
--- drivers/scsi/qla2xxx/qla_nvme.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/scsi/qla2xxx/qla_nvme.c +13 -6
@@ -441,9 +441,11 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport, a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; -spin_lock_irqsave (ha->base_qpair->qp_lock_ptr, flags); -qla_nvme_ls_reject_iocb (vha, ha->base_qpair, &a, true); -spin_unlock_irqrestore (ha->base_qpair->qp_lock_ptr, flags); +if (ha->flags.fw_started) { +spin_lock_irqsave (ha->base_qpair->qp_lock_ptr, flags); +qla_nvme_ls_reject_iocb (vha, ha->base_qpair, &a, true); +spin_unlock_irqrestore (ha->base_qpair->qp_lock_ptr, flags); + }kfree (uctx);return rval; }
@@ -1203,9 +1205,14 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item) a.vp_idx = vha->vp_idx; a.nport_handle = uctx->nport_handle; a.xchg_address = uctx->exchange_address; -spin_lock_irqsave (vha->hw->base_qpair->qp_lock_ptr, flags); -qla_nvme_ls_reject_iocb (vha, vha->hw->base_qpair, &a, true); -spin_unlock_irqrestore (vha->hw->base_qpair->qp_lock_ptr, flags); +if (vha->hw->flags.fw_started) { +spin_lock_irqsave (vha->hw->base_qpair->qp_lock_ptr, + flags); +qla_nvme_ls_reject_iocb (vha, vha->hw->base_qpair, &a, + true); +spin_unlock_irqrestore (vha->hw->base_qpair->qp_lock_ptr, + flags); + }list_del (&uctx->elem);kfree (uctx); }
Signature · 1 line
2.53.0