Skip to contentSkip to conversation

Bluetooth: btintel_pcie: validate device-supplied DMA indices

PATCH Applied Ravindra 3 participants 3 messages Sep 15 – Sep 21 Bluetooth drivers

lore
Share & tools
lore

Ravindra

author
#0 lore raw

PATCH 1/1 Bluetooth: btintel_pcie: validate device-supplied DMA indices

In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer.

Additionally, cr_hia is read from a DMA-shared index array also writable by the device; if the device sets cr_hia >= rxq->count, the while-loop never terminates because cr_tia is wrapped via modulo rxq->count and can never equal an out-of-range cr_hia.

Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia in the TX path. Log invalid values with bt_dev_err before returning.

Fixes c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
---
 drivers/bluetooth/btintel_pcie.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/bluetooth/btintel_pcie.c +16 -0
index 4807361a58a7..444cc50174fb 100644
@@ -2065,6 +2065,11 @@ static void btintel_pcie_msix_tx_handle(struct btintel_pcie_data *data)
 
 	txq = &data->txq;
 
+	if (cr_hia >= txq->count) {
+		bt_dev_err(data->hdev, "TXQ: invalid cr_hia %u", cr_hia);
+		return;
+	}
+
 	while (cr_tia != cr_hia) {
 		data->tx_wait_done = true;
 		wake_up(&data->tx_wait_q);
@@ -2644,6 +2649,11 @@ static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data)
 
 	rxq = &data->rxq;
 
+	if (cr_hia >= rxq->count) {
+		bt_dev_err(hdev, "RXQ: invalid cr_hia %u", cr_hia);
+		return;
+	}
+
 	/* The firmware sends multiple CD in a single MSI-X and it needs to
 	 * process all received CDs in this interrupt.
 	 */
@@ -2651,6 +2661,12 @@ static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data)
 		urbd1 = &rxq->urbd1s[cr_tia];
 		ipc_print_urbd1(data->hdev, urbd1, cr_tia);
 
+		if (urbd1->frbd_tag >= rxq->count) {
+			bt_dev_err(hdev, "RXQ: invalid frbd_tag %u",
+				   urbd1->frbd_tag);
+			return;
+		}
+
 		buf = &rxq->bufs[urbd1->frbd_tag];
 		if (!buf) {
 			bt_dev_err(hdev, "RXQ: failed to get the DMA buffer for %d",
Signature · 1 line
2.43.0
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1165082/

---Test result---

Test Summary:

CheckPatch                    PASS      0.62 seconds
VerifyFixes                   PASS      0.08 seconds
VerifySignedoff               PASS      0.08 seconds
GitLint                       PASS      0.24 seconds
SubjectPrefix                 PASS      0.07 seconds
BuildKernel                   PASS      28.40 seconds
CheckAllWarning               PASS      33.55 seconds
CheckSparse                   PASS      35.80 seconds
BuildKernel32                 PASS      29.12 seconds
CheckKernelLLVM               PASS      34.83 seconds
TestRunnerSetup               PASS      768.66 seconds
IncrementalBuild              PASS      26.84 seconds

https://github.com/bluez/bluetooth-next/pull/769

---
Regards,
Linux Bluetooth

#2 lore raw
In reply to Ravindra
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Tue, 15 Sep 2026 10:42:15 +0530 you wrote:

In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer.

[...]

Here is the summary with links:
- [v1] Bluetooth: btintel_pcie: validate device-supplied DMA indices

    https://git.kernel.org/bluetooth/bluetooth-next/c/37a111293453

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html