patch "iio: health: max30102: fix NULL dereference in interrupt handler" added to char-misc-linus
Subsystems (2)
This is a note to let you know that I've just added the patch titled
iio: health: max30102: fix NULL dereference in interrupt handler
to my char-misc git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From f0ea4824deebf21dacfbe397c4b0a5fd3e745a8d Mon Sep 17 00:00:00 2001
From: Marco Chen <[email protected]>
Date: Sat, 8 Aug 2026 15:54:50 -0400
Subject: iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled for the lifetime of the device, but indio_dev->active_scan_mask is only valid while a buffer is enabled. When an interrupt arrives while no buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __bitmap_weight+0x64/0x98 (P) max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handler and return early unless it reports a FIFO sample is ready. Because FIFO_RDY is the only interrupt source enabled in max30102_chip_init(), an invocation of max30102_interrupt_handler() without the FIFO_RDY interrupt status bit set carries no data to read and can return before touching active_scan_mask. A negative return from max30102_fifo_count() indicates a failed interrupt status read and is treated the same way.
--- drivers/iio/health/max30102.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/iio/health/max30102.c +9 -3
@@ -290,9 +290,15 @@ static irqreturn_t max30102_interrupt_handler(int irq, void *private) {struct iio_dev *indio_dev = private;struct max30102_data *data =iio_priv (indio_dev); -unsigned int measurements =bitmap_weight (indio_dev->active_scan_mask, -iio_get_masklength (indio_dev)); -int ret, cnt =0 ; +unsigned int measurements; +int ret, cnt; + + cnt =max30102_fifo_count (data); +if (cnt <=0 ) +return IRQ_HANDLED ; + + measurements =bitmap_weight (indio_dev->active_scan_mask, +iio_get_masklength (indio_dev));mutex_lock (&data->lock);
Signature · 1 line
2.55.0