Skip to contentSkip to conversation

Implement Wa_14021768792 to bypass m_n ratio limit

PATCH Superseded Suraj Kandpal 4 participants 74 messages Sep 17 – Oct 22

Subsystems (3)

v4 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v4 cover Implement Wa_14021768792 to bypass m_n ratio limit

For Platforms that support higher link rates, there is a limitation on Link M /Link N ratio.
If the CEILING( Link M / Link N ) ratio is greater than 10.0, then hardware cannot support the given resolution / refresh rate at the given configuration.
For BMG Wa_14021768792 helps to bypass this limitation and allows it to support the ratio till 15.0.

This series adds the missing restrictions for earlier platforms and adds the Wa_14021768792 for BMG as per Bspec:49266

Ankit Nautiyal (8):
drm/i915/display: Add helper to compute link M/N ratio for reuse drm/i915/dp_mst: Limit M/N ratio for MST
drm/i915/dp: Add M/N ratio check for DP link config drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14 drm/i915/display_wa: Add support for Wa_14021768792 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n

    ratio > 10

drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

Suraj Kandpal (2):
drm/i915/dp: Limit M/N ratio for DP SST
drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

 drivers/gpu/drm/i915/display/intel_display.c  | 124 ++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |   4 +
 .../gpu/drm/i915/display/intel_display_regs.h |  12 ++
 .../drm/i915/display/intel_display_types.h    |   2 +
 .../gpu/drm/i915/display/intel_display_wa.c   |   9 +
 .../gpu/drm/i915/display/intel_display_wa.h   |   1 +
 drivers/gpu/drm/i915/display/intel_dp.c       | 172 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_dp.h       |   6 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |   7 +
 9 files changed, 326 insertions(+), 11 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v4 1/10 drm/i915/display: Add helper to compute link M/N ratio for reuse

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().

The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation.

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +11 -4
index 9151ea6c15ab..f04a6f97e05a 100644
@@ -2641,13 +2641,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
+{
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock, bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes);
@@ -2664,9 +2671,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));
 }
 
 void intel_panel_sanitize_ssc(struct intel_display *display)
Signature · 1 line
2.34.1
Reviewed-by on v4 1/10
#2 lore raw

RE: [PATCH v4 01/10] drm/i915/display: Add helper to compute link M/N ratio for reuse

Quoted 12 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 01/10] drm/i915/display: Add helper to compute link M/N ratio for reuse

Quoted 8 lines

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().

The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation.

The commit says this helper is for reuse, but it remains static with no caller added, please either explain the intended upcoming user in the commit message or make the helper non-static when the caller is introduced.

Quoted 20 lines

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 9151ea6c15ab..f04a6f97e05a 100644

drivers/gpu/drm/i915/display/intel_display.c static void compute_m_n(u32 *ret_m, u32 *ret_n, · line 2649

Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display.c +5 -0
@@ -2641,13 +2641,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
 {
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);

Since this helper may be reused elsewhere, please document here that the fixed N is intentional and follows the Windows/BIOS M/N requirement.

Quoted 14 lines
drivers/gpu/drm/i915/display/intel_display.c +2 -1
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock,
 bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes); @@ -

2664,9 +2671,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,

drivers/gpu/drm/i915/display/intel_display.c intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes, · line 2676

Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display.c +3 -3
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));

With mentioned changes addressed,
LGTM

Quoted 5 lines

}

void intel_panel_sanitize_ssc(struct intel_display *display)
--
2.34.1

#3 lore raw

RE: [PATCH v4 01/10] drm/i915/display: Add helper to compute link M/N ratio for reuse

Quoted 19 lines
Quoted 19 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 01/10] drm/i915/display: Add helper to compute link M/N ratio for reuse

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().

Quoted 6 lines
Quoted 2 lines

The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation.

The commit says this helper is for reuse, but it remains static with no caller added, please either explain the intended upcoming user in the commit message or make the helper non-static when the caller is introduced.

We don't mention in the commit message that this function will be used says in the 4th patch of this patch series. We have already mentioned that this will be reused later on . I can however add that this function will be used in later commits.

Quoted 24 lines
Quoted 24 lines

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 9151ea6c15ab..f04a6f97e05a 100644
@@ -2641,13 +2641,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);  }
 
Quoted 10 lines

drivers/gpu/drm/i915/display/intel_display.c static void compute_m_n(u32 *ret_m, u32 *ret_n, · line 2649

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +5 -0
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
 {
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);

Since this helper may be reused elsewhere, please document here that the fixed N is intentional and follows the Windows/BIOS M/N requirement.

We really don't want to document this here in this commit seeing as this was not documented where it was previously called Either and this commit only moves that call into a helper function. Other wise we will end up with a lot of unnecessary documentation In code which is not required.
Ankit Nautiyal what do you think ?

Regards,
Suraj Kandpal

Quoted 35 lines
Quoted 14 lines
drivers/gpu/drm/i915/display/intel_display.c +2 -1
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock,
 bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes); @@ -
Quoted 1 line

2664,9 +2671,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int

nlanes,

drivers/gpu/drm/i915/display/intel_display.c intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes, · line 2676

Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display.c +3 -3
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));

With mentioned changes addressed,
LGTM

Quoted 5 lines

}

void intel_panel_sanitize_ssc(struct intel_display *display)
--
2.34.1

#4 lore raw

PATCH v4 2/10 drm/i915/dp: Limit M/N ratio for DP SST

In reply to Suraj Kandpal

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC.

With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for 8b/10b, so e.g. HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

Note: This change applies the check only for SST. Support for MST will be added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville)
-Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction.
v3:
-Rebase on the link caps iterator based link config selection. -Set the constraint up in intel_dp_compute_config_limits() by narrowing the link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre)
-Use a limit of 4 on DG2. (Wa_14014191401)
-Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case for it. v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 101 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 107 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +2 -2
index f04a6f97e05a..c53163d7c082 100644
@@ -2641,8 +2641,8 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
 		    pixel_clock, link_symbol_clock,
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index eecafff167d3..404168f4213b 100644
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display *display, enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 
 #endif
drivers/gpu/drm/i915/display/intel_dp.c +101 -0

137 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dp.h +2 -0
index 04fae203bb69..aa58833a405b 100644
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,
 
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
+
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
Signature · 1 line
2.34.1
#5 lore raw

RE: [PATCH v4 02/10] drm/i915/dp: Limit M/N ratio for DP SST

Quoted 16 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 02/10] drm/i915/dp: Limit M/N ratio for DP SST

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC.

Quoted 7 lines

With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Nit: This check is inside intel_dp_compute_config_limits, which mst_stream_compute_config_limits also calls, so MST compute is already constrained. The subject ("for DP SST") and the "applies only for SST" note contradict that and the "SST and MST paths both get it" sentence. Please say that MST compute is covered and only MST mode_valid is left for the follow-up.

Quoted 81 lines

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for 8b/10b, so e.g. HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

Note: This change applies the check only for SST. Support for MST will be added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville) -Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction.
v3:

(quoted diff) +0 -2
-Rebase on the link caps iterator based link config selection.
-Set the constraint up in intel_dp_compute_config_limits() by narrowing the

link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre) -Use a limit of 4 on DG2. (Wa_14014191401) -Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case for it. v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 101 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 107 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +2 -2
index f04a6f97e05a..c53163d7c082 100644
@@ -2641,8 +2641,8 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int
 link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		    pixel_clock, link_symbol_clock,
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index eecafff167d3..404168f4213b 100644
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display *display,
 enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);  int
 intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 

#endif

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
index 0cd5e6b5034c..f6a2152c4432 100644
@@ -61,6 +61,7 @@
 #include "intel_cx0_phy.h"
 #include "intel_ddi.h"
 #include "intel_de.h"
+#include "intel_display.h"
 #include "intel_display_driver.h"
 #include "intel_display_jiffies.h"
 #include "intel_display_utils.h"

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct · line 1273

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp.c +4 -0
@@ -1265,6 +1266,34 @@ bool intel_dp_has_dsc(const struct
 intel_connector *connector)
 	return true;
 }
 
+static int
+intel_dp_get_max_m_n_ratio(struct intel_display *display) {
+	if (display->platform.dg2)
+		return 4;

Please route the DG2 limit through intel_display_wa() (INTEL_DISPLAY_WA_14014191401) instead of a bare platform check. Right now the Wa ID only appears in the changelog.

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1275

Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+
+	return 10;

Also, what's the BSpec reference for the generic limit of 10 ?

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp.c +5 -0
+}
+
+static bool
+intel_dp_can_support_m_n(struct intel_display *display,
+			 int pixel_clock, int link_rate)

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1290

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10 -0
+{
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	u32 link_m, link_n;
+	int m_n_ratio;
+
+	intel_display_compute_link_m_n(&link_m, &link_n, pixel_clock,
+				       intel_dp_link_symbol_clock(link_rate));
+
+	if (!link_n)
+		return true;

link_n can't be 0 here: compute_m_n() fixes N at 0x80000 and only halves it while M/N exceed 24 bits. Please drop the check.

Quoted 115 lines
drivers/gpu/drm/i915/display/intel_dp.c +31 -0
+
+	m_n_ratio = DIV_ROUND_UP(link_m, link_n);
+
+	return m_n_ratio <= max_m_n_ratio;
+}
+
 static
 bool intel_dp_can_join(struct intel_dp *intel_dp,
 		       int num_joined_pipes)
@@ -1300,6 +1329,31 @@ bool intel_dp_dotclk_valid(struct intel_display
 *display,
 	return target_clock <= effective_dotclk_limit;  }
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
+pixel_clock) {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_dp_link_caps_order order = {
+		.key = INTEL_DP_LINK_CAPS_ORDER_KEY_RATE_LANE,
+		.dir = INTEL_DP_LINK_CAPS_ORDER_DIR_DESC,
+	};
+	struct intel_dp_link_config link_config;
+	struct intel_dp_link_caps_iter iter;
+	bool found = false;
+
+	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
+				      INTEL_DP_LINK_CAPS_FILTER_ALL);
+	for_each_dp_link_config(&iter, &link_config) {
+		if (intel_dp_can_support_m_n(display, pixel_clock,
 link_config.rate)) {
+			found = true;
+
+			break;
+		}
+	}
+	intel_dp_link_caps_iter_end(&iter);
+
+	return found;
+}
+
 static enum drm_mode_status
 intel_dp_mode_valid_format(struct intel_connector *connector,

const struct drm_display_mode *mode, @@ -
1454,6 +1508,9 @@ intel_dp_mode_valid(struct drm_connector *_connector,

drivers/gpu/drm/i915/display/intel_dp.c +3 -0
 			return status;
 	}
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, target_clock))
+		return MODE_CLOCK_HIGH;
+
 	/*
 	 * TODO: Even when using a 4:2:0 sink_format

intel_dp_output_format()
* will always choose a 4:4:4 output_format if the DFP can do the @@
-2654,6 +2711,47 @@ intel_dp_dsc_compute_pipe_bpp_limits(struct intel_connector *connector,

drivers/gpu/drm/i915/display/intel_dp.c +7 -0
 	return true;
 }
 
+static bool
+intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
+				  struct drm_connector_state *conn_state,
+				  const struct intel_crtc_state *crtc_state,
+				  struct link_config_limits *limits) {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_connector *connector = to_intel_connector(conn_state-
Quoted 1 line

connector);

drivers/gpu/drm/i915/display/intel_dp.c +4 -0
+	struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
+	struct intel_dp_link_caps_order order =
+		intel_dp_link_caps_connector_compute_order(connector);
+	struct intel_dp_link_caps_filter new_filter =

INTEL_DP_LINK_CAPS_FILTER_NONE;

drivers/gpu/drm/i915/display/intel_dp.c +6 -0
+	int pixel_clock = intel_dp_mode_clock(crtc_state, conn_state);
+	struct intel_dp_link_config link_config;
+	struct intel_dp_link_caps_iter iter;
+	bool found = false;
+
+	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits-
Quoted 1 line

link_config_filter);

drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+	for_each_dp_link_config(&iter, &link_config) {
+		if (!intel_dp_can_support_m_n(display, pixel_clock,

link_config.rate))

drivers/gpu/drm/i915/display/intel_dp.c +3 -0
+			continue;
+
+		intel_dp_link_caps_filter_add(link_caps, &new_filter,

&link_config);

drivers/gpu/drm/i915/display/intel_dp.c +7 -0
+		found = true;
+	}
+	intel_dp_link_caps_iter_end(&iter);
+
+	if (!found) {
+		drm_dbg_kms(display->drm,
+			    "[CONNECTOR:%d:%s] No link config with a Link

M/N ratio <= %d\n",

drivers/gpu/drm/i915/display/intel_dp.c +11 -0
+			    connector->base.base.id, connector->base.name,
+			    intel_dp_get_max_m_n_ratio(display));
+
+		return false;
+	}
+
+	limits->link_config_filter = new_filter;
+
+	return true;
+}
+
 bool
 intel_dp_compute_config_limits(struct intel_dp *intel_dp,
 			       struct drm_connector_state *conn_state, @@ -

2770,6 +2868,9 @@ intel_dp_compute_config_limits(struct intel_dp *intel_dp,

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 		limits->link_config_filter = new_filter;
 	}
 
+	if (!intel_dp_compute_m_n_ratio_limits(intel_dp, conn_state,

crtc_state, limits))

drivers/gpu/drm/i915/display/intel_dp.c

Quoted 1 line
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+		return false;

For MSO (eDP splitter) this uses the unsplit clock, while the programmed link M/N uses crtc_clock / mso_link_count (computed later in intel_dp_compute_config()). Does the DDA limit apply to the per-segment clock? If so, the check is too strict by a factor of mso_link_count.

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+
 	if (!intel_dp_test_compute_config(connector, crtc_state, limits))
 		return false;
drivers/gpu/drm/i915/display/intel_dp.h +0 -0
index 04fae203bb69..aa58833a405b 100644

drivers/gpu/drm/i915/display/intel_dp.h bool intel_dp_joiner_candidate_valid(struct · line 244

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_dp.h +2 -0
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct
 intel_connector *connector,
 
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
+pixel_clock);

nit: This is only used in intel_dp.c. Make it static unless the MST follow-up needs it, and if it does, say so.

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_dp.h +1 -0
+
 int intel_dp_link_init(struct intel_dp *intel_dp);  void

intel_dp_link_cleanup(struct intel_dp *intel_dp);

--
2.34.1

#6 lore raw

RE: [PATCH v4 02/10] drm/i915/dp: Limit M/N ratio for DP SST

Quoted 15 lines
Quoted 7 lines

Subject: [PATCH v4 02/10] drm/i915/dp: Limit M/N ratio for DP SST

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC.

Quoted 7 lines

With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Quoted 6 lines

Nit: This check is inside intel_dp_compute_config_limits, which mst_stream_compute_config_limits also calls, so MST compute is already constrained. The subject ("for DP SST") and the "applies only for SST" note contradict that and the "SST and MST paths both get it" sentence. Please say that MST compute is covered and only MST mode_valid is left for the follow- up.

Sure will update the commit message

Quoted 90 lines
Quoted 5 lines

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for

8b/10b, so e.g.

Quoted 15 lines

HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

Note: This change applies the check only for SST. Support for MST will be added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville) -Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction. v3:

(quoted diff) +0 -2
-Rebase on the link caps iterator based link config selection.
-Set the constraint up in intel_dp_compute_config_limits() by
Quoted 2 lines

narrowing the link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre) -Use a

limit of 4 on DG2.

Quoted 2 lines

(Wa_14014191401) -Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case

for it.

drivers/gpu/drm/i915/display/intel_display.c static void compute_m_n(u32 *ret_m, u32

Quoted 19 lines

v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 101 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 107 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index f04a6f97e05a..c53163d7c082 100644
@@ -2641,8 +2641,8 @@ static void compute_m_n(u32 *ret_m, u32

*ret_n,

Quoted 43 lines
drivers/gpu/drm/i915/display/intel_display.c +2 -2
 	intel_reduce_m_n_ratio(ret_m, ret_n);  }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int
 link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
 		    pixel_clock, link_symbol_clock, diff --git

a/drivers/gpu/drm/i915/display/intel_display.h
b/drivers/gpu/drm/i915/display/intel_display.h
index eecafff167d3..404168f4213b 100644

drivers/gpu/drm/i915/display/intel_display.h +0 -0
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display
 *display, enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);  int

intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);

drivers/gpu/drm/i915/display/intel_display.h +2 -0
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 
 #endif
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
index 0cd5e6b5034c..f6a2152c4432 100644
@@ -61,6 +61,7 @@
 #include "intel_cx0_phy.h"
 #include "intel_ddi.h"
 #include "intel_de.h"
+#include "intel_display.h"
 #include "intel_display_driver.h"
 #include "intel_display_jiffies.h"
 #include "intel_display_utils.h"
@@ -1265,6 +1266,34 @@ bool intel_dp_has_dsc(const struct
 intel_connector *connector)
 	return true;
 }
 
Quoted 9 lines

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1273

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp.c +4 -0
+static int
+intel_dp_get_max_m_n_ratio(struct intel_display *display) {
+	if (display->platform.dg2)
+		return 4;

Please route the DG2 limit through intel_display_wa() (INTEL_DISPLAY_WA_14014191401) instead of a bare platform check. Right now the Wa ID only appears in the changelog.

Ill add a seprarte patch series moving this into its own display wa framework rather than doing it here Since this series is already adding a WA

Quoted 4 lines

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1275

Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+
+	return 10;

Also, what's the BSpec reference for the generic limit of 10 ?

Will add it

Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10 -0
+}
+
+static bool
+intel_dp_can_support_m_n(struct intel_display *display,
+			 int pixel_clock, int link_rate)
+{
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	u32 link_m, link_n;
+	int m_n_ratio;
+
Quoted 8 lines

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1290

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp.c +5 -0
+	intel_display_compute_link_m_n(&link_m, &link_n, pixel_clock,
+				       intel_dp_link_symbol_clock(link_rate));
+
+	if (!link_n)
+		return true;

link_n can't be 0 here: compute_m_n() fixes N at 0x80000 and only halves it while M/N exceed 24 bits. Please drop the check.

Will drop it

Quoted 115 lines
Quoted 53 lines
drivers/gpu/drm/i915/display/intel_dp.c +31 -0
+
+	m_n_ratio = DIV_ROUND_UP(link_m, link_n);
+
+	return m_n_ratio <= max_m_n_ratio;
+}
+
 static
 bool intel_dp_can_join(struct intel_dp *intel_dp,
 		       int num_joined_pipes)
@@ -1300,6 +1329,31 @@ bool intel_dp_dotclk_valid(struct intel_display
 *display,
 	return target_clock <= effective_dotclk_limit;  }
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
+pixel_clock) {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_dp_link_caps_order order = {
+		.key = INTEL_DP_LINK_CAPS_ORDER_KEY_RATE_LANE,
+		.dir = INTEL_DP_LINK_CAPS_ORDER_DIR_DESC,
+	};
+	struct intel_dp_link_config link_config;
+	struct intel_dp_link_caps_iter iter;
+	bool found = false;
+
+	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
+				      INTEL_DP_LINK_CAPS_FILTER_ALL);
+	for_each_dp_link_config(&iter, &link_config) {
+		if (intel_dp_can_support_m_n(display, pixel_clock,
 link_config.rate)) {
+			found = true;
+
+			break;
+		}
+	}
+	intel_dp_link_caps_iter_end(&iter);
+
+	return found;
+}
+
 static enum drm_mode_status
 intel_dp_mode_valid_format(struct intel_connector *connector,

const struct drm_display_mode *mode, @@ -
1454,6 +1508,9 @@ intel_dp_mode_valid(struct drm_connector *_connector,

drivers/gpu/drm/i915/display/intel_dp.c +3 -0
 			return status;
 	}
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, target_clock))
+		return MODE_CLOCK_HIGH;
+
 	/*
 	 * TODO: Even when using a 4:2:0 sink_format
Quoted 2 lines

intel_dp_output_format()
* will always choose a 4:4:4 output_format if the DFP can do the

@@

Quoted 59 lines

-2654,6 +2711,47 @@ intel_dp_dsc_compute_pipe_bpp_limits(struct intel_connector *connector,

drivers/gpu/drm/i915/display/intel_dp.c +7 -0
 	return true;
 }
 
+static bool
+intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
+				  struct drm_connector_state *conn_state,
+				  const struct intel_crtc_state *crtc_state,
+				  struct link_config_limits *limits) {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_connector *connector = to_intel_connector(conn_state-
Quoted 1 line

connector);

drivers/gpu/drm/i915/display/intel_dp.c +4 -0
+	struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
+	struct intel_dp_link_caps_order order =
+		intel_dp_link_caps_connector_compute_order(connector);
+	struct intel_dp_link_caps_filter new_filter =

INTEL_DP_LINK_CAPS_FILTER_NONE;

drivers/gpu/drm/i915/display/intel_dp.c +6 -0
+	int pixel_clock = intel_dp_mode_clock(crtc_state, conn_state);
+	struct intel_dp_link_config link_config;
+	struct intel_dp_link_caps_iter iter;
+	bool found = false;
+
+	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits-
Quoted 1 line

link_config_filter);

drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+	for_each_dp_link_config(&iter, &link_config) {
+		if (!intel_dp_can_support_m_n(display, pixel_clock,

link_config.rate))

drivers/gpu/drm/i915/display/intel_dp.c +3 -0
+			continue;
+
+		intel_dp_link_caps_filter_add(link_caps, &new_filter,

&link_config);

drivers/gpu/drm/i915/display/intel_dp.c +7 -0
+		found = true;
+	}
+	intel_dp_link_caps_iter_end(&iter);
+
+	if (!found) {
+		drm_dbg_kms(display->drm,
+			    "[CONNECTOR:%d:%s] No link config with a Link

M/N ratio <= %d\n",

drivers/gpu/drm/i915/display/intel_dp.c +11 -0
+			    connector->base.base.id, connector->base.name,
+			    intel_dp_get_max_m_n_ratio(display));
+
+		return false;
+	}
+
+	limits->link_config_filter = new_filter;
+
+	return true;
+}
+
 bool
 intel_dp_compute_config_limits(struct intel_dp *intel_dp,
 			       struct drm_connector_state *conn_state, @@ -

2770,6 +2868,9 @@ intel_dp_compute_config_limits(struct intel_dp *intel_dp,

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 		limits->link_config_filter = new_filter;
 	}
Quoted 8 lines

drivers/gpu/drm/i915/display/intel_dp.c

Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+	if (!intel_dp_compute_m_n_ratio_limits(intel_dp, conn_state,

crtc_state, limits))

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+		return false;

For MSO (eDP splitter) this uses the unsplit clock, while the programmed link M/N uses crtc_clock / mso_link_count (computed later in intel_dp_compute_config()). Does the DDA limit apply to the per-segment clock? If so, the check is too strict by a factor of mso_link_count.

We use unsplit clock here and switch to using mso clock later in patch 4 so its not a problem.

Quoted 13 lines
Quoted 13 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+
 	if (!intel_dp_test_compute_config(connector, crtc_state, limits))
 		return false;
drivers/gpu/drm/i915/display/intel_dp.h +0 -0
index 04fae203bb69..aa58833a405b 100644
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct
 intel_connector *connector,
 
Quoted 7 lines

drivers/gpu/drm/i915/display/intel_dp.h bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp.h +2 -0
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
+pixel_clock);

nit: This is only used in intel_dp.c. Make it static unless the MST follow-up needs it, and if it does, say so.

This is used in a later commit . will mention in commit message

Regards,
Suraj Kandpal

Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_dp.h +1 -0
+
 int intel_dp_link_init(struct intel_dp *intel_dp);  void

intel_dp_link_cleanup(struct intel_dp *intel_dp);

--
2.34.1

#7 lore raw

PATCH v4 3/10 drm/i915/dp_mst: Limit M/N ratio for MST

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link rate.

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration.
v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +5 -0
index 0c362784afe4..823fe99ca0a1 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}
+
 	/*
 	 * TODO:
 	 * - Also check if compression would allow for the mode
Signature · 1 line
2.34.1
#8 lore raw

RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 49 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link rate.

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration.
v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 0c362784afe4..823fe99ca0a1 100644

drivers/gpu/drm/i915/display/intel_dp_mst.c mst_connector_mode_valid_ctx(struct · line 1572

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct
 drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}

Since MST appears to use only the max_bw_config for link configuration, should the M/N ratio check in mode_valid also be performed against that configuration's max_link_clock? Currently, intel_dp_mode_valid_m_n accepts the mode if any allowed config passes the ratio check.

For example, on DG2 with a UHBR10 MST link, could a ~1.3 GHz stream pass the check using HBR3 but later fail during config computation because MST uses UHBR10, which does not satisfy the ratio limit? If so, should the validation use the same link configuration that MST will actually use?

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
+
 	/*
 	 * TODO:

* - Also check if compression would allow for the mode
--
2.34.1

#9 lore raw

RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 77 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 15 October 2026 22:59
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 20 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

Quoted 4 lines

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link

rate.

Quoted 24 lines

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration. v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that
(Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 0c362784afe4..823fe99ca0a1 100644

drivers/gpu/drm/i915/display/intel_dp_mst.c mst_connector_mode_valid_ctx(struct · line 1572

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct
 drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}

Since MST appears to use only the max_bw_config for link configuration, should the M/N ratio check in mode_valid also be performed against that configuration's max_link_clock? Currently, intel_dp_mode_valid_m_n accepts the mode if any allowed config passes the ratio check.

Quoted 4 lines

For example, on DG2 with a UHBR10 MST link, could a ~1.3 GHz stream pass the check using HBR3 but later fail during config computation because MST uses UHBR10, which does not satisfy the ratio limit? If so, should the validation use the same link configuration that MST will actually use?

Lets start with DG2 does not have UHBR to begin with.
Also compute doesn't actually use max_bw_config. MST goes through
intel_dp_compute_config_limits() too, so configs that fail the ratio are already
filtered out and it picks from what's left. In your example it'd just use HBR3 instead of failing (DG2 has no UHBR anyway). For mode_valid I didn't want to check only max_bw_config, since the symbol clock
isn't monotonic in link rate and a lower rate can pass where the max one fails.
If something slips through, compute still does the exact check.

Regards,
Suraj Kandpal

Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
+
 	/*
 	 * TODO:

* - Also check if compression would allow for the mode
--
2.34.1

#10 lore raw

RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 106 lines

-----Original Message-----
From: Kandpal, Suraj <[email protected]>
Sent: 21 October 2026 10:39
To: Golani, Mitulkumar Ajitkumar <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 66 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 15 October 2026 22:59
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 20 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

Quoted 5 lines

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link

rate.

Quoted 28 lines

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration. v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that
(Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 0c362784afe4..823fe99ca0a1 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct
 drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
Quoted 9 lines

drivers/gpu/drm/i915/display/intel_dp_mst.c mst_connector_mode_valid_ctx(struct drm_connector *_connector, · line 1571

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}

Since MST appears to use only the max_bw_config for link configuration, should the M/N ratio check in mode_valid also be performed against that configuration's max_link_clock? Currently, intel_dp_mode_valid_m_n accepts the mode if any allowed config passes

the ratio check.

Quoted 5 lines

For example, on DG2 with a UHBR10 MST link, could a ~1.3 GHz stream pass the check using HBR3 but later fail during config computation because MST uses UHBR10, which does not satisfy the ratio limit? If so, should the validation use the same link configuration that MST will

actually use?

Lets start with DG2 does not have UHBR to begin with.
Also compute doesn't actually use max_bw_config. MST goes through intel_dp_compute_config_limits() too, so configs that fail the ratio are already filtered out and it picks from what's left. In your example it'd just use HBR3 instead of failing (DG2 has no UHBR anyway).
For mode_valid I didn't want to check only max_bw_config, since the symbol clock isn't monotonic in link rate and a lower rate can pass where the max one fails.
If something slips through, compute still does the exact check.

Quoted 2 lines

Regards,
Suraj Kandpal

Could we double-check the MST path here ?

My understanding is that DG2 supports UHBR, and intel_dp_compute_config_limits
pins link_config_filter to the max-BW config for MST before the M/N ratio filtering runs. If that config fails the ratio check, would the stream be rejected rather than falling back to HBR3 ?

Also, since mst_stream_compute_link_config uses the same max-BW config for port_clock, should mode_valid check the ratio against that config as well, rather than accepting the mode based on any allowed config?

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
+
 	/*
 	 * TODO:

* - Also check if compression would allow for the mode
--
2.34.1

#11 lore raw

RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 136 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 22 October 2026 22:11
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 60 lines

-----Original Message-----
From: Kandpal, Suraj <[email protected]>
Sent: 21 October 2026 10:39
To: Golani, Mitulkumar Ajitkumar <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 48 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 15 October 2026 22:59
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

Quoted 22 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 03/10] drm/i915/dp_mst: Limit M/N ratio for MST

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

Quoted 5 lines

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link

rate.

Quoted 7 lines

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case

configuration.

Quoted 50 lines
Quoted 21 lines
Quoted 21 lines

v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that
(Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 0c362784afe4..823fe99ca0a1 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct
 drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
Quoted 10 lines

drivers/gpu/drm/i915/display/intel_dp_mst.c mst_connector_mode_valid_ctx(struct drm_connector *_connector, · line 1571

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}

Since MST appears to use only the max_bw_config for link configuration, should the M/N ratio check in mode_valid also be performed against that configuration's max_link_clock? Currently, intel_dp_mode_valid_m_n accepts the mode if any allowed config passes

the ratio check.

Quoted 6 lines

For example, on DG2 with a UHBR10 MST link, could a ~1.3 GHz stream pass the check using HBR3 but later fail during config computation because MST uses UHBR10, which does not satisfy the ratio limit? If so, should the validation use the same link configuration that MST will

actually use?

Lets start with DG2 does not have UHBR to begin with.
Also compute doesn't actually use max_bw_config. MST goes through intel_dp_compute_config_limits() too, so configs that fail the ratio are already filtered out and it picks from what's left. In your example it'd just use HBR3 instead of failing (DG2 has no UHBR anyway). For mode_valid I didn't want to check only max_bw_config, since the symbol clock isn't monotonic in link rate and a lower rate can pass where the max one fails.
If something slips through, compute still does the exact check.

Quoted 2 lines

Regards,
Suraj Kandpal

Could we double-check the MST path here ?

My understanding is that DG2 supports UHBR, and intel_dp_compute_config_limits pins link_config_filter to the max-BW config for MST before the M/N ratio filtering runs.
If that config fails the ratio check, would the stream be rejected rather than falling back to HBR3 ?

Quoted 4 lines

Also, since mst_stream_compute_link_config uses the same max-BW config for port_clock, should mode_valid check the ratio against that config as well, rather than accepting the mode based on any allowed config?

What would you propose as a fix for this.

Regards,
Suraj Kandpal

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
+
 	/*
 	 * TODO:

* - Also check if compression would allow for the mode
--
2.34.1

#12 lore raw

PATCH v4 4/10 drm/i915/dp: Add M/N ratio check for DP link config

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous patches only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

This check works off the M/N values as actually computed, which exposes a mismatch with the prediction done while computing the limits: the pixel clock there is the one before intel_dp_compute_config() divides adjusted_mode->crtc_clock by the MSO link count. Divide in the prediction too, so both agree. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on every iteration.

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre)
-Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it. (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 37 +++++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 +++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 41 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +35 -2
index f6a2152c4432..fbfc00101886 100644
@@ -1294,6 +1294,14 @@ intel_dp_can_support_m_n(struct intel_display *display,
 	return m_n_ratio <= max_m_n_ratio;
 }
 
+static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
+{
+	if (!intel_dp->mso_link_count)
+		return pixel_clock;
+
+	return pixel_clock / intel_dp->mso_link_count;
+}
+
 static
 bool intel_dp_can_join(struct intel_dp *intel_dp,
 		       int num_joined_pipes)
@@ -1332,6 +1340,7 @@ bool intel_dp_dotclk_valid(struct intel_display *display,
 bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 {
 	struct intel_display *display = to_intel_display(intel_dp);
+	int m_n_pixel_clock = intel_dp_mso_pixel_clock(intel_dp, pixel_clock);
 	struct intel_dp_link_caps_order order = {
 		.key = INTEL_DP_LINK_CAPS_ORDER_KEY_RATE_LANE,
 		.dir = INTEL_DP_LINK_CAPS_ORDER_DIR_DESC,
@@ -1343,7 +1352,8 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, pixel_clock, link_config.rate)) {
+		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+					     link_config.rate)) {
 			found = true;
 
 			break;
@@ -2723,7 +2733,8 @@ intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
 	struct intel_dp_link_caps_order order =
 		intel_dp_link_caps_connector_compute_order(connector);
 	struct intel_dp_link_caps_filter new_filter = INTEL_DP_LINK_CAPS_FILTER_NONE;
-	int pixel_clock = intel_dp_mode_clock(crtc_state, conn_state);
+	int pixel_clock = intel_dp_mso_pixel_clock(intel_dp,
+						  intel_dp_mode_clock(crtc_state, conn_state));
 	struct intel_dp_link_config link_config;
 	struct intel_dp_link_caps_iter iter;
 	bool found = false;
@@ -3382,6 +3393,24 @@ static bool can_enable_drrs(struct intel_connector *connector,
 		intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS;
 }
 
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+
+	if (!m_n || !m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}
+
 static void
 intel_dp_drrs_compute_config(struct intel_connector *connector,
 			     struct intel_crtc_state *pipe_config,
@@ -3420,6 +3449,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
 			       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
 			       &pipe_config->dp_m2_n2);
 
+	intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m2_n2);
+
 	/* FIXME: abstract this better */
 	if (pipe_config->splitter.enable)
 		pipe_config->dp_m2_n2.data_m *= pipe_config->splitter.link_count;
@@ -3739,6 +3770,8 @@ intel_dp_compute_config(struct intel_atomic_state *state,
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m_n);
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state);
drivers/gpu/drm/i915/display/intel_dp.h +4 -0
index aa58833a405b..4c975358ab96 100644
@@ -26,6 +26,7 @@ struct intel_display;
 struct intel_dp;
 struct intel_dp_link_config;
 struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter;
@@ -244,4 +245,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
index 823fe99ca0a1..6d2e234a9e9b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);
 	else
Signature · 1 line
2.34.1
#13 lore raw

RE: [PATCH v4 04/10] drm/i915/dp: Add M/N ratio check for DP link config

Quoted 69 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 04/10] drm/i915/dp: Add M/N ratio check for DP link config

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous patches only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

This check works off the M/N values as actually computed, which exposes a mismatch with the prediction done while computing the limits: the pixel clock there is the one before intel_dp_compute_config() divides adjusted_mode-

Quoted 1 line

crtc_clock by the MSO link count. Divide in the prediction too, so both

agree. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on every iteration.

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre) -Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it.
(Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 37 +++++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 +++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 41 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
index f6a2152c4432..fbfc00101886 100644
@@ -1294,6 +1294,14 @@ intel_dp_can_support_m_n(struct intel_display
 *display,

drivers/gpu/drm/i915/display/intel_dp.c intel_dp_can_support_m_n(struct intel_display · line 1304

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +7 -0
 	return m_n_ratio <= max_m_n_ratio;
 }
 
+static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int
+pixel_clock) {
+	if (!intel_dp->mso_link_count)
+		return pixel_clock;
+
+	return pixel_clock / intel_dp->mso_link_count; }
+

These hunks fix the prediction added in "drm/i915/dp: Limit M/N ratio for DP SST". On its own that patch over-restricts MSO eDP by mso_link_count . Please squash them, together with the MSO/joiner explanation, into that patch so it is correct on its own, and keep this patch to the debug check.

Quoted 49 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 static
 bool intel_dp_can_join(struct intel_dp *intel_dp,
 		       int num_joined_pipes)
@@ -1332,6 +1340,7 @@ bool intel_dp_dotclk_valid(struct intel_display
 *display,  bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
 pixel_clock)  {
 	struct intel_display *display = to_intel_display(intel_dp);
+	int m_n_pixel_clock = intel_dp_mso_pixel_clock(intel_dp,
 pixel_clock);
 	struct intel_dp_link_caps_order order = {
 		.key = INTEL_DP_LINK_CAPS_ORDER_KEY_RATE_LANE,
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
 		.dir = INTEL_DP_LINK_CAPS_ORDER_DIR_DESC,
@@ -1343,7 +1352,8 @@ bool intel_dp_mode_valid_m_n(struct intel_dp
 *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, pixel_clock,
 link_config.rate)) {
+		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+					     link_config.rate)) {
 			found = true;
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
 			break;
@@ -2723,7 +2733,8 @@ intel_dp_compute_m_n_ratio_limits(struct
 intel_dp *intel_dp,
 	struct intel_dp_link_caps_order order =
 		intel_dp_link_caps_connector_compute_order(connector);
 	struct intel_dp_link_caps_filter new_filter =
 INTEL_DP_LINK_CAPS_FILTER_NONE;
-	int pixel_clock = intel_dp_mode_clock(crtc_state, conn_state);
+	int pixel_clock = intel_dp_mso_pixel_clock(intel_dp,
+
 intel_dp_mode_clock(crtc_state, conn_state));
drivers/gpu/drm/i915/display/intel_dp.c +7 -0
 	struct intel_dp_link_config link_config;
 	struct intel_dp_link_caps_iter iter;
 	bool found = false;
@@ -3382,6 +3393,24 @@ static bool can_enable_drrs(struct
 intel_connector *connector,
 		intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS;
 }
 
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+

drivers/gpu/drm/i915/display/intel_dp.c static bool can_enable_drrs(struct · line 3413

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10 -0
+	if (!m_n || !m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}

Could we reuse a small helper here, since the DIV_ROUND_UP(link_m, link_n) <= max check appears to duplicate intel_dp_can_support_m_n? Also, are the !m_n and !m_n->link_n checks necessary, given that callers pass struct members and link_n is fixed at 0x80000? Could the parameters be const as well? Finally, would it make sense to place this helper next to intel_dp_can_support_m_n ?

drivers/gpu/drm/i915/display/intel_dp.c intel_dp_drrs_compute_config(struct intel_connector *connector, · line 3452

Quoted 11 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+
 static void
 intel_dp_drrs_compute_config(struct intel_connector *connector,

struct intel_crtc_state *pipe_config, @@ -3420,6
+3449,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
intel_dp_bw_fec_overhead(pipe_config-

Quoted 1 line

fec_enable),

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 			       &pipe_config->dp_m2_n2);
 
+	intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m2_n2);

Could we drop this check since dp_m2_n2 is computed using the same port_clock and its ratio should already be covered by the dp_m_n check? Or is this intended as a defensive check?

Quoted 54 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+
 	/* FIXME: abstract this better */
 	if (pipe_config->splitter.enable)
 		pipe_config->dp_m2_n2.data_m *= pipe_config-
Quoted 1 line

splitter.link_count; @@ -3739,6 +3770,8 @@

intel_dp_compute_config(struct intel_atomic_state *state,

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config-
Quoted 1 line

fec_enable),

drivers/gpu/drm/i915/display/intel_dp.c +2 -0
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config-
Quoted 1 line

dp_m_n);

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state); diff --

git a/drivers/gpu/drm/i915/display/intel_dp.h
b/drivers/gpu/drm/i915/display/intel_dp.h
index aa58833a405b..4c975358ab96 100644

drivers/gpu/drm/i915/display/intel_dp.h +1 -0
@@ -26,6 +26,7 @@ struct intel_display;
 struct intel_dp;
 struct intel_dp_link_config;
 struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter; @@ -244,4 +245,7

@@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock); int intel_dp_link_init(struct intel_dp *intel_dp); void intel_dp_link_cleanup(struct intel_dp *intel_dp);

drivers/gpu/drm/i915/display/intel_dp.h +3 -0
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
index 823fe99ca0a1..6d2e234a9e9b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp
 *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);

else
--
2.34.1

#14 lore raw

RE: [PATCH v4 04/10] drm/i915/dp: Add M/N ratio check for DP link config

Quoted 88 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 16 October 2026 00:27
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 04/10] drm/i915/dp: Add M/N ratio check for DP link config

Quoted 32 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 04/10] drm/i915/dp: Add M/N ratio check for DP link config

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous patches only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

This check works off the M/N values as actually computed, which exposes a mismatch with the prediction done while computing the
limits: the pixel clock there is the one before intel_dp_compute_config() divides adjusted_mode-

Quoted 2 lines

crtc_clock by the MSO link count. Divide in the prediction too, so both

Quoted 7 lines

agree. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on

every iteration.

Quoted 33 lines

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre) -Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it. (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 37 +++++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 +++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 41 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
index f6a2152c4432..fbfc00101886 100644
@@ -1294,6 +1294,14 @@ intel_dp_can_support_m_n(struct intel_display
 *display,
 	return m_n_ratio <= max_m_n_ratio;
 }
 
Quoted 12 lines

drivers/gpu/drm/i915/display/intel_dp.c intel_dp_can_support_m_n(struct intel_display *display, · line 1304

Quoted 7 lines
drivers/gpu/drm/i915/display/intel_dp.c +7 -0
+static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int
+pixel_clock) {
+	if (!intel_dp->mso_link_count)
+		return pixel_clock;
+
+	return pixel_clock / intel_dp->mso_link_count; }
+

These hunks fix the prediction added in "drm/i915/dp: Limit M/N ratio for DP SST". On its own that patch over-restricts MSO eDP by mso_link_count . Please squash them, together with the MSO/joiner explanation, into that patch so it is correct on its own, and keep this patch to the debug check.

Sure

Quoted 55 lines
Quoted 39 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 static
 bool intel_dp_can_join(struct intel_dp *intel_dp,
 		       int num_joined_pipes)
@@ -1332,6 +1340,7 @@ bool intel_dp_dotclk_valid(struct intel_display
 *display,  bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int
 pixel_clock)  {
 	struct intel_display *display = to_intel_display(intel_dp);
+	int m_n_pixel_clock = intel_dp_mso_pixel_clock(intel_dp,
 pixel_clock);
 	struct intel_dp_link_caps_order order = {
 		.key = INTEL_DP_LINK_CAPS_ORDER_KEY_RATE_LANE,
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
 		.dir = INTEL_DP_LINK_CAPS_ORDER_DIR_DESC,
@@ -1343,7 +1352,8 @@ bool intel_dp_mode_valid_m_n(struct intel_dp
 *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, pixel_clock,
 link_config.rate)) {
+		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+					     link_config.rate)) {
 			found = true;
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
 			break;
@@ -2723,7 +2733,8 @@ intel_dp_compute_m_n_ratio_limits(struct
 intel_dp *intel_dp,
 	struct intel_dp_link_caps_order order =
 		intel_dp_link_caps_connector_compute_order(connector);
 	struct intel_dp_link_caps_filter new_filter =
 INTEL_DP_LINK_CAPS_FILTER_NONE;
-	int pixel_clock = intel_dp_mode_clock(crtc_state, conn_state);
+	int pixel_clock = intel_dp_mso_pixel_clock(intel_dp,
+
 intel_dp_mode_clock(crtc_state, conn_state));
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 	struct intel_dp_link_config link_config;
 	struct intel_dp_link_caps_iter iter;
 	bool found = false;

drivers/gpu/drm/i915/display/intel_dp.c static bool can_enable_drrs(struct · line 3394

Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
@@ -3382,6 +3393,24 @@ static bool can_enable_drrs(struct
 intel_connector *connector,
 		intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS;

}

Quoted 13 lines
drivers/gpu/drm/i915/display/intel_dp.c +12 -0
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+
+	if (!m_n || !m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
Quoted 8 lines

drivers/gpu/drm/i915/display/intel_dp.c static bool can_enable_drrs(struct intel_connector *connector, · line 3412

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp.c +5 -0
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}

Could we reuse a small helper here, since the DIV_ROUND_UP(link_m, link_n) <= max check appears to duplicate intel_dp_can_support_m_n?

I can do that.

Quoted 3 lines

Also,
are the !m_n and !m_n->link_n checks necessary, given that callers pass struct members and link_n is fixed at 0x80000?

Sure will drop the check

Could the parameters be

Quoted 1 line

const as well?

Finally, would it make sense to place this helper next to

Quoted 1 line

intel_dp_can_support_m_n ?

Can do

Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+
 static void
 intel_dp_drrs_compute_config(struct intel_connector *connector,
 			     struct intel_crtc_state *pipe_config, @@ -3420,6
+3449,8 @@ intel_dp_drrs_compute_config(struct intel_connector

*connector,
intel_dp_bw_fec_overhead(pipe_config-

Quoted 8 lines

drivers/gpu/drm/i915/display/intel_dp.c intel_dp_drrs_compute_config(struct intel_connector *connector, · line 3452

Quoted 4 lines
Quoted 1 line

fec_enable),

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 			       &pipe_config->dp_m2_n2);
 
+	intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m2_n2);

Could we drop this check since dp_m2_n2 is computed using the same port_clock and its ratio should already be covered by the dp_m_n check? Or is this intended as a defensive check?

Sure will drop it.

Quoted 54 lines

drivers/gpu/drm/i915/display/intel_dp_mst.c int intel_dp_mtp_tu_compute_config(struct

Quoted 42 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
+
 	/* FIXME: abstract this better */
 	if (pipe_config->splitter.enable)
 		pipe_config->dp_m2_n2.data_m *= pipe_config-
Quoted 1 line

splitter.link_count; @@ -3739,6 +3770,8 @@

intel_dp_compute_config(struct intel_atomic_state *state,

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config-
Quoted 1 line

fec_enable),

drivers/gpu/drm/i915/display/intel_dp.c +2 -0
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config-
Quoted 1 line

dp_m_n);

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state); diff --

git a/drivers/gpu/drm/i915/display/intel_dp.h
b/drivers/gpu/drm/i915/display/intel_dp.h
index aa58833a405b..4c975358ab96 100644

drivers/gpu/drm/i915/display/intel_dp.h +1 -0
@@ -26,6 +26,7 @@ struct intel_display;  struct intel_dp;  struct
 intel_dp_link_config;  struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter; @@ -244,4 +245,7

@@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock); int intel_dp_link_init(struct intel_dp *intel_dp); void intel_dp_link_cleanup(struct intel_dp *intel_dp);

drivers/gpu/drm/i915/display/intel_dp.h +3 -0
+void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
+			      struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 823fe99ca0a1..6d2e234a9e9b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct

intel_dp

Quoted 11 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
 *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);

else
--
2.34.1

#15 lore raw

PATCH v4 5/10 drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

LINK_N register has bits 31:24 for extended link N value used for HDMI2.1 and for an alternate mode of operation of DP TG DDA.

Add support for these extra bits.

For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK (bits 31:24) is used to handle the extended link N bits. For older platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the standard link N bits. This distinction ensures clarity and maintains the semantics for platforms that support the extended bits. In subsequent changes the logic is updated to conditionally apply the extended link N bits.

v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
v5: Drop a stale changelog entry, the DISPLAY_VER split here is
intentional. (Sashiko)

Bspec:50488

---
 drivers/gpu/drm/i915/display/intel_display.c   | 18 ++++++++++++++++--
 .../gpu/drm/i915/display/intel_display_regs.h  |  2 ++
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -2
index c53163d7c082..6d2025e10995 100644
@@ -2711,14 +2711,22 @@ void intel_set_m_n(struct intel_display *display,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
+	u32 link_n = m_n->link_n;
+
 	intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m);
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
+
+	if (DISPLAY_VER(display) >= 14)
+		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		link_n &= DATA_LINK_M_N_MASK;
+
 	/*
 	 * On BDW+ writing LINK_N arms the double buffered update
 	 * of all the M/N registers, so it must be written last.
 	 */
-	intel_de_write(display, link_n_reg, m_n->link_n);
+	intel_de_write(display, link_n_reg, link_n);
 }
 
 bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
@@ -3475,7 +3483,13 @@ void intel_get_m_n(struct intel_display *display,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
 	m_n->link_m = intel_de_read(display, link_m_reg) & DATA_LINK_M_N_MASK;
-	m_n->link_n = intel_de_read(display, link_n_reg) & DATA_LINK_M_N_MASK;
+	m_n->link_n = intel_de_read(display, link_n_reg);
+
+	if (DISPLAY_VER(display) >= 14)
+		m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		m_n->link_n &= DATA_LINK_M_N_MASK;
+
 	m_n->data_m = intel_de_read(display, data_m_reg) & DATA_LINK_M_N_MASK;
 	m_n->data_n = intel_de_read(display, data_n_reg) & DATA_LINK_M_N_MASK;
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
drivers/gpu/drm/i915/display/intel_display_regs.h +2 -0
index 8251ec15190b..57f388c958b4 100644
@@ -1190,6 +1190,8 @@
 
 #define _PIPEA_LINK_N1		0x60044
 #define _PIPEB_LINK_N1		0x61044
+#define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
+#define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
Signature · 1 line
2.34.1
Reviewed-by on v4 5/10
#16 lore raw

RE: [PATCH v4 05/10] drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

Quoted 94 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 05/10] drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

From: Ankit Nautiyal <[email protected]>

LINK_N register has bits 31:24 for extended link N value used for HDMI2.1 and for an alternate mode of operation of DP TG DDA.

Add support for these extra bits.

For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK (bits 31:24) is used to handle the extended link N bits. For older platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the standard link N bits. This distinction ensures clarity and maintains the semantics for platforms that support the extended bits. In subsequent changes the logic is updated to conditionally apply the extended link N bits.

v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
v5: Drop a stale changelog entry, the DISPLAY_VER split here is
intentional. (Sashiko)

Bspec:50488

---
 drivers/gpu/drm/i915/display/intel_display.c   | 18 ++++++++++++++++--
 .../gpu/drm/i915/display/intel_display_regs.h  |  2 ++
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +9 -1
index c53163d7c082..6d2025e10995 100644
@@ -2711,14 +2711,22 @@ void intel_set_m_n(struct intel_display *display,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)  {
+	u32 link_n = m_n->link_n;
+
 	intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n-
 >data_m);
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
+
+	if (DISPLAY_VER(display) >= 14)
+		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		link_n &= DATA_LINK_M_N_MASK;
+
 	/*
 	 * On BDW+ writing LINK_N arms the double buffered update
 	 * of all the M/N registers, so it must be written last.
 	 */
-	intel_de_write(display, link_n_reg, m_n->link_n);
+	intel_de_write(display, link_n_reg, link_n);
 }
 
 bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display, @@ -

3475,7 +3483,13 @@ void intel_get_m_n(struct intel_display *display,

drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)  {
 	m_n->link_m = intel_de_read(display, link_m_reg) &

DATA_LINK_M_N_MASK;

drivers/gpu/drm/i915/display/intel_display.c +0 -1
-	m_n->link_n = intel_de_read(display, link_n_reg) &

DATA_LINK_M_N_MASK;

drivers/gpu/drm/i915/display/intel_display.c +7 -0
+	m_n->link_n = intel_de_read(display, link_n_reg);
+
+	if (DISPLAY_VER(display) >= 14)
+		m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		m_n->link_n &= DATA_LINK_M_N_MASK;
+
 	m_n->data_m = intel_de_read(display, data_m_reg) &

DATA_LINK_M_N_MASK;
m_n->data_n = intel_de_read(display, data_n_reg) &
DATA_LINK_M_N_MASK;
m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display,
data_m_reg)) + 1; diff --git a/drivers/gpu/drm/i915/display/intel_display_regs.h b/drivers/gpu/drm/i915/display/intel_display_regs.h
index 8251ec15190b..57f388c958b4 100644

drivers/gpu/drm/i915/display/intel_display_regs.h line 1195

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display_regs.h +2 -0
@@ -1190,6 +1190,8 @@
 
 #define _PIPEA_LINK_N1		0x60044
 #define _PIPEB_LINK_N1		0x61044
+#define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
+#define  PIPE_LINK_N1_EXTENDED(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))

LGTM

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display_regs.h +0 -0
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran,
 _PIPEA_LINK_N1)

#define _PIPEA_LINK_M2 0x60048
--
2.34.1

#17 lore raw

PATCH v4 6/10 drm/i915/display_wa: Add support for Wa_14021768792

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Some BMG ultrajoiner configurations require support for Link M/N ratios between 10.0 and 15.0. This range is not natively supported and requires a workaround.

Wa_14021768792 enables this support by utilizing HDMI_EMP_DATA, CHICKEN_TRANS and the extended bits in the LINK_N register.

Add the necessary logic to enable the workaround on applicable platforms. The underlying mechanism comes from the display C0,
so it is gated on display stepping C0 and later.

v2:
-Don't include i915_drv.h and don't use struct drm_i915_private under display/. Use display->platform.battlemage, which names the affected platform directly, instead of IS_DGFX() combined with a display version check. (Jani)
-Rebase on the reworked display WA framework, where the condition goes directly into the __intel_display_wa() switch.

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 9 +++++++++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display_wa.c +9 -0
index 888676693f5e..7456194216be 100644
@@ -111,6 +111,15 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 		return DISPLAY_VERx100(display) == 3000 ||
 			DISPLAY_VERx100(display) == 2000 ||
 			DISPLAY_VERx100(display) == 1401;
+	/*
+	 * Wa_14021768792:
+	 * Fixes: Limitation of Link M/N ratio > 10 for specific Xe2HPD platforms.
+	 * Workaround: Use HDMI_EMP_DATA, CHICKEN_BITs and extended bits in LINK_N
+	 * registers to support LINK M/N ratios from > 10 but < 15.
+	 */
+	case INTEL_DISPLAY_WA_14021768792:
+		return display->platform.battlemage &&
+			IS_DISPLAY_STEP(display, STEP_C0, STEP_FOREVER);
 	case INTEL_DISPLAY_WA_14025769978:
 		return DISPLAY_VER(display) == 35;
 	case INTEL_DISPLAY_WA_14026643300:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index 425a300840aa..b8f2f9363498 100644
@@ -33,6 +33,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14014143976,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
+	INTEL_DISPLAY_WA_14021768792,
 	INTEL_DISPLAY_WA_14025769978,
 	INTEL_DISPLAY_WA_14026643300,
 	INTEL_DISPLAY_WA_15013987218,
Signature · 1 line
2.34.1
Reviewed-by on v4 6/10
#18 lore raw

RE: [PATCH v4 06/10] drm/i915/display_wa: Add support for Wa_14021768792

Quoted 70 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 06/10] drm/i915/display_wa: Add support for Wa_14021768792

From: Ankit Nautiyal <[email protected]>

Some BMG ultrajoiner configurations require support for Link M/N ratios between 10.0 and 15.0. This range is not natively supported and requires a workaround.

Wa_14021768792 enables this support by utilizing HDMI_EMP_DATA, CHICKEN_TRANS and the extended bits in the LINK_N register.

Add the necessary logic to enable the workaround on applicable platforms. The underlying mechanism comes from the display C0, so it is gated on display stepping C0 and later.

v2:
-Don't include i915_drv.h and don't use struct drm_i915_private under display/. Use display->platform.battlemage, which names the affected platform directly, instead of IS_DGFX() combined with a display version check. (Jani) -Rebase on the reworked display WA framework, where the condition goes directly into the __intel_display_wa() switch.

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 9 +++++++++
drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display_wa.c +3 -0
index 888676693f5e..7456194216be 100644
@@ -111,6 +111,15 @@ bool __intel_display_wa(struct intel_display
 *display, enum intel_display_wa wa,
 		return DISPLAY_VERx100(display) == 3000 ||
 			DISPLAY_VERx100(display) == 2000 ||
 			DISPLAY_VERx100(display) == 1401;
+	/*
+	 * Wa_14021768792:
+	 * Fixes: Limitation of Link M/N ratio > 10 for specific Xe2HPD

platforms.

drivers/gpu/drm/i915/display/intel_display_wa.c +1 -0
+	 * Workaround: Use HDMI_EMP_DATA, CHICKEN_BITs and extended

bits in LINK_N

drivers/gpu/drm/i915/display/intel_display_wa.c +5 -0
+	 * registers to support LINK M/N ratios from > 10 but < 15.
+	 */
+	case INTEL_DISPLAY_WA_14021768792:
+		return display->platform.battlemage &&
+			IS_DISPLAY_STEP(display, STEP_C0, STEP_FOREVER);
 	case INTEL_DISPLAY_WA_14025769978:
 		return DISPLAY_VER(display) == 35;
 	case INTEL_DISPLAY_WA_14026643300:
drivers/gpu/drm/i915/display/intel_display_wa.h +0 -0
index 425a300840aa..b8f2f9363498 100644

drivers/gpu/drm/i915/display/intel_display_wa.h enum intel_display_wa { · line 36

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
@@ -33,6 +33,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14014143976,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
+	INTEL_DISPLAY_WA_14021768792,

LGTM

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display_wa.h +0 -1
 	INTEL_DISPLAY_WA_14025769978,
 	INTEL_DISPLAY_WA_14026643300,
 	INTEL_DISPLAY_WA_15013987218,
--

2.34.1

#19 lore raw

PATCH v4 7/10 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n structure.

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N, since writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is enabled. Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied or not.

Unlike the rest of the M/N registers, CHICKEN_TRANS and HDMI_EMP_DATA are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in intel_get_m_n():
it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c  | 93 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |  2 +
 .../gpu/drm/i915/display/intel_display_regs.h | 10 ++
 .../drm/i915/display/intel_display_types.h    |  2 +
 4 files changed, 102 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +88 -5
index 6d2025e10995..1e9d8943626a 100644
@@ -2706,6 +2706,15 @@ void intel_zero_m_n(struct intel_link_m_n *m_n)
 	m_n->tu = 1;
 }
 
+static u8 bmg_get_link_n_ext(const struct intel_link_m_n *m_n)
+{
+	if (!m_n->link_n)
+		return 0;
+
+	return PIPE_LINK_N1_EXT_INT(m_n->link_m / m_n->link_n) |
+		PIPE_LINK_N1_EXT_CEIL(DIV_ROUND_UP(m_n->link_m, m_n->link_n));
+}
+
 void intel_set_m_n(struct intel_display *display,
 		   const struct intel_link_m_n *m_n,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
@@ -2717,7 +2726,9 @@ void intel_set_m_n(struct intel_display *display,
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
 
-	if (DISPLAY_VER(display) >= 14)
+	if (DISPLAY_VER(display) >= 14 && m_n->bypass_m_n_ratio_limit)
+		link_n |= PIPE_LINK_N1_EXTENDED(bmg_get_link_n_ext(m_n));
+	else if (DISPLAY_VER(display) >= 14)
 		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
 	else
 		link_n &= DATA_LINK_M_N_MASK;
@@ -2738,6 +2749,26 @@ bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
 	return IS_DISPLAY_VER(display, 5, 7) || display->platform.cherryview;
 }
 
+static void bmg_enhanced_tgdda_write(struct intel_crtc *crtc,
+				     enum transcoder transcoder,
+				     const struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc);
+	bool enable = m_n->bypass_m_n_ratio_limit && m_n->link_n;
+	u32 link_m_frac = enable ? m_n->link_m % m_n->link_n : 0;
+
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return;
+
+	intel_de_rmw(display, HDMI_EMP_DATA(display, transcoder),
+		     HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+		     REG_FIELD_PREP(HDMI_EMP_DATA_LINK_M_FRAC_MASK, link_m_frac));
+
+	intel_de_rmw(display, CHICKEN_TRANS(display, transcoder),
+		     DP_ENHANCED_TGDDA_ENABLE,
+		     enable ? DP_ENHANCED_TGDDA_ENABLE : 0);
+}
+
 void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    const struct intel_link_m_n *m_n)
@@ -2745,6 +2776,8 @@ void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 	struct intel_display *display = to_intel_display(crtc);
 	enum pipe pipe = crtc->pipe;
 
+	bmg_enhanced_tgdda_write(crtc, transcoder, m_n);
+
 	if (DISPLAY_VER(display) >= 5)
 		intel_set_m_n(display, m_n,
 			      PIPE_DATA_M1(display, transcoder),
@@ -3495,6 +3528,49 @@ void intel_get_m_n(struct intel_display *display,
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
 }
 
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio,
+					enum pipe pipe)
+{
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return false;
+
+	if (m_n_ratio > 15)
+		return false;
+
+	if (pipe != PIPE_A)
+		return false;
+
+	return true;
+}
+
+static void bmg_enhanced_tgdda_read(struct intel_crtc *crtc,
+				    enum transcoder transcoder,
+				    struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc);
+	u32 link_m_frac;
+	int m_n_ratio;
+
+	if (!m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
+	if (!intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc->pipe))
+		return;
+
+	if (!(intel_de_read(display, CHICKEN_TRANS(display, transcoder)) &
+	      DP_ENHANCED_TGDDA_ENABLE))
+		return;
+
+	link_m_frac = REG_FIELD_GET(HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+				    intel_de_read(display, HDMI_EMP_DATA(display, transcoder)));
+
+	if (link_m_frac == m_n->link_m % m_n->link_n)
+		m_n->bypass_m_n_ratio_limit = true;
+}
+
 void intel_cpu_transcoder_get_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    struct intel_link_m_n *m_n)
@@ -3512,6 +3588,8 @@ void intel_cpu_transcoder_get_m1_n1(struct intel_crtc *crtc,
 		intel_get_m_n(display, m_n,
 			      PIPE_DATA_M_G4X(pipe), PIPE_DATA_N_G4X(pipe),
 			      PIPE_LINK_M_G4X(pipe), PIPE_LINK_N_G4X(pipe));
+
+	bmg_enhanced_tgdda_read(crtc, transcoder, m_n);
 }
 
 void intel_cpu_transcoder_get_m2_n2(struct intel_crtc *crtc,
@@ -5002,7 +5080,8 @@ intel_compare_link_m_n(const struct intel_link_m_n *m_n,
 		m_n->data_m == m2_n2->data_m &&
 		m_n->data_n == m2_n2->data_n &&
 		m_n->link_m == m2_n2->link_m &&
-		m_n->link_n == m2_n2->link_n;
+		m_n->link_n == m2_n2->link_n &&
+		m_n->bypass_m_n_ratio_limit == m2_n2->bypass_m_n_ratio_limit;
 }
 
 static bool
@@ -5277,18 +5356,20 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 	if (!intel_compare_link_m_n(&current_config->name, \
 				    &pipe_config->name)) { \
 		pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \
-				     "(expected tu %i data %i/%i link %i/%i, " \
-				     "found tu %i, data %i/%i link %i/%i)", \
+				     "(expected tu %i data %i/%i link %i/%i m_n_bypass %s, " \
+				     "found tu %i, data %i/%i link %i/%i m_n_bypass %s)", \
 				     current_config->name.tu, \
 				     current_config->name.data_m, \
 				     current_config->name.data_n, \
 				     current_config->name.link_m, \
 				     current_config->name.link_n, \
+				     str_yes_no(current_config->name.bypass_m_n_ratio_limit), \
 				     pipe_config->name.tu, \
 				     pipe_config->name.data_m, \
 				     pipe_config->name.data_n, \
 				     pipe_config->name.link_m, \
-				     pipe_config->name.link_n); \
+				     pipe_config->name.link_n, \
+				     str_yes_no(pipe_config->name.bypass_m_n_ratio_limit)); \
 		ret = false; \
 	} \
 } while (0)
@@ -5436,6 +5517,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_M_N(dp_m2_n2);
 	}
 
+	PIPE_CONF_CHECK_BOOL(dp_m_n.bypass_m_n_ratio_limit);
+
 	PIPE_CONF_CHECK_X(output_types);
 
 	PIPE_CONF_CHECK_I(framestart_delay);
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index 404168f4213b..55e676655120 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
 void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum pipe pipe);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +10 -0
index 57f388c958b4..81f9661357b6 100644
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv, (trans), _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display), (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)		_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)
 #define   PORTB_HOTPLUG_INT_EN			(1 << 29)
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index a5f18ac8a7d0..7a5286db977e 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
Signature · 1 line
2.34.1
#20 lore raw

Re: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] drm/i915/display: TGDDA workaround state leaks to HDMI modesets --

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] drm/i915/display: TGDDA workaround state leaks to HDMI modesets --

commit 7ca764c5b58c7f2901c9b7de8005ba2561ae1426
Author: Ankit Nautiyal <[email protected]>

drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 6d2025e109956..1e9d8943626a7 100644

[ ... ]

Quoted 28 lines
drivers/gpu/drm/i915/display/intel_display.c +20 -0
@@ -2738,6 +2749,26 @@ bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
 	return IS_DISPLAY_VER(display, 5, 7) || display->platform.cherryview;
 }
 
+static void bmg_enhanced_tgdda_write(struct intel_crtc *crtc,
+				     enum transcoder transcoder,
+				     const struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc);
+	bool enable = m_n->bypass_m_n_ratio_limit && m_n->link_n;
+	u32 link_m_frac = enable ? m_n->link_m % m_n->link_n : 0;
+
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return;
+
+	intel_de_rmw(display, HDMI_EMP_DATA(display, transcoder),
+		     HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+		     REG_FIELD_PREP(HDMI_EMP_DATA_LINK_M_FRAC_MASK, link_m_frac));
+
+	intel_de_rmw(display, CHICKEN_TRANS(display, transcoder),
+		     DP_ENHANCED_TGDDA_ENABLE,
+		     enable ? DP_ENHANCED_TGDDA_ENABLE : 0);
+}
+
 void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    const struct intel_link_m_n *m_n)

drivers/gpu/drm/i915/display/intel_display.c void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc, · line 2781

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +2 -0
@@ -2745,6 +2776,8 @@ void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 	struct intel_display *display = to_intel_display(crtc);
 	enum pipe pipe = crtc->pipe;
 
+	bmg_enhanced_tgdda_write(crtc, transcoder, m_n);
+
 	if (DISPLAY_VER(display) >= 5)

[Severity: Medium]
The commit message states that CHICKEN_TRANS and HDMI_EMP_DATA "are explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset." Does this clearing logic work if the transcoder is repurposed for HDMI?

The clearing logic is placed in bmg_enhanced_tgdda_write(), which is called exclusively from intel_cpu_transcoder_set_m1_n1().

Looking at hsw_configure_cpu_transcoder(), intel_cpu_transcoder_set_m1_n1() is only called for DP and FDI encoders:

    } else if (intel_crtc_has_dp_encoder(crtc_state)) {
        intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder,
                                       &crtc_state->dp_m_n);
        intel_cpu_transcoder_set_m2_n2(crtc, cpu_transcoder,
                                       &crtc_state->dp_m2_n2);
    }

If a transcoder is first used for DisplayPort (triggering the workaround and setting DP_ENHANCED_TGDDA_ENABLE) and subsequently repurposed for HDMI, intel_cpu_transcoder_set_m1_n1() is completely skipped.

Will the Transcoder's Timing Generator DDA remain in the enhanced DP workaround mode and potentially corrupt HDMI timings?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
#21 lore raw

RE: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

Quoted 61 lines
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 6d2025e109956..1e9d8943626a7 100644

[ ... ]

drivers/gpu/drm/i915/display/intel_display.c bool intel_cpu_transcoder_has_m2_n2(struct

Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +0 -0
@@ -2738,6 +2749,26 @@ bool intel_cpu_transcoder_has_m2_n2(struct

intel_display *display,

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +3 -0
 	return IS_DISPLAY_VER(display, 5, 7) ||
 display->platform.cherryview;  }
 
+static void bmg_enhanced_tgdda_write(struct intel_crtc *crtc,
+				     enum transcoder transcoder,
+				     const struct intel_link_m_n *m_n) {

drivers/gpu/drm/i915/display/intel_display.c bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10 -0
+	struct intel_display *display = to_intel_display(crtc);
+	bool enable = m_n->bypass_m_n_ratio_limit && m_n->link_n;
+	u32 link_m_frac = enable ? m_n->link_m % m_n->link_n : 0;
+
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return;
+
+	intel_de_rmw(display, HDMI_EMP_DATA(display, transcoder),
+		     HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+		     REG_FIELD_PREP(HDMI_EMP_DATA_LINK_M_FRAC_MASK,

link_m_frac));

drivers/gpu/drm/i915/display/intel_display.c bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +5 -0
+
+	intel_de_rmw(display, CHICKEN_TRANS(display, transcoder),
+		     DP_ENHANCED_TGDDA_ENABLE,
+		     enable ? DP_ENHANCED_TGDDA_ENABLE : 0); }
+
 void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    const struct intel_link_m_n *m_n) @@ -

2745,6 +2776,8 @@ void

drivers/gpu/drm/i915/display/intel_display.c void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc, · line 2781

Quoted 7 lines

intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,

drivers/gpu/drm/i915/display/intel_display.c +2 -0
 	struct intel_display *display = to_intel_display(crtc);
 	enum pipe pipe = crtc->pipe;
 
+	bmg_enhanced_tgdda_write(crtc, transcoder, m_n);
+
 	if (DISPLAY_VER(display) >= 5)

[Severity: Medium]
The commit message states that CHICKEN_TRANS and HDMI_EMP_DATA "are explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset." Does this clearing logic work if the transcoder is repurposed for HDMI?

The clearing logic is placed in bmg_enhanced_tgdda_write(), which is called exclusively from intel_cpu_transcoder_set_m1_n1().

Looking at hsw_configure_cpu_transcoder(), intel_cpu_transcoder_set_m1_n1() is only called for DP and FDI encoders:

    } else if (intel_crtc_has_dp_encoder(crtc_state)) {
        intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder,
                                       &crtc_state->dp_m_n);
        intel_cpu_transcoder_set_m2_n2(crtc, cpu_transcoder,
                                       &crtc_state->dp_m2_n2);
    }
Quoted 8 lines

If a transcoder is first used for DisplayPort (triggering the workaround and setting DP_ENHANCED_TGDDA_ENABLE) and subsequently repurposed for HDMI,
intel_cpu_transcoder_set_m1_n1() is completely skipped.

Will the Transcoder's Timing Generator DDA remain in the enhanced DP workaround mode and potentially corrupt HDMI timings?

Nothing to corrupt though. Bit 11 is only applicable to the DP transcoder, and HDMI_EMP_DATA only matters when EMP transmission is enabled via HDMI_EMP_CTL, which we never do - there's no FRL/EMP support in the driver.
It isn't observable in software either, intel_cpu_transcoder_get_m1_n1() is only called from the DP and DP MST readout paths, so a stale bit never reaches the crtc state. And the next DP modeset on that transcoder clears it anyway.

Regards,
Suraj Kandpal

Quoted 3 lines

--
Sashiko AI review · https://sashiko.dev/#/patchset/20260917050649.871960-1-
[email protected]?part=7

#22 lore raw

RE: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

In reply to Suraj Kandpal
Quoted 138 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n structure.

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N, since writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is enabled. Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied or not.

Unlike the rest of the M/N registers, CHICKEN_TRANS and HDMI_EMP_DATA are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in intel_get_m_n():
it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c  | 93 ++++++++++++++++++-
drivers/gpu/drm/i915/display/intel_display.h  |  2 +
.../gpu/drm/i915/display/intel_display_regs.h | 10 ++
 .../drm/i915/display/intel_display_types.h    |  2 +
 4 files changed, 102 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -0
index 6d2025e10995..1e9d8943626a 100644
@@ -2706,6 +2706,15 @@ void intel_zero_m_n(struct intel_link_m_n *m_n)
 	m_n->tu = 1;
 }
 
+static u8 bmg_get_link_n_ext(const struct intel_link_m_n *m_n) {
+	if (!m_n->link_n)
+		return 0;
+
+	return PIPE_LINK_N1_EXT_INT(m_n->link_m / m_n->link_n) |
+		PIPE_LINK_N1_EXT_CEIL(DIV_ROUND_UP(m_n->link_m,
 m_n->link_n)); }
+
 void intel_set_m_n(struct intel_display *display,
 		   const struct intel_link_m_n *m_n,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg, @@ -

2717,7 +2726,9 @@ void intel_set_m_n(struct intel_display *display,

drivers/gpu/drm/i915/display/intel_display.c +2 -1
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
 
-	if (DISPLAY_VER(display) >= 14)
+	if (DISPLAY_VER(display) >= 14 && m_n->bypass_m_n_ratio_limit)
+		link_n |=

PIPE_LINK_N1_EXTENDED(bmg_get_link_n_ext(m_n));

drivers/gpu/drm/i915/display/intel_display.c +19 -0
+	else if (DISPLAY_VER(display) >= 14)
 		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
 	else
 		link_n &= DATA_LINK_M_N_MASK;
@@ -2738,6 +2749,26 @@ bool intel_cpu_transcoder_has_m2_n2(struct
 intel_display *display,
 	return IS_DISPLAY_VER(display, 5, 7) || display->platform.cherryview;
 }
 
+static void bmg_enhanced_tgdda_write(struct intel_crtc *crtc,
+				     enum transcoder transcoder,
+				     const struct intel_link_m_n *m_n) {
+	struct intel_display *display = to_intel_display(crtc);
+	bool enable = m_n->bypass_m_n_ratio_limit && m_n->link_n;
+	u32 link_m_frac = enable ? m_n->link_m % m_n->link_n : 0;
+
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return;
+
+	intel_de_rmw(display, HDMI_EMP_DATA(display, transcoder),
+		     HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+		     REG_FIELD_PREP(HDMI_EMP_DATA_LINK_M_FRAC_MASK,
 link_m_frac));
+
+	intel_de_rmw(display, CHICKEN_TRANS(display, transcoder),
+		     DP_ENHANCED_TGDDA_ENABLE,
+		     enable ? DP_ENHANCED_TGDDA_ENABLE : 0); }
+
 void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    const struct intel_link_m_n *m_n) @@ -

2745,6 +2776,8 @@ void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,

drivers/gpu/drm/i915/display/intel_display.c +3 -0
 	struct intel_display *display = to_intel_display(crtc);
 	enum pipe pipe = crtc->pipe;
 
+	bmg_enhanced_tgdda_write(crtc, transcoder, m_n);
+
 	if (DISPLAY_VER(display) >= 5)
 		intel_set_m_n(display, m_n,
 			      PIPE_DATA_M1(display, transcoder), @@ -3495,6
+3528,49 @@ void intel_get_m_n(struct intel_display *display,
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display,

data_m_reg)) + 1; }

drivers/gpu/drm/i915/display/intel_display.c +2 -0
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio,

drivers/gpu/drm/i915/display/intel_display.c void intel_get_m_n(struct intel_display *display, · line 3542

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10 -0
+					enum pipe pipe)
+{
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return false;
+
+	if (m_n_ratio > 15)
+		return false;
+
+	if (pipe != PIPE_A)
+		return false;

Could we check whether this should use the transcoder (TRANSCODER_A) instead of crtc->pipe ? For ultrajoiner, could the secondary pipes report bypass=false even though their computed state, copied from the primary, has bypass=true ?

Quoted 90 lines
drivers/gpu/drm/i915/display/intel_display.c +18 -0
+
+	return true;
+}
+
+static void bmg_enhanced_tgdda_read(struct intel_crtc *crtc,
+				    enum transcoder transcoder,
+				    struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc);
+	u32 link_m_frac;
+	int m_n_ratio;
+
+	if (!m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
+	if (!intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc-
Quoted 1 line

pipe))

drivers/gpu/drm/i915/display/intel_display.c +7 -0
+		return;
+
+	if (!(intel_de_read(display, CHICKEN_TRANS(display, transcoder)) &
+	      DP_ENHANCED_TGDDA_ENABLE))
+		return;
+
+	link_m_frac =

REG_FIELD_GET(HDMI_EMP_DATA_LINK_M_FRAC_MASK,

drivers/gpu/drm/i915/display/intel_display.c +1 -0
+				    intel_de_read(display,

HDMI_EMP_DATA(display, transcoder)));

drivers/gpu/drm/i915/display/intel_display.c +7 -0
+
+	if (link_m_frac == m_n->link_m % m_n->link_n)
+		m_n->bypass_m_n_ratio_limit = true;
+}
+
 void intel_cpu_transcoder_get_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    struct intel_link_m_n *m_n)
@@ -3512,6 +3588,8 @@ void intel_cpu_transcoder_get_m1_n1(struct
 intel_crtc *crtc,
 		intel_get_m_n(display, m_n,
 			      PIPE_DATA_M_G4X(pipe),
 PIPE_DATA_N_G4X(pipe),
 			      PIPE_LINK_M_G4X(pipe),
 PIPE_LINK_N_G4X(pipe));
+
+	bmg_enhanced_tgdda_read(crtc, transcoder, m_n);

}

void intel_cpu_transcoder_get_m2_n2(struct intel_crtc *crtc, @@ -5002,7
+5080,8 @@ intel_compare_link_m_n(const struct intel_link_m_n *m_n,

drivers/gpu/drm/i915/display/intel_display.c +2 -1
 		m_n->data_m == m2_n2->data_m &&
 		m_n->data_n == m2_n2->data_n &&
 		m_n->link_m == m2_n2->link_m &&
-		m_n->link_n == m2_n2->link_n;
+		m_n->link_n == m2_n2->link_n &&
+		m_n->bypass_m_n_ratio_limit == m2_n2-
Quoted 1 line

bypass_m_n_ratio_limit;

}

static bool

drivers/gpu/drm/i915/display/intel_display.c +5 -3
@@ -5277,18 +5356,20 @@ intel_pipe_config_compare(const struct
 intel_crtc_state *current_config,
 	if (!intel_compare_link_m_n(&current_config->name, \
 				    &pipe_config->name)) { \
 		pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \
-				     "(expected tu %i data %i/%i link %i/%i, " \
-				     "found tu %i, data %i/%i link %i/%i)", \
+				     "(expected tu %i data %i/%i link %i/%i
 m_n_bypass %s, " \
+				     "found tu %i, data %i/%i link %i/%i
 m_n_bypass %s)", \
 				     current_config->name.tu, \
 				     current_config->name.data_m, \
 				     current_config->name.data_n, \
 				     current_config->name.link_m, \
 				     current_config->name.link_n, \
+				     str_yes_no(current_config-
 >name.bypass_m_n_ratio_limit), \
 				     pipe_config->name.tu, \
 				     pipe_config->name.data_m, \
 				     pipe_config->name.data_n, \
 				     pipe_config->name.link_m, \
-				     pipe_config->name.link_n); \
+				     pipe_config->name.link_n, \
+				     str_yes_no(pipe_config-
Quoted 1 line

name.bypass_m_n_ratio_limit)); \

drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		ret = false; \
 	} \
 } while (0)

drivers/gpu/drm/i915/display/intel_display.c intel_pipe_config_compare(const struct · line 5521

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1 -0
@@ -5436,6 +5517,8 @@ intel_pipe_config_compare(const struct
 intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_M_N(dp_m2_n2);
 	}
 
+	PIPE_CONF_CHECK_BOOL(dp_m_n.bypass_m_n_ratio_limit);

The flag is compared twice. The unconditional BOOL check is enough.

Please also print it in intel_crtc_state_dump().

Quoted 77 lines
drivers/gpu/drm/i915/display/intel_display.c +1 -0
+
 	PIPE_CONF_CHECK_X(output_types);
 
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 	PIPE_CONF_CHECK_I(framestart_delay);
drivers/gpu/drm/i915/display/intel_display.h +0 -0
index 404168f4213b..55e676655120 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct

intel_display *display); int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state); void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,

drivers/gpu/drm/i915/display/intel_display.h +2 -0
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum pipe pipe);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +5 -0
index 57f388c958b4..81f9661357b6 100644
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv, (trans),
 _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display),
 (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)
	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)

#define PORTB_HOTPLUG_INT_EN (1 << 29)

drivers/gpu/drm/i915/display/intel_display_regs.h +4 -0
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))

#define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran,
_PIPEA_LINK_N1)

#define _PIPEA_LINK_M2 0x60048

drivers/gpu/drm/i915/display/intel_display_regs.h +1 -0
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -1
index a5f18ac8a7d0..7a5286db977e 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
--

2.34.1

#23 lore raw

RE: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

Quoted 158 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 16 October 2026 02:08
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

Quoted 10 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

Quoted 7 lines

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in

the WA.

Quoted 5 lines

Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n

structure.

Quoted 5 lines

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N,

since

Quoted 2 lines

writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is

enabled.

Quoted 7 lines

Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied

or not.

Quoted 2 lines

Unlike the rest of the M/N registers, CHICKEN_TRANS and

HDMI_EMP_DATA

Quoted 8 lines

are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in

intel_get_m_n():

drivers/gpu/drm/i915/display/intel_display.c void intel_zero_m_n(struct intel_link_m_n

Quoted 22 lines

it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c  | 93
++++++++++++++++++- drivers/gpu/drm/i915/display/intel_display.h  |  2
+ .../gpu/drm/i915/display/intel_display_regs.h | 10 ++
 .../drm/i915/display/intel_display_types.h    |  2 +
 4 files changed, 102 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 6d2025e10995..1e9d8943626a 100644
@@ -2706,6 +2706,15 @@ void intel_zero_m_n(struct intel_link_m_n

*m_n)

Quoted 67 lines
drivers/gpu/drm/i915/display/intel_display.c +7 -0
 	m_n->tu = 1;
 }
 
+static u8 bmg_get_link_n_ext(const struct intel_link_m_n *m_n) {
+	if (!m_n->link_n)
+		return 0;
+
+	return PIPE_LINK_N1_EXT_INT(m_n->link_m / m_n->link_n) |
+		PIPE_LINK_N1_EXT_CEIL(DIV_ROUND_UP(m_n->link_m,
 m_n->link_n)); }
+
 void intel_set_m_n(struct intel_display *display,
 		   const struct intel_link_m_n *m_n,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg, @@ -

2717,7 +2726,9 @@ void intel_set_m_n(struct intel_display *display,

drivers/gpu/drm/i915/display/intel_display.c +2 -1
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
 
-	if (DISPLAY_VER(display) >= 14)
+	if (DISPLAY_VER(display) >= 14 && m_n->bypass_m_n_ratio_limit)
+		link_n |=

PIPE_LINK_N1_EXTENDED(bmg_get_link_n_ext(m_n));

drivers/gpu/drm/i915/display/intel_display.c +19 -0
+	else if (DISPLAY_VER(display) >= 14)
 		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
 	else
 		link_n &= DATA_LINK_M_N_MASK;
@@ -2738,6 +2749,26 @@ bool intel_cpu_transcoder_has_m2_n2(struct
 intel_display *display,
 	return IS_DISPLAY_VER(display, 5, 7) ||
 display->platform.cherryview; }
 
+static void bmg_enhanced_tgdda_write(struct intel_crtc *crtc,
+				     enum transcoder transcoder,
+				     const struct intel_link_m_n *m_n) {
+	struct intel_display *display = to_intel_display(crtc);
+	bool enable = m_n->bypass_m_n_ratio_limit && m_n->link_n;
+	u32 link_m_frac = enable ? m_n->link_m % m_n->link_n : 0;
+
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return;
+
+	intel_de_rmw(display, HDMI_EMP_DATA(display, transcoder),
+		     HDMI_EMP_DATA_LINK_M_FRAC_MASK,
+		     REG_FIELD_PREP(HDMI_EMP_DATA_LINK_M_FRAC_MASK,
 link_m_frac));
+
+	intel_de_rmw(display, CHICKEN_TRANS(display, transcoder),
+		     DP_ENHANCED_TGDDA_ENABLE,
+		     enable ? DP_ENHANCED_TGDDA_ENABLE : 0); }
+
 void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    const struct intel_link_m_n *m_n) @@ -

2745,6 +2776,8 @@ void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc,

drivers/gpu/drm/i915/display/intel_display.c +3 -0
 	struct intel_display *display = to_intel_display(crtc);
 	enum pipe pipe = crtc->pipe;
 
+	bmg_enhanced_tgdda_write(crtc, transcoder, m_n);
+
 	if (DISPLAY_VER(display) >= 5)
 		intel_set_m_n(display, m_n,
 			      PIPE_DATA_M1(display, transcoder), @@ -3495,6
+3528,49 @@ void intel_get_m_n(struct intel_display *display,
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display,

data_m_reg)) + 1; }

Quoted 15 lines

drivers/gpu/drm/i915/display/intel_display.c void intel_get_m_n(struct intel_display *display, · line 3542

Quoted 12 lines
drivers/gpu/drm/i915/display/intel_display.c +12 -0
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio,
+					enum pipe pipe)
+{
+	if (!intel_display_wa(display, INTEL_DISPLAY_WA_14021768792))
+		return false;
+
+	if (m_n_ratio > 15)
+		return false;
+
+	if (pipe != PIPE_A)
+		return false;

Could we check whether this should use the transcoder (TRANSCODER_A) instead of crtc->pipe ?

Sure will move check t

Quoted 97 lines

For ultrajoiner, could the secondary pipes report bypass=false even though their computed state, copied from the primary, has bypass=true ?

Quoted 94 lines
drivers/gpu/drm/i915/display/intel_display.c +18 -0
+
+	return true;
+}
+
+static void bmg_enhanced_tgdda_read(struct intel_crtc *crtc,
+				    enum transcoder transcoder,
+				    struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc);
+	u32 link_m_frac;
+	int m_n_ratio;
+
+	if (!m_n->link_n)
+		return;
+
+	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
+
+	if (!intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc-
Quoted 1 line

pipe))

drivers/gpu/drm/i915/display/intel_display.c +7 -0
+		return;
+
+	if (!(intel_de_read(display, CHICKEN_TRANS(display, transcoder)) &
+	      DP_ENHANCED_TGDDA_ENABLE))
+		return;
+
+	link_m_frac =

REG_FIELD_GET(HDMI_EMP_DATA_LINK_M_FRAC_MASK,

drivers/gpu/drm/i915/display/intel_display.c +1 -0
+				    intel_de_read(display,

HDMI_EMP_DATA(display, transcoder)));

drivers/gpu/drm/i915/display/intel_display.c +6 -0
+
+	if (link_m_frac == m_n->link_m % m_n->link_n)
+		m_n->bypass_m_n_ratio_limit = true; }
+
 void intel_cpu_transcoder_get_m1_n1(struct intel_crtc *crtc,
 				    enum transcoder transcoder,
 				    struct intel_link_m_n *m_n)
@@ -3512,6 +3588,8 @@ void intel_cpu_transcoder_get_m1_n1(struct
 intel_crtc *crtc,
 		intel_get_m_n(display, m_n,
 			      PIPE_DATA_M_G4X(pipe),
 PIPE_DATA_N_G4X(pipe),
 			      PIPE_LINK_M_G4X(pipe),
 PIPE_LINK_N_G4X(pipe));
+
+	bmg_enhanced_tgdda_read(crtc, transcoder, m_n);

}

void intel_cpu_transcoder_get_m2_n2(struct intel_crtc *crtc, @@
-5002,7
+5080,8 @@ intel_compare_link_m_n(const struct intel_link_m_n *m_n,

drivers/gpu/drm/i915/display/intel_display.c +2 -1
 		m_n->data_m == m2_n2->data_m &&
 		m_n->data_n == m2_n2->data_n &&
 		m_n->link_m == m2_n2->link_m &&
-		m_n->link_n == m2_n2->link_n;
+		m_n->link_n == m2_n2->link_n &&
+		m_n->bypass_m_n_ratio_limit == m2_n2-
Quoted 1 line

bypass_m_n_ratio_limit;

}

static bool

drivers/gpu/drm/i915/display/intel_display.c +5 -3
@@ -5277,18 +5356,20 @@ intel_pipe_config_compare(const struct
 intel_crtc_state *current_config,
 	if (!intel_compare_link_m_n(&current_config->name, \
 				    &pipe_config->name)) { \
 		pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \
-				     "(expected tu %i data %i/%i link %i/%i, " \
-				     "found tu %i, data %i/%i link %i/%i)", \
+				     "(expected tu %i data %i/%i link %i/%i
 m_n_bypass %s, " \
+				     "found tu %i, data %i/%i link %i/%i
 m_n_bypass %s)", \
 				     current_config->name.tu, \
 				     current_config->name.data_m, \
 				     current_config->name.data_n, \
 				     current_config->name.link_m, \
 				     current_config->name.link_n, \
+				     str_yes_no(current_config-
 >name.bypass_m_n_ratio_limit), \
 				     pipe_config->name.tu, \
 				     pipe_config->name.data_m, \
 				     pipe_config->name.data_n, \
 				     pipe_config->name.link_m, \
-				     pipe_config->name.link_n); \
+				     pipe_config->name.link_n, \
+				     str_yes_no(pipe_config-
Quoted 1 line

name.bypass_m_n_ratio_limit)); \

drivers/gpu/drm/i915/display/intel_display.c +0 -0
 		ret = false; \
 	} \
 } while (0)
@@ -5436,6 +5517,8 @@ intel_pipe_config_compare(const struct
 intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_M_N(dp_m2_n2);
 	}
 
Quoted 3 lines

drivers/gpu/drm/i915/display/intel_display.c intel_pipe_config_compare(const struct intel_crtc_state *current_config, · line 5520

Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1 -0
+	PIPE_CONF_CHECK_BOOL(dp_m_n.bypass_m_n_ratio_limit);

The flag is compared twice. The unconditional BOOL check is enough.

Sure will do it

Quoted 2 lines

Please also print it in intel_crtc_state_dump().

Will add it.

Regards,
Suraj Kandpal

Quoted 80 lines
Quoted 26 lines
drivers/gpu/drm/i915/display/intel_display.c +1 -0
+
 	PIPE_CONF_CHECK_X(output_types);
 
drivers/gpu/drm/i915/display/intel_display.c +0 -0
 	PIPE_CONF_CHECK_I(framestart_delay);
drivers/gpu/drm/i915/display/intel_display.h +0 -0
index 404168f4213b..55e676655120 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct

intel_display *display); int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state); void intel_display_compute_link_m_n(u32
*link_m, u32 *link_n,

drivers/gpu/drm/i915/display/intel_display.h +2 -0
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum pipe pipe);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +0 -0
index 57f388c958b4..81f9661357b6 100644

drivers/gpu/drm/i915/display/intel_display_regs.h line 551

Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_regs.h +0 -0
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv,

(trans),

Quoted 51 lines
drivers/gpu/drm/i915/display/intel_display_regs.h +5 -0
 _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display),
 (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)
	_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)

#define PORTB_HOTPLUG_INT_EN (1 << 29)

drivers/gpu/drm/i915/display/intel_display_regs.h +4 -0
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)
 	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))  #define

PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)

#define _PIPEA_LINK_M2 0x60048

drivers/gpu/drm/i915/display/intel_display_regs.h +1 -0
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -1
index a5f18ac8a7d0..7a5286db977e 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
--

2.34.1

#24 lore raw

PATCH v4 8/10 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot leave it set for the rate that gets used. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 31 +++++++++++++++++++++----
 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +26 -5
index fbfc00101886..9c327008b733 100644
@@ -3373,6 +3373,9 @@ static bool can_enable_drrs(struct intel_connector *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR
 	 * as it allows more power-savings by complete shutting down display,
@@ -3397,18 +3400,35 @@ void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,
 			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
 	int m_n_ratio;
 
-	if (!m_n || !m_n->link_n)
+	if (!m_n)
+		return;
+
+	m_n->bypass_m_n_ratio_limit = false;
+
+	if (!m_n->link_n)
 		return;
 
 	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc->pipe)) {
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }
 
 static void
@@ -3425,7 +3445,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 
 	if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
Signature · 1 line
2.34.1
#25 lore raw

RE: [PATCH v4 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

Quoted 53 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:

(quoted diff) +0 -2
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot leave it

set for the rate that gets used. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 31 +++++++++++++++++++++----
 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index fbfc00101886..9c327008b733 100644
@@ -3373,6 +3373,9 @@ static bool can_enable_drrs(struct intel_connector
 *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR

* as it allows more power-savings by complete shutting down
display, @@ -3397,18 +3400,35 @@ void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);

drivers/gpu/drm/i915/display/intel_dp.c void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state, · line 3413

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +6 -1
 	int m_n_ratio;
 
-	if (!m_n || !m_n->link_n)
+	if (!m_n)
+		return;
+
+	m_n->bypass_m_n_ratio_limit = false;
+
+	if (!m_n->link_n)
 		return;

Should bypass_m_n_ratio_limit be set where the link M/N and limits are computed, keeping this function log-only? Also, as noted in the previous patch review, could the if (!m_n) check be dead code?

Quoted 13 lines
drivers/gpu/drm/i915/display/intel_dp.c +5 -1
 	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc-
Quoted 1 line

pipe)) {

drivers/gpu/drm/i915/display/intel_dp.c +1 -1
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",

drivers/gpu/drm/i915/display/intel_dp.c void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state, · line 3432

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +8 -1
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }

Could the ratio limit also be adjusted in the prediction and mode validation paths when Wa_14021768792 applies? Otherwise, won't configurations with ratios above 10 be rejected before this workaround can take effect?

Quoted 15 lines

static void

drivers/gpu/drm/i915/display/intel_dp.c +2 -1
@@ -3425,7 +3445,8 @@ intel_dp_drrs_compute_config(struct
 intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 

if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
--
2.34.1

#26 lore raw

RE: [PATCH v4 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

Quoted 69 lines

-----Original Message-----
From: Golani, Mitulkumar Ajitkumar <[email protected]>
Sent: 16 October 2026 01:54
To: Kandpal, Suraj <[email protected]>; [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: RE: [PATCH v4 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

Quoted 54 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Suraj Kandpal
Sent: 17 September 2026 10:37
To: [email protected]; [email protected]
Cc: Nautiyal, Ankit K <[email protected]>; Murthy, Arun R <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v4 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:

(quoted diff) +0 -2
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot

leave it set for the rate that gets used. (Sashiko)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 31
+++++++++++++++++++++----
 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index fbfc00101886..9c327008b733 100644
@@ -3373,6 +3373,9 @@ static bool can_enable_drrs(struct
 intel_connector *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR

* as it allows more power-savings by complete shutting down
display, @@ -3397,18 +3400,35 @@ void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/display/intel_dp.c +1 -0
 			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
 	int m_n_ratio;
Quoted 11 lines

drivers/gpu/drm/i915/display/intel_dp.c void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state, · line 3413

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp.c +6 -1
-	if (!m_n || !m_n->link_n)
+	if (!m_n)
+		return;
+
+	m_n->bypass_m_n_ratio_limit = false;
+
+	if (!m_n->link_n)
 		return;

Should bypass_m_n_ratio_limit be set where the link M/N and limits are computed, keeping this function log-only?

The final link rate isn't known when the limits are computed, the filter only narrows the options. And intel_link_compute_m_n()
has no crtc_state, so I'd rather not put DP/WA logic in there. The check is called right after each DP link M/N compute (SST and MTP), so it's effectively in the same place.

Quoted 2 lines

Also, as noted in the previous
patch review, could the if (!m_n) check be dead code?

Sure will remove that

Quoted 20 lines
Quoted 20 lines
drivers/gpu/drm/i915/display/intel_dp.c +5 -1
 	m_n_ratio = DIV_ROUND_UP(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio, crtc-
Quoted 1 line

pipe)) {

drivers/gpu/drm/i915/display/intel_dp.c +7 -2
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
Quoted 8 lines

drivers/gpu/drm/i915/display/intel_dp.c void intel_dp_check_m_n_ratio(struct intel_crtc_state *crtc_state, · line 3432

Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp.c +2 -0
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }

Could the ratio limit also be adjusted in the prediction and mode validation paths when
Wa_14021768792 applies? Otherwise, won't configurations with ratios above 10 be rejected before this workaround can take effect?

Done in the next patch, which extends intel_dp_can_support_m_n() for the WA. Kept it in that order on purpose so the programming is in place before the filter lets ratios above 10 through, otherwise a bisect could land on a config that's programmed without the WA.

Regards,
Suraj Kandpal

Quoted 16 lines
Quoted 16 lines

static void

drivers/gpu/drm/i915/display/intel_dp.c +2 -1
@@ -3425,7 +3445,8 @@ intel_dp_drrs_compute_config(struct
 intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 

if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
--
2.34.1

#27 lore raw

PATCH v4 9/10 drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

On BMG platforms, the standard M/N ratio limit of 10 can be bypassed under specific conditions, as permitted by hardware capabilities.

Modify the helper intel_dp_can_support_m_n() to account for this by checking whether the platform supports bypassing the limit. The workaround is only intended for 128b/132b links, so restrict it to those.

During the mode_valid phase, the check assumes that PIPE_A will be used, to allow the mode where the M/N ratio is within the limits for the workaround.

v2:
-Keep the helper static: the MST mode_valid now goes through the shared intel_dp_mode_valid_m_n() rather than calling it directly, so it no longer needs to be exported.

---
 drivers/gpu/drm/i915/display/intel_dp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +15 -3
index 9c327008b733..9af525e9b58d 100644
@@ -1277,9 +1277,11 @@ intel_dp_get_max_m_n_ratio(struct intel_display *display)
 
 static bool
 intel_dp_can_support_m_n(struct intel_display *display,
+			 const struct intel_crtc_state *crtc_state,
 			 int pixel_clock, int link_rate)
 {
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	enum pipe pipe = PIPE_A;
 	u32 link_m, link_n;
 	int m_n_ratio;
 
@@ -1291,7 +1293,16 @@ intel_dp_can_support_m_n(struct intel_display *display,
 
 	m_n_ratio = DIV_ROUND_UP(link_m, link_n);
 
-	return m_n_ratio <= max_m_n_ratio;
+	if (m_n_ratio <= max_m_n_ratio)
+		return true;
+
+	if (!drm_dp_is_uhbr_rate(link_rate))
+		return false;
+
+	if (crtc_state)
+		pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
+
+	return intel_display_can_bypass_m_n_limit(display, m_n_ratio, pipe);
 }
 
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
@@ -1352,7 +1363,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+		if (intel_dp_can_support_m_n(display, NULL, m_n_pixel_clock,
 					     link_config.rate)) {
 			found = true;
 
@@ -2741,7 +2752,8 @@ intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
 
 	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits->link_config_filter);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (!intel_dp_can_support_m_n(display, pixel_clock, link_config.rate))
+		if (!intel_dp_can_support_m_n(display, crtc_state, pixel_clock,
+					      link_config.rate))
 			continue;
 
 		intel_dp_link_caps_filter_add(link_caps, &new_filter, &link_config);
Signature · 1 line
2.34.1
#28 lore raw

PATCH v4 10/10 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

In reply to Suraj Kandpal

Starting Xe3p max M/N ratio has been increased to 22.

Bspec: 68922

---
 drivers/gpu/drm/i915/display/intel_dp.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index 9af525e9b58d..2f1b7e481d31 100644
@@ -1269,6 +1269,9 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
+	if (DISPLAY_VER(display) >= 35)
+		return 22;
+
 	if (display->platform.dg2)
 		return 4;
 
Signature · 1 line
2.34.1
#29 lore raw

✓ CI.KUnit: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138256/
State : success

== Summary ==

+ trap cleanup EXIT
+ kunitconfigs=('/kernel/drivers/gpu/tests/.kunitconfig' '/kernel/drivers/gpu/drm/xe/.kunitconfig' '/kernel/drivers/gpu/drm/tests/.kunitconfig' '/kernel/drivers/gpu/drm/ttm/tests/.kunitconfig' '/kernel/drivers/dma-buf/.kunitconfig')
+ for kcfg in "${kunitconfigs[@]}"
+ [[ ! -f /kernel/drivers/gpu/tests/.kunitconfig ]]
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/tests/.kunitconfig
[05:13:46] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[05:13:50] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[05:14:11] Starting KUnit Kernel (1/1)...
[05:14:11] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[05:14:11] ============= refcount_interrupt (4 subtests) ==============
[05:14:11] [PASSED] test_single_irq_change
[05:14:11] [PASSED] test_nested_irq_change
[05:14:11] [PASSED] test_multiple_irq_change
[05:14:11] [PASSED] test_irq_save
[05:14:11] =============== [PASSED] refcount_interrupt ================
[05:14:11] ================= gpu_buddy (14 subtests) ==================
[05:14:11] [PASSED] gpu_test_buddy_alloc_limit
[05:14:11] [PASSED] gpu_test_buddy_alloc_optimistic
[05:14:11] [PASSED] gpu_test_buddy_alloc_pessimistic
[05:14:11] [PASSED] gpu_test_buddy_alloc_pathological
[05:14:11] [PASSED] gpu_test_buddy_alloc_contiguous
[05:14:11] [PASSED] gpu_test_buddy_alloc_clear
[05:14:11] [PASSED] gpu_test_buddy_alloc_range
[05:14:11] [PASSED] gpu_test_buddy_alloc_range_bias
[05:14:12] [PASSED] gpu_test_buddy_fragmentation_performance
[05:14:12] [PASSED] gpu_test_buddy_dirty_tracker_performance
[05:14:12] [PASSED] gpu_test_buddy_alloc_exceeds_max_order
[05:14:12] [PASSED] gpu_test_buddy_offset_aligned_allocation
[05:14:12] [PASSED] gpu_test_buddy_subtree_offset_alignment_stress
[05:14:12] [PASSED] gpu_test_buddy_addr_to_block
[05:14:12] ==================== [PASSED] gpu_buddy ====================
[05:14:12] ============================================================
[05:14:12] Testing complete. Ran 18 tests: passed: 18
[05:14:13] Elapsed time: 26.715s total, 4.431s configuring, 20.367s building, 1.868s running

+ for kcfg in "${kunitconfigs[@]}"
+ [[ ! -f /kernel/drivers/gpu/drm/xe/.kunitconfig ]]
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/xe/.kunitconfig [05:14:13] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[05:14:15] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[05:14:48] Starting KUnit Kernel (1/1)...
[05:14:48] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[05:14:48] ============= refcount_interrupt (4 subtests) ==============
[05:14:48] [PASSED] test_single_irq_change
[05:14:48] [PASSED] test_nested_irq_change
[05:14:48] [PASSED] test_multiple_irq_change
[05:14:48] [PASSED] test_irq_save
[05:14:48] =============== [PASSED] refcount_interrupt ================
[05:14:48] ================== guc_buf (11 subtests) ===================
[05:14:48] [PASSED] test_smallest
[05:14:48] [PASSED] test_largest
[05:14:48] [PASSED] test_granular
[05:14:48] [PASSED] test_unique
[05:14:48] [PASSED] test_overlap
[05:14:48] [PASSED] test_reusable
[05:14:48] [PASSED] test_too_big
[05:14:48] [PASSED] test_flush
[05:14:48] [PASSED] test_lookup
[05:14:48] [PASSED] test_data
[05:14:48] [PASSED] test_class
[05:14:48] ===================== [PASSED] guc_buf =====================
[05:14:48] =================== guc_dbm (7 subtests) ===================
[05:14:48] [PASSED] test_empty
[05:14:48] [PASSED] test_default
[05:14:48] ======================== test_size  ========================
[05:14:48] [PASSED] 4
[05:14:48] [PASSED] 8
[05:14:48] [PASSED] 32
[05:14:48] [PASSED] 256
[05:14:48] ==================== [PASSED] test_size ====================
[05:14:48] ======================= test_reuse  ========================
[05:14:48] [PASSED] 4
[05:14:48] [PASSED] 8
[05:14:48] [PASSED] 32
[05:14:48] [PASSED] 256
[05:14:48] =================== [PASSED] test_reuse ====================
[05:14:48] =================== test_range_overlap  ====================
[05:14:48] [PASSED] 4
[05:14:48] [PASSED] 8
[05:14:48] [PASSED] 32
[05:14:48] [PASSED] 256
[05:14:48] =============== [PASSED] test_range_overlap ================
[05:14:49] =================== test_range_compact  ====================
[05:14:49] [PASSED] 4
[05:14:49] [PASSED] 8
[05:14:49] [PASSED] 32
[05:14:49] [PASSED] 256
[05:14:49] =============== [PASSED] test_range_compact ================
[05:14:49] ==================== test_range_spare  =====================
[05:14:49] [PASSED] 4
[05:14:49] [PASSED] 8
[05:14:49] [PASSED] 32
[05:14:49] [PASSED] 256
[05:14:49] ================ [PASSED] test_range_spare =================
[05:14:49] ===================== [PASSED] guc_dbm =====================
[05:14:49] =================== guc_idm (6 subtests) ===================
[05:14:49] [PASSED] bad_init
[05:14:49] [PASSED] no_init
[05:14:49] [PASSED] init_fini
[05:14:49] [PASSED] check_used
[05:14:49] [PASSED] check_quota
[05:14:49] [PASSED] check_all
[05:14:49] ===================== [PASSED] guc_idm =====================
[05:14:49] =============== guc_klv_helpers (9 subtests) ===============
[05:14:49] [PASSED] test_count
[05:14:49] [PASSED] test_encode_u32
[05:14:49] [PASSED] test_encode_u64
[05:14:49] [PASSED] test_encode_string
[05:14:49] [PASSED] test_encode_object_raw
[05:14:49] [PASSED] test_encode_object_klv
[05:14:49] [PASSED] test_encode_object_nested
[05:14:49] [PASSED] test_encode_object_basic
[05:14:49] [PASSED] test_print
[05:14:49] ================= [PASSED] guc_klv_helpers =================
[05:14:49] =================== xe_log (4 subtests) ====================
[05:14:49] [PASSED] demo_cper
[05:14:49] [PASSED] demo_dmesg
[05:14:49] ======================= test_dmesg  ========================
[05:14:49] [PASSED] test_fatal
[05:14:49] [PASSED] test_fatal_tile
[05:14:49] [PASSED] test_fatal_gt
[05:14:49] [PASSED] test_fatal_comp
[05:14:49] [PASSED] test_fatal_comp_tile
[05:14:49] [PASSED] test_fatal_comp_gt
[05:14:49] [PASSED] test_fatal_all
[05:14:49] [PASSED] test_recoverable
[05:14:49] [PASSED] test_recoverable_tile
[05:14:49] [PASSED] test_recoverable_gt
[05:14:49] [PASSED] test_recoverable_comp
[05:14:49] [PASSED] test_recoverable_comp_tile
[05:14:49] [PASSED] test_recoverable_comp_gt
[05:14:49] [PASSED] test_recoverable_all
[05:14:49] [PASSED] test_info
[05:14:49] [PASSED] test_info_tile
[05:14:49] [PASSED] test_info_gt
[05:14:49] [PASSED] test_info_err
[05:14:49] [PASSED] test_info_comp
[05:14:49] [PASSED] test_info_comp_tile
[05:14:49] [PASSED] test_info_comp_gt
[05:14:49] [PASSED] test_info_all
[05:14:49] [PASSED] test_hw_fatal
[05:14:49] [PASSED] test_hw_recoverable
[05:14:49] [PASSED] test_hw_corrected
[05:14:49] [PASSED] test_hw_informational
[05:14:49] =================== [PASSED] test_dmesg ====================
[05:14:49] ====================== test_invalid  =======================
[05:14:49] [SKIPPED] no-component no-location no-warn (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] reserved location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] unknown location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] nonzero-device-id location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] invalid-tile-id location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] invalid-gt-id location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] unknown component class (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] unknown system component (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] unknown hardware component (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] [SKIPPED] unknown component and location (requires CONFIG_DRM_XE_DEBUG)
[05:14:49] ================== [SKIPPED] test_invalid ==================
[05:14:49] ===================== [PASSED] xe_log ======================
[05:14:49] ================== no_relay (3 subtests) ===================
[05:14:49] [PASSED] xe_drops_guc2pf_if_not_ready
[05:14:49] [PASSED] xe_drops_guc2vf_if_not_ready
[05:14:49] [PASSED] xe_rejects_send_if_not_ready
[05:14:49] ==================== [PASSED] no_relay =====================
[05:14:49] ================== pf_relay (14 subtests) ==================
[05:14:49] [PASSED] pf_rejects_guc2pf_too_short
[05:14:49] [PASSED] pf_rejects_guc2pf_too_long
[05:14:49] [PASSED] pf_rejects_guc2pf_no_payload
[05:14:49] [PASSED] pf_fails_no_payload
[05:14:49] [PASSED] pf_fails_bad_origin
[05:14:49] [PASSED] pf_fails_bad_type
[05:14:49] [PASSED] pf_txn_reports_error
[05:14:49] [PASSED] pf_txn_sends_pf2guc
[05:14:49] [PASSED] pf_sends_pf2guc
[05:14:49] [SKIPPED] pf_loopback_nop (requires CONFIG_DRM_XE_DEBUG_SRIOV)
[05:14:49] [SKIPPED] pf_loopback_echo (requires CONFIG_DRM_XE_DEBUG_SRIOV)
[05:14:49] [SKIPPED] pf_loopback_fail (requires CONFIG_DRM_XE_DEBUG_SRIOV)
[05:14:49] [SKIPPED] pf_loopback_busy (requires CONFIG_DRM_XE_DEBUG_SRIOV)
[05:14:49] [SKIPPED] pf_loopback_retry (requires CONFIG_DRM_XE_DEBUG_SRIOV)
[05:14:49] ==================== [PASSED] pf_relay =====================
[05:14:49] ================== vf_relay (3 subtests) ===================
[05:14:49] [PASSED] vf_rejects_guc2vf_too_short
[05:14:49] [PASSED] vf_rejects_guc2vf_too_long
[05:14:49] [PASSED] vf_rejects_guc2vf_no_payload
[05:14:49] ==================== [PASSED] vf_relay =====================
[05:14:49] ================ pf_gt_config (9 subtests) =================
[05:14:49] [PASSED] fair_contexts_1vf
[05:14:49] [PASSED] fair_doorbells_1vf
[05:14:49] [PASSED] fair_ggtt_1vf
[05:14:49] ====================== fair_vram_1vf  ======================
[05:14:49] [PASSED] 3.50 GiB
[05:14:49] [PASSED] 11.5 GiB
[05:14:49] [PASSED] 15.5 GiB
[05:14:49] [PASSED] 31.5 GiB
[05:14:49] [PASSED] 63.5 GiB
[05:14:49] [PASSED] 1.91 GiB
[05:14:49] ================== [PASSED] fair_vram_1vf ==================
[05:14:49] ================ fair_vram_1vf_admin_only  =================
[05:14:49] [PASSED] 3.50 GiB
[05:14:49] [PASSED] 11.5 GiB
[05:14:49] [PASSED] 15.5 GiB
[05:14:49] [PASSED] 31.5 GiB
[05:14:49] [PASSED] 63.5 GiB
[05:14:49] [PASSED] 1.91 GiB
[05:14:49] ============ [PASSED] fair_vram_1vf_admin_only =============
[05:14:49] ====================== fair_contexts  ======================
[05:14:49] [PASSED] 1 VF
[05:14:49] [PASSED] 2 VFs
[05:14:49] [PASSED] 3 VFs
[05:14:49] [PASSED] 4 VFs
[05:14:49] [PASSED] 5 VFs
[05:14:49] [PASSED] 6 VFs
[05:14:49] [PASSED] 7 VFs
[05:14:49] [PASSED] 8 VFs
[05:14:49] [PASSED] 9 VFs
[05:14:49] [PASSED] 10 VFs
[05:14:49] [PASSED] 11 VFs
[05:14:49] [PASSED] 12 VFs
[05:14:49] [PASSED] 13 VFs
[05:14:49] [PASSED] 14 VFs
[05:14:49] [PASSED] 15 VFs
[05:14:49] [PASSED] 16 VFs
[05:14:49] [PASSED] 17 VFs
[05:14:49] [PASSED] 18 VFs
[05:14:49] [PASSED] 19 VFs
[05:14:49] [PASSED] 20 VFs
[05:14:49] [PASSED] 21 VFs
[05:14:49] [PASSED] 22 VFs
[05:14:49] [PASSED] 23 VFs
[05:14:49] [PASSED] 24 VFs
[05:14:49] [PASSED] 25 VFs
[05:14:49] [PASSED] 26 VFs
[05:14:49] [PASSED] 27 VFs
[05:14:49] [PASSED] 28 VFs
[05:14:49] [PASSED] 29 VFs
[05:14:49] [PASSED] 30 VFs
[05:14:49] [PASSED] 31 VFs
[05:14:49] [PASSED] 32 VFs
[05:14:49] [PASSED] 33 VFs
[05:14:49] [PASSED] 34 VFs
[05:14:49] [PASSED] 35 VFs
[05:14:49] [PASSED] 36 VFs
[05:14:49] [PASSED] 37 VFs
[05:14:49] [PASSED] 38 VFs
[05:14:49] [PASSED] 39 VFs
[05:14:49] [PASSED] 40 VFs
[05:14:49] [PASSED] 41 VFs
[05:14:49] [PASSED] 42 VFs
[05:14:49] [PASSED] 43 VFs
[05:14:49] [PASSED] 44 VFs
[05:14:49] [PASSED] 45 VFs
[05:14:49] [PASSED] 46 VFs
[05:14:49] [PASSED] 47 VFs
[05:14:49] [PASSED] 48 VFs
[05:14:49] [PASSED] 49 VFs
[05:14:49] [PASSED] 50 VFs
[05:14:49] [PASSED] 51 VFs
[05:14:49] [PASSED] 52 VFs
[05:14:49] [PASSED] 53 VFs
[05:14:49] [PASSED] 54 VFs
[05:14:49] [PASSED] 55 VFs
[05:14:49] [PASSED] 56 VFs
[05:14:49] [PASSED] 57 VFs
[05:14:49] [PASSED] 58 VFs
[05:14:49] [PASSED] 59 VFs
[05:14:49] [PASSED] 60 VFs
[05:14:49] [PASSED] 61 VFs
[05:14:49] [PASSED] 62 VFs
[05:14:49] [PASSED] 63 VFs
[05:14:49] ================== [PASSED] fair_contexts ==================
[05:14:49] ===================== fair_doorbells  ======================
[05:14:49] [PASSED] 1 VF
[05:14:49] [PASSED] 2 VFs
[05:14:49] [PASSED] 3 VFs
[05:14:49] [PASSED] 4 VFs
[05:14:49] [PASSED] 5 VFs
[05:14:49] [PASSED] 6 VFs
[05:14:49] [PASSED] 7 VFs
[05:14:49] [PASSED] 8 VFs
[05:14:49] [PASSED] 9 VFs
[05:14:49] [PASSED] 10 VFs
[05:14:49] [PASSED] 11 VFs
[05:14:49] [PASSED] 12 VFs
[05:14:49] [PASSED] 13 VFs
[05:14:49] [PASSED] 14 VFs
[05:14:49] [PASSED] 15 VFs
[05:14:49] [PASSED] 16 VFs
[05:14:49] [PASSED] 17 VFs
[05:14:49] [PASSED] 18 VFs
[05:14:49] [PASSED] 19 VFs
[05:14:49] [PASSED] 20 VFs
[05:14:49] [PASSED] 21 VFs
[05:14:49] [PASSED] 22 VFs
[05:14:49] [PASSED] 23 VFs
[05:14:49] [PASSED] 24 VFs
[05:14:49] [PASSED] 25 VFs
[05:14:49] [PASSED] 26 VFs
[05:14:49] [PASSED] 27 VFs
[05:14:49] [PASSED] 28 VFs
[05:14:49] [PASSED] 29 VFs
[05:14:49] [PASSED] 30 VFs
[05:14:49] [PASSED] 31 VFs
[05:14:49] [PASSED] 32 VFs
[05:14:49] [PASSED] 33 VFs
[05:14:49] [PASSED] 34 VFs
[05:14:49] [PASSED] 35 VFs
[05:14:49] [PASSED] 36 VFs
[05:14:49] [PASSED] 37 VFs
[05:14:49] [PASSED] 38 VFs
[05:14:49] [PASSED] 39 VFs
[05:14:49] [PASSED] 40 VFs
[05:14:49] [PASSED] 41 VFs
[05:14:49] [PASSED] 42 VFs
[05:14:49] [PASSED] 43 VFs
[05:14:49] [PASSED] 44 VFs
[05:14:49] [PASSED] 45 VFs
[05:14:49] [PASSED] 46 VFs
[05:14:49] [PASSED] 47 VFs
[05:14:49] [PASSED] 48 VFs
[05:14:49] [PASSED] 49 VFs
[05:14:49] [PASSED] 50 VFs
[05:14:49] [PASSED] 51 VFs
[05:14:49] [PASSED] 52 VFs
[05:14:49] [PASSED] 53 VFs
[05:14:49] [PASSED] 54 VFs
[05:14:49] [PASSED] 55 VFs
[05:14:49] [PASSED] 56 VFs
[05:14:49] [PASSED] 57 VFs
[05:14:49] [PASSED] 58 VFs
[05:14:49] [PASSED] 59 VFs
[05:14:49] [PASSED] 60 VFs
[05:14:49] [PASSED] 61 VFs
[05:14:49] [PASSED] 62 VFs
[05:14:49] [PASSED] 63 VFs
[05:14:49] ================= [PASSED] fair_doorbells ==================
[05:14:49] ======================== fair_ggtt  ========================
[05:14:49] [PASSED] 1 VF
[05:14:49] [PASSED] 2 VFs
[05:14:49] [PASSED] 3 VFs
[05:14:49] [PASSED] 4 VFs
[05:14:49] [PASSED] 5 VFs
[05:14:49] [PASSED] 6 VFs
[05:14:49] [PASSED] 7 VFs
[05:14:49] [PASSED] 8 VFs
[05:14:49] [PASSED] 9 VFs
[05:14:49] [PASSED] 10 VFs
[05:14:49] [PASSED] 11 VFs
[05:14:49] [PASSED] 12 VFs
[05:14:49] [PASSED] 13 VFs
[05:14:49] [PASSED] 14 VFs
[05:14:49] [PASSED] 15 VFs
[05:14:49] [PASSED] 16 VFs
[05:14:49] [PASSED] 17 VFs
[05:14:49] [PASSED] 18 VFs
[05:14:49] [PASSED] 19 VFs
[05:14:49] [PASSED] 20 VFs
[05:14:49] [PASSED] 21 VFs
[05:14:49] [PASSED] 22 VFs
[05:14:49] [PASSED] 23 VFs
[05:14:49] [PASSED] 24 VFs
[05:14:49] [PASSED] 25 VFs
[05:14:49] [PASSED] 26 VFs
[05:14:49] [PASSED] 27 VFs
[05:14:49] [PASSED] 28 VFs
[05:14:49] [PASSED] 29 VFs
[05:14:49] [PASSED] 30 VFs
[05:14:49] [PASSED] 31 VFs
[05:14:49] [PASSED] 32 VFs
[05:14:49] [PASSED] 33 VFs
[05:14:49] [PASSED] 34 VFs
[05:14:49] [PASSED] 35 VFs
[05:14:49] [PASSED] 36 VFs
[05:14:49] [PASSED] 37 VFs
[05:14:49] [PASSED] 38 VFs
[05:14:49] [PASSED] 39 VFs
[05:14:49] [PASSED] 40 VFs
[05:14:49] [PASSED] 41 VFs
[05:14:49] [PASSED] 42 VFs
[05:14:49] [PASSED] 43 VFs
[05:14:49] [PASSED] 44 VFs
[05:14:49] [PASSED] 45 VFs
[05:14:49] [PASSED] 46 VFs
[05:14:49] [PASSED] 47 VFs
[05:14:49] [PASSED] 48 VFs
[05:14:49] [PASSED] 49 VFs
[05:14:49] [PASSED] 50 VFs
[05:14:49] [PASSED] 51 VFs
[05:14:49] [PASSED] 52 VFs
[05:14:49] [PASSED] 53 VFs
[05:14:49] [PASSED] 54 VFs
[05:14:49] [PASSED] 55 VFs
[05:14:49] [PASSED] 56 VFs
[05:14:49] [PASSED] 57 VFs
[05:14:49] [PASSED] 58 VFs
[05:14:49] [PASSED] 59 VFs
[05:14:49] [PASSED] 60 VFs
[05:14:49] [PASSED] 61 VFs
[05:14:49] [PASSED] 62 VFs
[05:14:49] [PASSED] 63 VFs
[05:14:49] ==================== [PASSED] fair_ggtt ====================
[05:14:49] ======================== fair_vram  ========================
[05:14:49] [PASSED] 1 VF
[05:14:49] [PASSED] 2 VFs
[05:14:49] [PASSED] 3 VFs
[05:14:49] [PASSED] 4 VFs
[05:14:49] [PASSED] 5 VFs
[05:14:49] [PASSED] 6 VFs
[05:14:49] [PASSED] 7 VFs
[05:14:49] [PASSED] 8 VFs
[05:14:49] [PASSED] 9 VFs
[05:14:49] [PASSED] 10 VFs
[05:14:49] [PASSED] 11 VFs
[05:14:49] [PASSED] 12 VFs
[05:14:49] [PASSED] 13 VFs
[05:14:49] [PASSED] 14 VFs
[05:14:49] [PASSED] 15 VFs
[05:14:49] [PASSED] 16 VFs
[05:14:49] [PASSED] 17 VFs
[05:14:49] [PASSED] 18 VFs
[05:14:49] [PASSED] 19 VFs
[05:14:49] [PASSED] 20 VFs
[05:14:49] [PASSED] 21 VFs
[05:14:49] [PASSED] 22 VFs
[05:14:49] [PASSED] 23 VFs
[05:14:49] [PASSED] 24 VFs
[05:14:49] [PASSED] 25 VFs
[05:14:49] [PASSED] 26 VFs
[05:14:49] [PASSED] 27 VFs
[05:14:49] [PASSED] 28 VFs
[05:14:49] [PASSED] 29 VFs
[05:14:49] [PASSED] 30 VFs
[05:14:49] [PASSED] 31 VFs
[05:14:49] [PASSED] 32 VFs
[05:14:49] [PASSED] 33 VFs
[05:14:49] [PASSED] 34 VFs
[05:14:49] [PASSED] 35 VFs
[05:14:49] [PASSED] 36 VFs
[05:14:49] [PASSED] 37 VFs
[05:14:49] [PASSED] 38 VFs
[05:14:49] [PASSED] 39 VFs
[05:14:49] [PASSED] 40 VFs
[05:14:49] [PASSED] 41 VFs
[05:14:49] [PASSED] 42 VFs
[05:14:49] [PASSED] 43 VFs
[05:14:49] [PASSED] 44 VFs
[05:14:49] [PASSED] 45 VFs
[05:14:49] [PASSED] 46 VFs
[05:14:49] [PASSED] 47 VFs
[05:14:49] [PASSED] 48 VFs
[05:14:49] [PASSED] 49 VFs
[05:14:49] [PASSED] 50 VFs
[05:14:49] [PASSED] 51 VFs
[05:14:49] [PASSED] 52 VFs
[05:14:49] [PASSED] 53 VFs
[05:14:49] [PASSED] 54 VFs
[05:14:49] [PASSED] 55 VFs
[05:14:49] [PASSED] 56 VFs
[05:14:49] [PASSED] 57 VFs
[05:14:49] [PASSED] 58 VFs
[05:14:49] [PASSED] 59 VFs
[05:14:49] [PASSED] 60 VFs
[05:14:49] [PASSED] 61 VFs
[05:14:49] [PASSED] 62 VFs
[05:14:49] [PASSED] 63 VFs
[05:14:49] ==================== [PASSED] fair_vram ====================
[05:14:49] ================== [PASSED] pf_gt_config ===================
[05:14:49] ===================== lmtt (1 subtest) =====================
[05:14:49] ======================== test_ops  =========================
[05:14:49] [PASSED] 2-level
[05:14:49] [PASSED] multi-level
[05:14:49] ==================== [PASSED] test_ops =====================
[05:14:49] ====================== [PASSED] lmtt =======================
[05:14:49] ================= sriov_packet (1 subtest) =================
[05:14:49] [PASSED] test_descriptor_init
[05:14:49] ================== [PASSED] sriov_packet ===================
[05:14:49] ================= pf_service (11 subtests) =================
[05:14:49] [PASSED] pf_negotiate_any
[05:14:49] [PASSED] pf_negotiate_base_match
[05:14:49] [PASSED] pf_negotiate_base_newer
[05:14:49] [PASSED] pf_negotiate_base_next
[05:14:49] [SKIPPED] pf_negotiate_base_older (no older minor)
[05:14:49] [PASSED] pf_negotiate_base_prev
[05:14:49] [PASSED] pf_negotiate_latest_match
[05:14:49] [PASSED] pf_negotiate_latest_newer
[05:14:49] [PASSED] pf_negotiate_latest_next
[05:14:49] [SKIPPED] pf_negotiate_latest_older (no older minor)
[05:14:49] [SKIPPED] pf_negotiate_latest_prev (no prev major)
[05:14:49] =================== [PASSED] pf_service ====================
[05:14:49] ================= xe_guc_g2g (2 subtests) ==================
[05:14:49] ============== xe_live_guc_g2g_kunit_default  ==============
[05:14:49] ========= [SKIPPED] xe_live_guc_g2g_kunit_default ==========
[05:14:49] ============== xe_live_guc_g2g_kunit_allmem  ===============
[05:14:49] ========== [SKIPPED] xe_live_guc_g2g_kunit_allmem ==========
[05:14:49] =================== [SKIPPED] xe_guc_g2g ===================
[05:14:49] =================== xe_mocs (2 subtests) ===================
[05:14:49] ================ xe_live_mocs_kernel_kunit  ================
[05:14:49] =========== [SKIPPED] xe_live_mocs_kernel_kunit ============
[05:14:49] ================ xe_live_mocs_reset_kunit  =================
[05:14:49] ============ [SKIPPED] xe_live_mocs_reset_kunit ============
[05:14:49] ==================== [SKIPPED] xe_mocs =====================
[05:14:49] ================= xe_migrate (2 subtests) ==================
[05:14:49] ================= xe_migrate_sanity_kunit  =================
[05:14:49] ============ [SKIPPED] xe_migrate_sanity_kunit =============
[05:14:49] ================== xe_validate_ccs_kunit  ==================
[05:14:49] ============= [SKIPPED] xe_validate_ccs_kunit ==============
[05:14:49] =================== [SKIPPED] xe_migrate ===================
[05:14:49] ================== xe_dma_buf (1 subtest) ==================
[05:14:49] ==================== xe_dma_buf_kunit  =====================
[05:14:49] ================ [SKIPPED] xe_dma_buf_kunit ================
[05:14:49] =================== [SKIPPED] xe_dma_buf ===================
[05:14:49] ================= xe_bo_shrink (1 subtest) =================
[05:14:49] =================== xe_bo_shrink_kunit  ====================
[05:14:49] =============== [SKIPPED] xe_bo_shrink_kunit ===============
[05:14:49] ================== [SKIPPED] xe_bo_shrink ==================
[05:14:49] ==================== xe_bo (2 subtests) ====================
[05:14:49] ================== xe_ccs_migrate_kunit  ===================
[05:14:49] ============== [SKIPPED] xe_ccs_migrate_kunit ==============
[05:14:49] ==================== xe_bo_evict_kunit  ====================
[05:14:49] =============== [SKIPPED] xe_bo_evict_kunit ================
[05:14:49] ===================== [SKIPPED] xe_bo ======================
[05:14:49] =================== xe_any (9 subtests) ====================
[05:14:49] [PASSED] test_to_xe
[05:14:49] [PASSED] test_to_dev
[05:14:49] [PASSED] test_to_pdev
[05:14:49] [PASSED] test_to_drm
[05:14:49] [PASSED] test_if_pdev
[05:14:49] [PASSED] test_if_xe
[05:14:49] [PASSED] test_if_tile
[05:14:49] [PASSED] test_if_gt
[05:14:49] [PASSED] test_to_id
[05:14:49] ===================== [PASSED] xe_any ======================
[05:14:49] ==================== args (13 subtests) ====================
[05:14:49] [PASSED] count_args_test
[05:14:49] [PASSED] call_args_example
[05:14:49] [PASSED] call_args_test
[05:14:49] [PASSED] drop_first_arg_example
[05:14:49] [PASSED] drop_first_arg_test
[05:14:49] [PASSED] first_arg_example
[05:14:49] [PASSED] first_arg_test
[05:14:49] [PASSED] last_arg_example
[05:14:49] [PASSED] last_arg_test
[05:14:49] [PASSED] pick_arg_example
[05:14:49] [PASSED] if_args_example
[05:14:49] [PASSED] if_args_test
[05:14:49] [PASSED] sep_comma_example
[05:14:49] ====================== [PASSED] args =======================
[05:14:49] =================== xe_pci (3 subtests) ====================
[05:14:49] ==================== check_graphics_ip  ====================
[05:14:49] [PASSED] 12.00 Xe_LP
[05:14:49] [PASSED] 12.10 Xe_LP+
[05:14:49] [PASSED] 12.55 Xe_HPG
[05:14:49] [PASSED] 12.60 Xe_HPC
[05:14:49] [PASSED] 12.70 Xe_LPG
[05:14:49] [PASSED] 12.71 Xe_LPG
[05:14:49] [PASSED] 12.74 Xe_LPG+
[05:14:49] [PASSED] 20.01 Xe2_HPG
[05:14:49] [PASSED] 20.02 Xe2_HPG
[05:14:49] [PASSED] 20.04 Xe2_LPG
[05:14:49] [PASSED] 30.00 Xe3_LPG
[05:14:49] [PASSED] 30.01 Xe3_LPG
[05:14:49] [PASSED] 30.03 Xe3_LPG
[05:14:49] [PASSED] 30.04 Xe3_LPG
[05:14:49] [PASSED] 30.05 Xe3_LPG
[05:14:49] [PASSED] 35.10 Xe3p_LPG
[05:14:49] [PASSED] 35.11 Xe3p_XPC
[05:14:49] ================ [PASSED] check_graphics_ip ================
[05:14:49] ===================== check_media_ip  ======================
[05:14:49] [PASSED] 12.00 Xe_M
[05:14:49] [PASSED] 12.55 Xe_HPM
[05:14:49] [PASSED] 13.00 Xe_LPM+
[05:14:49] [PASSED] 13.01 Xe2_HPM
[05:14:49] [PASSED] 20.00 Xe2_LPM
[05:14:49] [PASSED] 30.00 Xe3_LPM
[05:14:49] [PASSED] 30.02 Xe3_LPM
[05:14:49] [PASSED] 35.00 Xe3p_LPM
[05:14:49] [PASSED] 35.03 Xe3p_HPM
[05:14:49] ================= [PASSED] check_media_ip ==================
[05:14:49] =================== check_platform_desc  ===================
[05:14:49] [PASSED] 0x9A60 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A68 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A70 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A40 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A49 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A59 (TIGERLAKE)
[05:14:49] [PASSED] 0x9A78 (TIGERLAKE)
[05:14:49] [PASSED] 0x9AC0 (TIGERLAKE)
[05:14:49] [PASSED] 0x9AC9 (TIGERLAKE)
[05:14:49] [PASSED] 0x9AD9 (TIGERLAKE)
[05:14:49] [PASSED] 0x9AF8 (TIGERLAKE)
[05:14:49] [PASSED] 0x4C80 (ROCKETLAKE)
[05:14:49] [PASSED] 0x4C8A (ROCKETLAKE)
[05:14:49] [PASSED] 0x4C8B (ROCKETLAKE)
[05:14:49] [PASSED] 0x4C8C (ROCKETLAKE)
[05:14:49] [PASSED] 0x4C90 (ROCKETLAKE)
[05:14:49] [PASSED] 0x4C9A (ROCKETLAKE)
[05:14:49] [PASSED] 0x4680 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4682 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4688 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x468A (ALDERLAKE_S)
[05:14:49] [PASSED] 0x468B (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4690 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4692 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4693 (ALDERLAKE_S)
[05:14:49] [PASSED] 0x46A0 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46A1 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46A2 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46A3 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46A6 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46A8 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46AA (ALDERLAKE_P)
[05:14:49] [PASSED] 0x462A (ALDERLAKE_P)
[05:14:49] [PASSED] 0x4626 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x4628 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46B0 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46B1 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46B2 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46B3 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46C0 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46C1 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46C2 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46C3 (ALDERLAKE_P)
[05:14:49] [PASSED] 0x46D0 (ALDERLAKE_N)
[05:14:49] [PASSED] 0x46D1 (ALDERLAKE_N)
[05:14:49] [PASSED] 0x46D2 (ALDERLAKE_N)
[05:14:49] [PASSED] 0x46D3 (ALDERLAKE_N)
[05:14:49] [PASSED] 0x46D4 (ALDERLAKE_N)
[05:14:49] [PASSED] 0xA721 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7A1 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7A9 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7AC (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7AD (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA720 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7A0 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7A8 (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7AA (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA7AB (ALDERLAKE_P)
[05:14:49] [PASSED] 0xA780 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA781 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA782 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA783 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA788 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA789 (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA78A (ALDERLAKE_S)
[05:14:49] [PASSED] 0xA78B (ALDERLAKE_S)
[05:14:49] [PASSED] 0x4905 (DG1)
[05:14:49] [PASSED] 0x4906 (DG1)
[05:14:49] [PASSED] 0x4907 (DG1)
[05:14:49] [PASSED] 0x4908 (DG1)
[05:14:49] [PASSED] 0x4909 (DG1)
[05:14:49] [PASSED] 0x56C0 (DG2)
[05:14:49] [PASSED] 0x56C2 (DG2)
[05:14:49] [PASSED] 0x56C1 (DG2)
[05:14:49] [PASSED] 0x7D51 (METEORLAKE)
[05:14:49] [PASSED] 0x7DD1 (METEORLAKE)
[05:14:49] [PASSED] 0x7D41 (METEORLAKE)
[05:14:49] [PASSED] 0x7D67 (METEORLAKE)
[05:14:49] [PASSED] 0xB640 (METEORLAKE)
[05:14:49] [PASSED] 0x56A0 (DG2)
[05:14:49] [PASSED] 0x56A1 (DG2)
[05:14:49] [PASSED] 0x56A2 (DG2)
[05:14:49] [PASSED] 0x56BE (DG2)
[05:14:49] [PASSED] 0x56BF (DG2)
[05:14:49] [PASSED] 0x5690 (DG2)
[05:14:49] [PASSED] 0x5691 (DG2)
[05:14:49] [PASSED] 0x5692 (DG2)
[05:14:49] [PASSED] 0x56A5 (DG2)
[05:14:49] [PASSED] 0x56A6 (DG2)
[05:14:49] [PASSED] 0x56B0 (DG2)
[05:14:49] [PASSED] 0x56B1 (DG2)
[05:14:49] [PASSED] 0x56BA (DG2)
[05:14:49] [PASSED] 0x56BB (DG2)
[05:14:49] [PASSED] 0x56BC (DG2)
[05:14:49] [PASSED] 0x56BD (DG2)
[05:14:49] [PASSED] 0x5693 (DG2)
[05:14:49] [PASSED] 0x5694 (DG2)
[05:14:49] [PASSED] 0x5695 (DG2)
[05:14:49] [PASSED] 0x56A3 (DG2)
[05:14:49] [PASSED] 0x56A4 (DG2)
[05:14:49] [PASSED] 0x56B2 (DG2)
[05:14:49] [PASSED] 0x56B3 (DG2)
[05:14:49] [PASSED] 0x5696 (DG2)
[05:14:49] [PASSED] 0x5697 (DG2)
[05:14:49] [PASSED] 0xB69 (PVC)
[05:14:49] [PASSED] 0xB6E (PVC)
[05:14:49] [PASSED] 0xBD4 (PVC)
[05:14:49] [PASSED] 0xBD5 (PVC)
[05:14:49] [PASSED] 0xBD6 (PVC)
[05:14:49] [PASSED] 0xBD7 (PVC)
[05:14:49] [PASSED] 0xBD8 (PVC)
[05:14:49] [PASSED] 0xBD9 (PVC)
[05:14:49] [PASSED] 0xBDA (PVC)
[05:14:49] [PASSED] 0xBDB (PVC)
[05:14:49] [PASSED] 0xBE0 (PVC)
[05:14:49] [PASSED] 0xBE1 (PVC)
[05:14:49] [PASSED] 0xBE5 (PVC)
[05:14:49] [PASSED] 0x7D40 (METEORLAKE)
[05:14:49] [PASSED] 0x7D45 (METEORLAKE)
[05:14:49] [PASSED] 0x7D55 (METEORLAKE)
[05:14:49] [PASSED] 0x7D60 (METEORLAKE)
[05:14:49] [PASSED] 0x7DD5 (METEORLAKE)
[05:14:49] [PASSED] 0x6420 (LUNARLAKE)
[05:14:49] [PASSED] 0x64A0 (LUNARLAKE)
[05:14:49] [PASSED] 0x64B0 (LUNARLAKE)
[05:14:49] [PASSED] 0xE202 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE209 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE20B (BATTLEMAGE)
[05:14:49] [PASSED] 0xE20C (BATTLEMAGE)
[05:14:49] [PASSED] 0xE20D (BATTLEMAGE)
[05:14:49] [PASSED] 0xE210 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE211 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE212 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE216 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE220 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE221 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE222 (BATTLEMAGE)
[05:14:49] [PASSED] 0xE223 (BATTLEMAGE)
[05:14:49] [PASSED] 0xB080 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB081 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB082 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB083 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB084 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB085 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB086 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB087 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB08F (PANTHERLAKE)
[05:14:49] [PASSED] 0xB090 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB0A0 (PANTHERLAKE)
[05:14:49] [PASSED] 0xB0B0 (PANTHERLAKE)
[05:14:49] [PASSED] 0xFD80 (PANTHERLAKE)
[05:14:49] [PASSED] 0xFD81 (PANTHERLAKE)
[05:14:49] [PASSED] 0xD740 (NOVALAKE_S)
[05:14:49] [PASSED] 0xD741 (NOVALAKE_S)
[05:14:49] [PASSED] 0xD742 (NOVALAKE_S)
[05:14:49] [PASSED] 0xD743 (NOVALAKE_S)
[05:14:49] [PASSED] 0xD745 (NOVALAKE_S)
[05:14:49] [PASSED] 0xD74A (NOVALAKE_S)
[05:14:49] [PASSED] 0xD74B (NOVALAKE_S)
[05:14:49] [PASSED] 0x674C (CRESCENTISLAND)
[05:14:49] [PASSED] 0x674D (CRESCENTISLAND)
[05:14:49] [PASSED] 0x674E (CRESCENTISLAND)
[05:14:49] [PASSED] 0x674F (CRESCENTISLAND)
[05:14:49] [PASSED] 0x6750 (CRESCENTISLAND)
[05:14:49] [PASSED] 0xD750 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD751 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD752 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD753 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD754 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD755 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD756 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD757 (NOVALAKE_P)
[05:14:49] [PASSED] 0xD75F (NOVALAKE_P)
[05:14:49] =============== [PASSED] check_platform_desc ===============
[05:14:49] ===================== [PASSED] xe_pci ======================
[05:14:49] ============= xe_rtp_tables_test (5 subtests) ==============
[05:14:49] ================== xe_rtp_table_gt_test  ===================
[05:14:49] [PASSED] gt_was/14011060649
[05:14:49] [PASSED] gt_was/14011059788
[05:14:49] [PASSED] gt_was/14015795083
[05:14:49] [PASSED] gt_was/16021867713
[05:14:49] [PASSED] gt_was/14019449301
[05:14:49] [PASSED] gt_was/16028005424
[05:14:49] [PASSED] gt_was/14026578760
[05:14:49] [PASSED] gt_was/1409420604
[05:14:49] [PASSED] gt_was/1408615072
[05:14:49] [PASSED] gt_was/22010523718
[05:14:49] [PASSED] gt_was/14011006942
[05:14:49] [PASSED] gt_was/14014830051
[05:14:49] [PASSED] gt_was/18018781329
[05:14:49] [PASSED] gt_was/1509235366
[05:14:49] [PASSED] gt_was/18018781329
[05:14:49] [PASSED] gt_was/16016694945
[05:14:49] [PASSED] gt_was/14018575942
[05:14:49] [PASSED] gt_was/22016670082
[05:14:49] [PASSED] gt_was/22016670082
[05:14:49] [PASSED] gt_was/14017421178
[05:14:49] [PASSED] gt_was/16025250150
[05:14:49] [PASSED] gt_was/14021871409
[05:14:49] [PASSED] gt_was/16021865536
[05:14:49] [PASSED] gt_was/14021486841
[05:14:49] [PASSED] gt_was/14025160223
[05:14:49] [PASSED] gt_was/14026144927, 16029437861, 14026127056
[05:14:49] [PASSED] gt_was/14025635424
[05:14:49] [PASSED] gt_was/16028005424
[05:14:49] ============== [PASSED] xe_rtp_table_gt_test ===============
[05:14:49] ================== xe_rtp_table_gt_test  ===================
[05:14:49] [PASSED] gt_tunings/Tuning: Blend Fill Caching Optimization Disable
[05:14:49] [PASSED] gt_tunings/Tuning: 32B Access Enable
[05:14:49] [PASSED] gt_tunings/Tuning: L3 cache
[05:14:49] [PASSED] gt_tunings/Tuning: L3 cache - media
[05:14:49] [PASSED] gt_tunings/Tuning: Compression Overfetch
[05:14:49] [PASSED] gt_tunings/Tuning: Compression Overfetch - media
[05:14:49] [PASSED] gt_tunings/Tuning: Enable compressible partial write overfetch in L3
[05:14:49] [PASSED] gt_tunings/Tuning: Enable compressible partial write overfetch in L3 - media
[05:14:49] [PASSED] gt_tunings/Tuning: L2 Overfetch Compressible Only
[05:14:49] [PASSED] gt_tunings/Tuning: L2 Overfetch Compressible Only - media
[05:14:49] [PASSED] gt_tunings/Tuning: Stateless compression control
[05:14:49] [PASSED] gt_tunings/Tuning: Stateless compression control - media
[05:14:49] [PASSED] gt_tunings/Tuning: L3 RW flush all Cache
[05:14:49] [PASSED] gt_tunings/Tuning: L3 RW flush all cache - media
[05:14:49] [PASSED] gt_tunings/Tuning: Set STLB Bank Hash Mode to 4KB
[05:14:49] ============== [PASSED] xe_rtp_table_gt_test ===============
[05:14:49] ================== xe_rtp_table_oob_test  ==================
[05:14:49] [PASSED] oob_was/1607983814
[05:14:49] [PASSED] oob_was/16010904313
[05:14:49] [PASSED] oob_was/18022495364
[05:14:49] [PASSED] oob_was/22012773006
[05:14:49] [PASSED] oob_was/14014475959
[05:14:49] [PASSED] oob_was/22011391025
[05:14:49] [PASSED] oob_was/22012727170
[05:14:49] [PASSED] oob_was/22012727685
[05:14:49] [PASSED] oob_was/22016596838
[05:14:49] [PASSED] oob_was/18020744125
[05:14:49] [PASSED] oob_was/1409600907
[05:14:49] [PASSED] oob_was/22014953428
[05:14:49] [PASSED] oob_was/16017236439
[05:14:49] [PASSED] oob_was/14019821291
[05:14:49] [PASSED] oob_was/14015076503
[05:14:49] [PASSED] oob_was/14018913170
[05:14:49] [PASSED] oob_was/14018094691
[05:14:49] [PASSED] oob_was/18024947630
[05:14:49] [PASSED] oob_was/16022287689
[05:14:49] [PASSED] oob_was/13011645652
[05:14:49] [PASSED] oob_was/14022293748
[05:14:49] [PASSED] oob_was/22019794406
[05:14:49] [PASSED] oob_was/22019338487
[05:14:49] [PASSED] oob_was/16023588340
[05:14:49] [PASSED] oob_was/14019789679
[05:14:49] [PASSED] oob_was/14022866841
[05:14:49] [PASSED] oob_was/16021333562
[05:14:49] [PASSED] oob_was/14016712196
[05:14:49] [PASSED] oob_was/14015568240
[05:14:49] [PASSED] oob_was/18013179988
[05:14:49] [PASSED] oob_was/1508761755
[05:14:49] [PASSED] oob_was/16023105232
[05:14:49] [PASSED] oob_was/16026508708
[05:14:49] [PASSED] oob_was/14020001231
[05:14:49] [PASSED] oob_was/16023683509
[05:14:49] [PASSED] oob_was/14025515070
[05:14:49] [PASSED] oob_was/15015404425_disable
[05:14:49] [PASSED] oob_was/16026007364
[05:14:49] [PASSED] oob_was/14020316580
[05:14:49] [PASSED] oob_was/14025883347
[05:14:49] [PASSED] oob_was/16029380221
[05:14:49] [PASSED] oob_was/22022079272
[05:14:49] [PASSED] oob_was/16029897822
[05:14:49] [PASSED] oob_was/14027054324
[05:14:49] ============== [PASSED] xe_rtp_table_oob_test ==============
[05:14:49] ================ xe_rtp_table_dev_oob_test  ================
[05:14:49] [PASSED] device_oob_was/22010954014
[05:14:49] [PASSED] device_oob_was/15015404425
[05:14:49] [PASSED] device_oob_was/22019338487_display
[05:14:49] [PASSED] device_oob_was/14022085890
[05:14:49] [PASSED] device_oob_was/14026539277
[05:14:49] [PASSED] device_oob_was/14026633728
[05:14:49] [PASSED] device_oob_was/14026746987
[05:14:49] [PASSED] device_oob_was/14026779378
[05:14:49] ============ [PASSED] xe_rtp_table_dev_oob_test ============
[05:14:49] ========== xe_rtp_table_missing_upper_bound_test  ==========
[05:14:49] [PASSED] register_whitelist/WaAllowPMDepthAndInvocationCountAccessFromUMD, 1408556865
[05:14:49] [PASSED] register_whitelist/1508744258, 14012131227, 1808121037
[05:14:49] [PASSED] register_whitelist/1806527549
[05:14:49] [PASSED] register_whitelist/allow_read_ctx_timestamp
[05:14:49] [PASSED] register_whitelist/allow_read_queue_timestamp
[05:14:49] [PASSED] register_whitelist/16014440446
[05:14:49] [PASSED] register_whitelist/16017236439
[05:14:49] [PASSED] register_whitelist/16020183090
[05:14:49] [PASSED] register_whitelist/14024997852
[05:14:49] [PASSED] register_whitelist/14024997852
[05:14:49] ====== [PASSED] xe_rtp_table_missing_upper_bound_test ======
[05:14:49] =============== [PASSED] xe_rtp_tables_test ================
[05:14:49] =================== xe_rtp (3 subtests) ====================
[05:14:49] =================== xe_rtp_rules_tests  ====================
[05:14:49] [PASSED] no
[05:14:49] [PASSED] yes
[05:14:49] [PASSED] no-and-no
[05:14:49] [PASSED] no-and-yes
[05:14:49] [PASSED] yes-and-no
[05:14:49] [PASSED] yes-and-yes
[05:14:49] [PASSED] no-or-no
[05:14:49] [PASSED] no-or-yes
[05:14:49] [PASSED] yes-or-no
[05:14:49] [PASSED] yes-or-yes
[05:14:49] [PASSED] no-yes-or-yes-no
[05:14:49] [PASSED] no-yes-or-yes-yes
[05:14:49] [PASSED] yes-yes-or-no-yes
[05:14:49] [PASSED] yes-yes-or-yes-yes
[05:14:49] [PASSED] no-no-or-yes-or-no
[05:14:49] [PASSED] or
[05:14:49] [PASSED] or-yes
[05:14:49] [PASSED] or-no
[05:14:49] [PASSED] yes-or
[05:14:49] [PASSED] no-or
[05:14:49] [PASSED] no-or-or-yes
[05:14:49] [PASSED] yes-or-or-no
[05:14:49] [PASSED] no-or-or-no
[05:14:49] [PASSED] missing-context-engine-class
[05:14:49] [PASSED] missing-context-engine-class-or-yes
[05:14:49] [PASSED] missing-context-engine-class-or-or-yes
[05:14:49] =============== [PASSED] xe_rtp_rules_tests ================
[05:14:49] =============== xe_rtp_process_to_sr_tests  ================
[05:14:49] [PASSED] coalesce-same-reg
[05:14:49] [PASSED] coalesce-same-reg-literal-and-func
[05:14:49] [PASSED] no-match-no-add
[05:14:49] [PASSED] two-regs-two-entries
[05:14:49] [PASSED] clr-one-set-other
[05:14:49] [PASSED] set-field
[05:14:49] [PASSED] conflict-duplicate
[05:14:49] [PASSED] conflict-not-disjoint
[05:14:49] [PASSED] conflict-not-disjoint-literal-and-func
[05:14:49] [PASSED] conflict-reg-type
[05:14:49] [PASSED] bad-mcr-reg-forced-to-regular
[05:14:49] [PASSED] bad-regular-reg-forced-to-mcr
[05:14:49] =========== [PASSED] xe_rtp_process_to_sr_tests ============
[05:14:49] ================== xe_rtp_process_tests  ===================
[05:14:49] [PASSED] active1
[05:14:49] [PASSED] active2
[05:14:49] [PASSED] active-inactive
[05:14:49] [PASSED] inactive-active
[05:14:49] [PASSED] inactive-active-inactive
[05:14:49] [PASSED] inactive-inactive-inactive
[05:14:49] ============== [PASSED] xe_rtp_process_tests ===============
[05:14:49] ===================== [PASSED] xe_rtp ======================
[05:14:49] ==================== xe_wa (1 subtest) =====================
[05:14:49] ======================== xe_wa_gt  =========================
[05:14:49] [PASSED] TIGERLAKE B0
[05:14:49] [PASSED] DG1 A0
[05:14:49] [PASSED] DG1 B0
[05:14:49] [PASSED] ALDERLAKE_S A0
[05:14:49] [PASSED] ALDERLAKE_S B0
[05:14:49] [PASSED] ALDERLAKE_S C0
[05:14:49] [PASSED] ALDERLAKE_S D0
[05:14:49] [PASSED] ALDERLAKE_P A0
[05:14:49] [PASSED] ALDERLAKE_P B0
[05:14:49] [PASSED] ALDERLAKE_P C0
[05:14:49] [PASSED] ALDERLAKE_S RPLS D0
[05:14:49] [PASSED] ALDERLAKE_P RPLU E0
[05:14:49] [PASSED] DG2 G10 C0
[05:14:49] [PASSED] DG2 G11 B1
[05:14:49] [PASSED] DG2 G12 A1
[05:14:49] [PASSED] METEORLAKE 12.70(Xe_LPG) A0 13.00(Xe_LPM+) A0
[05:14:49] [PASSED] METEORLAKE 12.71(Xe_LPG) A0 13.00(Xe_LPM+) A0
[05:14:49] [PASSED] METEORLAKE 12.74(Xe_LPG+) A0 13.00(Xe_LPM+) A0
[05:14:49] [PASSED] LUNARLAKE 20.04(Xe2_LPG) A0 20.00(Xe2_LPM) A0
[05:14:49] [PASSED] LUNARLAKE 20.04(Xe2_LPG) B0 20.00(Xe2_LPM) A0
[05:14:49] [PASSED] BATTLEMAGE 20.01(Xe2_HPG) A0 13.01(Xe2_HPM) A1
[05:14:49] [PASSED] PANTHERLAKE 30.00(Xe3_LPG) A0 30.00(Xe3_LPM) A0
[05:14:49] ==================== [PASSED] xe_wa_gt =====================
[05:14:49] ====================== [PASSED] xe_wa ======================
[05:14:49] ============================================================
[05:14:49] Testing complete. Ran 793 tests: passed: 765, skipped: 28
[05:14:49] Elapsed time: 36.306s total, 1.844s configuring, 33.745s building, 0.708s running

+ for kcfg in "${kunitconfigs[@]}"
+ [[ ! -f /kernel/drivers/gpu/drm/tests/.kunitconfig ]]
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/tests/.kunitconfig [05:14:49] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[05:14:51] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[05:15:15] Starting KUnit Kernel (1/1)...
[05:15:15] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[05:15:15] ============= refcount_interrupt (4 subtests) ==============
[05:15:15] [PASSED] test_single_irq_change
[05:15:15] [PASSED] test_nested_irq_change
[05:15:15] [PASSED] test_multiple_irq_change
[05:15:15] [PASSED] test_irq_save
[05:15:15] =============== [PASSED] refcount_interrupt ================
[05:15:15] ============ drm_test_pick_cmdline (2 subtests) ============
[05:15:15] [PASSED] drm_test_pick_cmdline_res_1920_1080_60
[05:15:15] =============== drm_test_pick_cmdline_named  ===============
[05:15:15] [PASSED] NTSC
[05:15:15] [PASSED] NTSC-J
[05:15:15] [PASSED] PAL
[05:15:15] [PASSED] PAL-M
[05:15:15] =========== [PASSED] drm_test_pick_cmdline_named ===========
[05:15:15] ============== [PASSED] drm_test_pick_cmdline ==============
[05:15:15] == drm_test_atomic_get_connector_for_encoder (1 subtest) ===
[05:15:15] [PASSED] drm_test_drm_atomic_get_connector_for_encoder
[05:15:15] ==== [PASSED] drm_test_atomic_get_connector_for_encoder ====
[05:15:15] =========== drm_validate_clone_mode (2 subtests) ===========
[05:15:15] ============== drm_test_check_in_clone_mode  ===============
[05:15:15] [PASSED] in_clone_mode
[05:15:15] [PASSED] not_in_clone_mode
[05:15:15] ========== [PASSED] drm_test_check_in_clone_mode ===========
[05:15:15] =============== drm_test_check_valid_clones  ===============
[05:15:15] [PASSED] not_in_clone_mode
[05:15:15] [PASSED] valid_clone
[05:15:15] [PASSED] invalid_clone
[05:15:15] =========== [PASSED] drm_test_check_valid_clones ===========
[05:15:15] ============= [PASSED] drm_validate_clone_mode =============
[05:15:15] ============= drm_validate_modeset (1 subtest) =============
[05:15:15] [PASSED] drm_test_check_connector_changed_modeset
[05:15:15] ============== [PASSED] drm_validate_modeset ===============
[05:15:15] ====== drm_test_bridge_get_current_state (1 subtest) =======
[05:15:15] [PASSED] drm_test_drm_bridge_get_current_state_atomic
[05:15:15] ======== [PASSED] drm_test_bridge_get_current_state ========
[05:15:15] ====== drm_test_bridge_helper_reset_crtc (3 subtests) ======
[05:15:15] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic
[05:15:15] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic_disabled
[05:15:15] [PASSED] drm_test_drm_bridge_helper_hdmi_output_bus_fmts
[05:15:15] ======== [PASSED] drm_test_bridge_helper_reset_crtc ========
[05:15:15] ============== drm_bridge_alloc (2 subtests) ===============
[05:15:15] [PASSED] drm_test_drm_bridge_alloc_basic
[05:15:15] [PASSED] drm_test_drm_bridge_alloc_get_put
[05:15:15] ================ [PASSED] drm_bridge_alloc =================
[05:15:15] ============= drm_bridge_bus_fmt (5 subtests) ==============
[05:15:15] [PASSED] drm_test_bridge_rgb_yuv_rgb
[05:15:15] [PASSED] drm_test_bridge_must_convert_to_yuv444
[05:15:15] [PASSED] drm_test_bridge_hdmi_auto_rgb
[05:15:15] [PASSED] drm_test_bridge_auto_first
[05:15:15] [PASSED] drm_test_bridge_rgb_yuv_no_path
[05:15:15] =============== [PASSED] drm_bridge_bus_fmt ================
[05:15:15] ============= drm_cmdline_parser (40 subtests) =============
[05:15:15] [PASSED] drm_test_cmdline_force_d_only
[05:15:15] [PASSED] drm_test_cmdline_force_D_only_dvi
[05:15:15] [PASSED] drm_test_cmdline_force_D_only_hdmi
[05:15:15] [PASSED] drm_test_cmdline_force_D_only_not_digital
[05:15:15] [PASSED] drm_test_cmdline_force_e_only
[05:15:15] [PASSED] drm_test_cmdline_res
[05:15:15] [PASSED] drm_test_cmdline_res_vesa
[05:15:15] [PASSED] drm_test_cmdline_res_vesa_rblank
[05:15:15] [PASSED] drm_test_cmdline_res_rblank
[05:15:15] [PASSED] drm_test_cmdline_res_bpp
[05:15:15] [PASSED] drm_test_cmdline_res_refresh
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_margins
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_force_off
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_analog
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_digital
[05:15:15] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced_margins_force_on
[05:15:15] [PASSED] drm_test_cmdline_res_margins_force_on
[05:15:15] [PASSED] drm_test_cmdline_res_vesa_margins
[05:15:15] [PASSED] drm_test_cmdline_name
[05:15:15] [PASSED] drm_test_cmdline_name_bpp
[05:15:15] [PASSED] drm_test_cmdline_name_option
[05:15:15] [PASSED] drm_test_cmdline_name_bpp_option
[05:15:15] [PASSED] drm_test_cmdline_rotate_0
[05:15:15] [PASSED] drm_test_cmdline_rotate_90
[05:15:15] [PASSED] drm_test_cmdline_rotate_180
[05:15:15] [PASSED] drm_test_cmdline_rotate_270
[05:15:15] [PASSED] drm_test_cmdline_hmirror
[05:15:15] [PASSED] drm_test_cmdline_vmirror
[05:15:15] [PASSED] drm_test_cmdline_margin_options
[05:15:15] [PASSED] drm_test_cmdline_multiple_options
[05:15:15] [PASSED] drm_test_cmdline_bpp_extra_and_option
[05:15:15] [PASSED] drm_test_cmdline_extra_and_option
[05:15:15] [PASSED] drm_test_cmdline_freestanding_options
[05:15:15] [PASSED] drm_test_cmdline_freestanding_force_e_and_options
[05:15:15] [PASSED] drm_test_cmdline_panel_orientation
[05:15:15] ================ drm_test_cmdline_invalid  =================
[05:15:15] [PASSED] margin_only
[05:15:15] [PASSED] interlace_only
[05:15:15] [PASSED] res_missing_x
[05:15:15] [PASSED] res_missing_y
[05:15:15] [PASSED] res_bad_y
[05:15:15] [PASSED] res_missing_y_bpp
[05:15:15] [PASSED] res_bad_bpp
[05:15:15] [PASSED] res_bad_refresh
[05:15:15] [PASSED] res_bpp_refresh_force_on_off
[05:15:15] [PASSED] res_invalid_mode
[05:15:15] [PASSED] res_bpp_wrong_place_mode
[05:15:15] [PASSED] name_bpp_refresh
[05:15:15] [PASSED] name_refresh
[05:15:15] [PASSED] name_refresh_wrong_mode
[05:15:15] [PASSED] name_refresh_invalid_mode
[05:15:15] [PASSED] rotate_multiple
[05:15:15] [PASSED] rotate_invalid_val
[05:15:15] [PASSED] rotate_truncated
[05:15:15] [PASSED] invalid_option
[05:15:15] [PASSED] invalid_tv_option
[05:15:15] [PASSED] truncated_tv_option
[05:15:15] ============ [PASSED] drm_test_cmdline_invalid =============
[05:15:15] =============== drm_test_cmdline_tv_options  ===============
[05:15:15] [PASSED] NTSC
[05:15:15] [PASSED] NTSC_443
[05:15:15] [PASSED] NTSC_J
[05:15:15] [PASSED] PAL
[05:15:15] [PASSED] PAL_M
[05:15:15] [PASSED] PAL_N
[05:15:15] [PASSED] SECAM
[05:15:15] [PASSED] MONO_525
[05:15:15] [PASSED] MONO_625
[05:15:15] =========== [PASSED] drm_test_cmdline_tv_options ===========
[05:15:15] =============== [PASSED] drm_cmdline_parser ================
[05:15:15] ========== drmm_connector_hdmi_init (20 subtests) ==========
[05:15:15] [PASSED] drm_test_connector_hdmi_init_valid
[05:15:15] [PASSED] drm_test_connector_hdmi_init_bpc_8
[05:15:15] [PASSED] drm_test_connector_hdmi_init_bpc_10
[05:15:15] [PASSED] drm_test_connector_hdmi_init_bpc_12
[05:15:15] [PASSED] drm_test_connector_hdmi_init_bpc_invalid
[05:15:15] [PASSED] drm_test_connector_hdmi_init_bpc_null
[05:15:15] [PASSED] drm_test_connector_hdmi_init_formats_empty
[05:15:15] [PASSED] drm_test_connector_hdmi_init_formats_no_rgb
[05:15:15] === drm_test_connector_hdmi_init_formats_yuv420_allowed  ===
[05:15:15] [PASSED] supported_formats=0x9 yuv420_allowed=1
[05:15:15] [PASSED] supported_formats=0x9 yuv420_allowed=0
[05:15:15] [PASSED] supported_formats=0x5 yuv420_allowed=1
[05:15:15] [PASSED] supported_formats=0x5 yuv420_allowed=0
[05:15:15] === [PASSED] drm_test_connector_hdmi_init_formats_yuv420_allowed ===
[05:15:15] [PASSED] drm_test_connector_hdmi_init_null_ddc
[05:15:15] [PASSED] drm_test_connector_hdmi_init_null_product
[05:15:15] [PASSED] drm_test_connector_hdmi_init_null_vendor
[05:15:15] [PASSED] drm_test_connector_hdmi_init_product_length_exact
[05:15:15] [PASSED] drm_test_connector_hdmi_init_product_length_too_long
[05:15:15] [PASSED] drm_test_connector_hdmi_init_product_valid
[05:15:15] [PASSED] drm_test_connector_hdmi_init_vendor_length_exact
[05:15:15] [PASSED] drm_test_connector_hdmi_init_vendor_length_too_long
[05:15:15] [PASSED] drm_test_connector_hdmi_init_vendor_valid
[05:15:15] ========= drm_test_connector_hdmi_init_type_valid  =========
[05:15:15] [PASSED] HDMI-A
[05:15:15] [PASSED] HDMI-B
[05:15:15] ===== [PASSED] drm_test_connector_hdmi_init_type_valid =====
[05:15:15] ======== drm_test_connector_hdmi_init_type_invalid  ========
[05:15:15] [PASSED] Unknown
[05:15:15] [PASSED] VGA
[05:15:15] [PASSED] DVI-I
[05:15:15] [PASSED] DVI-D
[05:15:15] [PASSED] DVI-A
[05:15:15] [PASSED] Composite
[05:15:15] [PASSED] SVIDEO
[05:15:15] [PASSED] LVDS
[05:15:15] [PASSED] Component
[05:15:15] [PASSED] DIN
[05:15:15] [PASSED] DP
[05:15:15] [PASSED] TV
[05:15:15] [PASSED] eDP
[05:15:15] [PASSED] Virtual
[05:15:15] [PASSED] DSI
[05:15:15] [PASSED] DPI
[05:15:15] [PASSED] Writeback
[05:15:15] [PASSED] SPI
[05:15:15] [PASSED] USB
[05:15:15] ==== [PASSED] drm_test_connector_hdmi_init_type_invalid ====
[05:15:15] ============ [PASSED] drmm_connector_hdmi_init =============
[05:15:15] ============= drmm_connector_init (3 subtests) =============
[05:15:15] [PASSED] drm_test_drmm_connector_init
[05:15:15] [PASSED] drm_test_drmm_connector_init_null_ddc
[05:15:15] ========= drm_test_drmm_connector_init_type_valid  =========
[05:15:15] [PASSED] Unknown
[05:15:15] [PASSED] VGA
[05:15:15] [PASSED] DVI-I
[05:15:15] [PASSED] DVI-D
[05:15:15] [PASSED] DVI-A
[05:15:15] [PASSED] Composite
[05:15:15] [PASSED] SVIDEO
[05:15:15] [PASSED] LVDS
[05:15:15] [PASSED] Component
[05:15:15] [PASSED] DIN
[05:15:15] [PASSED] DP
[05:15:15] [PASSED] HDMI-A
[05:15:15] [PASSED] HDMI-B
[05:15:15] [PASSED] TV
[05:15:15] [PASSED] eDP
[05:15:15] [PASSED] Virtual
[05:15:15] [PASSED] DSI
[05:15:15] [PASSED] DPI
[05:15:15] [PASSED] Writeback
[05:15:15] [PASSED] SPI
[05:15:15] [PASSED] USB
[05:15:15] ===== [PASSED] drm_test_drmm_connector_init_type_valid =====
[05:15:15] =============== [PASSED] drmm_connector_init ===============
[05:15:15] ========= drm_connector_dynamic_init (6 subtests) ==========
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_init
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_init_null_ddc
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_init_not_added
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_init_properties
[05:15:15] ===== drm_test_drm_connector_dynamic_init_type_valid  ======
[05:15:15] [PASSED] Unknown
[05:15:15] [PASSED] VGA
[05:15:15] [PASSED] DVI-I
[05:15:15] [PASSED] DVI-D
[05:15:15] [PASSED] DVI-A
[05:15:15] [PASSED] Composite
[05:15:15] [PASSED] SVIDEO
[05:15:15] [PASSED] LVDS
[05:15:15] [PASSED] Component
[05:15:15] [PASSED] DIN
[05:15:15] [PASSED] DP
[05:15:15] [PASSED] HDMI-A
[05:15:15] [PASSED] HDMI-B
[05:15:15] [PASSED] TV
[05:15:15] [PASSED] eDP
[05:15:15] [PASSED] Virtual
[05:15:15] [PASSED] DSI
[05:15:15] [PASSED] DPI
[05:15:15] [PASSED] Writeback
[05:15:15] [PASSED] SPI
[05:15:15] [PASSED] USB
[05:15:15] = [PASSED] drm_test_drm_connector_dynamic_init_type_valid ==
[05:15:15] ======== drm_test_drm_connector_dynamic_init_name  =========
[05:15:15] [PASSED] Unknown
[05:15:15] [PASSED] VGA
[05:15:15] [PASSED] DVI-I
[05:15:15] [PASSED] DVI-D
[05:15:15] [PASSED] DVI-A
[05:15:15] [PASSED] Composite
[05:15:15] [PASSED] SVIDEO
[05:15:15] [PASSED] LVDS
[05:15:15] [PASSED] Component
[05:15:15] [PASSED] DIN
[05:15:15] [PASSED] DP
[05:15:15] [PASSED] HDMI-A
[05:15:15] [PASSED] HDMI-B
[05:15:15] [PASSED] TV
[05:15:15] [PASSED] eDP
[05:15:15] [PASSED] Virtual
[05:15:15] [PASSED] DSI
[05:15:15] [PASSED] DPI
[05:15:15] [PASSED] Writeback
[05:15:15] [PASSED] SPI
[05:15:15] [PASSED] USB
[05:15:15] ==== [PASSED] drm_test_drm_connector_dynamic_init_name =====
[05:15:15] =========== [PASSED] drm_connector_dynamic_init ============
[05:15:15] ==== drm_connector_dynamic_register_early (4 subtests) =====
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_early_on_list
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_early_defer
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_early_no_init
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_early_no_mode_object
[05:15:15] ====== [PASSED] drm_connector_dynamic_register_early =======
[05:15:15] ======= drm_connector_dynamic_register (7 subtests) ========
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_on_list
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_no_defer
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_no_init
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_mode_object
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_sysfs
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_sysfs_name
[05:15:15] [PASSED] drm_test_drm_connector_dynamic_register_debugfs
[05:15:15] ========= [PASSED] drm_connector_dynamic_register ==========
[05:15:15] = drm_connector_attach_broadcast_rgb_property (2 subtests) =
[05:15:15] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property
[05:15:15] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector
[05:15:15] === [PASSED] drm_connector_attach_broadcast_rgb_property ===
[05:15:15] ========== drm_get_tv_mode_from_name (2 subtests) ==========
[05:15:15] ========== drm_test_get_tv_mode_from_name_valid  ===========
[05:15:15] [PASSED] NTSC
[05:15:15] [PASSED] NTSC-443
[05:15:15] [PASSED] NTSC-J
[05:15:15] [PASSED] PAL
[05:15:15] [PASSED] PAL-M
[05:15:15] [PASSED] PAL-N
[05:15:15] [PASSED] SECAM
[05:15:15] [PASSED] Mono
[05:15:15] ====== [PASSED] drm_test_get_tv_mode_from_name_valid =======
[05:15:15] [PASSED] drm_test_get_tv_mode_from_name_truncated
[05:15:15] ============ [PASSED] drm_get_tv_mode_from_name ============
[05:15:15] = drm_test_connector_hdmi_compute_mode_clock (12 subtests) =
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc_vic_1
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc_vic_1
[05:15:15] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_double
[05:15:15] = drm_test_connector_hdmi_compute_mode_clock_yuv420_valid  =
[05:15:15] [PASSED] VIC 96
[05:15:15] [PASSED] VIC 97
[05:15:15] [PASSED] VIC 101
[05:15:15] [PASSED] VIC 102
[05:15:15] [PASSED] VIC 106
[05:15:15] [PASSED] VIC 107
[05:15:15] === [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_valid ===
[05:15:15] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc
[05:15:15] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc
[05:15:15] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc
[05:15:15] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc
[05:15:15] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc
[05:15:15] === [PASSED] drm_test_connector_hdmi_compute_mode_clock ====
[05:15:15] == drm_hdmi_connector_get_broadcast_rgb_name (2 subtests) ==
[05:15:15] === drm_test_drm_hdmi_connector_get_broadcast_rgb_name  ====
[05:15:15] [PASSED] Automatic
[05:15:15] [PASSED] Full
[05:15:15] [PASSED] Limited 16:235
[05:15:15] === [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name ===
[05:15:15] [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid
[05:15:15] ==== [PASSED] drm_hdmi_connector_get_broadcast_rgb_name ====
[05:15:15] == drm_hdmi_connector_get_output_format_name (2 subtests) ==
[05:15:15] === drm_test_drm_hdmi_connector_get_output_format_name  ====
[05:15:15] [PASSED] RGB
[05:15:15] [PASSED] YUV 4:2:0
[05:15:15] [PASSED] YUV 4:2:2
[05:15:15] [PASSED] YUV 4:4:4
[05:15:15] === [PASSED] drm_test_drm_hdmi_connector_get_output_format_name ===
[05:15:15] [PASSED] drm_test_drm_hdmi_connector_get_output_format_name_invalid
[05:15:15] ==== [PASSED] drm_hdmi_connector_get_output_format_name ====
[05:15:15] ============= drm_damage_helper (21 subtests) ==============
[05:15:15] [PASSED] drm_test_damage_iter_no_damage
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_fractional_src
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_src_moved
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_fractional_src_moved
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_not_visible
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_no_crtc
[05:15:15] [PASSED] drm_test_damage_iter_no_damage_no_fb
[05:15:15] [PASSED] drm_test_damage_iter_simple_damage
[05:15:15] [PASSED] drm_test_damage_iter_single_damage
[05:15:15] [PASSED] drm_test_damage_iter_single_damage_intersect_src
[05:15:15] [PASSED] drm_test_damage_iter_single_damage_outside_src
[05:15:16] [PASSED] drm_test_damage_iter_single_damage_fractional_src
[05:15:16] [PASSED] drm_test_damage_iter_single_damage_intersect_fractional_src
[05:15:16] [PASSED] drm_test_damage_iter_single_damage_outside_fractional_src
[05:15:16] [PASSED] drm_test_damage_iter_single_damage_src_moved
[05:15:16] [PASSED] drm_test_damage_iter_single_damage_fractional_src_moved
[05:15:16] [PASSED] drm_test_damage_iter_damage
[05:15:16] [PASSED] drm_test_damage_iter_damage_one_intersect
[05:15:16] [PASSED] drm_test_damage_iter_damage_one_outside
[05:15:16] [PASSED] drm_test_damage_iter_damage_src_moved
[05:15:16] [PASSED] drm_test_damage_iter_damage_not_visible
[05:15:16] ================ [PASSED] drm_damage_helper ================
[05:15:16] ============== drm_dp_mst_helper (3 subtests) ==============
[05:15:16] ============== drm_test_dp_mst_calc_pbn_mode  ==============
[05:15:16] [PASSED] Clock 154000 BPP 30 DSC disabled
[05:15:16] [PASSED] Clock 234000 BPP 30 DSC disabled
[05:15:16] [PASSED] Clock 297000 BPP 24 DSC disabled
[05:15:16] [PASSED] Clock 332880 BPP 24 DSC enabled
[05:15:16] [PASSED] Clock 324540 BPP 24 DSC enabled
[05:15:16] ========== [PASSED] drm_test_dp_mst_calc_pbn_mode ==========
[05:15:16] ============== drm_test_dp_mst_calc_pbn_div  ===============
[05:15:16] [PASSED] Link rate 2000000 lane count 4
[05:15:16] [PASSED] Link rate 2000000 lane count 2
[05:15:16] [PASSED] Link rate 2000000 lane count 1
[05:15:16] [PASSED] Link rate 1350000 lane count 4
[05:15:16] [PASSED] Link rate 1350000 lane count 2
[05:15:16] [PASSED] Link rate 1350000 lane count 1
[05:15:16] [PASSED] Link rate 1000000 lane count 4
[05:15:16] [PASSED] Link rate 1000000 lane count 2
[05:15:16] [PASSED] Link rate 1000000 lane count 1
[05:15:16] [PASSED] Link rate 810000 lane count 4
[05:15:16] [PASSED] Link rate 810000 lane count 2
[05:15:16] [PASSED] Link rate 810000 lane count 1
[05:15:16] [PASSED] Link rate 540000 lane count 4
[05:15:16] [PASSED] Link rate 540000 lane count 2
[05:15:16] [PASSED] Link rate 540000 lane count 1
[05:15:16] [PASSED] Link rate 270000 lane count 4
[05:15:16] [PASSED] Link rate 270000 lane count 2
[05:15:16] [PASSED] Link rate 270000 lane count 1
[05:15:16] [PASSED] Link rate 162000 lane count 4
[05:15:16] [PASSED] Link rate 162000 lane count 2
[05:15:16] [PASSED] Link rate 162000 lane count 1
[05:15:16] ========== [PASSED] drm_test_dp_mst_calc_pbn_div ===========
[05:15:16] ========= drm_test_dp_mst_sideband_msg_req_decode  =========
[05:15:16] [PASSED] DP_ENUM_PATH_RESOURCES with port number
[05:15:16] [PASSED] DP_POWER_UP_PHY with port number
[05:15:16] [PASSED] DP_POWER_DOWN_PHY with port number
[05:15:16] [PASSED] DP_ALLOCATE_PAYLOAD with SDP stream sinks
[05:15:16] [PASSED] DP_ALLOCATE_PAYLOAD with port number
[05:15:16] [PASSED] DP_ALLOCATE_PAYLOAD with VCPI
[05:15:16] [PASSED] DP_ALLOCATE_PAYLOAD with PBN
[05:15:16] [PASSED] DP_QUERY_PAYLOAD with port number
[05:15:16] [PASSED] DP_QUERY_PAYLOAD with VCPI
[05:15:16] [PASSED] DP_REMOTE_DPCD_READ with port number
[05:15:16] [PASSED] DP_REMOTE_DPCD_READ with DPCD address
[05:15:16] [PASSED] DP_REMOTE_DPCD_READ with max number of bytes
[05:15:16] [PASSED] DP_REMOTE_DPCD_WRITE with port number
[05:15:16] [PASSED] DP_REMOTE_DPCD_WRITE with DPCD address
[05:15:16] [PASSED] DP_REMOTE_DPCD_WRITE with data array
[05:15:16] [PASSED] DP_REMOTE_I2C_READ with port number
[05:15:16] [PASSED] DP_REMOTE_I2C_READ with I2C device ID
[05:15:16] [PASSED] DP_REMOTE_I2C_READ with transactions array
[05:15:16] [PASSED] DP_REMOTE_I2C_WRITE with port number
[05:15:16] [PASSED] DP_REMOTE_I2C_WRITE with I2C device ID
[05:15:16] [PASSED] DP_REMOTE_I2C_WRITE with data array
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream ID
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with client ID
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream event
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with valid stream event
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream behavior
[05:15:16] [PASSED] DP_QUERY_STREAM_ENC_STATUS with a valid stream behavior
[05:15:16] ===== [PASSED] drm_test_dp_mst_sideband_msg_req_decode =====
[05:15:16] ================ [PASSED] drm_dp_mst_helper ================
[05:15:16] ================== drm_exec (7 subtests) ===================
[05:15:16] [PASSED] sanitycheck
[05:15:16] [PASSED] test_lock
[05:15:16] [PASSED] test_lock_unlock
[05:15:16] [PASSED] test_duplicates
[05:15:16] [PASSED] test_prepare
[05:15:16] [PASSED] test_prepare_array
[05:15:16] [PASSED] test_multiple_loops
[05:15:16] ==================== [PASSED] drm_exec =====================
[05:15:16] =========== drm_format_helper_test (17 subtests) ===========
[05:15:16] ============== drm_test_fb_xrgb8888_to_gray8  ==============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========== [PASSED] drm_test_fb_xrgb8888_to_gray8 ==========
[05:15:16] ============= drm_test_fb_xrgb8888_to_rgb332  ==============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb332 ==========
[05:15:16] ============= drm_test_fb_xrgb8888_to_rgb565  ==============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb565 ==========
[05:15:16] ============ drm_test_fb_xrgb8888_to_xrgb1555  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_xrgb1555 =========
[05:15:16] ============ drm_test_fb_xrgb8888_to_argb1555  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_argb1555 =========
[05:15:16] ============ drm_test_fb_xrgb8888_to_rgba5551  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_rgba5551 =========
[05:15:16] ============= drm_test_fb_xrgb8888_to_rgb888  ==============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb888 ==========
[05:15:16] ============= drm_test_fb_xrgb8888_to_bgr888  ==============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========= [PASSED] drm_test_fb_xrgb8888_to_bgr888 ==========
[05:15:16] ============ drm_test_fb_xrgb8888_to_argb8888  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_argb8888 =========
[05:15:16] =========== drm_test_fb_xrgb8888_to_xrgb2101010  ===========
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======= [PASSED] drm_test_fb_xrgb8888_to_xrgb2101010 =======
[05:15:16] =========== drm_test_fb_xrgb8888_to_argb2101010  ===========
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======= [PASSED] drm_test_fb_xrgb8888_to_argb2101010 =======
[05:15:16] ============== drm_test_fb_xrgb8888_to_mono  ===============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ========== [PASSED] drm_test_fb_xrgb8888_to_mono ===========
[05:15:16] ==================== drm_test_fb_swab  =====================
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ================ [PASSED] drm_test_fb_swab =================
[05:15:16] ============ drm_test_fb_xrgb8888_to_xbgr8888  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_xbgr8888 =========
[05:15:16] ============ drm_test_fb_xrgb8888_to_abgr8888  =============
[05:15:16] [PASSED] single_pixel_source_buffer
[05:15:16] [PASSED] single_pixel_clip_rectangle
[05:15:16] [PASSED] well_known_colors
[05:15:16] [PASSED] destination_pitch
[05:15:16] ======== [PASSED] drm_test_fb_xrgb8888_to_abgr8888 =========
[05:15:16] ================= drm_test_fb_clip_offset  =================
[05:15:16] [PASSED] pass through
[05:15:16] [PASSED] horizontal offset
[05:15:16] [PASSED] vertical offset
[05:15:16] [PASSED] horizontal and vertical offset
[05:15:16] [PASSED] horizontal offset (custom pitch)
[05:15:16] [PASSED] vertical offset (custom pitch)
[05:15:16] [PASSED] horizontal and vertical offset (custom pitch)
[05:15:16] ============= [PASSED] drm_test_fb_clip_offset =============
[05:15:16] =================== drm_test_fb_memcpy  ====================
[05:15:16] [PASSED] single_pixel_source_buffer: XR24 little-endian (0x34325258)
[05:15:16] [PASSED] single_pixel_source_buffer: XRA8 little-endian (0x38415258)
[05:15:16] [PASSED] single_pixel_source_buffer: YU24 little-endian (0x34325559)
[05:15:16] [PASSED] single_pixel_clip_rectangle: XB24 little-endian (0x34324258)
[05:15:16] [PASSED] single_pixel_clip_rectangle: XRA8 little-endian (0x38415258)
[05:15:16] [PASSED] single_pixel_clip_rectangle: YU24 little-endian (0x34325559)
[05:15:16] [PASSED] well_known_colors: XB24 little-endian (0x34324258)
[05:15:16] [PASSED] well_known_colors: XRA8 little-endian (0x38415258)
[05:15:16] [PASSED] well_known_colors: YU24 little-endian (0x34325559)
[05:15:16] [PASSED] destination_pitch: XB24 little-endian (0x34324258)
[05:15:16] [PASSED] destination_pitch: XRA8 little-endian (0x38415258)
[05:15:16] [PASSED] destination_pitch: YU24 little-endian (0x34325559)
[05:15:16] =============== [PASSED] drm_test_fb_memcpy ================
[05:15:16] ============= [PASSED] drm_format_helper_test ==============
[05:15:16] ================= drm_format (18 subtests) =================
[05:15:16] [PASSED] drm_test_format_block_width_invalid
[05:15:16] [PASSED] drm_test_format_block_width_one_plane
[05:15:16] [PASSED] drm_test_format_block_width_two_plane
[05:15:16] [PASSED] drm_test_format_block_width_three_plane
[05:15:16] [PASSED] drm_test_format_block_width_tiled
[05:15:16] [PASSED] drm_test_format_block_height_invalid
[05:15:16] [PASSED] drm_test_format_block_height_one_plane
[05:15:16] [PASSED] drm_test_format_block_height_two_plane
[05:15:16] [PASSED] drm_test_format_block_height_three_plane
[05:15:16] [PASSED] drm_test_format_block_height_tiled
[05:15:16] [PASSED] drm_test_format_min_pitch_invalid
[05:15:16] [PASSED] drm_test_format_min_pitch_one_plane_8bpp
[05:15:16] [PASSED] drm_test_format_min_pitch_one_plane_16bpp
[05:15:16] [PASSED] drm_test_format_min_pitch_one_plane_24bpp
[05:15:16] [PASSED] drm_test_format_min_pitch_one_plane_32bpp
[05:15:16] [PASSED] drm_test_format_min_pitch_two_plane
[05:15:16] [PASSED] drm_test_format_min_pitch_three_plane_8bpp
[05:15:16] [PASSED] drm_test_format_min_pitch_tiled
[05:15:16] =================== [PASSED] drm_format ====================
[05:15:16] ============== drm_framebuffer (10 subtests) ===============
[05:15:16] ========== drm_test_framebuffer_check_src_coords  ==========
[05:15:16] [PASSED] Success: source fits into fb
[05:15:16] [PASSED] Fail: overflowing fb with x-axis coordinate
[05:15:16] [PASSED] Fail: overflowing fb with y-axis coordinate
[05:15:16] [PASSED] Fail: overflowing fb with source width
[05:15:16] [PASSED] Fail: overflowing fb with source height
[05:15:16] ====== [PASSED] drm_test_framebuffer_check_src_coords ======
[05:15:16] [PASSED] drm_test_framebuffer_cleanup
[05:15:16] =============== drm_test_framebuffer_create  ===============
[05:15:16] [PASSED] ABGR8888 normal sizes
[05:15:16] [PASSED] ABGR8888 max sizes
[05:15:16] [PASSED] ABGR8888 pitch greater than min required
[05:15:16] [PASSED] ABGR8888 pitch less than min required
[05:15:16] [PASSED] ABGR8888 Invalid width
[05:15:16] [PASSED] ABGR8888 Invalid buffer handle
[05:15:16] [PASSED] No pixel format
[05:15:16] [PASSED] ABGR8888 Width 0
[05:15:16] [PASSED] ABGR8888 Height 0
[05:15:16] [PASSED] ABGR8888 Out of bound height * pitch combination
[05:15:16] [PASSED] ABGR8888 Large buffer offset
[05:15:16] [PASSED] ABGR8888 Buffer offset for inexistent plane
[05:15:16] [PASSED] ABGR8888 Invalid flag
[05:15:16] [PASSED] ABGR8888 Set DRM_MODE_FB_MODIFIERS without modifiers
[05:15:16] [PASSED] ABGR8888 Valid buffer modifier
[05:15:16] [PASSED] ABGR8888 Invalid buffer modifier(DRM_FORMAT_MOD_SAMSUNG_64_32_TILE)
[05:15:16] [PASSED] ABGR8888 Extra pitches without DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] ABGR8888 Extra pitches with DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] NV12 Normal sizes
[05:15:16] [PASSED] NV12 Max sizes
[05:15:16] [PASSED] NV12 Invalid pitch
[05:15:16] [PASSED] NV12 Invalid modifier/missing DRM_MODE_FB_MODIFIERS flag
[05:15:16] [PASSED] NV12 different  modifier per-plane
[05:15:16] [PASSED] NV12 with DRM_FORMAT_MOD_SAMSUNG_64_32_TILE
[05:15:16] [PASSED] NV12 Valid modifiers without DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] NV12 Modifier for inexistent plane
[05:15:16] [PASSED] NV12 Handle for inexistent plane
[05:15:16] [PASSED] NV12 Handle for inexistent plane without DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] YVU420 DRM_MODE_FB_MODIFIERS set without modifier
[05:15:16] [PASSED] YVU420 Normal sizes
[05:15:16] [PASSED] YVU420 Max sizes
[05:15:16] [PASSED] YVU420 Invalid pitch
[05:15:16] [PASSED] YVU420 Different pitches
[05:15:16] [PASSED] YVU420 Different buffer offsets/pitches
[05:15:16] [PASSED] YVU420 Modifier set just for plane 0, without DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] YVU420 Modifier set just for planes 0, 1, without DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] YVU420 Modifier set just for plane 0, 1, with DRM_MODE_FB_MODIFIERS
[05:15:16] [PASSED] YVU420 Valid modifier
[05:15:16] [PASSED] YVU420 Different modifiers per plane
[05:15:16] [PASSED] YVU420 Modifier for inexistent plane
[05:15:16] [PASSED] YUV420_10BIT Invalid modifier(DRM_FORMAT_MOD_LINEAR)
[05:15:16] [PASSED] X0L2 Normal sizes
[05:15:16] [PASSED] X0L2 Max sizes
[05:15:16] [PASSED] X0L2 Invalid pitch
[05:15:16] [PASSED] X0L2 Pitch greater than minimum required
[05:15:16] [PASSED] X0L2 Handle for inexistent plane
[05:15:16] [PASSED] X0L2 Offset for inexistent plane, without DRM_MODE_FB_MODIFIERS set
[05:15:16] [PASSED] X0L2 Modifier without DRM_MODE_FB_MODIFIERS set
[05:15:16] [PASSED] X0L2 Valid modifier
[05:15:16] [PASSED] X0L2 Modifier for inexistent plane
[05:15:16] =========== [PASSED] drm_test_framebuffer_create ===========
[05:15:16] [PASSED] drm_test_framebuffer_free
[05:15:16] [PASSED] drm_test_framebuffer_init
[05:15:16] [PASSED] drm_test_framebuffer_init_bad_format
[05:15:16] [PASSED] drm_test_framebuffer_init_dev_mismatch
[05:15:16] [PASSED] drm_test_framebuffer_lookup
[05:15:16] [PASSED] drm_test_framebuffer_lookup_inexistent
[05:15:16] [PASSED] drm_test_framebuffer_modifiers_not_supported
[05:15:16] ================= [PASSED] drm_framebuffer =================
[05:15:16] ================ drm_gem_shmem (8 subtests) ================
[05:15:16] [PASSED] drm_gem_shmem_test_obj_create
[05:15:16] [PASSED] drm_gem_shmem_test_obj_create_private
[05:15:16] [PASSED] drm_gem_shmem_test_pin_pages
[05:15:16] [PASSED] drm_gem_shmem_test_vmap
[05:15:16] [PASSED] drm_gem_shmem_test_get_sg_table
[05:15:16] [PASSED] drm_gem_shmem_test_get_pages_sgt
[05:15:16] [PASSED] drm_gem_shmem_test_madvise
[05:15:16] [PASSED] drm_gem_shmem_test_purge
[05:15:16] ================== [PASSED] drm_gem_shmem ==================
[05:15:16] === drm_atomic_helper_connector_hdmi_check (29 subtests) ===
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode_vic_1
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode_vic_1
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode_vic_1
[05:15:16] ====== drm_test_check_broadcast_rgb_cea_mode_yuv420  =======
[05:15:16] [PASSED] Automatic
[05:15:16] [PASSED] Full
[05:15:16] [PASSED] Limited 16:235
[05:15:16] == [PASSED] drm_test_check_broadcast_rgb_cea_mode_yuv420 ===
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_changed
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_not_changed
[05:15:16] [PASSED] drm_test_check_disable_connector
[05:15:16] [PASSED] drm_test_check_hdmi_funcs_reject_rate
[05:15:16] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_rgb
[05:15:16] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_yuv420
[05:15:16] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv422
[05:15:16] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv420
[05:15:16] [PASSED] drm_test_check_driver_unsupported_fallback_yuv420
[05:15:16] [PASSED] drm_test_check_output_bpc_crtc_mode_changed
[05:15:16] [PASSED] drm_test_check_output_bpc_crtc_mode_not_changed
[05:15:16] [PASSED] drm_test_check_output_bpc_dvi
[05:15:16] [PASSED] drm_test_check_output_bpc_format_vic_1
[05:15:16] [PASSED] drm_test_check_output_bpc_format_display_8bpc_only
[05:15:16] [PASSED] drm_test_check_output_bpc_format_display_rgb_only
[05:15:16] [PASSED] drm_test_check_output_bpc_format_driver_8bpc_only
[05:15:16] [PASSED] drm_test_check_output_bpc_format_driver_rgb_only
[05:15:16] [PASSED] drm_test_check_tmds_char_rate_rgb_8bpc
[05:15:16] [PASSED] drm_test_check_tmds_char_rate_rgb_10bpc
[05:15:16] [PASSED] drm_test_check_tmds_char_rate_rgb_12bpc
[05:15:16] ============ drm_test_check_hdmi_color_format  =============
[05:15:16] [PASSED] AUTO -> RGB
[05:15:16] [PASSED] YCBCR422 -> YUV422
[05:15:16] [PASSED] YCBCR420 -> YUV420
[05:15:16] [PASSED] YCBCR444 -> YUV444
[05:15:16] [PASSED] RGB -> RGB
[05:15:16] ======== [PASSED] drm_test_check_hdmi_color_format =========
[05:15:16] ======== drm_test_check_hdmi_color_format_420_only  ========
[05:15:16] [PASSED] RGB should fail
[05:15:16] [PASSED] YUV444 should fail
[05:15:16] [PASSED] YUV422 should fail
[05:15:16] [PASSED] YUV420 should work
[05:15:16] ==== [PASSED] drm_test_check_hdmi_color_format_420_only ====
[05:15:16] ===== [PASSED] drm_atomic_helper_connector_hdmi_check ======
[05:15:16] === drm_atomic_helper_connector_hdmi_reset (6 subtests) ====
[05:15:16] [PASSED] drm_test_check_broadcast_rgb_value
[05:15:16] [PASSED] drm_test_check_bpc_8_value
[05:15:16] [PASSED] drm_test_check_bpc_10_value
[05:15:16] [PASSED] drm_test_check_bpc_12_value
[05:15:16] [PASSED] drm_test_check_format_value
[05:15:16] [PASSED] drm_test_check_tmds_char_value
[05:15:16] ===== [PASSED] drm_atomic_helper_connector_hdmi_reset ======
[05:15:16] = drm_atomic_helper_connector_hdmi_mode_valid (7 subtests) =
[05:15:16] [PASSED] drm_test_check_mode_valid
[05:15:16] [PASSED] drm_test_check_mode_valid_reject
[05:15:16] [PASSED] drm_test_check_mode_valid_reject_rate
[05:15:16] [PASSED] drm_test_check_mode_valid_reject_max_clock
[05:15:16] [PASSED] drm_test_check_mode_valid_yuv420_only_max_clock
[05:15:16] [PASSED] drm_test_check_mode_valid_reject_yuv420_only_connector
[05:15:16] [PASSED] drm_test_check_mode_valid_accept_yuv420_also_connector_rgb
[05:15:16] === [PASSED] drm_atomic_helper_connector_hdmi_mode_valid ===
[05:15:16] = drm_atomic_helper_connector_hdmi_infoframes (5 subtests) =
[05:15:16] [PASSED] drm_test_check_infoframes
[05:15:16] [PASSED] drm_test_check_reject_avi_infoframe
[05:15:16] [PASSED] drm_test_check_reject_hdr_infoframe_bpc_8
[05:15:16] [PASSED] drm_test_check_reject_hdr_infoframe_bpc_10
[05:15:16] [PASSED] drm_test_check_reject_audio_infoframe
[05:15:16] === [PASSED] drm_atomic_helper_connector_hdmi_infoframes ===
[05:15:16] ================= drm_managed (2 subtests) =================
[05:15:16] [PASSED] drm_test_managed_release_action
[05:15:16] [PASSED] drm_test_managed_run_action
[05:15:16] =================== [PASSED] drm_managed ===================
[05:15:16] =================== drm_mm (6 subtests) ====================
[05:15:16] [PASSED] drm_test_mm_init
[05:15:16] [PASSED] drm_test_mm_debug
[05:15:16] [PASSED] drm_test_mm_align32
[05:15:16] [PASSED] drm_test_mm_align64
[05:15:16] [PASSED] drm_test_mm_lowest
[05:15:16] [PASSED] drm_test_mm_highest
[05:15:16] ===================== [PASSED] drm_mm ======================
[05:15:16] ============= drm_modes_analog_tv (5 subtests) =============
[05:15:16] [PASSED] drm_test_modes_analog_tv_mono_576i
[05:15:16] [PASSED] drm_test_modes_analog_tv_ntsc_480i
[05:15:16] [PASSED] drm_test_modes_analog_tv_ntsc_480i_inlined
[05:15:16] [PASSED] drm_test_modes_analog_tv_pal_576i
[05:15:16] [PASSED] drm_test_modes_analog_tv_pal_576i_inlined
[05:15:16] =============== [PASSED] drm_modes_analog_tv ===============
[05:15:16] ============== drm_plane_helper (2 subtests) ===============
[05:15:16] =============== drm_test_check_plane_state  ================
[05:15:16] [PASSED] clipping_simple
[05:15:16] [PASSED] clipping_rotate_reflect
[05:15:16] [PASSED] positioning_simple
[05:15:16] [PASSED] upscaling
[05:15:16] [PASSED] downscaling
[05:15:16] [PASSED] rounding1
[05:15:16] [PASSED] rounding2
[05:15:16] [PASSED] rounding3
[05:15:16] [PASSED] rounding4
[05:15:16] =========== [PASSED] drm_test_check_plane_state ============
[05:15:16] =========== drm_test_check_invalid_plane_state  ============
[05:15:16] [PASSED] positioning_invalid
[05:15:16] [PASSED] upscaling_invalid
[05:15:16] [PASSED] downscaling_invalid
[05:15:16] ======= [PASSED] drm_test_check_invalid_plane_state ========
[05:15:16] ================ [PASSED] drm_plane_helper =================
[05:15:16] ====== drm_connector_helper_tv_get_modes (1 subtest) =======
[05:15:16] ====== drm_test_connector_helper_tv_get_modes_check  =======
[05:15:16] [PASSED] None
[05:15:16] [PASSED] PAL
[05:15:16] [PASSED] NTSC
[05:15:16] [PASSED] Both, NTSC Default
[05:15:16] [PASSED] Both, PAL Default
[05:15:16] [PASSED] Both, NTSC Default, with PAL on command-line
[05:15:16] [PASSED] Both, PAL Default, with NTSC on command-line
[05:15:16] == [PASSED] drm_test_connector_helper_tv_get_modes_check ===
[05:15:16] ======== [PASSED] drm_connector_helper_tv_get_modes ========
[05:15:16] ================== drm_rect (9 subtests) ===================
[05:15:16] [PASSED] drm_test_rect_clip_scaled_div_by_zero
[05:15:16] [PASSED] drm_test_rect_clip_scaled_not_clipped
[05:15:16] [PASSED] drm_test_rect_clip_scaled_clipped
[05:15:16] [PASSED] drm_test_rect_clip_scaled_signed_vs_unsigned
[05:15:16] ================= drm_test_rect_intersect  =================
[05:15:16] [PASSED] top-left x bottom-right: 2x2+1+1 x 2x2+0+0
[05:15:16] [PASSED] top-right x bottom-left: 2x2+0+0 x 2x2+1-1
[05:15:16] [PASSED] bottom-left x top-right: 2x2+1-1 x 2x2+0+0
[05:15:16] [PASSED] bottom-right x top-left: 2x2+0+0 x 2x2+1+1
[05:15:16] [PASSED] right x left: 2x1+0+0 x 3x1+1+0
[05:15:16] [PASSED] left x right: 3x1+1+0 x 2x1+0+0
[05:15:16] [PASSED] up x bottom: 1x2+0+0 x 1x3+0-1
[05:15:16] [PASSED] bottom x up: 1x3+0-1 x 1x2+0+0
[05:15:16] [PASSED] touching corner: 1x1+0+0 x 2x2+1+1
[05:15:16] [PASSED] touching side: 1x1+0+0 x 1x1+1+0
[05:15:16] [PASSED] equal rects: 2x2+0+0 x 2x2+0+0
[05:15:16] [PASSED] inside another: 2x2+0+0 x 1x1+1+1
[05:15:16] [PASSED] far away: 1x1+0+0 x 1x1+3+6
[05:15:16] [PASSED] points intersecting: 0x0+5+10 x 0x0+5+10
[05:15:16] [PASSED] points not intersecting: 0x0+0+0 x 0x0+5+10
[05:15:16] ============= [PASSED] drm_test_rect_intersect =============
[05:15:16] ================ drm_test_rect_calc_hscale  ================
[05:15:16] [PASSED] normal use
[05:15:16] [PASSED] out of max range
[05:15:16] [PASSED] out of min range
[05:15:16] [PASSED] zero dst
[05:15:16] [PASSED] negative src
[05:15:16] [PASSED] negative dst
[05:15:16] ============ [PASSED] drm_test_rect_calc_hscale ============
[05:15:16] ================ drm_test_rect_calc_vscale  ================
[05:15:16] [PASSED] normal use
[05:15:16] [PASSED] out of max range
[05:15:16] [PASSED] out of min range
[05:15:16] [PASSED] zero dst
[05:15:16] [PASSED] negative src
[05:15:16] [PASSED] negative dst
[05:15:16] ============ [PASSED] drm_test_rect_calc_vscale ============
[05:15:16] ================== drm_test_rect_rotate  ===================
[05:15:16] [PASSED] reflect-x
[05:15:16] [PASSED] reflect-y
[05:15:16] [PASSED] rotate-0
[05:15:16] [PASSED] rotate-90
[05:15:16] [PASSED] rotate-180
[05:15:16] [PASSED] rotate-270
[05:15:16] ============== [PASSED] drm_test_rect_rotate ===============
[05:15:16] ================ drm_test_rect_rotate_inv  =================
[05:15:16] [PASSED] reflect-x
[05:15:16] [PASSED] reflect-y
[05:15:16] [PASSED] rotate-0
[05:15:16] [PASSED] rotate-90
[05:15:16] [PASSED] rotate-180
[05:15:16] [PASSED] rotate-270
[05:15:16] ============ [PASSED] drm_test_rect_rotate_inv =============
[05:15:16] ==================== [PASSED] drm_rect =====================
[05:15:16] ============ drm_sysfb_modeset_test (1 subtest) ============
[05:15:16] ============ drm_test_sysfb_build_fourcc_list  =============
[05:15:16] [PASSED] no native formats
[05:15:16] [PASSED] XRGB8888 as native format
[05:15:16] [PASSED] remove duplicates
[05:15:16] [PASSED] convert alpha formats
[05:15:16] [PASSED] random formats
[05:15:16] ======== [PASSED] drm_test_sysfb_build_fourcc_list =========
[05:15:16] ============= [PASSED] drm_sysfb_modeset_test ==============
[05:15:16] ================== drm_fixp (2 subtests) ===================
[05:15:16] [PASSED] drm_test_int2fixp
[05:15:16] [PASSED] drm_test_sm2fixp
[05:15:16] ==================== [PASSED] drm_fixp =====================
[05:15:16] ============================================================
[05:15:16] Testing complete. Ran 641 tests: passed: 641
[05:15:16] Elapsed time: 26.466s total, 1.803s configuring, 24.494s building, 0.143s running

+ for kcfg in "${kunitconfigs[@]}"
+ [[ ! -f /kernel/drivers/gpu/drm/ttm/tests/.kunitconfig ]]
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/ttm/tests/.kunitconfig [05:15:16] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[05:15:18] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[05:15:28] Starting KUnit Kernel (1/1)...
[05:15:28] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[05:15:28] ============= refcount_interrupt (4 subtests) ==============
[05:15:28] [PASSED] test_single_irq_change
[05:15:28] [PASSED] test_nested_irq_change
[05:15:28] [PASSED] test_multiple_irq_change
[05:15:28] [PASSED] test_irq_save
[05:15:28] =============== [PASSED] refcount_interrupt ================
[05:15:28] ================= ttm_device (5 subtests) ==================
[05:15:28] [PASSED] ttm_device_init_basic
[05:15:28] [PASSED] ttm_device_init_multiple
[05:15:28] [PASSED] ttm_device_fini_basic
[05:15:28] [PASSED] ttm_device_init_no_vma_man
[05:15:28] ================== ttm_device_init_pools  ==================
[05:15:28] [PASSED] No DMA allocations, no DMA32 required
[05:15:28] [PASSED] DMA allocations, DMA32 required
[05:15:28] [PASSED] No DMA allocations, DMA32 required
[05:15:28] [PASSED] DMA allocations, no DMA32 required
[05:15:28] ============== [PASSED] ttm_device_init_pools ==============
[05:15:28] =================== [PASSED] ttm_device ====================
[05:15:28] ================== ttm_pool (8 subtests) ===================
[05:15:28] ================== ttm_pool_alloc_basic  ===================
[05:15:28] [PASSED] One page
[05:15:28] [PASSED] More than one page
[05:15:28] [PASSED] Above the allocation limit
[05:15:28] [PASSED] One page, with coherent DMA mappings enabled
[05:15:28] [PASSED] Above the allocation limit, with coherent DMA mappings enabled
[05:15:28] ============== [PASSED] ttm_pool_alloc_basic ===============
[05:15:28] ============== ttm_pool_alloc_basic_dma_addr  ==============
[05:15:28] [PASSED] One page
[05:15:28] [PASSED] More than one page
[05:15:28] [PASSED] Above the allocation limit
[05:15:28] [PASSED] One page, with coherent DMA mappings enabled
[05:15:28] [PASSED] Above the allocation limit, with coherent DMA mappings enabled
[05:15:28] ========== [PASSED] ttm_pool_alloc_basic_dma_addr ==========
[05:15:28] [PASSED] ttm_pool_alloc_order_caching_match
[05:15:28] [PASSED] ttm_pool_alloc_caching_mismatch
[05:15:28] [PASSED] ttm_pool_alloc_order_mismatch
[05:15:28] [PASSED] ttm_pool_free_dma_alloc
[05:15:28] [PASSED] ttm_pool_free_no_dma_alloc
[05:15:28] [PASSED] ttm_pool_fini_basic
[05:15:28] ==================== [PASSED] ttm_pool =====================
[05:15:28] ================ ttm_resource (8 subtests) =================
[05:15:28] ================= ttm_resource_init_basic  =================
[05:15:28] [PASSED] Init resource in TTM_PL_SYSTEM
[05:15:28] [PASSED] Init resource in TTM_PL_VRAM
[05:15:28] [PASSED] Init resource in a private placement
[05:15:28] [PASSED] Init resource in TTM_PL_SYSTEM, set placement flags
[05:15:28] ============= [PASSED] ttm_resource_init_basic =============
[05:15:28] [PASSED] ttm_resource_init_pinned
[05:15:28] [PASSED] ttm_resource_fini_basic
[05:15:28] [PASSED] ttm_resource_manager_init_basic
[05:15:28] [PASSED] ttm_resource_manager_usage_basic
[05:15:28] [PASSED] ttm_resource_manager_set_used_basic
[05:15:28] [PASSED] ttm_sys_man_alloc_basic
[05:15:28] [PASSED] ttm_sys_man_free_basic
[05:15:28] ================== [PASSED] ttm_resource ===================
[05:15:28] =================== ttm_tt (15 subtests) ===================
[05:15:28] ==================== ttm_tt_init_basic  ====================
[05:15:28] [PASSED] Page-aligned size
[05:15:28] [PASSED] Extra pages requested
[05:15:28] ================ [PASSED] ttm_tt_init_basic ================
[05:15:28] [PASSED] ttm_tt_init_misaligned
[05:15:28] [PASSED] ttm_tt_fini_basic
[05:15:28] [PASSED] ttm_tt_fini_sg
[05:15:28] [PASSED] ttm_tt_fini_shmem
[05:15:28] [PASSED] ttm_tt_create_basic
[05:15:28] [PASSED] ttm_tt_create_invalid_bo_type
[05:15:28] [PASSED] ttm_tt_create_ttm_exists
[05:15:28] [PASSED] ttm_tt_create_failed
[05:15:28] [PASSED] ttm_tt_destroy_basic
[05:15:28] [PASSED] ttm_tt_populate_null_ttm
[05:15:28] [PASSED] ttm_tt_populate_populated_ttm
[05:15:28] [PASSED] ttm_tt_unpopulate_basic
[05:15:28] [PASSED] ttm_tt_unpopulate_empty_ttm
[05:15:28] [PASSED] ttm_tt_swapin_basic
[05:15:28] ===================== [PASSED] ttm_tt ======================
[05:15:28] =================== ttm_bo (14 subtests) ===================
[05:15:28] =========== ttm_bo_reserve_optimistic_no_ticket  ===========
[05:15:28] [PASSED] Cannot be interrupted and sleeps
[05:15:28] [PASSED] Cannot be interrupted, locks straight away
[05:15:28] [PASSED] Can be interrupted, sleeps
[05:15:28] ======= [PASSED] ttm_bo_reserve_optimistic_no_ticket =======
[05:15:28] [PASSED] ttm_bo_reserve_locked_no_sleep
[05:15:28] [PASSED] ttm_bo_reserve_no_wait_ticket
[05:15:28] [PASSED] ttm_bo_reserve_double_resv
[05:15:28] [PASSED] ttm_bo_reserve_interrupted
[05:15:28] [PASSED] ttm_bo_reserve_deadlock
[05:15:28] [PASSED] ttm_bo_unreserve_basic
[05:15:28] [PASSED] ttm_bo_unreserve_pinned
[05:15:28] [PASSED] ttm_bo_unreserve_bulk
[05:15:28] [PASSED] ttm_bo_fini_basic
[05:15:28] [PASSED] ttm_bo_fini_shared_resv
[05:15:28] [PASSED] ttm_bo_pin_basic
[05:15:28] [PASSED] ttm_bo_pin_unpin_resource
[05:15:28] [PASSED] ttm_bo_multiple_pin_one_unpin
[05:15:28] ===================== [PASSED] ttm_bo ======================
[05:15:28] ============== ttm_bo_validate (22 subtests) ===============
[05:15:28] ============== ttm_bo_init_reserved_sys_man  ===============
[05:15:28] [PASSED] Buffer object for userspace
[05:15:28] [PASSED] Kernel buffer object
[05:15:28] [PASSED] Shared buffer object
[05:15:28] ========== [PASSED] ttm_bo_init_reserved_sys_man ===========
[05:15:28] ============== ttm_bo_init_reserved_mock_man  ==============
[05:15:28] [PASSED] Buffer object for userspace
[05:15:28] [PASSED] Kernel buffer object
[05:15:28] [PASSED] Shared buffer object
[05:15:28] ========== [PASSED] ttm_bo_init_reserved_mock_man ==========
[05:15:28] [PASSED] ttm_bo_init_reserved_resv
[05:15:28] ================== ttm_bo_validate_basic  ==================
[05:15:28] [PASSED] Buffer object for userspace
[05:15:28] [PASSED] Kernel buffer object
[05:15:28] [PASSED] Shared buffer object
[05:15:28] ============== [PASSED] ttm_bo_validate_basic ==============
[05:15:28] [PASSED] ttm_bo_validate_invalid_placement
[05:15:28] ============= ttm_bo_validate_same_placement  ==============
[05:15:28] [PASSED] System manager
[05:15:28] [PASSED] VRAM manager
[05:15:28] ========= [PASSED] ttm_bo_validate_same_placement ==========
[05:15:28] [PASSED] ttm_bo_validate_failed_alloc
[05:15:28] [PASSED] ttm_bo_validate_pinned
[05:15:28] [PASSED] ttm_bo_validate_busy_placement
[05:15:28] ================ ttm_bo_validate_multihop  =================
[05:15:28] [PASSED] Buffer object for userspace
[05:15:28] [PASSED] Kernel buffer object
[05:15:28] [PASSED] Shared buffer object
[05:15:28] ============ [PASSED] ttm_bo_validate_multihop =============
[05:15:28] ========== ttm_bo_validate_no_placement_signaled  ==========
[05:15:28] [PASSED] Buffer object in system domain, no page vector
[05:15:28] [PASSED] Buffer object in system domain with an existing page vector
[05:15:28] ====== [PASSED] ttm_bo_validate_no_placement_signaled ======
[05:15:28] ======== ttm_bo_validate_no_placement_not_signaled  ========
[05:15:28] [PASSED] Buffer object for userspace
[05:15:28] [PASSED] Kernel buffer object
[05:15:28] [PASSED] Shared buffer object
[05:15:28] ==== [PASSED] ttm_bo_validate_no_placement_not_signaled ====
[05:15:28] [PASSED] ttm_bo_validate_move_fence_signaled
[05:15:28] ========= ttm_bo_validate_move_fence_not_signaled  =========
[05:15:28] [PASSED] Waits for GPU
[05:15:28] [PASSED] Tries to lock straight away
[05:15:28] ===== [PASSED] ttm_bo_validate_move_fence_not_signaled =====
[05:15:28] [PASSED] ttm_bo_validate_swapout
[05:15:28] [PASSED] ttm_bo_validate_happy_evict
[05:15:28] [PASSED] ttm_bo_validate_all_pinned_evict
[05:15:28] [PASSED] ttm_bo_validate_allowed_only_evict
[05:15:28] [PASSED] ttm_bo_validate_deleted_evict
[05:15:28] [PASSED] ttm_bo_validate_busy_domain_evict
[05:15:28] [PASSED] ttm_bo_validate_evict_gutting
[05:15:28] [PASSED] ttm_bo_validate_recrusive_evict
[05:15:28] ================= [PASSED] ttm_bo_validate =================
[05:15:28] ============================================================
[05:15:28] Testing complete. Ran 106 tests: passed: 106
[05:15:28] Elapsed time: 12.105s total, 1.845s configuring, 10.045s building, 0.184s running

+ for kcfg in "${kunitconfigs[@]}"
+ [[ ! -f /kernel/drivers/dma-buf/.kunitconfig ]]
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/dma-buf/.kunitconfig [05:15:28] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:

$ make ARCH=um O=.kunit olddefconfig
[05:15:30] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48
[05:15:39] Starting KUnit Kernel (1/1)...
[05:15:39] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[05:15:39] ============= refcount_interrupt (4 subtests) ==============
[05:15:39] [PASSED] test_single_irq_change
[05:15:39] [PASSED] test_nested_irq_change
[05:15:39] [PASSED] test_multiple_irq_change
[05:15:39] [PASSED] test_irq_save
[05:15:39] =============== [PASSED] refcount_interrupt ================
[05:15:39] =============== dma-buf-fence (12 subtests) ================
[05:15:39] [PASSED] test_sanitycheck
[05:15:39] [PASSED] test_signaling
[05:15:39] [PASSED] test_add_callback
[05:15:39] [PASSED] test_late_add_callback
[05:15:39] [PASSED] test_rm_callback
[05:15:39] [PASSED] test_late_rm_callback
[05:15:39] [PASSED] test_status
[05:15:39] [PASSED] test_error
[05:15:39] [PASSED] test_wait
[05:15:39] [PASSED] test_wait_timeout
[05:15:39] [PASSED] test_stub
[05:15:39] [SKIPPED] test_race_signal_callback (requires at least 2 CPUs)
[05:15:39] ================== [PASSED] dma-buf-fence ==================
[05:15:39] ============ dma-buf-fence-chain (11 subtests) =============
[05:15:39] [PASSED] test_sanitycheck
[05:15:39] [PASSED] test_find_seqno
[05:15:39] [PASSED] test_find_signaled
[05:15:39] [PASSED] test_find_out_of_order
[05:15:44] [PASSED] test_find_gap
[05:15:44] [PASSED] test_find_race
[05:15:44] [PASSED] test_signal_forward
[05:15:44] [PASSED] test_signal_backward
[05:15:44] [PASSED] test_wait_forward
[05:15:44] [PASSED] test_wait_backward
[05:15:44] [PASSED] test_wait_random
[05:15:44] =============== [PASSED] dma-buf-fence-chain ===============
[05:15:44] ============ dma-buf-fence-unwrap (10 subtests) ============
[05:15:44] [PASSED] test_sanitycheck
[05:15:44] [PASSED] test_unwrap_array
[05:15:44] [PASSED] test_unwrap_chain
[05:15:44] [PASSED] test_unwrap_chain_array
[05:15:44] [PASSED] test_unwrap_merge
[05:15:44] [PASSED] test_unwrap_merge_duplicate
[05:15:44] [PASSED] test_unwrap_merge_seqno
[05:15:44] [PASSED] test_unwrap_merge_order
[05:15:44] [PASSED] test_unwrap_merge_complex
[05:15:44] [PASSED] test_unwrap_merge_complex_seqno
[05:15:44] ============== [PASSED] dma-buf-fence-unwrap ===============
[05:15:44] ================ dma-buf-resv (5 subtests) =================
[05:15:44] [PASSED] test_sanitycheck
[05:15:44] ===================== test_signaling  ======================
[05:15:44] [PASSED] kernel
[05:15:44] [PASSED] write
[05:15:44] [PASSED] read
[05:15:44] [PASSED] bookkeep
[05:15:44] ================= [PASSED] test_signaling ==================
[05:15:44] ====================== test_for_each  ======================
[05:15:44] [PASSED] kernel
[05:15:44] [PASSED] write
[05:15:44] [PASSED] read
[05:15:44] [PASSED] bookkeep
[05:15:44] ================== [PASSED] test_for_each ==================
[05:15:44] ================= test_for_each_unlocked  ==================
[05:15:44] [PASSED] kernel
[05:15:44] [PASSED] write
[05:15:44] [PASSED] read
[05:15:44] [PASSED] bookkeep
[05:15:44] ============= [PASSED] test_for_each_unlocked ==============
[05:15:44] ===================== test_get_fences  =====================
[05:15:44] [PASSED] kernel
[05:15:44] [PASSED] write
[05:15:44] [PASSED] read
[05:15:44] [PASSED] bookkeep
[05:15:44] ================= [PASSED] test_get_fences =================
[05:15:44] ================== [PASSED] dma-buf-resv ===================
[05:15:44] ============================================================
[05:15:44] Testing complete. Ran 54 tests: passed: 53, skipped: 1
[05:15:44] Elapsed time: 15.932s total, 1.858s configuring, 8.702s building, 5.334s running

+ cleanup
++ stat -c %u:%g /kernel
+ chown -R 1003:1003 /kernel

#30 lore raw

✓ i915.CI.BAT: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138257/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_19156 -> Patchwork_138257v9
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/index.html

Participating hosts (38 -> 37)
------------------------------

Missing (1): bat-dg2-13

Known issues
------------

Here are the changes found in Patchwork_138257v9 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@runner@aborted:
- bat-mtlp-8: NOTRUN -> [FAIL][1] ([i915#16945])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/bat-mtlp-8/igt@[email protected]

[i915#16945]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16945

Build changes
-------------

* Linux: CI_DRM_19156 -> Patchwork_138257v9

CI-20190529: 20190529
CI_DRM_19156: bb38af66c2f21340a7c081afbb7ace249357fbb5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_9099: 9099
Patchwork_138257v9: bb38af66c2f21340a7c081afbb7ace249357fbb5 @ git://anongit.freedesktop.org/gfx-ci/linux

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/index.html

#31 lore raw

✓ Xe.CI.BAT: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138256/
State : success

== Summary ==

CI Bug Log - changes from xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5_BAT -> xe-pw-138256v9_BAT
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Participating hosts (15 -> 15)
------------------------------

No changes in participating hosts

Known issues
------------

Here are the changes found in xe-pw-138256v9_BAT that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@xe_waitfence@reltime:
- bat-ptl-2: [PASS][1] -> [FAIL][2] ([Intel XE#9115])
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/bat-ptl-2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/bat-ptl-2/igt@[email protected]

[Intel XE#9115]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9115

Build changes
-------------

* Linux: xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5 -> xe-pw-138256v9

IGT_9099: 9099
xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5: bb38af66c2f21340a7c081afbb7ace249357fbb5
xe-pw-138256v9: 138256v9

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/index.html

#32 lore raw

✓ Xe.CI.FULL: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138256/
State : success

== Summary ==

CI Bug Log - changes from xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5_FULL -> xe-pw-138256v9_FULL
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Participating hosts (2 -> 2)
------------------------------

No changes in participating hosts

Known issues
------------

Here are the changes found in xe-pw-138256v9_FULL that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic:
- shard-lnl: [PASS][1] -> [DMESG-FAIL][2] ([Intel XE#1727]) +1 other test dmesg-fail
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-lnl-6/igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic.html
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-2/igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic.html

* igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic@pipe-a-edp-1-4:
- shard-lnl: [PASS][3] -> [DMESG-WARN][4] ([Intel XE#1727])
[3]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-lnl-6/igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic@pipe-a-edp-1-4.html
[4]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-2/igt@kms_async_flips@async-flip-with-page-flip-events-tiled-atomic@pipe-a-edp-1-4.html

* igt@kms_big_fb@4-tiled-16bpp-rotate-270:
- shard-bmg: NOTRUN -> [SKIP][5] ([Intel XE#2327])
[5]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@kms_big_fb@linear-max-hw-stride-64bpp-rotate-0-hflip:
- shard-lnl: NOTRUN -> [SKIP][6] ([Intel XE#7059] / [Intel XE#7085])
[6]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-0:
- shard-lnl: NOTRUN -> [SKIP][7] ([Intel XE#1124]) +2 other tests skip
[7]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-180-async-flip:
- shard-bmg: NOTRUN -> [SKIP][8] ([Intel XE#1124]) +2 other tests skip
[8]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html

* igt@kms_bw@connected-linear-tiling-2-displays-target-2560x1440p:
- shard-lnl: NOTRUN -> [SKIP][9] ([Intel XE#7679])
[9]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_bw@linear-tiling-4-displays-target-3840x2160p:
- shard-bmg: NOTRUN -> [SKIP][10] ([Intel XE#367]) +1 other test skip
[10]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_ccs@bad-rotation-90-4-tiled-mtl-mc-ccs:
- shard-bmg: NOTRUN -> [SKIP][11] ([Intel XE#2887]) +7 other tests skip
[11]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_ccs@bad-rotation-90-y-tiled-gen12-rc-ccs-cc:
- shard-lnl: NOTRUN -> [SKIP][12] ([Intel XE#2887]) +4 other tests skip
[12]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_ccs@crc-primary-suspend-y-tiled-gen12-rc-ccs-cc:
- shard-bmg: NOTRUN -> [SKIP][13] ([Intel XE#3432])
[13]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_cdclk@plane-scaling:
- shard-bmg: NOTRUN -> [SKIP][14] ([Intel XE#2724] / [Intel XE#7449])
[14]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_chamelium_color@ctm-blue-to-red:
- shard-lnl: NOTRUN -> [SKIP][15] ([Intel XE#306] / [Intel XE#7358])
[15]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_chamelium_color@ctm-red-to-blue:
- shard-bmg: NOTRUN -> [SKIP][16] ([Intel XE#2325] / [Intel XE#7358])
[16]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@kms_chamelium_color_pipeline@plane-lut1d:
- shard-bmg: NOTRUN -> [SKIP][17] ([Intel XE#7358]) +1 other test skip
[17]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_chamelium_hpd@common-hpd-after-suspend:
- shard-bmg: NOTRUN -> [SKIP][18] ([Intel XE#2252]) +2 other tests skip
[18]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd-after-suspend:
- shard-lnl: NOTRUN -> [SKIP][19] ([Intel XE#373]) +1 other test skip
[19]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_content_protection@atomic-hdcp14:
- shard-bmg: NOTRUN -> [FAIL][20] ([Intel XE#1178] / [Intel XE#3304] / [Intel XE#7374]) +1 other test fail
[20]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_content_protection@legacy-hdcp14:
- shard-lnl: NOTRUN -> [SKIP][21] ([Intel XE#7642]) +1 other test skip
[21]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-512x170:
- shard-lnl: NOTRUN -> [SKIP][22] ([Intel XE#2321] / [Intel XE#7355])
[22]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-512x512:
- shard-bmg: NOTRUN -> [SKIP][23] ([Intel XE#2321] / [Intel XE#7355])
[23]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@kms_cursor_legacy@cursora-vs-flipb-varying-size:
- shard-lnl: NOTRUN -> [SKIP][24] ([Intel XE#309] / [Intel XE#7343])
[24]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_dither@fb-8bpc-vs-panel-6bpc@pipe-a-hdmi-a-3:
- shard-bmg: NOTRUN -> [SKIP][25] ([Intel XE#1340] / [Intel XE#7435])
[25]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@kms_dither@[email protected]

* igt@kms_dp_link_training@non-uhbr-mst:
- shard-bmg: NOTRUN -> [SKIP][26] ([Intel XE#4354] / [Intel XE#5882])
[26]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@kms_dsc@dsc-fractional-bpp:
- shard-lnl: NOTRUN -> [SKIP][27] ([Intel XE#8265])
[27]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_dsc@dsc-with-output-formats-with-bpc:
- shard-bmg: NOTRUN -> [SKIP][28] ([Intel XE#8265])
[28]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_fbcon_fbt@psr:
- shard-bmg: NOTRUN -> [SKIP][29] ([Intel XE#8680])
[29]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_feature_discovery@psr2:
- shard-bmg: NOTRUN -> [SKIP][30] ([Intel XE#2374] / [Intel XE#6128])
[30]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@kms_flip@2x-flip-vs-dpms-on-nop:
- shard-lnl: NOTRUN -> [SKIP][31] ([Intel XE#1421]) +1 other test skip
[31]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank-interruptible@b-edp1:
- shard-lnl: [PASS][32] -> [FAIL][33] ([Intel XE#301]) +1 other test fail
[32]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-lnl-7/igt@kms_flip@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-1/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@a-edp1:
- shard-lnl: NOTRUN -> [FAIL][34] ([Intel XE#301]) +2 other tests fail
[34]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling:
- shard-bmg: NOTRUN -> [SKIP][35] ([Intel XE#7178] / [Intel XE#7351]) +1 other test skip
[35]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling:
- shard-lnl: NOTRUN -> [SKIP][36] ([Intel XE#1397] / [Intel XE#1745] / [Intel XE#7385] / [Intel XE#9144]) +1 other test skip
[36]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling@pipe-a-default-mode:
- shard-lnl: NOTRUN -> [SKIP][37] ([Intel XE#1397] / [Intel XE#7385] / [Intel XE#9144]) +1 other test skip
[37]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling@pipe-a-default-mode.html

* igt@kms_frontbuffer_tracking@drrs-1p-primscrn-pri-shrfb-draw-render:
- shard-lnl: NOTRUN -> [SKIP][38] ([Intel XE#6312] / [Intel XE#651]) +1 other test skip
[38]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_frontbuffer_tracking@drrs-1p-primscrn-pri-shrfb-draw-render.html

* igt@kms_frontbuffer_tracking@drrs-2p-primscrn-spr-indfb-draw-render:
- shard-bmg: NOTRUN -> [SKIP][39] ([Intel XE#2311]) +21 other tests skip
[39]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@kms_frontbuffer_tracking@drrs-2p-primscrn-spr-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@drrshdr-argb161616f-draw-blt:
- shard-bmg: NOTRUN -> [SKIP][40] ([Intel XE#7061]) +3 other tests skip
[40]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@kms_frontbuffer_tracking@drrshdr-rgb101010-draw-render:
- shard-lnl: NOTRUN -> [SKIP][41] ([Intel XE#6312]) +3 other tests skip
[41]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-pgflip-blt:
- shard-lnl: NOTRUN -> [SKIP][42] ([Intel XE#656] / [Intel XE#7905]) +12 other tests skip
[42]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-mmap-wc:
- shard-bmg: NOTRUN -> [SKIP][43] ([Intel XE#4141]) +5 other tests skip
[43]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbchdr-1p-offscreen-pri-shrfb-draw-blt:
- shard-lnl: NOTRUN -> [SKIP][44] ([Intel XE#7865]) +6 other tests skip
[44]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_frontbuffer_tracking@fbchdr-1p-offscreen-pri-shrfb-draw-blt.html

* igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-shrfb-msflip-blt:
- shard-lnl: NOTRUN -> [SKIP][45] ([Intel XE#7905]) +12 other tests skip
[45]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-shrfb-msflip-blt.html

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-plflip-blt:
- shard-bmg: NOTRUN -> [SKIP][46] ([Intel XE#2313]) +22 other tests skip
[46]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-plflip-blt.html

* igt@kms_frontbuffer_tracking@fbcpsr-abgr161616f-draw-blt:
- shard-bmg: NOTRUN -> [SKIP][47] ([Intel XE#7061] / [Intel XE#7356]) +2 other tests skip
[47]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@hdr-argb161616f-draw-blt:
- shard-lnl: NOTRUN -> [SKIP][48] ([Intel XE#7061])
[48]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@plane-fbc-rte:
- shard-bmg: NOTRUN -> [SKIP][49] ([Intel XE#2350] / [Intel XE#7503])
[49]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_hdr@static-toggle-dpms:
- shard-lnl: NOTRUN -> [SKIP][50] ([Intel XE#1503])
[50]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_joiner@invalid-modeset-big-joiner:
- shard-bmg: NOTRUN -> [SKIP][51] ([Intel XE#6901])
[51]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_plane@pixel-format-4-tiled-dg2-mc-ccs-modifier-source-clamping:
- shard-lnl: NOTRUN -> [SKIP][52] ([Intel XE#7283]) +1 other test skip
[52]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_plane@pixel-format-4-tiled-dg2-mc-ccs-modifier-source-clamping.html

* igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-75@pipe-a:
- shard-lnl: NOTRUN -> [SKIP][53] ([Intel XE#2763] / [Intel XE#6886]) +3 other tests skip
[53]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@kms_plane_scaling@[email protected]

* igt@kms_pm_lpsp@kms-lpsp:
- shard-bmg: NOTRUN -> [SKIP][54] ([Intel XE#2499])
[54]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_psr2_sf@pr-cursor-plane-update-sf:
- shard-lnl: NOTRUN -> [SKIP][55] ([Intel XE#2893] / [Intel XE#7304])
[55]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_psr2_sf@psr2-cursor-plane-move-continuous-exceed-sf:
- shard-bmg: NOTRUN -> [SKIP][56] ([Intel XE#1489]) +1 other test skip
[56]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_psr@fbc-pr-primary-render:
- shard-lnl: NOTRUN -> [SKIP][57] ([Intel XE#1406])
[57]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_psr@psr2-sprite-blt:
- shard-bmg: NOTRUN -> [SKIP][58] ([Intel XE#2234] / [Intel XE#2850]) +6 other tests skip
[58]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_rotation_crc@bad-pixel-format:
- shard-lnl: NOTRUN -> [SKIP][59] ([Intel XE#3414] / [Intel XE#3904] / [Intel XE#7342])
[59]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_rotation_crc@primary-rotation-270:
- shard-bmg: NOTRUN -> [SKIP][60] ([Intel XE#3904] / [Intel XE#7342]) +1 other test skip
[60]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_scaling_modes@scaling-mode-full-aspect:
- shard-bmg: NOTRUN -> [SKIP][61] ([Intel XE#2413])
[61]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_sharpness_filter@filter-strength:
- shard-bmg: NOTRUN -> [SKIP][62] ([Intel XE#6503])
[62]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@kms_vrr@seamless-rr-switch-drrs:
- shard-lnl: NOTRUN -> [SKIP][63] ([Intel XE#1499] / [Intel XE#9271])
[63]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_vrr@seamless-rr-switch-vrr:
- shard-bmg: NOTRUN -> [SKIP][64] ([Intel XE#1499] / [Intel XE#9271])
[64]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@xe_compute_preempt@compute-preempt-many-vram:
- shard-lnl: NOTRUN -> [SKIP][65] ([Intel XE#5191] / [Intel XE#7316] / [Intel XE#7346])
[65]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_evict@evict-large-external:
- shard-lnl: NOTRUN -> [SKIP][66] ([Intel XE#6540] / [Intel XE#688]) +1 other test skip
[66]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_exec_balancer@no-exec-cm-parallel-userptr-rebind:
- shard-lnl: NOTRUN -> [SKIP][67] ([Intel XE#7482]) +4 other tests skip
[67]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_exec_basic@multigpu-many-execqueues-many-vm-basic-defer-mmap:
- shard-lnl: NOTRUN -> [SKIP][68] ([Intel XE#1392]) +1 other test skip
[68]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@xe_exec_basic@multigpu-many-execqueues-many-vm-basic-defer-mmap.html

* igt@xe_exec_basic@multigpu-no-exec-null:
- shard-bmg: NOTRUN -> [SKIP][69] ([Intel XE#2322] / [Intel XE#7372]) +1 other test skip
[69]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@xe_exec_fault_mode@many-execqueues-multi-queue-userptr-imm:
- shard-lnl: NOTRUN -> [SKIP][70] ([Intel XE#8374]) +2 other tests skip
[70]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_exec_fault_mode@many-multi-queue-userptr-invalidate-race-prefetch:
- shard-bmg: NOTRUN -> [SKIP][71] ([Intel XE#8374]) +5 other tests skip
[71]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@xe_exec_fault_mode@many-multi-queue-userptr-invalidate-race-prefetch.html

* igt@xe_exec_multi_queue@many-queues-preempt-mode-fault-basic:
- shard-bmg: NOTRUN -> [SKIP][72] ([Intel XE#8364]) +14 other tests skip
[72]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@xe_exec_multi_queue@one-queue-dyn-priority-smem:
- shard-lnl: NOTRUN -> [SKIP][73] ([Intel XE#8364]) +6 other tests skip
[73]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_exec_reset@cm-multi-queue-cat-error:
- shard-bmg: NOTRUN -> [SKIP][74] ([Intel XE#8369]) +1 other test skip
[74]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@xe_exec_threads@threads-multi-queue-mixed-userptr-rebind:
- shard-bmg: NOTRUN -> [SKIP][75] ([Intel XE#8378]) +3 other tests skip
[75]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@xe_exec_threads@threads-multi-queue-shared-vm-userptr-invalidate-race:
- shard-lnl: NOTRUN -> [SKIP][76] ([Intel XE#8378]) +1 other test skip
[76]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@xe_exec_threads@threads-multi-queue-shared-vm-userptr-invalidate-race.html

* igt@xe_live_ktest@xe_bo@xe_ccs_migrate_kunit:
- shard-bmg: NOTRUN -> [SKIP][77] ([Intel XE#2229])
[77]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@xe_live_ktest@xe_bo@xe_ccs_migrate_kunit.html

* igt@xe_mmap@small-bar:
- shard-bmg: NOTRUN -> [SKIP][78] ([Intel XE#586] / [Intel XE#7323] / [Intel XE#7384])
[78]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@xe_page_reclaim@binds-large-split:
- shard-lnl: NOTRUN -> [SKIP][79] ([Intel XE#7793])
[79]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_page_reclaim@boundary-split:
- shard-bmg: NOTRUN -> [SKIP][80] ([Intel XE#7793])
[80]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@xe_pat@xa-app-transient-media-on:
- shard-lnl: NOTRUN -> [SKIP][81] ([Intel XE#7590] / [Intel XE#7772])
[81]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_pm@d3cold-basic-exec:
- shard-lnl: NOTRUN -> [SKIP][82] ([Intel XE#2284] / [Intel XE#366] / [Intel XE#7370])
[82]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_pm@s3-vm-bind-unbind-all:
- shard-lnl: NOTRUN -> [SKIP][83] ([Intel XE#584] / [Intel XE#7369]) +1 other test skip
[83]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_pmu@all-fn-engine-activity-load:
- shard-bmg: [PASS][84] -> [FAIL][85] ([Intel XE#7992])
[84]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-7/igt@[email protected]
[85]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@xe_prefetch_fault@prefetch-fault-svm:
- shard-bmg: NOTRUN -> [SKIP][86] ([Intel XE#7599])
[86]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@xe_pxp@pxp-stale-bo-bind-post-termination-irq:
- shard-bmg: NOTRUN -> [SKIP][87] ([Intel XE#4733] / [Intel XE#7417]) +1 other test skip
[87]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@xe_query@multigpu-query-oa-units:
- shard-bmg: NOTRUN -> [SKIP][88] ([Intel XE#944])
[88]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@[email protected]

* igt@xe_query@multigpu-query-pxp-status:
- shard-lnl: NOTRUN -> [SKIP][89] ([Intel XE#944])
[89]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_sriov_flr@flr-twice:
- shard-lnl: NOTRUN -> [SKIP][90] ([Intel XE#4273])
[90]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@xe_survivability@i2c-functionality:
- shard-bmg: [PASS][91] -> [ABORT][92] ([Intel XE#8007]) +1 other test abort
[91]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-4/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-7/igt@[email protected]

* igt@xe_vm@overcommit-nonfault-vram-lr-external-nodefer:
- shard-lnl: NOTRUN -> [SKIP][93] ([Intel XE#7892])
[93]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

#### Possible fixes ####

* igt@kms_flip@dpms-vs-vblank-race-interruptible@d-dp2:
- shard-bmg: [FAIL][94] ([Intel XE#3098]) -> [PASS][95] +1 other test pass
[94]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-5/igt@kms_flip@[email protected]
[95]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-9/igt@kms_flip@[email protected]

* igt@xe_exec_threads@threads-hang-fd-userptr-invalidate-race:
- shard-bmg: [FAIL][96] ([Intel XE#9096]) -> [PASS][97]
[96]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-3/igt@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@xe_fault_injection@probe-fail-guc-xe_guc_mmio_send_recv:
- shard-bmg: [ABORT][98] ([Intel XE#8007]) -> [PASS][99]
[98]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-7/igt@xe_fault_injection@probe-fail-guc-xe_guc_mmio_send_recv.html
[99]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-3/igt@xe_fault_injection@probe-fail-guc-xe_guc_mmio_send_recv.html

* igt@xe_pm@s3-multiple-execs:
- shard-bmg: [INCOMPLETE][100] ([Intel XE#8175]) -> [PASS][101]
[100]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-6/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-8/igt@[email protected]

* igt@xe_vm@mmap-style-bind-userptr-either-side-full:
- shard-bmg: [ABORT][102] ([Intel XE#9281]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-1/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

#### Warnings ####

* igt@kms_cursor_legacy@cursorb-vs-flipb-atomic-transitions:
- shard-lnl: [SKIP][104] ([Intel XE#309] / [Intel XE#7343] / [Intel XE#7935]) -> [SKIP][105] ([Intel XE#309] / [Intel XE#7343])
[104]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-lnl-8/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-6/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern:
- shard-bmg: [FAIL][106] ([Intel XE#1729] / [Intel XE#7424]) -> [SKIP][107] ([Intel XE#2426] / [Intel XE#5848])
[106]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-1/igt@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-2/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern-with-chamelium:
- shard-bmg: [SKIP][108] ([Intel XE#2426] / [Intel XE#5848]) -> [SKIP][109] ([Intel XE#2509] / [Intel XE#7437])
[108]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-bmg-9/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-bmg-10/igt@[email protected]

* igt@xe_exec_reset@gt-reset-fault-injection:
- shard-lnl: [DMESG-WARN][110] ([Intel XE#9130]) -> [ABORT][111] ([Intel XE#9145])
[110]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5/shard-lnl-4/igt@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/shard-lnl-7/igt@[email protected]

[Intel XE#1124]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1124
[Intel XE#1178]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1178
[Intel XE#1340]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1340
[Intel XE#1392]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1392
[Intel XE#1397]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1397
[Intel XE#1406]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1406
[Intel XE#1421]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1421
[Intel XE#1489]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1489
[Intel XE#1499]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1499
[Intel XE#1503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1503
[Intel XE#1727]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1727
[Intel XE#1729]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1729
[Intel XE#1745]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1745
[Intel XE#2229]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2229
[Intel XE#2234]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2234
[Intel XE#2252]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2252
[Intel XE#2284]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2284
[Intel XE#2311]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2311
[Intel XE#2313]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2313
[Intel XE#2321]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2321
[Intel XE#2322]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2322
[Intel XE#2325]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2325
[Intel XE#2327]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2327
[Intel XE#2350]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2350
[Intel XE#2374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2374
[Intel XE#2413]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2413
[Intel XE#2426]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2426
[Intel XE#2499]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2499
[Intel XE#2509]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2509
[Intel XE#2724]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2724
[Intel XE#2763]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2763
[Intel XE#2850]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2850
[Intel XE#2887]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2887
[Intel XE#2893]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2893
[Intel XE#301]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/301
[Intel XE#306]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/306
[Intel XE#309]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/309
[Intel XE#3098]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3098
[Intel XE#3304]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3304
[Intel XE#3414]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3414
[Intel XE#3432]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3432
[Intel XE#366]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/366
[Intel XE#367]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/367
[Intel XE#373]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/373
[Intel XE#3904]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/3904
[Intel XE#4141]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4141
[Intel XE#4273]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4273
[Intel XE#4354]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4354
[Intel XE#4733]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/4733
[Intel XE#5191]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5191
[Intel XE#584]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/584
[Intel XE#5848]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5848
[Intel XE#586]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/586
[Intel XE#5882]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/5882
[Intel XE#6128]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6128
[Intel XE#6312]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6312
[Intel XE#6503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6503
[Intel XE#651]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/651
[Intel XE#6540]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6540
[Intel XE#656]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/656
[Intel XE#688]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/688
[Intel XE#6886]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6886
[Intel XE#6901]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/6901
[Intel XE#7059]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7059
[Intel XE#7061]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7061
[Intel XE#7085]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7085
[Intel XE#7178]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7178
[Intel XE#7283]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7283
[Intel XE#7304]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7304
[Intel XE#7316]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7316
[Intel XE#7323]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7323
[Intel XE#7342]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7342
[Intel XE#7343]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7343
[Intel XE#7346]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7346
[Intel XE#7351]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7351
[Intel XE#7355]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7355
[Intel XE#7356]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7356
[Intel XE#7358]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7358
[Intel XE#7369]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7369
[Intel XE#7370]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7370
[Intel XE#7372]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7372
[Intel XE#7374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7374
[Intel XE#7384]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7384
[Intel XE#7385]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7385
[Intel XE#7417]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7417
[Intel XE#7424]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7424
[Intel XE#7435]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7435
[Intel XE#7437]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7437
[Intel XE#7449]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7449
[Intel XE#7482]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7482
[Intel XE#7503]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7503
[Intel XE#7590]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7590
[Intel XE#7599]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7599
[Intel XE#7642]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7642
[Intel XE#7679]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7679
[Intel XE#7772]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7772
[Intel XE#7793]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7793
[Intel XE#7865]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7865
[Intel XE#7892]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7892
[Intel XE#7905]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7905
[Intel XE#7935]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7935
[Intel XE#7992]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/7992
[Intel XE#8007]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8007
[Intel XE#8175]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8175
[Intel XE#8265]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8265
[Intel XE#8364]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8364
[Intel XE#8369]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8369
[Intel XE#8374]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8374
[Intel XE#8378]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8378
[Intel XE#8680]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/8680
[Intel XE#9096]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9096
[Intel XE#9130]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9130
[Intel XE#9144]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9144
[Intel XE#9145]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9145
[Intel XE#9271]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9271
[Intel XE#9281]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/9281
[Intel XE#944]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/944

Build changes
-------------

* Linux: xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5 -> xe-pw-138256v9

IGT_9099: 9099
xe-5759-bb38af66c2f21340a7c081afbb7ace249357fbb5: bb38af66c2f21340a7c081afbb7ace249357fbb5
xe-pw-138256v9: 138256v9

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-138256v9/index.html

#33 lore raw

✓ i915.CI.Full: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138257/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_19156_full -> Patchwork_138257v9_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Participating hosts (11 -> 10)
------------------------------

Missing (1): pig-kbl-iris

New tests
---------

New tests have been introduced between CI_DRM_19156_full and Patchwork_138257v9_full:

### New IGT tests (1) ###

* igt@kms_properties@connector-properties-legacy@pipe-a-vga-1:
- Statuses : 1 pass(s)
- Exec time: [0.23] s

Known issues
------------

Here are the changes found in Patchwork_138257v9_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@api_intel_bb@blit-reloc-keep-cache:
- shard-rkl: NOTRUN -> [SKIP][1] ([i915#8411])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@api_intel_bb@crc32:
- shard-rkl: NOTRUN -> [SKIP][2] ([i915#6230])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@api_intel_bb@object-reloc-purge-cache:
- shard-dg1: NOTRUN -> [SKIP][3] ([i915#8411])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@device_reset@cold-reset-bound:
- shard-dg1: NOTRUN -> [SKIP][4] ([i915#11078])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_ccs@ctrl-surf-copy:
- shard-tglu: NOTRUN -> [SKIP][5] ([i915#3555] / [i915#9323])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@gem_ccs@large-ctrl-surf-copy:
- shard-dg1: NOTRUN -> [SKIP][6] ([i915#13008])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_ccs@suspend-resume:
- shard-dg2: [PASS][7] -> [INCOMPLETE][8] ([i915#13356] / [i915#16348]) +1 other test incomplete
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg2-1/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-1/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][9] ([i915#9323])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][10] ([i915#9323])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@gem_create@create-ext-cpu-access-big:
- shard-tglu-1: NOTRUN -> [SKIP][11] ([i915#6335])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@gem_ctx_persistence@engines-persistence:
- shard-snb: NOTRUN -> [SKIP][12] ([i915#1099]) +4 other tests skip
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-snb1/igt@[email protected]

* igt@gem_ctx_persistence@heartbeat-many:
- shard-dg1: NOTRUN -> [SKIP][13] ([i915#8555]) +1 other test skip
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_ctx_persistence@saturated-hostile-nopreempt@vcs1:
- shard-mtlp: NOTRUN -> [SKIP][14] ([i915#5882]) +6 other tests skip
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@gem_ctx_persistence@[email protected]

* igt@gem_ctx_sseu@engines:
- shard-rkl: NOTRUN -> [SKIP][15] ([i915#280])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@gem_eio@unwedge-stress@blt:
- shard-mtlp: NOTRUN -> [SKIP][16] ([i915#15314]) +1 other test skip
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@gem_eio@[email protected]

* igt@gem_exec_balancer@invalid-bonds:
- shard-dg1: NOTRUN -> [SKIP][17] ([i915#4036])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_exec_balancer@noheartbeat:
- shard-dg2: NOTRUN -> [SKIP][18] ([i915#8555])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@gem_exec_balancer@parallel-balancer:
- shard-rkl: NOTRUN -> [SKIP][19] ([i915#4525])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@gem_exec_capture@capture-invisible@lmem0:
- shard-dg2: NOTRUN -> [SKIP][20] ([i915#6334]) +2 other tests skip
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@gem_exec_capture@[email protected]

* igt@gem_exec_fence@submit:
- shard-dg1: NOTRUN -> [SKIP][21] ([i915#4812])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_exec_flush@basic-batch-kernel-default-wb:
- shard-dg1: NOTRUN -> [SKIP][22] ([i915#3539] / [i915#4852])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_exec_reloc@basic-cpu-active:
- shard-mtlp: NOTRUN -> [SKIP][23] ([i915#3281]) +1 other test skip
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@gem_exec_reloc@basic-range-active:
- shard-dg2: NOTRUN -> [SKIP][24] ([i915#3281]) +1 other test skip
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@gem_exec_reloc@basic-wc-cpu-noreloc:
- shard-dg1: NOTRUN -> [SKIP][25] ([i915#3281]) +6 other tests skip
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_exec_reloc@basic-write-read:
- shard-rkl: NOTRUN -> [SKIP][26] ([i915#3281]) +6 other tests skip
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@gem_fenced_exec_thrash@too-many-fences:
- shard-dg1: NOTRUN -> [SKIP][27] ([i915#4860])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-rkl: NOTRUN -> [SKIP][28] ([i915#2190])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@gem_lmem_swapping@massive-random:
- shard-glk: NOTRUN -> [SKIP][29] ([i915#4613]) +1 other test skip
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk2/igt@[email protected]

* igt@gem_lmem_swapping@parallel-multi:
- shard-tglu-1: NOTRUN -> [SKIP][30] ([i915#4613]) +2 other tests skip
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@gem_lmem_swapping@parallel-random-verify-ccs:
- shard-rkl: NOTRUN -> [SKIP][31] ([i915#4613]) +2 other tests skip
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@[email protected]

* igt@gem_lmem_swapping@verify-random-ccs:
- shard-dg1: NOTRUN -> [SKIP][32] ([i915#12193])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_lmem_swapping@verify-random-ccs@lmem0:
- shard-dg1: NOTRUN -> [SKIP][33] ([i915#4565])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@gem_lmem_swapping@[email protected]

* igt@gem_media_vme:
- shard-tglu: NOTRUN -> [SKIP][34] ([i915#284])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@gem_media_vme.html

* igt@gem_mmap_gtt@cpuset-basic-small-copy-odd:
- shard-mtlp: NOTRUN -> [SKIP][35] ([i915#4077]) +1 other test skip
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@gem_mmap_gtt@fault-concurrent-y:
- shard-dg1: NOTRUN -> [SKIP][36] ([i915#4077]) +5 other tests skip
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gem_mmap_wc@bad-offset:
- shard-dg2: NOTRUN -> [SKIP][37] ([i915#4083]) +1 other test skip
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@gem_mmap_wc@write-wc-read-gtt:
- shard-dg1: NOTRUN -> [SKIP][38] ([i915#4083])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-tglu: NOTRUN -> [WARN][39] ([i915#2658])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@gem_pread@self:
- shard-rkl: NOTRUN -> [SKIP][40] ([i915#3282])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@gem_pwrite@basic-exhaustion:
- shard-glk: NOTRUN -> [WARN][41] ([i915#14702] / [i915#2658])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk6/igt@[email protected]

* igt@gem_pxp@reject-modify-context-protection-off-3:
- shard-dg1: NOTRUN -> [SKIP][42] ([i915#4270]) +2 other tests skip
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@gem_pxp@verify-pxp-stale-ctx-execution:
- shard-glk11: NOTRUN -> [SKIP][43] +76 other tests skip
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@[email protected]

* igt@gem_render_copy@yf-tiled-mc-ccs-to-vebox-yf-tiled:
- shard-mtlp: NOTRUN -> [SKIP][44] ([i915#8428])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@gem_softpin@evict-snoop:
- shard-dg2: NOTRUN -> [SKIP][45] ([i915#4885])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@gem_tiled_pread_basic@basic:
- shard-mtlp: NOTRUN -> [SKIP][46] ([i915#15657])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@gem_userptr_blits@access-control:
- shard-dg2: NOTRUN -> [SKIP][47] ([i915#3297])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@gem_userptr_blits@readonly-pwrite-unsync:
- shard-tglu-1: NOTRUN -> [SKIP][48] ([i915#3297]) +1 other test skip
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@gem_userptr_blits@unsync-overlap:
- shard-rkl: NOTRUN -> [SKIP][49] ([i915#3297])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@gem_workarounds@suspend-resume:
- shard-glk: NOTRUN -> [INCOMPLETE][50] ([i915#13356] / [i915#14586])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk1/igt@[email protected]

* igt@gen9_exec_parse@allowed-all:
- shard-rkl: NOTRUN -> [SKIP][51] ([i915#2527]) +1 other test skip
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@gen9_exec_parse@basic-rejected-ctx-param:
- shard-snb: NOTRUN -> [SKIP][52] +414 other tests skip
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-snb7/igt@[email protected]

* igt@gen9_exec_parse@batch-without-end:
- shard-tglu: NOTRUN -> [SKIP][53] ([i915#2527] / [i915#2856]) +1 other test skip
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@gen9_exec_parse@bb-start-out:
- shard-dg1: NOTRUN -> [SKIP][54] ([i915#2527])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@gen9_exec_parse@shadow-peek:
- shard-tglu-1: NOTRUN -> [SKIP][55] ([i915#2527] / [i915#2856]) +1 other test skip
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@gpu_buddy@gpu_buddy:
- shard-dg1: NOTRUN -> [SKIP][56] ([i915#15678])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@gpu_buddy@gpu_buddy.html

* igt@i915_drm_fdinfo@all-busy-check-all:
- shard-dg1: NOTRUN -> [SKIP][57] ([i915#14123])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@i915_drm_fdinfo@virtual-busy:
- shard-mtlp: NOTRUN -> [SKIP][58] ([i915#14118])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle:
- shard-rkl: NOTRUN -> [SKIP][59] ([i915#14498])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@i915_power@sanity:
- shard-mtlp: [PASS][60] -> [SKIP][61] ([i915#7984])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-4/igt@[email protected]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-8/igt@[email protected]

* igt@i915_query@query-topology-known-pci-ids:
- shard-tglu: NOTRUN -> [SKIP][62] ([i915#16109])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@i915_suspend@basic-s3-without-i915:
- shard-tglu-1: NOTRUN -> [INCOMPLETE][63] ([i915#4817] / [i915#7443])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@i915_suspend@forcewake:
- shard-rkl: NOTRUN -> [INCOMPLETE][64] ([i915#4817])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_async_flips@alternate-sync-async-flip-atomic:
- shard-dg2: [PASS][65] -> [FAIL][66] ([i915#14888]) +1 other test fail
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg2-3/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-6/igt@[email protected]
- shard-dg1: [PASS][67] -> [FAIL][68] ([i915#14888]) +1 other test fail
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-15/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_async_flips@alternate-sync-async-flip-atomic@pipe-c-hdmi-a-2:
- shard-glk: [PASS][69] -> [FAIL][70] ([i915#14888])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk3/igt@kms_async_flips@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk1/igt@kms_async_flips@[email protected]

* igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels:
- shard-tglu: NOTRUN -> [SKIP][71] ([i915#1769] / [i915#3555])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels.html

* igt@kms_big_fb@4-tiled-16bpp-rotate-180:
- shard-tglu-1: NOTRUN -> [SKIP][72] ([i915#5286])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_big_fb@4-tiled-32bpp-rotate-270:
- shard-dg2: NOTRUN -> [SKIP][73]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_big_fb@4-tiled-64bpp-rotate-0:
- shard-rkl: NOTRUN -> [SKIP][74] ([i915#5286]) +2 other tests skip
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-0:
- shard-dg1: NOTRUN -> [SKIP][75] ([i915#4538] / [i915#5286]) +1 other test skip
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-tglu: NOTRUN -> [SKIP][76] ([i915#5286]) +3 other tests skip
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-180-hflip:
- shard-mtlp: [PASS][77] -> [FAIL][78] ([i915#15733] / [i915#5138])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-1/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-1/igt@[email protected]

* igt@kms_big_fb@linear-16bpp-rotate-90:
- shard-dg1: NOTRUN -> [SKIP][79] ([i915#3638]) +1 other test skip
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_big_fb@linear-64bpp-rotate-270:
- shard-mtlp: NOTRUN -> [SKIP][80] +4 other tests skip
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_big_fb@linear-max-hw-stride-64bpp-rotate-0-hflip:
- shard-rkl: NOTRUN -> [SKIP][81] ([i915#3828])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@[email protected]

* igt@kms_big_fb@y-tiled-64bpp-rotate-90:
- shard-rkl: NOTRUN -> [SKIP][82] ([i915#3638]) +2 other tests skip
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-270:
- shard-dg2: NOTRUN -> [SKIP][83] ([i915#4538] / [i915#5190])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-90:
- shard-dg1: NOTRUN -> [SKIP][84] ([i915#4538]) +1 other test skip
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-180-async-flip:
- shard-rkl: NOTRUN -> [SKIP][85] +44 other tests skip
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html

* igt@kms_ccs@bad-aux-stride-4-tiled-mtl-mc-ccs@pipe-a-hdmi-a-2:
- shard-rkl: NOTRUN -> [SKIP][86] ([i915#14544] / [i915#6095]) +7 other tests skip
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_ccs@[email protected]

* igt@kms_ccs@bad-aux-stride-4-tiled-mtl-mc-ccs@pipe-a-hdmi-a-4:
- shard-dg1: NOTRUN -> [SKIP][87] ([i915#6095]) +170 other tests skip
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-17/igt@kms_ccs@[email protected]

* igt@kms_ccs@bad-aux-stride-4-tiled-mtl-rc-ccs@pipe-b-hdmi-a-1:
- shard-tglu-1: NOTRUN -> [SKIP][88] ([i915#6095]) +24 other tests skip
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_ccs@[email protected]

* igt@kms_ccs@bad-rotation-90-y-tiled-gen12-mc-ccs@pipe-c-hdmi-a-2:
- shard-rkl: NOTRUN -> [SKIP][89] ([i915#14098] / [i915#6095]) +34 other tests skip
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-basic-4-tiled-lnl-ccs:
- shard-mtlp: NOTRUN -> [SKIP][90] ([i915#12313])
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_ccs@crc-primary-rotation-180-4-tiled-bmg-ccs:
- shard-tglu-1: NOTRUN -> [SKIP][91] ([i915#12313])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_ccs@crc-primary-rotation-180-4-tiled-lnl-ccs:
- shard-rkl: NOTRUN -> [SKIP][92] ([i915#12313])
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_ccs@crc-primary-rotation-180-4-tiled-mtl-rc-ccs-cc@pipe-c-hdmi-a-1:
- shard-glk10: NOTRUN -> [SKIP][93] +114 other tests skip
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk10/igt@kms_ccs@crc-primary-rotation-180-4-tiled-mtl-rc-ccs-cc@pipe-c-hdmi-a-1.html

* igt@kms_ccs@crc-primary-suspend-4-tiled-dg2-rc-ccs@pipe-b-hdmi-a-1:
- shard-rkl: NOTRUN -> [SKIP][94] ([i915#6095]) +55 other tests skip
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-suspend-4-tiled-lnl-ccs:
- shard-dg1: NOTRUN -> [SKIP][95] ([i915#12805])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_ccs@crc-primary-suspend-y-tiled-gen12-mc-ccs@pipe-d-hdmi-a-1:
- shard-tglu: NOTRUN -> [SKIP][96] ([i915#6095]) +49 other tests skip
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-suspend-yf-tiled-ccs@pipe-a-hdmi-a-1:
- shard-glk11: NOTRUN -> [INCOMPLETE][97] ([i915#15582]) +1 other test incomplete
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-suspend-yf-tiled-ccs@pipe-c-hdmi-a-2:
- shard-rkl: NOTRUN -> [SKIP][98] ([i915#14098] / [i915#14544] / [i915#6095]) +4 other tests skip
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-mc-ccs@pipe-a-hdmi-a-3:
- shard-dg2: NOTRUN -> [SKIP][99] ([i915#10307] / [i915#6095]) +51 other tests skip
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-7/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-rc-ccs-cc@pipe-d-hdmi-a-1:
- shard-dg2: NOTRUN -> [SKIP][100] ([i915#10307] / [i915#10434] / [i915#6095])
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-4/igt@kms_ccs@crc-sprite-planes-basic-4-tiled-mtl-rc-ccs-cc@pipe-d-hdmi-a-1.html

* igt@kms_ccs@random-ccs-data-4-tiled-dg2-rc-ccs@pipe-a-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][101] ([i915#6095]) +19 other tests skip
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_ccs@[email protected]

* igt@kms_ccs@random-ccs-data-4-tiled-lnl-ccs:
- shard-dg1: NOTRUN -> [SKIP][102] ([i915#12313])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][103] ([i915#12313]) +2 other tests skip
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_cdclk@plane-scaling@pipe-c-hdmi-a-3:
- shard-dg2: NOTRUN -> [SKIP][104] ([i915#17016]) +3 other tests skip
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-7/igt@kms_cdclk@[email protected]

* igt@kms_chamelium_audio@dp-audio-after-suspend:
- shard-tglu-1: NOTRUN -> [SKIP][105] ([i915#11151])
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_chamelium_color_pipeline@plane-lut1d-ctm3x4-lut1d:
- shard-tglu: NOTRUN -> [SKIP][106] ([i915#16471])
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][107] ([i915#16464] / [i915#16471])
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_chamelium_color_pipeline@plane-lut1d-lut1d:
- shard-rkl: NOTRUN -> [SKIP][108] ([i915#16471])
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_chamelium_color_pipeline@plane-lut3d-green-only:
- shard-tglu-1: NOTRUN -> [SKIP][109] ([i915#16471])
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_chamelium_frames@dp-crc-single:
- shard-tglu-1: NOTRUN -> [SKIP][110] ([i915#11151] / [i915#7828]) +3 other tests skip
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_chamelium_frames@dp-frame-dump:
- shard-rkl: NOTRUN -> [SKIP][111] ([i915#11151] / [i915#14544] / [i915#7828])
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]
- shard-dg1: NOTRUN -> [SKIP][112] ([i915#11151] / [i915#7828]) +2 other tests skip
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_chamelium_frames@hdmi-crc-fast:
- shard-rkl: NOTRUN -> [SKIP][113] ([i915#11151] / [i915#7828]) +3 other tests skip
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd-enable-disable-mode:
- shard-tglu: NOTRUN -> [SKIP][114] ([i915#11151] / [i915#7828]) +4 other tests skip
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd-with-enabled-mode:
- shard-mtlp: NOTRUN -> [SKIP][115] ([i915#11151] / [i915#7828])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_chamelium_hpd@hdmi-hpd-fast:
- shard-dg2: NOTRUN -> [SKIP][116] ([i915#11151] / [i915#7828]) +1 other test skip
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_color_pipeline@plane-ctm3x4@pipe-a-plane-4:
- shard-rkl: NOTRUN -> [SKIP][117] ([i915#16990]) +5 other tests skip
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@kms_color_pipeline@[email protected]

* igt@kms_color_pipeline@plane-lut1d-lut1d@pipe-b-plane-3:
- shard-tglu: NOTRUN -> [SKIP][118] ([i915#16990]) +15 other tests skip
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_color_pipeline@[email protected]

* igt@kms_color_pipeline@plane-lut1d-pre-ctm3x4@pipe-d-plane-4:
- shard-dg1: NOTRUN -> [SKIP][119] ([i915#16990]) +15 other tests skip
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_color_pipeline@[email protected]

* igt@kms_content_protection@atomic:
- shard-dg1: NOTRUN -> [SKIP][120] ([i915#15865])
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_content_protection@content-type-change:
- shard-rkl: NOTRUN -> [SKIP][121] ([i915#15865]) +2 other tests skip
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-tglu: NOTRUN -> [SKIP][122] ([i915#15330] / [i915#3116] / [i915#3299])
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][123] ([i915#15330] / [i915#3299])
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0-hdcp14:
- shard-rkl: NOTRUN -> [SKIP][124] ([i915#15330])
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-1:
- shard-tglu-1: NOTRUN -> [SKIP][125] ([i915#15330] / [i915#3116] / [i915#3299])
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_content_protection@lic-type-0:
- shard-tglu: NOTRUN -> [SKIP][126] ([i915#15865]) +2 other tests skip
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_content_protection@mei-interface:
- shard-mtlp: NOTRUN -> [SKIP][127] ([i915#8063] / [i915#9433])
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-256x85@pipe-a-hdmi-a-1:
- shard-rkl: NOTRUN -> [FAIL][128] ([i915#13566]) +1 other test fail
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@kms_cursor_crc@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-32x32:
- shard-tglu-1: NOTRUN -> [SKIP][129] ([i915#3555]) +2 other tests skip
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-512x170:
- shard-tglu: NOTRUN -> [SKIP][130] ([i915#13049])
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-512x170:
- shard-dg2: NOTRUN -> [SKIP][131] ([i915#13049])
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-512x512:
- shard-dg1: NOTRUN -> [SKIP][132] ([i915#13049])
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-64x21:
- shard-rkl: [PASS][133] -> [FAIL][134] ([i915#13566])
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-8/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_cursor_crc@cursor-rapid-movement-32x32:
- shard-rkl: NOTRUN -> [SKIP][135] ([i915#3555]) +2 other tests skip
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_cursor_crc@cursor-sliding-128x42@pipe-a-hdmi-a-1:
- shard-tglu: NOTRUN -> [FAIL][136] ([i915#13566]) +1 other test fail
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_cursor_crc@[email protected]

* igt@kms_cursor_crc@cursor-sliding-32x32:
- shard-tglu: NOTRUN -> [SKIP][137] ([i915#3555]) +4 other tests skip
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_cursor_crc@cursor-suspend:
- shard-glk: NOTRUN -> [INCOMPLETE][138] ([i915#12358] / [i915#14152] / [i915#7882])
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk2/igt@[email protected]

* igt@kms_cursor_crc@cursor-suspend@pipe-a-hdmi-a-1:
- shard-glk: NOTRUN -> [INCOMPLETE][139] ([i915#12358] / [i915#14152])
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk2/igt@kms_cursor_crc@[email protected]

* igt@kms_cursor_legacy@2x-flip-vs-cursor-atomic:
- shard-dg2: NOTRUN -> [SKIP][140] ([i915#13046] / [i915#5354])
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_cursor_legacy@short-busy-flip-before-cursor-atomic-transitions:
- shard-tglu-1: NOTRUN -> [SKIP][141] ([i915#4103])
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_cursor_legacy@short-busy-flip-before-cursor-atomic-transitions.html

* igt@kms_dirtyfb@psr-dirtyfb-ioctl:
- shard-tglu: NOTRUN -> [SKIP][142] ([i915#9723])
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_draw_crc@draw-method-mmap-gtt:
- shard-dg1: NOTRUN -> [SKIP][143] ([i915#8812])
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_dsc@dsc-with-bpc-bigjoiner:
- shard-tglu: NOTRUN -> [SKIP][144] ([i915#16361]) +2 other tests skip
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_dsc@dsc-with-formats-bigjoiner:
- shard-mtlp: NOTRUN -> [SKIP][145] ([i915#16361])
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_dsc@dsc-with-output-formats-with-bpc-bigjoiner:
- shard-rkl: NOTRUN -> [SKIP][146] ([i915#16361])
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_dsc@dsc-with-output-formats-with-bpc-ultrajoiner:
- shard-dg1: NOTRUN -> [SKIP][147] ([i915#16361])
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-glk10: NOTRUN -> [INCOMPLETE][148] ([i915#9878])
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk10/igt@[email protected]

* igt@kms_fbcon_fbt@psr:
- shard-tglu-1: NOTRUN -> [SKIP][149] ([i915#16680])
[149]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_feature_discovery@dsc:
- shard-rkl: NOTRUN -> [SKIP][150] ([i915#16600])
[150]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_feature_discovery@hdr:
- shard-dg1: NOTRUN -> [SKIP][151] ([i915#16600])
[151]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][152] ([i915#16600])
[152]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_feature_discovery@psr1:
- shard-dg1: NOTRUN -> [SKIP][153] ([i915#658])
[153]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_flip@2x-absolute-wf_vblank-interruptible:
- shard-dg2: NOTRUN -> [SKIP][154] ([i915#9934])
[154]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@kms_flip@2x-absolute-wf_vblank-interruptible.html

* igt@kms_flip@2x-busy-flip:
- shard-tglu-1: NOTRUN -> [SKIP][155] ([i915#3637] / [i915#9934]) +1 other test skip
[155]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_flip@2x-flip-vs-fences:
- shard-mtlp: NOTRUN -> [SKIP][156] ([i915#8381])
[156]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_flip@2x-flip-vs-panning:
- shard-rkl: NOTRUN -> [SKIP][157] ([i915#9934]) +4 other tests skip
[157]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_flip@2x-flip-vs-rmfb:
- shard-mtlp: NOTRUN -> [SKIP][158] ([i915#3637] / [i915#9934]) +1 other test skip
[158]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_flip@2x-flip-vs-suspend-interruptible:
- shard-glk: NOTRUN -> [INCOMPLETE][159] ([i915#12745] / [i915#4839]) +1 other test incomplete
[159]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk6/igt@[email protected]

* igt@kms_flip@2x-flip-vs-suspend-interruptible@ac-hdmi-a1-hdmi-a2:
- shard-glk: NOTRUN -> [INCOMPLETE][160] ([i915#12745]) +1 other test incomplete
[160]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk6/igt@kms_flip@[email protected]

* igt@kms_flip@2x-nonexisting-fb:
- shard-tglu: NOTRUN -> [SKIP][161] ([i915#3637] / [i915#9934]) +5 other tests skip
[161]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_flip@2x-wf_vblank-ts-check:
- shard-dg1: NOTRUN -> [SKIP][162] ([i915#9934]) +3 other tests skip
[162]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_flip@2x-wf_vblank-ts-check.html

* igt@kms_flip@flip-vs-expired-vblank:
- shard-glk: [PASS][163] -> [FAIL][164] ([i915#13027]) +1 other test fail
[163]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk5/igt@[email protected]
[164]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk4/igt@[email protected]
- shard-tglu: [PASS][165] -> [FAIL][166] ([i915#13027]) +1 other test fail
[165]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-tglu-4/igt@[email protected]
[166]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-9/igt@[email protected]

* igt@kms_flip@flip-vs-fences:
- shard-dg1: NOTRUN -> [SKIP][167] ([i915#8381])
[167]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytileccs-upscaling:
- shard-tglu: NOTRUN -> [SKIP][168] ([i915#15643]) +2 other tests skip
[168]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytileccs-upscaling.html

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling:
- shard-tglu-1: NOTRUN -> [SKIP][169] ([i915#15643])
[169]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-upscaling:
- shard-rkl: NOTRUN -> [SKIP][170] ([i915#15643]) +3 other tests skip
[170]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-upscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling:
- shard-dg1: NOTRUN -> [SKIP][171] ([i915#15643]) +1 other test skip
[171]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling.html

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs-downscaling:
- shard-mtlp: NOTRUN -> [SKIP][172] ([i915#15643])
[172]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs-downscaling.html

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-rkl: NOTRUN -> [SKIP][173] ([i915#1825]) +4 other tests skip
[173]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@fbc-tiling-4:
- shard-rkl: NOTRUN -> [SKIP][174] ([i915#5439])
[174]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbchdr-2p-primscrn-pri-indfb-draw-pwrite:
- shard-dg1: NOTRUN -> [SKIP][175] +32 other tests skip
[175]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_frontbuffer_tracking@fbchdr-2p-primscrn-pri-indfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-shrfb-plflip-blt:
- shard-tglu: NOTRUN -> [SKIP][176] +72 other tests skip
[176]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-shrfb-plflip-blt.html

* igt@kms_frontbuffer_tracking@fbchdr-rgb101010-draw-blt:
- shard-dg2: NOTRUN -> [SKIP][177] ([i915#15989]) +1 other test skip
[177]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbchdr-suspend:
- shard-glk10: NOTRUN -> [INCOMPLETE][178] ([i915#16056] / [i915#16593])
[178]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk10/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscreen-pri-shrfb-draw-mmap-wc:
- shard-dg1: NOTRUN -> [SKIP][179] ([i915#15104] / [i915#15990])
[179]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscreen-pri-shrfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-pgflip-blt:
- shard-tglu: NOTRUN -> [SKIP][180] ([i915#15102]) +32 other tests skip
[180]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-indfb-pgflip-blt.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-indfb-fliptrack-mmap-gtt:
- shard-mtlp: NOTRUN -> [SKIP][181] ([i915#15990] / [i915#8708])
[181]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-spr-indfb-onoff:
- shard-mtlp: NOTRUN -> [SKIP][182] ([i915#15991] / [i915#1825]) +6 other tests skip
[182]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-pri-shrfb-draw-mmap-cpu:
- shard-tglu-1: NOTRUN -> [SKIP][183] ([i915#15102]) +16 other tests skip
[183]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-pri-shrfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-pri-shrfb-draw-mmap-gtt:
- shard-dg2: NOTRUN -> [SKIP][184] ([i915#15990]) +1 other test skip
[184]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-pri-shrfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-rkl: NOTRUN -> [SKIP][185] ([i915#14544] / [i915#15102]) +2 other tests skip
[185]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-spr-indfb-draw-mmap-cpu.html
- shard-dg1: NOTRUN -> [SKIP][186] ([i915#15102]) +20 other tests skip
[186]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-spr-indfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-rte:
- shard-mtlp: NOTRUN -> [SKIP][187] ([i915#15989]) +8 other tests skip
[187]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-dg1: NOTRUN -> [SKIP][188] ([i915#15990]) +10 other tests skip
[188]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-cur-indfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-shrfb-plflip-blt:
- shard-tglu-1: NOTRUN -> [SKIP][189] +46 other tests skip
[189]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-primscrn-shrfb-plflip-blt.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-scndscrn-spr-indfb-draw-render:
- shard-rkl: NOTRUN -> [SKIP][190] ([i915#14544]) +1 other test skip
[190]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-scndscrn-spr-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-rgb101010-draw-mmap-cpu:
- shard-dg2: NOTRUN -> [SKIP][191] ([i915#15102]) +3 other tests skip
[191]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-indfb-draw-blt:
- shard-tglu-1: NOTRUN -> [SKIP][192] ([i915#15989]) +9 other tests skip
[192]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-indfb-draw-blt.html

* igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-shrfb-draw-blt:
- shard-glk: [PASS][193] -> [SKIP][194] +1 other test skip
[193]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk8/igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-shrfb-draw-blt.html
[194]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk4/igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-shrfb-draw-blt.html

* igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-shrfb-draw-mmap-gtt:
- shard-tglu: NOTRUN -> [SKIP][195] ([i915#15989]) +15 other tests skip
[195]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_frontbuffer_tracking@hdr-1p-offscreen-pri-shrfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@hdr-1p-primscrn-pri-shrfb-draw-mmap-cpu:
- shard-rkl: [PASS][196] -> [SKIP][197] ([i915#15989]) +5 other tests skip
[196]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_frontbuffer_tracking@hdr-1p-primscrn-pri-shrfb-draw-mmap-cpu.html
[197]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_frontbuffer_tracking@hdr-1p-primscrn-pri-shrfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@hdr-1p-primscrn-spr-indfb-draw-pwrite:
- shard-dg1: NOTRUN -> [SKIP][198] ([i915#15989]) +9 other tests skip
[198]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_frontbuffer_tracking@hdr-1p-primscrn-spr-indfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@hdr-2p-primscrn-cur-indfb-draw-mmap-wc:
- shard-glk: NOTRUN -> [SKIP][199] +328 other tests skip
[199]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk2/igt@kms_frontbuffer_tracking@hdr-2p-primscrn-cur-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@hdr-2p-scndscrn-spr-indfb-draw-blt:
- shard-mtlp: NOTRUN -> [SKIP][200] ([i915#15991]) +11 other tests skip
[200]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@hdr-rgb101010-draw-pwrite:
- shard-rkl: NOTRUN -> [SKIP][201] ([i915#15989]) +19 other tests skip
[201]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-move:
- shard-rkl: NOTRUN -> [SKIP][202] ([i915#15102]) +27 other tests skip
[202]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-indfb-draw-mmap-gtt:
- shard-dg1: NOTRUN -> [SKIP][203] ([i915#15990] / [i915#8708]) +5 other tests skip
[203]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-indfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@psr-rgb565-draw-mmap-gtt:
- shard-dg2: NOTRUN -> [SKIP][204] ([i915#15990] / [i915#8708]) +1 other test skip
[204]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_frontbuffer_tracking@psrhdr-2p-primscrn-indfb-plflip-blt:
- shard-dg2: NOTRUN -> [SKIP][205] ([i915#15991]) +6 other tests skip
[205]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@kms_frontbuffer_tracking@psrhdr-2p-primscrn-indfb-plflip-blt.html

* igt@kms_frontbuffer_tracking@psrhdr-farfromfence-mmap-gtt:
- shard-mtlp: NOTRUN -> [SKIP][206] ([i915#15990]) +1 other test skip
[206]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_hdr@invalid-hdr:
- shard-rkl: NOTRUN -> [SKIP][207] ([i915#16644] / [i915#3555] / [i915#8228])
[207]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_hdr@invalid-metadata-sizes:
- shard-rkl: [PASS][208] -> [SKIP][209] ([i915#16644] / [i915#3555] / [i915#8228])
[208]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[209]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_hdr@static-toggle:
- shard-tglu: NOTRUN -> [SKIP][210] ([i915#3555] / [i915#8228]) +1 other test skip
[210]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_hdr@static-toggle-suspend:
- shard-dg1: NOTRUN -> [SKIP][211] ([i915#3555] / [i915#8228])
[211]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_joiner@basic-big-joiner:
- shard-tglu: NOTRUN -> [SKIP][212] ([i915#15460]) +1 other test skip
[212]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][213] ([i915#15460])
[213]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_joiner@basic-force-big-joiner:
- shard-tglu-1: NOTRUN -> [SKIP][214] ([i915#15459])
[214]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_joiner@basic-ultra-joiner:
- shard-dg1: NOTRUN -> [SKIP][215] ([i915#15458])
[215]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_joiner@invalid-modeset-big-joiner:
- shard-dg1: NOTRUN -> [SKIP][216] ([i915#15460])
[216]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_joiner@invalid-modeset-ultra-joiner:
- shard-tglu-1: NOTRUN -> [SKIP][217] ([i915#15458])
[217]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_mst@mst-suspend-read-crc:
- shard-dg2: NOTRUN -> [SKIP][218] ([i915#16451])
[218]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_multipipe_modeset@basic-max-pipe-crc-check:
- shard-rkl: NOTRUN -> [SKIP][219] ([i915#15815])
[219]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_panel_fitting@atomic-fastset:
- shard-dg2: NOTRUN -> [SKIP][220] ([i915#6301])
[220]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_panel_fitting@legacy:
- shard-tglu: NOTRUN -> [SKIP][221] ([i915#6301])
[221]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]
- shard-dg1: NOTRUN -> [SKIP][222] ([i915#6301])
[222]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc@pipe-a-hdmi-a-1:
- shard-glk11: NOTRUN -> [INCOMPLETE][223] ([i915#12756] / [i915#13409] / [i915#13476]) +1 other test incomplete
[223]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@kms_pipe_crc_basic@[email protected]

* igt@kms_pipe_stress@stress-xrgb8888-ytiled:
- shard-mtlp: NOTRUN -> [SKIP][224] ([i915#13705])
[224]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_plane@pixel-format-4-tiled-dg2-rc-ccs-cc-modifier-source-clamping:
- shard-mtlp: NOTRUN -> [SKIP][225] ([i915#15709])
[225]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_plane@pixel-format-4-tiled-dg2-rc-ccs-cc-modifier-source-clamping.html

* igt@kms_plane@pixel-format-4-tiled-lnl-ccs-modifier-source-clamping:
- shard-tglu: NOTRUN -> [SKIP][226] ([i915#15709]) +2 other tests skip
[226]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@kms_plane@pixel-format-4-tiled-lnl-ccs-modifier-source-clamping.html

* igt@kms_plane@pixel-format-4-tiled-modifier:
- shard-tglu-1: NOTRUN -> [SKIP][227] ([i915#15709])
[227]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_plane@pixel-format-y-tiled-gen12-mc-ccs-modifier-source-clamping:
- shard-dg1: NOTRUN -> [SKIP][228] ([i915#15709]) +3 other tests skip
[228]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@kms_plane@pixel-format-y-tiled-gen12-mc-ccs-modifier-source-clamping.html

* igt@kms_plane@pixel-format-y-tiled-gen12-rc-ccs-cc-modifier@pipe-b-plane-7:
- shard-dg1: NOTRUN -> [SKIP][229] ([i915#16386]) +1 other test skip
[229]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_plane@pixel-format-y-tiled-gen12-rc-ccs-cc-modifier@pipe-b-plane-7.html

* igt@kms_plane@pixel-format-y-tiled-gen12-rc-ccs-modifier@pipe-a-plane-7:
- shard-tglu: NOTRUN -> [SKIP][230] ([i915#16386]) +3 other tests skip
[230]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@kms_plane@[email protected]

* igt@kms_plane@pixel-format-yf-tiled-ccs-modifier:
- shard-dg2: NOTRUN -> [SKIP][231] ([i915#15709])
[231]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_plane@pixel-format-yf-tiled-modifier-source-clamping:
- shard-rkl: NOTRUN -> [SKIP][232] ([i915#15709])
[232]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend@pipe-b:
- shard-rkl: [PASS][233] -> [INCOMPLETE][234] ([i915#14412]) +1 other test incomplete
[233]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-7/igt@kms_plane@[email protected]
[234]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-3/igt@kms_plane@[email protected]

* igt@kms_plane_alpha_blend@alpha-transparent-fb:
- shard-glk11: NOTRUN -> [FAIL][235] ([i915#10647] / [i915#12177])
[235]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@[email protected]

* igt@kms_plane_alpha_blend@alpha-transparent-fb@pipe-a-hdmi-a-1:
- shard-glk11: NOTRUN -> [FAIL][236] ([i915#10647]) +1 other test fail
[236]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@kms_plane_alpha_blend@[email protected]

* igt@kms_plane_lowres@tiling-x:
- shard-mtlp: NOTRUN -> [SKIP][237] ([i915#11614] / [i915#3582]) +1 other test skip
[237]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_plane_lowres@tiling-x@pipe-c-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][238] ([i915#10226] / [i915#11614] / [i915#3582]) +2 other tests skip
[238]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_plane_lowres@[email protected]

* igt@kms_plane_scaling@2x-scaler-multi-pipe:
- shard-mtlp: NOTRUN -> [SKIP][239] ([i915#15887] / [i915#9809])
[239]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_plane_scaling@plane-downscale-factor-0-75-with-rotation@pipe-a:
- shard-tglu: NOTRUN -> [SKIP][240] ([i915#15329]) +4 other tests skip
[240]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-upscale-20x20-with-rotation@pipe-a:
- shard-rkl: NOTRUN -> [SKIP][241] ([i915#15329]) +7 other tests skip
[241]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-upscale-factor-0-25-with-rotation@pipe-d:
- shard-tglu-1: NOTRUN -> [SKIP][242] ([i915#15329]) +4 other tests skip
[242]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_plane_scaling@[email protected]

* igt@kms_pm_backlight@fade-with-suspend:
- shard-tglu-1: NOTRUN -> [SKIP][243] ([i915#12343] / [i915#9812])
[243]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_pm_dc@dc5-pageflip-negative:
- shard-rkl: NOTRUN -> [SKIP][244] ([i915#9685])
[244]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_pm_dc@dc6-psr:
- shard-tglu: NOTRUN -> [SKIP][245] ([i915#15948])
[245]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_pm_dc@dc9-dpms:
- shard-tglu: NOTRUN -> [SKIP][246] ([i915#15739])
[246]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_pm_lpsp@screens-disabled:
- shard-rkl: NOTRUN -> [SKIP][247] ([i915#8430])
[247]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_pm_rpm@dpms-lpsp:
- shard-dg1: [PASS][248] -> [SKIP][249] ([i915#15073]) +1 other test skip
[248]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-14/igt@[email protected]
[249]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-17/igt@[email protected]

* igt@kms_pm_rpm@dpms-mode-unset-non-lpsp:
- shard-tglu: NOTRUN -> [SKIP][250] ([i915#15073])
[250]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_pm_rpm@modeset-non-lpsp:
- shard-rkl: [PASS][251] -> [SKIP][252] ([i915#15073]) +2 other tests skip
[251]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[252]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@[email protected]

* igt@kms_pm_rpm@package-g7:
- shard-tglu-1: NOTRUN -> [SKIP][253] ([i915#15403])
[253]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_pm_rpm@system-suspend-modeset:
- shard-rkl: [PASS][254] -> [INCOMPLETE][255] ([i915#14419])
[254]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-2/igt@[email protected]
[255]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-3/igt@[email protected]

* igt@kms_prime@basic-crc-hybrid:
- shard-tglu-1: NOTRUN -> [SKIP][256] ([i915#6524])
[256]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_prime@basic-modeset-hybrid:
- shard-dg1: NOTRUN -> [SKIP][257] ([i915#6524])
[257]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_psr2_sf@fbc-pr-cursor-plane-move-continuous-exceed-sf:
- shard-rkl: NOTRUN -> [SKIP][258] ([i915#11520]) +1 other test skip
[258]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_psr2_sf@fbc-pr-overlay-primary-update-sf-dmg-area:
- shard-tglu-1: NOTRUN -> [SKIP][259] ([i915#11520]) +2 other tests skip
[259]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf:
- shard-tglu: NOTRUN -> [SKIP][260] ([i915#11520]) +2 other tests skip
[260]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf@pipe-a-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][261] ([i915#9808])
[261]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf@pipe-a-edp-1.html

* igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf@pipe-b-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][262] ([i915#12316]) +1 other test skip
[262]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf@pipe-b-edp-1.html

* igt@kms_psr2_sf@fbc-psr2-plane-move-sf-dmg-area:
- shard-dg2: NOTRUN -> [SKIP][263] ([i915#11520])
[263]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-primary-plane-update-sf-dmg-area:
- shard-glk: NOTRUN -> [SKIP][264] ([i915#11520]) +6 other tests skip
[264]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk2/igt@[email protected]

* igt@kms_psr2_sf@pr-overlay-plane-update-continuous-sf:
- shard-snb: NOTRUN -> [SKIP][265] ([i915#11520]) +8 other tests skip
[265]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-snb1/igt@[email protected]

* igt@kms_psr2_sf@pr-primary-plane-update-sf-dmg-area:
- shard-glk11: NOTRUN -> [SKIP][266] ([i915#11520]) +2 other tests skip
[266]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk11/igt@[email protected]

* igt@kms_psr2_sf@psr2-cursor-plane-move-continuous-exceed-fully-sf:
- shard-glk10: NOTRUN -> [SKIP][267] ([i915#11520]) +2 other tests skip
[267]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk10/igt@kms_psr2_sf@psr2-cursor-plane-move-continuous-exceed-fully-sf.html

* igt@kms_psr2_sf@psr2-overlay-primary-update-sf-dmg-area:
- shard-dg1: NOTRUN -> [SKIP][268] ([i915#11520]) +2 other tests skip
[268]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_psr2_su@page_flip-p010:
- shard-rkl: NOTRUN -> [SKIP][269] ([i915#9683])
[269]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@kms_psr2_su@page_flip-p010.html

* igt@kms_psr@fbc-psr-basic:
- shard-dg2: NOTRUN -> [SKIP][270] ([i915#1072] / [i915#9732])
[270]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-3/igt@[email protected]

* igt@kms_psr@fbc-psr2-basic:
- shard-dg1: NOTRUN -> [SKIP][271] ([i915#1072] / [i915#9732]) +9 other tests skip
[271]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_psr@fbc-psr2-primary-blt:
- shard-tglu-1: NOTRUN -> [SKIP][272] ([i915#9732]) +6 other tests skip
[272]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@[email protected]

* igt@kms_psr@pr-primary-page-flip:
- shard-mtlp: NOTRUN -> [SKIP][273] ([i915#9688]) +4 other tests skip
[273]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_psr@pr-sprite-plane-move:
- shard-tglu: NOTRUN -> [SKIP][274] ([i915#9732]) +16 other tests skip
[274]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-8/igt@[email protected]

* igt@kms_psr@psr-sprite-plane-move:
- shard-rkl: NOTRUN -> [SKIP][275] ([i915#1072] / [i915#9732]) +12 other tests skip
[275]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_psr_stress_test@flip-primary-invalidate-overlay:
- shard-dg1: NOTRUN -> [SKIP][276] ([i915#15949])
[276]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_rotation_crc@exhaust-fences:
- shard-dg1: NOTRUN -> [SKIP][277] ([i915#4884])
[277]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]

* igt@kms_rotation_crc@primary-yf-tiled-reflect-x-180:
- shard-rkl: NOTRUN -> [SKIP][278] ([i915#5289])
[278]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@kms_selftest@drm_framebuffer:
- shard-tglu-1: NOTRUN -> [ABORT][279] ([i915#13179]) +1 other test abort
[279]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-1/igt@kms_selftest@drm_framebuffer.html
- shard-dg1: NOTRUN -> [ABORT][280] ([i915#13179]) +1 other test abort
[280]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@kms_selftest@drm_framebuffer.html
- shard-snb: NOTRUN -> [ABORT][281] ([i915#13179]) +1 other test abort
[281]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-snb7/igt@kms_selftest@drm_framebuffer.html

* igt@kms_setmode@basic:
- shard-mtlp: [PASS][282] -> [FAIL][283] ([i915#15106]) +1 other test fail
[282]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-8/igt@[email protected]
[283]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-3/igt@[email protected]

* igt@kms_setmode@invalid-clone-single-crtc:
- shard-dg1: NOTRUN -> [SKIP][284] ([i915#3555]) +2 other tests skip
[284]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern:
- shard-dg1: NOTRUN -> [SKIP][285] ([i915#8623])
[285]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][286] ([i915#8623]) +1 other test skip
[286]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern-with-chamelium:
- shard-mtlp: NOTRUN -> [SKIP][287] ([i915#8623])
[287]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

* igt@kms_vblank@ts-continuation-suspend@pipe-a-hdmi-a-2:
- shard-rkl: [PASS][288] -> [INCOMPLETE][289] ([i915#12276])
[288]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-1/igt@kms_vblank@[email protected]
[289]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@kms_vblank@[email protected]

* igt@kms_vrr@negative-basic:
- shard-dg1: NOTRUN -> [SKIP][290] ([i915#3555] / [i915#9906])
[290]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-12/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][291] ([i915#3555] / [i915#9906])
[291]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-5/igt@[email protected]

* igt@kms_vrr@seamless-rr-switch-vrr:
- shard-rkl: NOTRUN -> [SKIP][292] ([i915#9906]) +1 other test skip
[292]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@perf@mi-rpc:
- shard-rkl: NOTRUN -> [SKIP][293] ([i915#2434])
[293]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@perf_pmu@busy-start@vecs0:
- shard-tglu: [PASS][294] -> [FAIL][295] ([i915#17084])
[294]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-tglu-7/igt@perf_pmu@[email protected]
[295]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-7/igt@perf_pmu@[email protected]

* igt@perf_pmu@rc6-suspend:
- shard-glk: [PASS][296] -> [INCOMPLETE][297] ([i915#13356] / [i915#16236])
[296]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk5/igt@[email protected]
[297]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk6/igt@[email protected]

* igt@prime_udl@share-import:
- shard-rkl: NOTRUN -> [SKIP][298] ([i915#16420])
[298]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@prime_vgem@coherency-gtt:
- shard-mtlp: NOTRUN -> [SKIP][299] ([i915#3708] / [i915#4077])
[299]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-7/igt@[email protected]

#### Possible fixes ####

* igt@gem_workarounds@suspend-resume-fd:
- shard-rkl: [INCOMPLETE][300] ([i915#13356]) -> [PASS][301]
[300]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-4/igt@[email protected]
[301]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-2/igt@[email protected]

* igt@i915_suspend@sysfs-reader:
- shard-glk: [INCOMPLETE][302] ([i915#16182] / [i915#4817]) -> [PASS][303]
[302]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk8/igt@[email protected]
[303]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk4/igt@[email protected]

* igt@kms_big_fb@4-tiled-64bpp-rotate-180:
- shard-mtlp: [FAIL][304] ([i915#15733] / [i915#5138]) -> [PASS][305]
[304]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-3/igt@[email protected]
[305]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-8/igt@[email protected]

* igt@kms_ccs@crc-primary-suspend-y-tiled-gen12-rc-ccs-cc:
- shard-rkl: [INCOMPLETE][306] ([i915#14694] / [i915#15582]) -> [PASS][307]
[306]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[307]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-8/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-rkl: [INCOMPLETE][308] ([i915#9878]) -> [PASS][309]
[308]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-7/igt@[email protected]
[309]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-rkl: [INCOMPLETE][310] ([i915#16276] / [i915#6113]) -> [PASS][311]
[310]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[311]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_force_connector_basic@force-edid:
- shard-mtlp: [SKIP][312] ([i915#15672]) -> [PASS][313]
[312]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-1/igt@[email protected]
[313]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-rgb101010-draw-pwrite:
- shard-dg1: [DMESG-WARN][314] ([i915#4423]) -> [PASS][315] +1 other test pass
[314]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-15/igt@[email protected]
[315]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-15/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbchdr-tiling-linear:
- shard-rkl: [SKIP][316] ([i915#15989]) -> [PASS][317] +8 other tests pass
[316]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[317]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@hdr-1p-primscrn-spr-indfb-onoff:
- shard-glk: [SKIP][318] -> [PASS][319] +10 other tests pass
[318]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-glk9/igt@[email protected]
[319]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-glk8/igt@[email protected]

* igt@kms_hdmi_inject@inject-4k:
- shard-mtlp: [SKIP][320] ([i915#15725]) -> [PASS][321]
[320]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-1/igt@[email protected]
[321]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-6/igt@[email protected]

* igt@kms_pm_rpm@dpms-non-lpsp:
- shard-dg2: [SKIP][322] ([i915#15073]) -> [PASS][323]
[322]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg2-4/igt@[email protected]
[323]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg2-7/igt@[email protected]

* igt@kms_pm_rpm@modeset-non-lpsp-stress:
- shard-rkl: [SKIP][324] ([i915#15073]) -> [PASS][325] +1 other test pass
[324]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-8/igt@[email protected]
[325]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]
- shard-dg1: [SKIP][326] ([i915#15073]) -> [PASS][327] +1 other test pass
[326]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-14/igt@[email protected]
[327]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-17/igt@[email protected]

* igt@perf_pmu@busy-double-start:
- shard-mtlp: [FAIL][328] ([i915#4349]) -> [PASS][329] +2 other tests pass
[328]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-mtlp-8/igt@[email protected]
[329]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-mtlp-1/igt@[email protected]

* igt@perf_pmu@busy-start@bcs0:
- shard-tglu: [FAIL][330] ([i915#17084]) -> [PASS][331] +2 other tests pass
[330]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-tglu-7/igt@perf_pmu@[email protected]
[331]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-tglu-7/igt@perf_pmu@[email protected]

#### Warnings ####

* igt@api_intel_bb@blit-reloc-purge-cache:
- shard-rkl: [SKIP][332] ([i915#14544] / [i915#8411]) -> [SKIP][333] ([i915#8411])
[332]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[333]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@gem_ccs@block-copy-compressed:
- shard-rkl: [SKIP][334] ([i915#3555] / [i915#9323]) -> [SKIP][335] ([i915#14544] / [i915#3555] / [i915#9323])
[334]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[335]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_ccs@block-multicopy-compressed:
- shard-rkl: [SKIP][336] ([i915#14544] / [i915#9323]) -> [SKIP][337] ([i915#9323])
[336]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[337]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@gem_ccs@suspend-resume:
- shard-rkl: [SKIP][338] ([i915#9323]) -> [SKIP][339] ([i915#14544] / [i915#9323])
[338]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[339]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_exec_balancer@parallel-contexts:
- shard-rkl: [SKIP][340] ([i915#14544] / [i915#4525]) -> [SKIP][341] ([i915#4525])
[340]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[341]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@gem_exec_reloc@basic-active:
- shard-rkl: [SKIP][342] ([i915#3281]) -> [SKIP][343] ([i915#14544] / [i915#3281]) +4 other tests skip
[342]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[343]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_exec_reloc@basic-gtt-read-noreloc:
- shard-rkl: [SKIP][344] ([i915#14544] / [i915#3281]) -> [SKIP][345] ([i915#3281])
[344]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[345]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@gem_lmem_swapping@heavy-verify-random:
- shard-rkl: [SKIP][346] ([i915#4613]) -> [SKIP][347] ([i915#14544] / [i915#4613]) +1 other test skip
[346]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[347]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-rkl: [SKIP][348] ([i915#3282]) -> [SKIP][349] ([i915#14544] / [i915#3282]) +1 other test skip
[348]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[349]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_tiled_pread_basic@basic:
- shard-rkl: [SKIP][350] ([i915#15656]) -> [SKIP][351] ([i915#14544] / [i915#15656])
[350]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[351]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gem_userptr_blits@forbidden-operations:
- shard-rkl: [SKIP][352] ([i915#3282] / [i915#3297]) -> [SKIP][353] ([i915#14544] / [i915#3282] / [i915#3297])
[352]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[353]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@gen9_exec_parse@batch-zero-length:
- shard-rkl: [SKIP][354] ([i915#14544] / [i915#2527]) -> [SKIP][355] ([i915#2527])
[354]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[355]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@gen9_exec_parse@bb-chained:
- shard-rkl: [SKIP][356] ([i915#2527]) -> [SKIP][357] ([i915#14544] / [i915#2527])
[356]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[357]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@i915_pm_sseu@full-enable:
- shard-rkl: [SKIP][358] ([i915#4387]) -> [SKIP][359] ([i915#14544] / [i915#4387])
[358]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[359]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@intel_hwmon@hwmon-read:
- shard-rkl: [SKIP][360] ([i915#14544] / [i915#7707]) -> [SKIP][361] ([i915#7707])
[360]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[361]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels:
- shard-rkl: [SKIP][362] ([i915#1769] / [i915#3555]) -> [SKIP][363] ([i915#14544] / [i915#1769] / [i915#3555])
[362]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels.html
[363]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels.html

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-0-hflip:
- shard-rkl: [SKIP][364] ([i915#14544] / [i915#5286]) -> [SKIP][365] ([i915#5286])
[364]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[365]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-180-hflip:
- shard-rkl: [SKIP][366] ([i915#5286]) -> [SKIP][367] ([i915#14544] / [i915#5286]) +2 other tests skip
[366]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[367]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_big_fb@x-tiled-32bpp-rotate-270:
- shard-rkl: [SKIP][368] ([i915#3638]) -> [SKIP][369] ([i915#14544] / [i915#3638]) +2 other tests skip
[368]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[369]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_big_fb@x-tiled-8bpp-rotate-90:
- shard-rkl: [SKIP][370] ([i915#14544] / [i915#3638]) -> [SKIP][371] ([i915#3638])
[370]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[371]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_ccs@ccs-on-another-bo-y-tiled-ccs@pipe-b-hdmi-a-2:
- shard-rkl: [SKIP][372] ([i915#14544] / [i915#6095]) -> [SKIP][373] ([i915#6095]) +5 other tests skip
[372]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_ccs@[email protected]
[373]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_ccs@[email protected]

* igt@kms_ccs@crc-primary-suspend-yf-tiled-ccs:
- shard-rkl: [SKIP][374] ([i915#14098] / [i915#6095]) -> [SKIP][375] ([i915#14098] / [i915#14544] / [i915#6095]) +12 other tests skip
[374]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[375]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-dg2-rc-ccs-cc@pipe-c-hdmi-a-2:
- shard-rkl: [SKIP][376] ([i915#14098] / [i915#14544] / [i915#6095]) -> [SKIP][377] ([i915#14098] / [i915#6095]) +5 other tests skip
[376]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_ccs@crc-sprite-planes-basic-4-tiled-dg2-rc-ccs-cc@pipe-c-hdmi-a-2.html
[377]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_ccs@crc-sprite-planes-basic-4-tiled-dg2-rc-ccs-cc@pipe-c-hdmi-a-2.html

* igt@kms_ccs@crc-sprite-planes-basic-4-tiled-lnl-ccs:
- shard-rkl: [SKIP][378] ([i915#12313]) -> [SKIP][379] ([i915#12313] / [i915#14544]) +1 other test skip
[378]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[379]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_ccs@random-ccs-data-yf-tiled-ccs@pipe-a-hdmi-a-2:
- shard-rkl: [SKIP][380] ([i915#6095]) -> [SKIP][381] ([i915#14544] / [i915#6095]) +7 other tests skip
[380]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@kms_ccs@[email protected]
[381]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_ccs@[email protected]

* igt@kms_cdclk@mode-transition-all-outputs:
- shard-rkl: [SKIP][382] ([i915#14544] / [i915#3742]) -> [SKIP][383] ([i915#3742])
[382]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[383]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_chamelium_color_pipeline@plane-lut1d-ctm3x4-lut1d:
- shard-rkl: [SKIP][384] ([i915#16471]) -> [SKIP][385] ([i915#14544] / [i915#16471])
[384]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[385]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd-storm:
- shard-rkl: [SKIP][386] ([i915#11151] / [i915#7828]) -> [SKIP][387] ([i915#11151] / [i915#14544] / [i915#7828]) +2 other tests skip
[386]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[387]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-rkl: [SKIP][388] ([i915#15330] / [i915#3116]) -> [SKIP][389] ([i915#14544] / [i915#15330] / [i915#3116])
[388]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[389]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_content_protection@dp-mst-type-0-hdcp14:
- shard-rkl: [SKIP][390] ([i915#15330]) -> [SKIP][391] ([i915#14544] / [i915#15330])
[390]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[391]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_content_protection@mei-interface:
- shard-rkl: [SKIP][392] ([i915#15865]) -> [SKIP][393] ([i915#14544] / [i915#15865]) +1 other test skip
[392]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[393]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_content_protection@srm:
- shard-rkl: [SKIP][394] ([i915#14544] / [i915#15865]) -> [SKIP][395] ([i915#15865])
[394]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[395]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-max-size:
- shard-rkl: [SKIP][396] ([i915#3555]) -> [SKIP][397] ([i915#14544] / [i915#3555])
[396]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[397]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_cursor_crc@cursor-rapid-movement-32x10:
- shard-rkl: [SKIP][398] ([i915#14544] / [i915#3555]) -> [SKIP][399] ([i915#3555])
[398]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[399]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_dirtyfb@drrs-dirtyfb-ioctl:
- shard-rkl: [SKIP][400] ([i915#14544] / [i915#9723]) -> [SKIP][401] ([i915#9723])
[400]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[401]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-5/igt@[email protected]

* igt@kms_dsc@dsc-with-formats-bigjoiner:
- shard-rkl: [SKIP][402] ([i915#16361]) -> [SKIP][403] ([i915#14544] / [i915#16361])
[402]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[403]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_dsc@dsc-with-output-formats-with-bpc:
- shard-rkl: [SKIP][404] ([i915#14544] / [i915#16361]) -> [SKIP][405] ([i915#16361])
[404]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[405]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_feature_discovery@chamelium:
- shard-rkl: [SKIP][406] ([i915#16084]) -> [SKIP][407] ([i915#14544] / [i915#16084])
[406]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[407]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_flip@2x-flip-vs-fences:
- shard-rkl: [SKIP][408] ([i915#9934]) -> [SKIP][409] ([i915#14544] / [i915#9934]) +3 other tests skip
[408]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[409]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_flip@2x-plain-flip:
- shard-rkl: [SKIP][410] ([i915#14544] / [i915#9934]) -> [SKIP][411] ([i915#9934]) +3 other tests skip
[410]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[411]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling:
- shard-rkl: [SKIP][412] ([i915#14544] / [i915#15643]) -> [SKIP][413] ([i915#15643])
[412]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling.html
[413]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling.html

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc:
- shard-rkl: [SKIP][414] ([i915#1825]) -> [SKIP][415] ([i915#14544] / [i915#1825]) +1 other test skip
[414]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc.html
[415]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-spr-indfb-draw-mmap-wc:
- shard-rkl: [SKIP][416] -> [SKIP][417] ([i915#14544]) +45 other tests skip
[416]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-spr-indfb-draw-mmap-wc.html
[417]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_frontbuffer_tracking@fbchdr-2p-scndscrn-spr-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-shrfb-pgflip-blt:
- shard-rkl: [SKIP][418] ([i915#14544] / [i915#15102]) -> [SKIP][419] ([i915#15102]) +9 other tests skip
[418]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-shrfb-pgflip-blt.html
[419]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-primscrn-shrfb-pgflip-blt.html

* igt@kms_frontbuffer_tracking@fbcpsrhdr-1p-rte:
- shard-rkl: [SKIP][420] ([i915#15102]) -> [SKIP][421] ([i915#14544] / [i915#15102]) +20 other tests skip
[420]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[421]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-scndscrn-spr-indfb-fullscreen:
- shard-dg1: [SKIP][422] ([i915#4423]) -> [SKIP][423]
[422]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-19/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-scndscrn-spr-indfb-fullscreen.html
[423]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-18/igt@kms_frontbuffer_tracking@fbcpsrhdr-2p-scndscrn-spr-indfb-fullscreen.html

* igt@kms_frontbuffer_tracking@hdr-2p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-dg1: [SKIP][424] -> [SKIP][425] ([i915#4423])
[424]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-19/igt@kms_frontbuffer_tracking@hdr-2p-primscrn-spr-indfb-draw-mmap-cpu.html
[425]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-19/igt@kms_frontbuffer_tracking@hdr-2p-primscrn-spr-indfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-indfb-draw-render:
- shard-rkl: [SKIP][426] ([i915#14544]) -> [SKIP][427] +29 other tests skip
[426]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-indfb-draw-render.html
[427]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-mmap-gtt:
- shard-rkl: [SKIP][428] ([i915#14544] / [i915#1825]) -> [SKIP][429] ([i915#1825])
[428]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-mmap-gtt.html
[429]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-mmap-gtt.html

* igt@kms_joiner@basic-big-joiner:
- shard-rkl: [SKIP][430] ([i915#15460]) -> [SKIP][431] ([i915#14544] / [i915#15460])
[430]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[431]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_plane@pixel-format-4-tiled-dg2-rc-ccs-cc-modifier-source-clamping:
- shard-rkl: [SKIP][432] ([i915#15709]) -> [SKIP][433] ([i915#14544] / [i915#15709]) +1 other test skip
[432]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@kms_plane@pixel-format-4-tiled-dg2-rc-ccs-cc-modifier-source-clamping.html
[433]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_plane@pixel-format-4-tiled-dg2-rc-ccs-cc-modifier-source-clamping.html

* igt@kms_plane@pixel-format-yf-tiled-modifier:
- shard-rkl: [SKIP][434] ([i915#14544] / [i915#15709]) -> [SKIP][435] ([i915#15709]) +1 other test skip
[434]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[435]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_plane_multiple@2x-tiling-yf:
- shard-rkl: [SKIP][436] ([i915#13958] / [i915#14544]) -> [SKIP][437] ([i915#13958])
[436]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[437]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_plane_scaling@plane-downscale-factor-0-75-with-rotation@pipe-a:
- shard-rkl: [SKIP][438] ([i915#15329]) -> [SKIP][439] ([i915#14544] / [i915#15329]) +3 other tests skip
[438]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@kms_plane_scaling@[email protected]
[439]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@kms_plane_scaling@[email protected]

* igt@kms_pm_dc@dc5-psr-suspend-resume:
- shard-rkl: [SKIP][440] ([i915#14544] / [i915#16914]) -> [SKIP][441] ([i915#16914])
[440]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[441]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_pm_dc@dc5-retention-flops:
- shard-rkl: [SKIP][442] ([i915#3828]) -> [SKIP][443] ([i915#14544] / [i915#3828])
[442]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[443]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_pm_dc@dc9-dpms:
- shard-rkl: [SKIP][444] ([i915#15739]) -> [SKIP][445] ([i915#14544] / [i915#15739])
[444]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[445]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_pm_lpsp@kms-lpsp:
- shard-rkl: [SKIP][446] ([i915#3828]) -> [SKIP][447] ([i915#9340])
[446]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-8/igt@[email protected]
[447]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]
- shard-dg1: [SKIP][448] ([i915#3828]) -> [SKIP][449] ([i915#9340])
[448]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-dg1-14/igt@[email protected]
[449]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-dg1-17/igt@[email protected]

* igt@kms_pm_rpm@dpms-lpsp:
- shard-rkl: [SKIP][450] ([i915#14544] / [i915#15073]) -> [SKIP][451] ([i915#15073])
[450]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[451]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-cursor-plane-move-continuous-exceed-sf:
- shard-rkl: [SKIP][452] ([i915#11520]) -> [SKIP][453] ([i915#11520] / [i915#14544]) +3 other tests skip
[452]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[453]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_psr2_sf@fbc-psr2-overlay-plane-update-continuous-sf:
- shard-rkl: [SKIP][454] ([i915#11520] / [i915#14544]) -> [SKIP][455] ([i915#11520]) +2 other tests skip
[454]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[455]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_psr2_su@page_flip-nv12:
- shard-rkl: [SKIP][456] ([i915#14544] / [i915#9683]) -> [SKIP][457] ([i915#9683])
[456]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@kms_psr2_su@page_flip-nv12.html
[457]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@kms_psr2_su@page_flip-nv12.html

* igt@kms_psr@pr-sprite-blt:
- shard-rkl: [SKIP][458] ([i915#1072] / [i915#14544] / [i915#9732]) -> [SKIP][459] ([i915#1072] / [i915#9732]) +3 other tests skip
[458]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[459]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_psr@psr2-cursor-blt:
- shard-rkl: [SKIP][460] ([i915#1072] / [i915#9732]) -> [SKIP][461] ([i915#1072] / [i915#14544] / [i915#9732]) +9 other tests skip
[460]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[461]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_rotation_crc@primary-yf-tiled-reflect-x-0:
- shard-rkl: [SKIP][462] ([i915#14544] / [i915#5289]) -> [SKIP][463] ([i915#5289])
[462]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[463]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@kms_rotation_crc@primary-yf-tiled-reflect-x-90:
- shard-rkl: [SKIP][464] ([i915#5289]) -> [SKIP][465] ([i915#14544] / [i915#5289])
[464]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[465]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_tiled_display@basic-test-pattern-with-chamelium:
- shard-rkl: [SKIP][466] ([i915#8623]) -> [SKIP][467] ([i915#14544] / [i915#8623])
[466]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[467]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_vblank@ts-continuation-suspend:
- shard-rkl: [ABORT][468] ([i915#15132]) -> [INCOMPLETE][469] ([i915#12276])
[468]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-1/igt@[email protected]
[469]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-4/igt@[email protected]

* igt@kms_vrr@flip-suspend:
- shard-rkl: [SKIP][470] ([i915#15243] / [i915#3555]) -> [SKIP][471] ([i915#14544] / [i915#15243] / [i915#3555])
[470]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-3/igt@[email protected]
[471]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

* igt@kms_vrr@lobf:
- shard-rkl: [SKIP][472] ([i915#11920] / [i915#14544]) -> [SKIP][473] ([i915#11920])
[472]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[473]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@prime_vgem@basic-read:
- shard-rkl: [SKIP][474] ([i915#14544] / [i915#3291] / [i915#3708]) -> [SKIP][475] ([i915#3291] / [i915#3708])
[474]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-6/igt@[email protected]
[475]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-7/igt@[email protected]

* igt@prime_vgem@coherency-gtt:
- shard-rkl: [SKIP][476] ([i915#3708]) -> [SKIP][477] ([i915#14544] / [i915#3708])
[476]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_19156/shard-rkl-5/igt@[email protected]
[477]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/shard-rkl-6/igt@[email protected]

[i915#10226]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10226
[i915#10307]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10307
[i915#10434]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10434
[i915#10647]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10647
[i915#1072]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1072
[i915#1099]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1099
[i915#11078]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11078
[i915#11151]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11151
[i915#11520]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11520
[i915#11614]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11614
[i915#11920]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11920
[i915#12177]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12177
[i915#12193]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12193
[i915#12276]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12276
[i915#12313]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12313
[i915#12316]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12316
[i915#12343]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12343
[i915#12358]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12358
[i915#12745]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12745
[i915#12756]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12756
[i915#12805]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12805
[i915#13008]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13008
[i915#13027]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13027
[i915#13046]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13046
[i915#13049]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13049
[i915#13179]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13179
[i915#13356]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13356
[i915#13409]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13409
[i915#13476]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13476
[i915#13566]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13566
[i915#13705]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13705
[i915#13958]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13958
[i915#14098]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14098
[i915#14118]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14118
[i915#14123]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14123
[i915#14152]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14152
[i915#14412]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14412
[i915#14419]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14419
[i915#14498]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14498
[i915#14544]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14544
[i915#14586]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14586
[i915#14694]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14694
[i915#14702]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14702
[i915#14888]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14888
[i915#15073]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15073
[i915#15102]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15102
[i915#15104]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15104
[i915#15106]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15106
[i915#15132]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15132
[i915#15243]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15243
[i915#15314]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15314
[i915#15329]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15329
[i915#15330]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15330
[i915#15403]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15403
[i915#15458]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15458
[i915#15459]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15459
[i915#15460]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15460
[i915#15582]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15582
[i915#15643]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15643
[i915#15656]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15656
[i915#15657]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15657
[i915#15672]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15672
[i915#15678]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15678
[i915#15709]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15709
[i915#15725]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15725
[i915#15733]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15733
[i915#15739]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15739
[i915#15815]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15815
[i915#15865]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15865
[i915#15887]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15887
[i915#15948]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15948
[i915#15949]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15949
[i915#15989]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15989
[i915#15990]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15990
[i915#15991]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15991
[i915#16056]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16056
[i915#16084]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16084
[i915#16109]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16109
[i915#16182]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16182
[i915#16236]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16236
[i915#16276]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16276
[i915#16348]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16348
[i915#16361]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16361
[i915#16386]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16386
[i915#16420]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16420
[i915#16451]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16451
[i915#16464]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16464
[i915#16471]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16471
[i915#16593]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16593
[i915#16600]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16600
[i915#16644]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16644
[i915#16680]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16680
[i915#16914]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16914
[i915#16990]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16990
[i915#17016]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17016
[i915#17084]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17084
[i915#1769]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1769
[i915#1825]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1825
[i915#2190]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2190
[i915#2434]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2434
[i915#2527]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2527
[i915#2658]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2658
[i915#280]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/280
[i915#284]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/284
[i915#2856]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2856
[i915#3116]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3116
[i915#3281]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3291
[i915#3297]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3299
[i915#3539]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3539
[i915#3555]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3555
[i915#3582]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3582
[i915#3637]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3638
[i915#3708]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3708
[i915#3742]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3742
[i915#3828]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3828
[i915#4036]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4036
[i915#4077]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4077
[i915#4083]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4083
[i915#4103]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4103
[i915#4270]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4349
[i915#4387]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4387
[i915#4423]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4423
[i915#4525]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4525
[i915#4538]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4538
[i915#4565]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4565
[i915#4613]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4613
[i915#4812]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4812
[i915#4817]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4817
[i915#4839]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4839
[i915#4852]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4852
[i915#4860]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4860
[i915#4884]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4884
[i915#4885]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4885
[i915#5138]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5138
[i915#5190]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5190
[i915#5286]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5286
[i915#5289]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5289
[i915#5354]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5354
[i915#5439]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5439
[i915#5882]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5882
[i915#6095]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6095
[i915#6113]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6113
[i915#6230]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6230
[i915#6301]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6301
[i915#6334]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6334
[i915#6335]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6335
[i915#6524]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/658
[i915#7443]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7443
[i915#7707]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7707
[i915#7828]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7828
[i915#7882]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7882
[i915#7984]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7984
[i915#8063]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8063
[i915#8228]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8228
[i915#8381]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8381
[i915#8411]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8411
[i915#8428]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8428
[i915#8430]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8430
[i915#8555]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8555
[i915#8623]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8623
[i915#8708]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8708
[i915#8812]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8812
[i915#9323]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9323
[i915#9340]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9340
[i915#9433]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9433
[i915#9683]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9683
[i915#9685]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9685
[i915#9688]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9688
[i915#9723]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9723
[i915#9732]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9732
[i915#9808]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9808
[i915#9809]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9809
[i915#9812]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9812
[i915#9878]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9878
[i915#9906]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9906
[i915#9934]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9934

Build changes
-------------

* Linux: CI_DRM_19156 -> Patchwork_138257v9

CI-20190529: 20190529
CI_DRM_19156: bb38af66c2f21340a7c081afbb7ace249357fbb5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_9099: 9099
Patchwork_138257v9: bb38af66c2f21340a7c081afbb7ace249357fbb5 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_138257v9/index.html

#34 lore raw

v5 cover Implement Wa_14021768792 to bypass m_n ratio limit

In reply to Suraj Kandpal

For Platforms that support higher link rates, there is a limitation on Link M /Link N ratio.
If the CEILING( Link M / Link N ) ratio is greater than 10.0, then hardware cannot support the given resolution / refresh rate at the given configuration.
For BMG Wa_14021768792 helps to bypass this limitation and allows it to support the ratio till 15.0.

This series adds the missing restrictions for earlier platforms and adds the Wa_14021768792 for BMG as per Bspec:49266

Ankit Nautiyal (8):
drm/i915/display: Add helper to compute link M/N ratio for reuse drm/i915/dp_mst: Limit M/N ratio for MST
drm/i915/dp: Add M/N ratio check for DP link config drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14 drm/i915/display_wa: Add support for Wa_14021768792 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n

    ratio > 10

drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

Suraj Kandpal (3):
drm/i915/dp: Limit M/N ratio for DP
drm/i915/display_wa: Add support for Wa_14014191401 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

 .../drm/i915/display/intel_crtc_state_dump.c  |   6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 113 +++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |   4 +
 .../gpu/drm/i915/display/intel_display_regs.h |  12 ++
 .../drm/i915/display/intel_display_types.h    |   2 +
 .../gpu/drm/i915/display/intel_display_wa.c   |  11 ++
 .../gpu/drm/i915/display/intel_display_wa.h   |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c       | 167 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_dp.h       |   6 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |   7 +
 10 files changed, 321 insertions(+), 9 deletions(-)
Signature · 1 line
2.34.1
#35 lore raw

PATCH v5 1/11 drm/i915/display: Add helper to compute link M/N ratio for reuse

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().
The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation and will be used in later commits.

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +11 -4
index 7602f633f49d..580c36a52921 100644
@@ -2650,13 +2650,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
+{
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock, bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes);
@@ -2673,9 +2680,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));
 }
 
 void intel_panel_sanitize_ssc(struct intel_display *display)
Signature · 1 line
2.34.1
#36 lore raw

PATCH v5 2/11 drm/i915/dp: Limit M/N ratio for DP

In reply to Suraj Kandpal

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC. With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for 8b/10b, so e.g. HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

For MSO, intel_dp_compute_config() divides adjusted_mode->crtc_clock by the MSO link count before computing the link M/N. The limits and mode_valid are evaluated before that, so divide the pixel clock by the link count there as well, otherwise the check would be too strict by that factor. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

Note: MST goes through intel_dp_compute_config_limits() as well, so its compute config is already covered here. Only pruning the modes in the MST mode_valid is left, which is added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville)
-Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction.
v3:
-Rebase on the link caps iterator based link config selection. -Set the constraint up in intel_dp_compute_config_limits() by narrowing the link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre)
-Use a limit of 4 on DG2. (Wa_14014191401)
-Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case for it. v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko) v5:
-Drop "SST" from the subject and fix the note, MST compute is already covered by the shared limits, only the MST mode_valid is left. (Mitul) -Add the Bspec reference. (Mitul)
-Drop the link_n check, compute_m_n() fixes N at 0x80000 and only halves it, so it cannot be 0. (Mitul)
-Fold in the MSO adjusted pixel clock from the M/N ratio check commit, so this commit is correct on its own. (Mitul)
-Add intel_dp_link_m_n_ratio(), so that the M/N ratio check can share it. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 114 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 120 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +2 -2
index 580c36a52921..f74e7ddf0e41 100644
@@ -2650,8 +2650,8 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
 		    pixel_clock, link_symbol_clock,
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index eecafff167d3..404168f4213b 100644
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display *display, enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 
 #endif
drivers/gpu/drm/i915/display/intel_dp.c +114 -0

150 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dp.h +2 -0
index 04fae203bb69..aa58833a405b 100644
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,
 
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
+
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
Signature · 1 line
2.34.1
#37 lore raw

PATCH v5 3/11 drm/i915/display_wa: Add support for Wa_14014191401

In reply to Suraj Kandpal

The DG2 transcoder timing generator DDA only supports a Link M/N ratio of up to 4. The Link M/N ratio limit uses a bare platform check for it.

Add Wa_14014191401 for DG2 and use it for the limit instead.

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 2 ++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c         | 3 ++-
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_wa.c +2 -0
index 2e3ff4861ef4..91395076e903 100644
@@ -94,6 +94,8 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 			IS_DISPLAY_STEP(display, STEP_A0, STEP_A2);
 	case INTEL_DISPLAY_WA_14014143976:
 		return IS_DISPLAY_STEP(display, STEP_E0, STEP_FOREVER);
+	case INTEL_DISPLAY_WA_14014191401:
+		return display->platform.dg2;
 	case INTEL_DISPLAY_WA_14016740474:
 		return IS_DISPLAY_VERx100_STEP(display, 1400, STEP_A0, STEP_C0);
 	case INTEL_DISPLAY_WA_14020863754:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index b707147a7587..f41e58d1d6e7 100644
@@ -31,6 +31,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14011508470,
 	INTEL_DISPLAY_WA_14011765242,
 	INTEL_DISPLAY_WA_14014143976,
+	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
 	INTEL_DISPLAY_WA_14025769978,
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
index 7ceb7c02b597..f3a79ae49b18 100644
@@ -70,6 +70,7 @@
 #include "intel_display_regs.h"
 #include "intel_display_rpm.h"
 #include "intel_display_types.h"
+#include "intel_display_wa.h"
 #include "intel_dp.h"
 #include "intel_dp_aux.h"
 #include "intel_dp_hdcp.h"
@@ -1271,7 +1272,7 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
-	if (display->platform.dg2)
+	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
 	return 10;
Signature · 1 line
2.34.1
#38 lore raw

PATCH v5 4/11 drm/i915/dp_mst: Limit M/N ratio for MST

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link rate.

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration.
v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +5 -0
index 7023619aaaba..f00edfb66a10 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}
+
 	/*
 	 * TODO:
 	 * - Also check if compression would allow for the mode
Signature · 1 line
2.34.1
#39 lore raw

PATCH v5 5/11 drm/i915/dp: Add M/N ratio check for DP link config

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous commits only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on every iteration.

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre)
-Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it. (Sashiko)
v4:
-Move the MSO adjusted pixel clock to the commit adding the prediction, so that one is correct on its own. (Mitul)
-Reuse intel_dp_link_m_n_ratio() instead of open coding the ratio. (Mitul)
-Drop the m_n and link_n checks, neither can be NULL or 0. Make the parameters const and move it next to intel_dp_can_support_m_n(). (Mitul)
-Drop the check on dp_m2_n2, the dp_m_n one already covers it. (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 17 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 ++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 23 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +17 -0
index f3a79ae49b18..8ef6b4c4fc8e 100644
@@ -1299,6 +1299,21 @@ intel_dp_can_support_m_n(struct intel_display *display,
 	return m_n_ratio <= max_m_n_ratio;
 }
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+
+	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
+
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}
+
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
 {
 	if (!intel_dp->mso_link_count)
@@ -3755,6 +3770,8 @@ intel_dp_compute_config(struct intel_atomic_state *state,
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m_n);
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state);
drivers/gpu/drm/i915/display/intel_dp.h +4 -0
index aa58833a405b..1e3da678c9b6 100644
@@ -26,6 +26,7 @@ struct intel_display;
 struct intel_dp;
 struct intel_dp_link_config;
 struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter;
@@ -244,4 +245,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
index f00edfb66a10..8db84975f36b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);
 	else
Signature · 1 line
2.34.1
#40 lore raw

PATCH v5 6/11 drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

LINK_N register has bits 31:24 for extended link N value used for HDMI2.1 and for an alternate mode of operation of DP TG DDA.

Add support for these extra bits.

For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK (bits 31:24) is used to handle the extended link N bits. For older platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the standard link N bits. This distinction ensures clarity and maintains the semantics for platforms that support the extended bits. In subsequent changes the logic is updated to conditionally apply the extended link N bits.

v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
v5: Drop a stale changelog entry, the DISPLAY_VER split here is
intentional. (Sashiko)

Bspec: 50488

---
 drivers/gpu/drm/i915/display/intel_display.c   | 18 ++++++++++++++++--
 .../gpu/drm/i915/display/intel_display_regs.h  |  2 ++
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -2
index f74e7ddf0e41..461b81bf8341 100644
@@ -2720,14 +2720,22 @@ void intel_set_m_n(struct intel_display *display,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
+	u32 link_n = m_n->link_n;
+
 	intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m);
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
+
+	if (DISPLAY_VER(display) >= 14)
+		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		link_n &= DATA_LINK_M_N_MASK;
+
 	/*
 	 * On BDW+ writing LINK_N arms the double buffered update
 	 * of all the M/N registers, so it must be written last.
 	 */
-	intel_de_write(display, link_n_reg, m_n->link_n);
+	intel_de_write(display, link_n_reg, link_n);
 }
 
 bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
@@ -3484,7 +3492,13 @@ void intel_get_m_n(struct intel_display *display,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
 	m_n->link_m = intel_de_read(display, link_m_reg) & DATA_LINK_M_N_MASK;
-	m_n->link_n = intel_de_read(display, link_n_reg) & DATA_LINK_M_N_MASK;
+	m_n->link_n = intel_de_read(display, link_n_reg);
+
+	if (DISPLAY_VER(display) >= 14)
+		m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		m_n->link_n &= DATA_LINK_M_N_MASK;
+
 	m_n->data_m = intel_de_read(display, data_m_reg) & DATA_LINK_M_N_MASK;
 	m_n->data_n = intel_de_read(display, data_n_reg) & DATA_LINK_M_N_MASK;
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
drivers/gpu/drm/i915/display/intel_display_regs.h +2 -0
index 2f509bd06557..983a0d9dcb9c 100644
@@ -1190,6 +1190,8 @@
 
 #define _PIPEA_LINK_N1		0x60044
 #define _PIPEB_LINK_N1		0x61044
+#define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
+#define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
Signature · 1 line
2.34.1
#41 lore raw

PATCH v5 7/11 drm/i915/display_wa: Add support for Wa_14021768792

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Some BMG ultrajoiner configurations require support for Link M/N ratios between 10.0 and 15.0. This range is not natively supported and requires a workaround.

Wa_14021768792 enables this support by utilizing HDMI_EMP_DATA, CHICKEN_TRANS and the extended bits in the LINK_N register.

Add the necessary logic to enable the workaround on applicable platforms. The underlying mechanism comes from the display C0,
so it is gated on display stepping C0 and later.

v2:
-Don't include i915_drv.h and don't use struct drm_i915_private under display/. Use display->platform.battlemage, which names the affected platform directly, instead of IS_DGFX() combined with a display version check. (Jani)
-Rebase on the reworked display WA framework, where the condition goes directly into the __intel_display_wa() switch.

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 9 +++++++++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display_wa.c +9 -0
index 91395076e903..e6f84dffdeb7 100644
@@ -102,6 +102,15 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 		return DISPLAY_VERx100(display) == 3000 ||
 			DISPLAY_VERx100(display) == 2000 ||
 			DISPLAY_VERx100(display) == 1401;
+	/*
+	 * Wa_14021768792:
+	 * Fixes: Limitation of Link M/N ratio > 10 for specific Xe2HPD platforms.
+	 * Workaround: Use HDMI_EMP_DATA, CHICKEN_BITs and extended bits in LINK_N
+	 * registers to support LINK M/N ratios from > 10 but < 15.
+	 */
+	case INTEL_DISPLAY_WA_14021768792:
+		return display->platform.battlemage &&
+			IS_DISPLAY_STEP(display, STEP_C0, STEP_FOREVER);
 	case INTEL_DISPLAY_WA_14025769978:
 		return DISPLAY_VER(display) == 35;
 	case INTEL_DISPLAY_WA_14026643300:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index f41e58d1d6e7..0b43c2144dcc 100644
@@ -34,6 +34,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
+	INTEL_DISPLAY_WA_14021768792,
 	INTEL_DISPLAY_WA_14025769978,
 	INTEL_DISPLAY_WA_14026643300,
 	INTEL_DISPLAY_WA_15013987218,
Signature · 1 line
2.34.1
#42 lore raw

PATCH v5 8/11 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n structure.

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

The workaround is limited to transcoder A. Check the transcoder rather than the pipe: for a single pipe the two are the same, but the joiner secondaries read the M/N back through the primary's transcoder, so a pipe check would have them report the workaround as not applied while their state, copied from the primary, has it applied.

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N, since writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is enabled. Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied or not.

Unlike the rest of the M/N registers, CHICKEN_TRANS and HDMI_EMP_DATA are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in intel_get_m_n():
it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)
v3:
-Check for transcoder A instead of pipe A, so that the joiner secondaries read the flag back the same as the primary. (Mitul)
-Drop bypass_m_n_ratio_limit from intel_compare_link_m_n(), the unconditional PIPE_CONF_CHECK_BOOL() already compares it. (Mitul) -Print bypass_m_n_ratio_limit in the crtc state dump. (Mitul)

Bspec: 49266

---
 .../drm/i915/display/intel_crtc_state_dump.c  |  6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 82 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |  2 +
 .../gpu/drm/i915/display/intel_display_regs.h | 10 +++
 .../drm/i915/display/intel_display_types.h    |  2 +
 5 files changed, 99 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_crtc_state_dump.c +4 -2
index 92675a88b969..c51b21222dc6 100644
@@ -36,10 +36,12 @@ intel_dump_m_n_config(struct drm_printer *p,
 		      const char *id, unsigned int lane_count,
 		      const struct intel_link_m_n *m_n)
 {
-	drm_printf(p, "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+	drm_printf(p,
+		   "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u, bypass_m_n_ratio_limit: %s\n",
 		   id, lane_count,
 		   m_n->data_m, m_n->data_n,
-		   m_n->link_m, m_n->link_n, m_n->tu);
+		   m_n->link_m, m_n->link_n, m_n->tu,
+		   str_yes_no(m_n->bypass_m_n_ratio_limit));
 }
 
 static void
drivers/gpu/drm/i915/display/intel_display.c +81 -1

124 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display.h +2 -0
index 404168f4213b..d53b7b4a80e7 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
 void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum transcoder transcoder);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +10 -0
index 983a0d9dcb9c..bbdbc27629d7 100644
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv, (trans), _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display), (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)		_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)
 #define   PORTB_HOTPLUG_INT_EN			(1 << 29)
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 8f9fb2603638..d0748837ce97 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
Signature · 1 line
2.34.1
#43 lore raw

PATCH v5 9/11 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot leave it set for the rate that gets used. (Sashiko)
v3:
-Rebase on the reworked M/N ratio check, which no longer checks m_n and link_n. m_n is no longer const, as the flag is set through it. (Mitul) -Pass the cpu transcoder to intel_display_can_bypass_m_n_limit() instead of the pipe. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 28 ++++++++++++++++++++-----
 drivers/gpu/drm/i915/display/intel_dp.h |  2 +-
 2 files changed, 24 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +23 -5
index 8ef6b4c4fc8e..8e6ba5b9fde6 100644
@@ -1300,18 +1300,32 @@ intel_dp_can_support_m_n(struct intel_display *display,
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n)
+			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
 	int m_n_ratio;
 
+	m_n->bypass_m_n_ratio_limit = false;
+
 	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio,
+					       crtc_state->cpu_transcoder)) {
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }
 
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
@@ -3393,6 +3407,9 @@ static bool can_enable_drrs(struct intel_connector *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR
 	 * as it allows more power-savings by complete shutting down display,
@@ -3427,7 +3444,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 
 	if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
drivers/gpu/drm/i915/display/intel_dp.h +1 -1
index 1e3da678c9b6..c834d90a1f81 100644
@@ -246,6 +246,6 @@ int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n);
+			      struct intel_link_m_n *m_n);
 
 #endif /* __INTEL_DP_H__ */
Signature · 1 line
2.34.1
#44 lore raw

PATCH v5 10/11 drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

On BMG platforms, the standard M/N ratio limit of 10 can be bypassed under specific conditions, as permitted by hardware capabilities.

Modify the helper intel_dp_can_support_m_n() to account for this by checking whether the platform supports bypassing the limit. The workaround is only intended for 128b/132b links, so restrict it to those.

During the mode_valid phase, the check assumes that TRANSCODER_A will be used, to allow the mode where the M/N ratio is within the limits for the workaround.

v2:
-Keep the helper static: the MST mode_valid now goes through the shared intel_dp_mode_valid_m_n() rather than calling it directly, so it no longer needs to be exported.
v3:
-Use the cpu transcoder instead of the pipe, following the change to intel_display_can_bypass_m_n_limit(). (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +15 -3
index 8e6ba5b9fde6..045524994d85 100644
@@ -1285,9 +1285,11 @@ static int intel_dp_link_m_n_ratio(u32 link_m, u32 link_n)
 
 static bool
 intel_dp_can_support_m_n(struct intel_display *display,
+			 const struct intel_crtc_state *crtc_state,
 			 int pixel_clock, int link_rate)
 {
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	enum transcoder cpu_transcoder = TRANSCODER_A;
 	u32 link_m, link_n;
 	int m_n_ratio;
 
@@ -1296,7 +1298,16 @@ intel_dp_can_support_m_n(struct intel_display *display,
 
 	m_n_ratio = intel_dp_link_m_n_ratio(link_m, link_n);
 
-	return m_n_ratio <= max_m_n_ratio;
+	if (m_n_ratio <= max_m_n_ratio)
+		return true;
+
+	if (!drm_dp_is_uhbr_rate(link_rate))
+		return false;
+
+	if (crtc_state)
+		cpu_transcoder = crtc_state->cpu_transcoder;
+
+	return intel_display_can_bypass_m_n_limit(display, m_n_ratio, cpu_transcoder);
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
@@ -1386,7 +1397,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+		if (intel_dp_can_support_m_n(display, NULL, m_n_pixel_clock,
 					     link_config.rate)) {
 			found = true;
 
@@ -2775,7 +2786,8 @@ intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
 
 	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits->link_config_filter);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (!intel_dp_can_support_m_n(display, pixel_clock, link_config.rate))
+		if (!intel_dp_can_support_m_n(display, crtc_state, pixel_clock,
+					      link_config.rate))
 			continue;
 
 		intel_dp_link_caps_filter_add(link_caps, &new_filter, &link_config);
Signature · 1 line
2.34.1
#45 lore raw

PATCH v5 11/11 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

In reply to Suraj Kandpal

Starting Xe3p max M/N ratio has been increased to 22.

Bspec: 68922

---
 drivers/gpu/drm/i915/display/intel_dp.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index 045524994d85..5864e33456a7 100644
@@ -1272,6 +1272,9 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
+	if (DISPLAY_VER(display) >= 35)
+		return 22;
+
 	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
Signature · 1 line
2.34.1
#46 lore raw

v5 cover Implement Wa_14021768792 to bypass m_n ratio limit

In reply to Suraj Kandpal

For Platforms that support higher link rates, there is a limitation on Link M /Link N ratio.
If the CEILING( Link M / Link N ) ratio is greater than 10.0, then hardware cannot support the given resolution / refresh rate at the given configuration.
For BMG Wa_14021768792 helps to bypass this limitation and allows it to support the ratio till 15.0.

This series adds the missing restrictions for earlier platforms and adds the Wa_14021768792 for BMG as per Bspec:49266

Ankit Nautiyal (8):
drm/i915/display: Add helper to compute link M/N ratio for reuse drm/i915/dp_mst: Limit M/N ratio for MST
drm/i915/dp: Add M/N ratio check for DP link config drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14 drm/i915/display_wa: Add support for Wa_14021768792 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n

    ratio > 10

drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

Suraj Kandpal (3):
drm/i915/dp: Limit M/N ratio for DP
drm/i915/display_wa: Add support for Wa_14014191401 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

 .../drm/i915/display/intel_crtc_state_dump.c  |   6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 113 +++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |   4 +
 .../gpu/drm/i915/display/intel_display_regs.h |  12 ++
 .../drm/i915/display/intel_display_types.h    |   2 +
 .../gpu/drm/i915/display/intel_display_wa.c   |  11 ++
 .../gpu/drm/i915/display/intel_display_wa.h   |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c       | 167 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_dp.h       |   6 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |   7 +
 10 files changed, 321 insertions(+), 9 deletions(-)
Signature · 1 line
2.34.1
#47 lore raw

PATCH v5 1/11 drm/i915/display: Add helper to compute link M/N ratio for reuse

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().
The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation and will be used in later commits.

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +11 -4
index 7602f633f49d..580c36a52921 100644
@@ -2650,13 +2650,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
+{
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock, bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes);
@@ -2673,9 +2680,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));
 }
 
 void intel_panel_sanitize_ssc(struct intel_display *display)
Signature · 1 line
2.34.1
#48 lore raw

PATCH v5 2/11 drm/i915/dp: Limit M/N ratio for DP

In reply to Suraj Kandpal

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC. With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for 8b/10b, so e.g. HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

For MSO, intel_dp_compute_config() divides adjusted_mode->crtc_clock by the MSO link count before computing the link M/N. The limits and mode_valid are evaluated before that, so divide the pixel clock by the link count there as well, otherwise the check would be too strict by that factor. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

Note: MST goes through intel_dp_compute_config_limits() as well, so its compute config is already covered here. Only pruning the modes in the MST mode_valid is left, which is added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville)
-Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction.
v3:
-Rebase on the link caps iterator based link config selection. -Set the constraint up in intel_dp_compute_config_limits() by narrowing the link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre)
-Use a limit of 4 on DG2. (Wa_14014191401)
-Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case for it. v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko) v5:
-Drop "SST" from the subject and fix the note, MST compute is already covered by the shared limits, only the MST mode_valid is left. (Mitul) -Add the Bspec reference. (Mitul)
-Drop the link_n check, compute_m_n() fixes N at 0x80000 and only halves it, so it cannot be 0. (Mitul)
-Fold in the MSO adjusted pixel clock from the M/N ratio check commit, so this commit is correct on its own. (Mitul)
-Add intel_dp_link_m_n_ratio(), so that the M/N ratio check can share it. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 114 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 120 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +2 -2
index 580c36a52921..f74e7ddf0e41 100644
@@ -2650,8 +2650,8 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
 		    pixel_clock, link_symbol_clock,
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index eecafff167d3..404168f4213b 100644
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display *display, enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 
 #endif
drivers/gpu/drm/i915/display/intel_dp.c +114 -0

150 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dp.h +2 -0
index 04fae203bb69..aa58833a405b 100644
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,
 
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
+
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
Signature · 1 line
2.34.1
#49 lore raw

PATCH v5 3/11 drm/i915/display_wa: Add support for Wa_14014191401

In reply to Suraj Kandpal

The DG2 transcoder timing generator DDA only supports a Link M/N ratio of up to 4. The Link M/N ratio limit uses a bare platform check for it.

Add Wa_14014191401 for DG2 and use it for the limit instead.

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 2 ++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c         | 3 ++-
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_wa.c +2 -0
index 2e3ff4861ef4..91395076e903 100644
@@ -94,6 +94,8 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 			IS_DISPLAY_STEP(display, STEP_A0, STEP_A2);
 	case INTEL_DISPLAY_WA_14014143976:
 		return IS_DISPLAY_STEP(display, STEP_E0, STEP_FOREVER);
+	case INTEL_DISPLAY_WA_14014191401:
+		return display->platform.dg2;
 	case INTEL_DISPLAY_WA_14016740474:
 		return IS_DISPLAY_VERx100_STEP(display, 1400, STEP_A0, STEP_C0);
 	case INTEL_DISPLAY_WA_14020863754:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index b707147a7587..f41e58d1d6e7 100644
@@ -31,6 +31,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14011508470,
 	INTEL_DISPLAY_WA_14011765242,
 	INTEL_DISPLAY_WA_14014143976,
+	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
 	INTEL_DISPLAY_WA_14025769978,
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
index 7ceb7c02b597..f3a79ae49b18 100644
@@ -70,6 +70,7 @@
 #include "intel_display_regs.h"
 #include "intel_display_rpm.h"
 #include "intel_display_types.h"
+#include "intel_display_wa.h"
 #include "intel_dp.h"
 #include "intel_dp_aux.h"
 #include "intel_dp_hdcp.h"
@@ -1271,7 +1272,7 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
-	if (display->platform.dg2)
+	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
 	return 10;
Signature · 1 line
2.34.1
#50 lore raw

PATCH v5 4/11 drm/i915/dp_mst: Limit M/N ratio for MST

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link rate.

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration.
v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +5 -0
index 7023619aaaba..f00edfb66a10 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}
+
 	/*
 	 * TODO:
 	 * - Also check if compression would allow for the mode
Signature · 1 line
2.34.1
#51 lore raw

PATCH v5 5/11 drm/i915/dp: Add M/N ratio check for DP link config

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous commits only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on every iteration.

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre)
-Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it. (Sashiko)
v4:
-Move the MSO adjusted pixel clock to the commit adding the prediction, so that one is correct on its own. (Mitul)
-Reuse intel_dp_link_m_n_ratio() instead of open coding the ratio. (Mitul)
-Drop the m_n and link_n checks, neither can be NULL or 0. Make the parameters const and move it next to intel_dp_can_support_m_n(). (Mitul)
-Drop the check on dp_m2_n2, the dp_m_n one already covers it. (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 17 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 ++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 23 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +17 -0
index f3a79ae49b18..8ef6b4c4fc8e 100644
@@ -1299,6 +1299,21 @@ intel_dp_can_support_m_n(struct intel_display *display,
 	return m_n_ratio <= max_m_n_ratio;
 }
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+
+	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
+
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}
+
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
 {
 	if (!intel_dp->mso_link_count)
@@ -3755,6 +3770,8 @@ intel_dp_compute_config(struct intel_atomic_state *state,
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m_n);
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state);
drivers/gpu/drm/i915/display/intel_dp.h +4 -0
index aa58833a405b..1e3da678c9b6 100644
@@ -26,6 +26,7 @@ struct intel_display;
 struct intel_dp;
 struct intel_dp_link_config;
 struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter;
@@ -244,4 +245,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
index f00edfb66a10..8db84975f36b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);
 	else
Signature · 1 line
2.34.1
#52 lore raw

PATCH v5 6/11 drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

LINK_N register has bits 31:24 for extended link N value used for HDMI2.1 and for an alternate mode of operation of DP TG DDA.

Add support for these extra bits.

For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK (bits 31:24) is used to handle the extended link N bits. For older platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the standard link N bits. This distinction ensures clarity and maintains the semantics for platforms that support the extended bits. In subsequent changes the logic is updated to conditionally apply the extended link N bits.

v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
v5: Drop a stale changelog entry, the DISPLAY_VER split here is
intentional. (Sashiko)

Bspec: 50488

---
 drivers/gpu/drm/i915/display/intel_display.c   | 18 ++++++++++++++++--
 .../gpu/drm/i915/display/intel_display_regs.h  |  2 ++
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -2
index f74e7ddf0e41..461b81bf8341 100644
@@ -2720,14 +2720,22 @@ void intel_set_m_n(struct intel_display *display,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
+	u32 link_n = m_n->link_n;
+
 	intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m);
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
+
+	if (DISPLAY_VER(display) >= 14)
+		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		link_n &= DATA_LINK_M_N_MASK;
+
 	/*
 	 * On BDW+ writing LINK_N arms the double buffered update
 	 * of all the M/N registers, so it must be written last.
 	 */
-	intel_de_write(display, link_n_reg, m_n->link_n);
+	intel_de_write(display, link_n_reg, link_n);
 }
 
 bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
@@ -3484,7 +3492,13 @@ void intel_get_m_n(struct intel_display *display,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
 	m_n->link_m = intel_de_read(display, link_m_reg) & DATA_LINK_M_N_MASK;
-	m_n->link_n = intel_de_read(display, link_n_reg) & DATA_LINK_M_N_MASK;
+	m_n->link_n = intel_de_read(display, link_n_reg);
+
+	if (DISPLAY_VER(display) >= 14)
+		m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		m_n->link_n &= DATA_LINK_M_N_MASK;
+
 	m_n->data_m = intel_de_read(display, data_m_reg) & DATA_LINK_M_N_MASK;
 	m_n->data_n = intel_de_read(display, data_n_reg) & DATA_LINK_M_N_MASK;
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
drivers/gpu/drm/i915/display/intel_display_regs.h +2 -0
index 2f509bd06557..983a0d9dcb9c 100644
@@ -1190,6 +1190,8 @@
 
 #define _PIPEA_LINK_N1		0x60044
 #define _PIPEB_LINK_N1		0x61044
+#define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
+#define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
Signature · 1 line
2.34.1
#53 lore raw

PATCH v5 7/11 drm/i915/display_wa: Add support for Wa_14021768792

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Some BMG ultrajoiner configurations require support for Link M/N ratios between 10.0 and 15.0. This range is not natively supported and requires a workaround.

Wa_14021768792 enables this support by utilizing HDMI_EMP_DATA, CHICKEN_TRANS and the extended bits in the LINK_N register.

Add the necessary logic to enable the workaround on applicable platforms. The underlying mechanism comes from the display C0,
so it is gated on display stepping C0 and later.

v2:
-Don't include i915_drv.h and don't use struct drm_i915_private under display/. Use display->platform.battlemage, which names the affected platform directly, instead of IS_DGFX() combined with a display version check. (Jani)
-Rebase on the reworked display WA framework, where the condition goes directly into the __intel_display_wa() switch.

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 9 +++++++++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display_wa.c +9 -0
index 91395076e903..e6f84dffdeb7 100644
@@ -102,6 +102,15 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 		return DISPLAY_VERx100(display) == 3000 ||
 			DISPLAY_VERx100(display) == 2000 ||
 			DISPLAY_VERx100(display) == 1401;
+	/*
+	 * Wa_14021768792:
+	 * Fixes: Limitation of Link M/N ratio > 10 for specific Xe2HPD platforms.
+	 * Workaround: Use HDMI_EMP_DATA, CHICKEN_BITs and extended bits in LINK_N
+	 * registers to support LINK M/N ratios from > 10 but < 15.
+	 */
+	case INTEL_DISPLAY_WA_14021768792:
+		return display->platform.battlemage &&
+			IS_DISPLAY_STEP(display, STEP_C0, STEP_FOREVER);
 	case INTEL_DISPLAY_WA_14025769978:
 		return DISPLAY_VER(display) == 35;
 	case INTEL_DISPLAY_WA_14026643300:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index f41e58d1d6e7..0b43c2144dcc 100644
@@ -34,6 +34,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
+	INTEL_DISPLAY_WA_14021768792,
 	INTEL_DISPLAY_WA_14025769978,
 	INTEL_DISPLAY_WA_14026643300,
 	INTEL_DISPLAY_WA_15013987218,
Signature · 1 line
2.34.1
#54 lore raw

PATCH v5 8/11 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n structure.

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

The workaround is limited to transcoder A. Check the transcoder rather than the pipe: for a single pipe the two are the same, but the joiner secondaries read the M/N back through the primary's transcoder, so a pipe check would have them report the workaround as not applied while their state, copied from the primary, has it applied.

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N, since writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is enabled. Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied or not.

Unlike the rest of the M/N registers, CHICKEN_TRANS and HDMI_EMP_DATA are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in intel_get_m_n():
it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)
v3:
-Check for transcoder A instead of pipe A, so that the joiner secondaries read the flag back the same as the primary. (Mitul)
-Drop bypass_m_n_ratio_limit from intel_compare_link_m_n(), the unconditional PIPE_CONF_CHECK_BOOL() already compares it. (Mitul) -Print bypass_m_n_ratio_limit in the crtc state dump. (Mitul)

Bspec: 49266

---
 .../drm/i915/display/intel_crtc_state_dump.c  |  6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 82 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |  2 +
 .../gpu/drm/i915/display/intel_display_regs.h | 10 +++
 .../drm/i915/display/intel_display_types.h    |  2 +
 5 files changed, 99 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_crtc_state_dump.c +4 -2
index 92675a88b969..c51b21222dc6 100644
@@ -36,10 +36,12 @@ intel_dump_m_n_config(struct drm_printer *p,
 		      const char *id, unsigned int lane_count,
 		      const struct intel_link_m_n *m_n)
 {
-	drm_printf(p, "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+	drm_printf(p,
+		   "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u, bypass_m_n_ratio_limit: %s\n",
 		   id, lane_count,
 		   m_n->data_m, m_n->data_n,
-		   m_n->link_m, m_n->link_n, m_n->tu);
+		   m_n->link_m, m_n->link_n, m_n->tu,
+		   str_yes_no(m_n->bypass_m_n_ratio_limit));
 }
 
 static void
drivers/gpu/drm/i915/display/intel_display.c +81 -1

124 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display.h +2 -0
index 404168f4213b..d53b7b4a80e7 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
 void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum transcoder transcoder);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +10 -0
index 983a0d9dcb9c..bbdbc27629d7 100644
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv, (trans), _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display), (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)		_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)
 #define   PORTB_HOTPLUG_INT_EN			(1 << 29)
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 8f9fb2603638..d0748837ce97 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
Signature · 1 line
2.34.1
#55 lore raw

PATCH v5 9/11 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot leave it set for the rate that gets used. (Sashiko)
v3:
-Rebase on the reworked M/N ratio check, which no longer checks m_n and link_n. m_n is no longer const, as the flag is set through it. (Mitul) -Pass the cpu transcoder to intel_display_can_bypass_m_n_limit() instead of the pipe. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 28 ++++++++++++++++++++-----
 drivers/gpu/drm/i915/display/intel_dp.h |  2 +-
 2 files changed, 24 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +23 -5
index 8ef6b4c4fc8e..8e6ba5b9fde6 100644
@@ -1300,18 +1300,32 @@ intel_dp_can_support_m_n(struct intel_display *display,
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n)
+			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
 	int m_n_ratio;
 
+	m_n->bypass_m_n_ratio_limit = false;
+
 	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio,
+					       crtc_state->cpu_transcoder)) {
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }
 
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
@@ -3393,6 +3407,9 @@ static bool can_enable_drrs(struct intel_connector *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR
 	 * as it allows more power-savings by complete shutting down display,
@@ -3427,7 +3444,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 
 	if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
drivers/gpu/drm/i915/display/intel_dp.h +1 -1
index 1e3da678c9b6..c834d90a1f81 100644
@@ -246,6 +246,6 @@ int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n);
+			      struct intel_link_m_n *m_n);
 
 #endif /* __INTEL_DP_H__ */
Signature · 1 line
2.34.1
#56 lore raw

PATCH v5 10/11 drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

On BMG platforms, the standard M/N ratio limit of 10 can be bypassed under specific conditions, as permitted by hardware capabilities.

Modify the helper intel_dp_can_support_m_n() to account for this by checking whether the platform supports bypassing the limit. The workaround is only intended for 128b/132b links, so restrict it to those.

During the mode_valid phase, the check assumes that TRANSCODER_A will be used, to allow the mode where the M/N ratio is within the limits for the workaround.

v2:
-Keep the helper static: the MST mode_valid now goes through the shared intel_dp_mode_valid_m_n() rather than calling it directly, so it no longer needs to be exported.
v3:
-Use the cpu transcoder instead of the pipe, following the change to intel_display_can_bypass_m_n_limit(). (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +15 -3
index 8e6ba5b9fde6..045524994d85 100644
@@ -1285,9 +1285,11 @@ static int intel_dp_link_m_n_ratio(u32 link_m, u32 link_n)
 
 static bool
 intel_dp_can_support_m_n(struct intel_display *display,
+			 const struct intel_crtc_state *crtc_state,
 			 int pixel_clock, int link_rate)
 {
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	enum transcoder cpu_transcoder = TRANSCODER_A;
 	u32 link_m, link_n;
 	int m_n_ratio;
 
@@ -1296,7 +1298,16 @@ intel_dp_can_support_m_n(struct intel_display *display,
 
 	m_n_ratio = intel_dp_link_m_n_ratio(link_m, link_n);
 
-	return m_n_ratio <= max_m_n_ratio;
+	if (m_n_ratio <= max_m_n_ratio)
+		return true;
+
+	if (!drm_dp_is_uhbr_rate(link_rate))
+		return false;
+
+	if (crtc_state)
+		cpu_transcoder = crtc_state->cpu_transcoder;
+
+	return intel_display_can_bypass_m_n_limit(display, m_n_ratio, cpu_transcoder);
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
@@ -1386,7 +1397,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+		if (intel_dp_can_support_m_n(display, NULL, m_n_pixel_clock,
 					     link_config.rate)) {
 			found = true;
 
@@ -2775,7 +2786,8 @@ intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
 
 	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits->link_config_filter);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (!intel_dp_can_support_m_n(display, pixel_clock, link_config.rate))
+		if (!intel_dp_can_support_m_n(display, crtc_state, pixel_clock,
+					      link_config.rate))
 			continue;
 
 		intel_dp_link_caps_filter_add(link_caps, &new_filter, &link_config);
Signature · 1 line
2.34.1
#57 lore raw

PATCH v5 11/11 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

In reply to Suraj Kandpal

Starting Xe3p max M/N ratio has been increased to 22.

Bspec: 68922

---
 drivers/gpu/drm/i915/display/intel_dp.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index 045524994d85..5864e33456a7 100644
@@ -1272,6 +1272,9 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
+	if (DISPLAY_VER(display) >= 35)
+		return 22;
+
 	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
Signature · 1 line
2.34.1
#58 lore raw

✗ Fi.CI.BUILD: failure for Implement Wa_14021768792 to bypass m_n ratio limit (rev9)

In reply to Suraj Kandpal
== Series Details ==

== Series Details ==

Series: Implement Wa_14021768792 to bypass m_n ratio limit (rev9)
URL : https://patchwork.freedesktop.org/series/138257/
State : failure

== Summary ==

Error: patch https://patchwork.freedesktop.org/api/1.0/series/138257/revisions/9/mbox/ not applied
Applying: drm/i915/display: Add helper to compute link M/N ratio for reuse
Applying: drm/i915/dp: Limit M/N ratio for DP SST
Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/display/intel_display.c
M drivers/gpu/drm/i915/display/intel_dp.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/display/intel_dp.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_dp.c Auto-merging drivers/gpu/drm/i915/display/intel_display.c
error: Failed to merge in the changes.
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Patch failed at 0002 drm/i915/dp: Limit M/N ratio for DP SST
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
Build failed, no error log produced

#59 lore raw

v6 cover Implement Wa_14021768792 to bypass m_n ratio limit

In reply to Suraj Kandpal

For Platforms that support higher link rates, there is a limitation on Link M /Link N ratio.
If the CEILING( Link M / Link N ) ratio is greater than 10.0, then hardware cannot support the given resolution / refresh rate at the given configuration.
For BMG Wa_14021768792 helps to bypass this limitation and allows it to support the ratio till 15.0.

This series adds the missing restrictions for earlier platforms and adds the Wa_14021768792 for BMG as per Bspec:49266

Ankit Nautiyal (8):
drm/i915/display: Add helper to compute link M/N ratio for reuse drm/i915/dp_mst: Limit M/N ratio for MST
drm/i915/dp: Add M/N ratio check for DP link config drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14 drm/i915/display_wa: Add support for Wa_14021768792 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n

    ratio > 10

drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

Suraj Kandpal (3):
drm/i915/dp: Limit M/N ratio for DP
drm/i915/display_wa: Add support for Wa_14014191401 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

 .../drm/i915/display/intel_crtc_state_dump.c  |   6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 113 +++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |   4 +
 .../gpu/drm/i915/display/intel_display_regs.h |  12 ++
 .../drm/i915/display/intel_display_types.h    |   2 +
 .../gpu/drm/i915/display/intel_display_wa.c   |  11 ++
 .../gpu/drm/i915/display/intel_display_wa.h   |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c       | 167 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_dp.h       |   6 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |   7 +
 10 files changed, 321 insertions(+), 9 deletions(-)
Signature · 1 line
2.34.1
#60 lore raw

PATCH v6 1/11 drm/i915/display: Add helper to compute link M/N ratio for reuse

From: Ankit Nautiyal <[email protected]>

Introduce intel_display_compute_link_m_n() to compute the link M/N ratio from the pixel clock and the link symbol clock. This logic was previously embedded within intel_link_compute_m_n().
The new helper allows reuse of link M/N computation in other contexts without requiring the full data M/N calculation and will be used in later commits.

No functional changes intended.

v2:
- Rename function (Jani)
- The link symbol clock is passed in rather than derived here, so that the DP specific conversion from the link rate stays with the caller. (Jani)

---
 drivers/gpu/drm/i915/display/intel_display.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +11 -4
index 7602f633f49d..580c36a52921 100644
@@ -2650,13 +2650,20 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
+static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+					   int pixel_clock, int link_symbol_clock)
+{
+	compute_m_n(link_m, link_n,
+		    pixel_clock, link_symbol_clock,
+		    0x80000);
+}
+
 void
 intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		       int pixel_clock, int link_clock,
 		       int bw_overhead,
 		       struct intel_link_m_n *m_n)
 {
-	u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock);
 	u32 data_m = intel_dp_effective_data_rate(pixel_clock, bits_per_pixel_x16,
 						  bw_overhead);
 	u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes);
@@ -2673,9 +2680,9 @@ intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes,
 		    data_m, data_n,
 		    0x8000000);
 
-	compute_m_n(&m_n->link_m, &m_n->link_n,
-		    pixel_clock, link_symbol_clock,
-		    0x80000);
+	intel_display_compute_link_m_n(&m_n->link_m, &m_n->link_n,
+				       pixel_clock,
+				       intel_dp_link_symbol_clock(link_clock));
 }
 
 void intel_panel_sanitize_ssc(struct intel_display *display)
Signature · 1 line
2.34.1
#61 lore raw

PATCH v6 2/11 drm/i915/dp: Limit M/N ratio for DP

In reply to Suraj Kandpal

The hardware cannot support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit the transcoder's timing generator DDA can track. This limitation has always existed, but it typically wasn't encountered without the use of joiners and DSC. With higher resolutions and combinations involving joiners and DSC, this constraint can now be hit in certain scenarios.

Restrict the link configurations to those satisfying the constraint while computing the link config limits, so that the SST and the MST paths both get it, and so that a mode which no link rate can support fails early rather than deep inside link config selection.

Also prune such modes in mode_valid. Note the ratio is the pixel clock over the link symbol clock, and the symbol clock is not monotonic in the link rate: it is the rate divided by 32 for 128b/132b but only by 10 for 8b/10b, so e.g. HBR3 has a higher symbol clock than UHBR20. There is therefore no single best link rate to evaluate against, and mode_valid walks the link configurations instead, only rejecting the mode if none of them can satisfy the ratio.

For MSO, intel_dp_compute_config() divides adjusted_mode->crtc_clock by the MSO link count before computing the link M/N. The limits and mode_valid are evaluated before that, so divide the pixel clock by the link count there as well, otherwise the check would be too strict by that factor. The joiner needs no such handling, as intel_joiner_adjust_timings() only rewrites the pipe mode and leaves the adjusted mode the link M/N is derived from untouched.

Note: MST goes through intel_dp_compute_config_limits() as well, so its compute config is already covered here. Only pruning the modes in the MST mode_valid is left, which is added in a subsequent commit.

v2:
-Move the M/N ratio check to the link rate configuration phase instead of during M/N computation. (Ville)
-Prune modes that cannot be supported even with highest link rate due to M/N ratio restriction.
v3:
-Rebase on the link caps iterator based link config selection. -Set the constraint up in intel_dp_compute_config_limits() by narrowing the link config filter, and fail there if no config qualifies, instead of skipping configs while iterating them. (Imre)
-Use a limit of 4 on DG2. (Wa_14014191401)
-Walk the link configurations in mode_valid rather than evaluating the ratio at the highest link rate, which is not the best case for it. v4:
-Add iterator for all dp configs in intel_dp_mode_valid_m_n() so that we do not prune any mode that could have been supported (Sashiko) v5:
-Drop "SST" from the subject and fix the note, MST compute is already covered by the shared limits, only the MST mode_valid is left. (Mitul) -Add the Bspec reference. (Mitul)
-Drop the link_n check, compute_m_n() fixes N at 0x80000 and only halves it, so it cannot be 0. (Mitul)
-Fold in the MSO adjusted pixel clock from the M/N ratio check commit, so this commit is correct on its own. (Mitul)
-Add intel_dp_link_m_n_ratio(), so that the M/N ratio check can share it. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display.c |   4 +-
 drivers/gpu/drm/i915/display/intel_display.h |   2 +
 drivers/gpu/drm/i915/display/intel_dp.c      | 114 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h      |   2 +
 4 files changed, 120 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +2 -2
index 580c36a52921..f74e7ddf0e41 100644
@@ -2650,8 +2650,8 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
 	intel_reduce_m_n_ratio(ret_m, ret_n);
 }
 
-static void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
-					   int pixel_clock, int link_symbol_clock)
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock)
 {
 	compute_m_n(link_m, link_n,
 		    pixel_clock, link_symbol_clock,
drivers/gpu/drm/i915/display/intel_display.h +2 -0
index eecafff167d3..404168f4213b 100644
@@ -523,5 +523,7 @@ bool assert_port_valid(struct intel_display *display, enum port port);
 
 bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
+void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
+				    int pixel_clock, int link_symbol_clock);
 
 #endif
drivers/gpu/drm/i915/display/intel_dp.c +114 -0

150 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dp.h +2 -0
index 04fae203bb69..aa58833a405b 100644
@@ -239,6 +239,8 @@ bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,
 
 u8 intel_dp_as_sdp_transmission_time(void);
 
+bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
+
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
Signature · 1 line
2.34.1
#62 lore raw

PATCH v6 3/11 drm/i915/display_wa: Add support for Wa_14014191401

In reply to Suraj Kandpal

The DG2 transcoder timing generator DDA only supports a Link M/N ratio of up to 4. The Link M/N ratio limit uses a bare platform check for it.

Add Wa_14014191401 for DG2 and use it for the limit instead.

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 2 ++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c         | 3 ++-
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_wa.c +2 -0
index 2e3ff4861ef4..91395076e903 100644
@@ -94,6 +94,8 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 			IS_DISPLAY_STEP(display, STEP_A0, STEP_A2);
 	case INTEL_DISPLAY_WA_14014143976:
 		return IS_DISPLAY_STEP(display, STEP_E0, STEP_FOREVER);
+	case INTEL_DISPLAY_WA_14014191401:
+		return display->platform.dg2;
 	case INTEL_DISPLAY_WA_14016740474:
 		return IS_DISPLAY_VERx100_STEP(display, 1400, STEP_A0, STEP_C0);
 	case INTEL_DISPLAY_WA_14020863754:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index b707147a7587..f41e58d1d6e7 100644
@@ -31,6 +31,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14011508470,
 	INTEL_DISPLAY_WA_14011765242,
 	INTEL_DISPLAY_WA_14014143976,
+	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
 	INTEL_DISPLAY_WA_14025769978,
drivers/gpu/drm/i915/display/intel_dp.c +2 -1
index 7ceb7c02b597..f3a79ae49b18 100644
@@ -70,6 +70,7 @@
 #include "intel_display_regs.h"
 #include "intel_display_rpm.h"
 #include "intel_display_types.h"
+#include "intel_display_wa.h"
 #include "intel_dp.h"
 #include "intel_dp_aux.h"
 #include "intel_dp_hdcp.h"
@@ -1271,7 +1272,7 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
-	if (display->platform.dg2)
+	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
 	return 10;
Signature · 1 line
2.34.1
Reviewed-by on v6 3/11
#63 lore raw

RE: [PATCH v6 03/11] drm/i915/display_wa: Add support for Wa_14014191401

I think the patch order may need to be adjusted: swap this patch with patch 2 and move the current patch 2 to position 3.

Quoted 64 lines

-----Original Message-----
From: Kandpal, Suraj <[email protected]>
Sent: 21 October 2026 12:44
To: [email protected]; [email protected]
Cc: Golani, Mitulkumar Ajitkumar <[email protected]>; Kandpal, Suraj <[email protected]>
Subject: [PATCH v6 03/11] drm/i915/display_wa: Add support for Wa_14014191401

The DG2 transcoder timing generator DDA only supports a Link M/N ratio of up to 4. The Link M/N ratio limit uses a bare platform check for it.

Add Wa_14014191401 for DG2 and use it for the limit instead.

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 2 ++
drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c         | 3 ++-
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_wa.c +2 -0
index 2e3ff4861ef4..91395076e903 100644
@@ -94,6 +94,8 @@ bool __intel_display_wa(struct intel_display *display,
 enum intel_display_wa wa,
 			IS_DISPLAY_STEP(display, STEP_A0, STEP_A2);
 	case INTEL_DISPLAY_WA_14014143976:
 		return IS_DISPLAY_STEP(display, STEP_E0, STEP_FOREVER);
+	case INTEL_DISPLAY_WA_14014191401:
+		return display->platform.dg2;
 	case INTEL_DISPLAY_WA_14016740474:
 		return IS_DISPLAY_VERx100_STEP(display, 1400, STEP_A0,

STEP_C0);

drivers/gpu/drm/i915/display/intel_display_wa.c +0 -0
 	case INTEL_DISPLAY_WA_14020863754:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index b707147a7587..f41e58d1d6e7 100644
@@ -31,6 +31,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14011508470,
 	INTEL_DISPLAY_WA_14011765242,
 	INTEL_DISPLAY_WA_14014143976,
+	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
 	INTEL_DISPLAY_WA_14025769978,
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
index 7ceb7c02b597..f3a79ae49b18 100644
@@ -70,6 +70,7 @@
 #include "intel_display_regs.h"
 #include "intel_display_rpm.h"
 #include "intel_display_types.h"
+#include "intel_display_wa.h"
 #include "intel_dp.h"
 #include "intel_dp_aux.h"
 #include "intel_dp_hdcp.h"

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector · line 1274

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
@@ -1271,7 +1272,7 @@ bool intel_dp_has_dsc(const struct intel_connector
 *connector)  static int  intel_dp_get_max_m_n_ratio(struct intel_display
 *display)  {
-	if (display->platform.dg2)
+	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))

With above suggested change is done,
LGTM

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp.c +0 -1
 		return 4;
 
 	return 10;
--

2.34.1

#64 lore raw

RE: [PATCH v6 03/11] drm/i915/display_wa: Add support for Wa_14014191401

Quoted 2 lines

I think the patch order may need to be adjusted: swap this patch with patch 2 and move the current patch 2 to position 3.

The patch ordering cannot be changed because the function in which if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
was called was introduced in patch 2, hence the patch 2 needs to comes first

Regards,
Suraj Kandpal

Quoted 82 lines
Quoted 29 lines

-----Original Message-----
From: Kandpal, Suraj <[email protected]>
Sent: 21 October 2026 12:44
To: [email protected]; [email protected]
Cc: Golani, Mitulkumar Ajitkumar <[email protected]>;
Kandpal, Suraj <[email protected]>
Subject: [PATCH v6 03/11] drm/i915/display_wa: Add support for Wa_14014191401

The DG2 transcoder timing generator DDA only supports a Link M/N ratio of up to 4. The Link M/N ratio limit uses a bare platform check for it.

Add Wa_14014191401 for DG2 and use it for the limit instead.

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 2 ++
drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c         | 3 ++-
 3 files changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_wa.c +0 -0
index 2e3ff4861ef4..91395076e903 100644

drivers/gpu/drm/i915/display/intel_display_wa.c bool __intel_display_wa(struct intel_display · line 101

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display_wa.c +2 -0
@@ -94,6 +94,8 @@ bool __intel_display_wa(struct intel_display
 *display, enum intel_display_wa wa,
 			IS_DISPLAY_STEP(display, STEP_A0, STEP_A2);
 	case INTEL_DISPLAY_WA_14014143976:
 		return IS_DISPLAY_STEP(display, STEP_E0, STEP_FOREVER);
+	case INTEL_DISPLAY_WA_14014191401:
+		return display->platform.dg2;
 	case INTEL_DISPLAY_WA_14016740474:
 		return IS_DISPLAY_VERx100_STEP(display, 1400, STEP_A0,

STEP_C0);

Quoted 32 lines
drivers/gpu/drm/i915/display/intel_display_wa.c +0 -0
 	case INTEL_DISPLAY_WA_14020863754:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index b707147a7587..f41e58d1d6e7 100644
@@ -31,6 +31,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14011508470,
 	INTEL_DISPLAY_WA_14011765242,
 	INTEL_DISPLAY_WA_14014143976,
+	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
 	INTEL_DISPLAY_WA_14025769978,
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
index 7ceb7c02b597..f3a79ae49b18 100644
@@ -70,6 +70,7 @@
 #include "intel_display_regs.h"
 #include "intel_display_rpm.h"
 #include "intel_display_types.h"
+#include "intel_display_wa.h"
 #include "intel_dp.h"
 #include "intel_dp_aux.h"
 #include "intel_dp_hdcp.h"
@@ -1271,7 +1272,7 @@ bool intel_dp_has_dsc(const struct

intel_connector
*connector) static int intel_dp_get_max_m_n_ratio(struct intel_display
*display) {

drivers/gpu/drm/i915/display/intel_dp.c bool intel_dp_has_dsc(const struct intel_connector *connector) · line 1275

Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
-	if (display->platform.dg2)
+	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))

With above suggested change is done,
LGTM

Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp.c +0 -1
 		return 4;
 
 	return 10;
--

2.34.1

#65 lore raw

PATCH v6 4/11 drm/i915/dp_mst: Limit M/N ratio for MST

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

The hardware does not support DisplayPort configurations where the ceiling of the Link M/Link N ratio exceeds the limit. Enforce this constraint for MST as well.

The compute config path needs no change: MST goes through intel_dp_compute_config_limits() too, so the link config filter set up there already excludes the configurations violating the ratio limit, and MST fails there if none is left.

What is still missing is pruning such modes, so add the check to mst_connector_mode_valid_ctx(), reusing the helper the SST mode_valid uses. It walks the link configurations and only rejects the mode if none of them can satisfy the ratio, rather than evaluating it at a single link rate.

v2:
-Drop the checks in the MST link config helpers, redundant now that the constraint is applied while computing the link config limits. (Imre) -Share the mode_valid helper with SST instead of evaluating the ratio at one link rate, since the link symbol clock is not monotonic in the link rate and there is no single best case configuration.
v3:
-Now that intel_dp_mode_valid_m_n checks for all configs just call that (Sashiko)

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +5 -0
index 7023619aaaba..f00edfb66a10 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 					   min_link_bpp_x16,
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}
+
 	/*
 	 * TODO:
 	 * - Also check if compression would allow for the mode
Signature · 1 line
2.34.1
#66 lore raw

Re: [PATCH v6 04/11] drm/i915/dp_mst: Limit M/N ratio for MST

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] drm/i915/dp_mst: M/N mode_valid and compute_config_limits filter mismatch --

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] drm/i915/dp_mst: M/N mode_valid and compute_config_limits filter mismatch --

commit 5b89059b3b94b9fbcca8f03ce951374211a9cdbc
Author: Ankit Nautiyal <[email protected]>

drm/i915/dp_mst: Limit M/N ratio for MST

This commit adds a Link M/N ratio check to mst_connector_mode_valid_ctx() using intel_dp_mode_valid_m_n() to prune modes whose pixel clock exceeds the hardware Link M/N ratio limit across all link configurations.

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +0 -0
index 7023619aaaba9..f00edfb66a10a 100644
@@ -1565,6 +1565,11 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 					   min_link_bpp_x16,

drivers/gpu/drm/i915/display/intel_dp_mst.c mst_connector_mode_valid_ctx(struct drm_connector *_connector, · line 1575

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +5 -0
 					   bw_overhead_flags);
 
+	if (!intel_dp_mode_valid_m_n(intel_dp, mode->clock)) {
+		*status = MODE_CLOCK_HIGH;
+		return 0;
+	}
+
 	/*
 	 * TODO:
 	 * - Also check if compression would allow for the mode

[Severity: Medium]
Could there be a mismatch here between how mst_connector_mode_valid_ctx() validates the M/N ratio and how intel_dp_compute_config_limits() filters link configurations for MST?

In drivers/gpu/drm/i915/display/intel_dp_mst.c, mst_connector_mode_valid_ctx() checks link bandwidth solely against max_bw_config, whereas intel_dp_mode_valid_m_n() iterates over all link configurations in INTEL_DP_LINK_CAPS_FILTER_ALL:

drivers/gpu/drm/i915/display/intel_dp.c:intel_dp_mode_valid_m_n() {
	...
	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
				      INTEL_DP_LINK_CAPS_FILTER_ALL);
	for_each_dp_link_config(&iter, &link_config) {
		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
					     link_config.rate)) {
			found = true;

			break;
		}
	}
	...
}

However, during modeset via mst_stream_compute_config() -> mst_stream_compute_link_for_joined_pipes() -> mst_stream_compute_config_limits() -> intel_dp_compute_config_limits() in drivers/gpu/drm/i915/display/intel_dp.c, the MST path narrows limits->link_config_filter to the single unfiltered max_config before calling intel_dp_compute_m_n_ratio_limits():

drivers/gpu/drm/i915/display/intel_dp.c:intel_dp_compute_config_limits() {
	...
	if (is_mst || intel_dp->use_max_params) {
		struct intel_dp_link_caps_filter new_filter = INTEL_DP_LINK_CAPS_FILTER_NONE;
		struct intel_dp_link_config max_config;
		...
		if (!intel_dp_get_connector_max_link_config(connector, limits, &max_config))
			return false;

		if (!intel_dp_link_caps_filter_add(link_caps, &new_filter, &max_config))
			return false;

		limits->link_config_filter = new_filter;
	}

	if (!intel_dp_compute_m_n_ratio_limits(intel_dp, conn_state, crtc_state, limits))
		return false;
	...
}

On a DP 2.x MST topology supporting both 128b/132b UHBR rates (where symbol clock is rate * 10 / 32, e.g. 312.5 MHz for UHBR10 or 421.875 MHz for UHBR13.5) and 8b/10b rates (where symbol clock is rate / 10, e.g. 810 MHz for HBR3), a high-pixel-clock mode can exceed the M/N ratio limit at max_bw_config (such as 4xUHBR10) while still passing intel_dp_can_support_m_n() at HBR3.

Wouldn't that allow mst_connector_mode_valid_ctx() to return MODE_OK for a mode that then fails atomic check in intel_dp_compute_config_limits() with -EINVAL because only max_config was retained in limits->link_config_filter? Should mst_connector_mode_valid_ctx() either check intel_dp_can_support_m_n() against max_link_clock, or should intel_dp_compute_m_n_ratio_limits() run before selecting max_config in intel_dp_compute_config_limits()?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=4
#67 lore raw

PATCH v6 5/11 drm/i915/dp: Add M/N ratio check for DP link config

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Introduce intel_dp_check_m_n_ratio() to validate the computed link M/N ratio against the maximum allowed value, and log it if the ratio exceeds the limit.

The link config limits computed in the previous commits only restrict the configurations that may be selected; this catches anything that still slips through.

Log it rather than warn about it: the link config filter already excludes the configurations violating the limit, so the only way to get here is with link parameters forced through debugfs, which are applied after that filter. A user triggerable drm_WARN() with its backtrace would be out of proportion for that.

For MST the check goes after the bpp loop rather than inside it. The link M/N is computed from the pixel clock and the link symbol clock, so it does not depend on the bpp being tried and the result is the same on every iteration.

v2:
-Use the platform specific ratio limit. (Wa_14014191401) -Use the MSO adjusted pixel clock when predicting the ratio, matching what the link M/N is actually computed from. (Imre)
-Drop the check from ilk_fdi_compute_config(): it was passing dp_m_n rather than the fdi_m_n it had just computed, and an FDI link cannot get anywhere near the ratio limit anyway.
v3:
-Check the ratio once after the MST bpp loop instead of on every iteration, the result does not depend on the bpp. (Sashiko) -Log instead of warning, since the link config filter already excludes these configurations and only forced link parameters can reach it. (Sashiko)
v4:
-Move the MSO adjusted pixel clock to the commit adding the prediction, so that one is correct on its own. (Mitul)
-Reuse intel_dp_link_m_n_ratio() instead of open coding the ratio. (Mitul)
-Drop the m_n and link_n checks, neither can be NULL or 0. Make the parameters const and move it next to intel_dp_can_support_m_n(). (Mitul)
-Drop the check on dp_m2_n2, the dp_m_n one already covers it. (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c     | 17 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h     |  4 ++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 ++
 3 files changed, 23 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +17 -0
index f3a79ae49b18..8ef6b4c4fc8e 100644
@@ -1299,6 +1299,21 @@ intel_dp_can_support_m_n(struct intel_display *display,
 	return m_n_ratio <= max_m_n_ratio;
 }
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n)
+{
+	struct intel_display *display = to_intel_display(crtc_state);
+	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	int m_n_ratio;
+
+	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
+
+	if (m_n_ratio > max_m_n_ratio)
+		drm_dbg_kms(display->drm,
+			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+			    m_n_ratio, max_m_n_ratio);
+}
+
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
 {
 	if (!intel_dp->mso_link_count)
@@ -3755,6 +3770,8 @@ intel_dp_compute_config(struct intel_atomic_state *state,
 				       pipe_config->port_clock,
 				       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
 				       &pipe_config->dp_m_n);
+
+		intel_dp_check_m_n_ratio(pipe_config, &pipe_config->dp_m_n);
 	}
 
 	ret = intel_dp_compute_min_hblank(pipe_config, conn_state);
drivers/gpu/drm/i915/display/intel_dp.h +4 -0
index aa58833a405b..1e3da678c9b6 100644
@@ -26,6 +26,7 @@ struct intel_display;
 struct intel_dp;
 struct intel_dp_link_config;
 struct intel_encoder;
+struct intel_link_m_n;
 
 struct link_config_limits {
 	struct intel_dp_link_caps_filter link_config_filter;
@@ -244,4 +245,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock);
 int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
+void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
+			      const struct intel_link_m_n *m_n);
+
 #endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +2 -0
index f00edfb66a10..8db84975f36b 100644
@@ -429,6 +429,8 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp *intel_dp,
 		return slots;
 	}
 
+	intel_dp_check_m_n_ratio(crtc_state, &crtc_state->dp_m_n);
+
 	if (!dsc)
 		crtc_state->pipe_bpp = fxp_q4_to_int(bpp_x16);
 	else
Signature · 1 line
2.34.1
#68 lore raw

PATCH v6 6/11 drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

LINK_N register has bits 31:24 for extended link N value used for HDMI2.1 and for an alternate mode of operation of DP TG DDA.

Add support for these extra bits.

For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK (bits 31:24) is used to handle the extended link N bits. For older platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the standard link N bits. This distinction ensures clarity and maintains the semantics for platforms that support the extended bits. In subsequent changes the logic is updated to conditionally apply the extended link N bits.

v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
v5: Drop a stale changelog entry, the DISPLAY_VER split here is
intentional. (Sashiko)

Bspec: 50488

---
 drivers/gpu/drm/i915/display/intel_display.c   | 18 ++++++++++++++++--
 .../gpu/drm/i915/display/intel_display_regs.h  |  2 ++
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -2
index f74e7ddf0e41..461b81bf8341 100644
@@ -2720,14 +2720,22 @@ void intel_set_m_n(struct intel_display *display,
 		   intel_reg_t data_m_reg, intel_reg_t data_n_reg,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
+	u32 link_n = m_n->link_n;
+
 	intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m);
 	intel_de_write(display, data_n_reg, m_n->data_n);
 	intel_de_write(display, link_m_reg, m_n->link_m);
+
+	if (DISPLAY_VER(display) >= 14)
+		link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		link_n &= DATA_LINK_M_N_MASK;
+
 	/*
 	 * On BDW+ writing LINK_N arms the double buffered update
 	 * of all the M/N registers, so it must be written last.
 	 */
-	intel_de_write(display, link_n_reg, m_n->link_n);
+	intel_de_write(display, link_n_reg, link_n);
 }
 
 bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
@@ -3484,7 +3492,13 @@ void intel_get_m_n(struct intel_display *display,
 		   intel_reg_t link_m_reg, intel_reg_t link_n_reg)
 {
 	m_n->link_m = intel_de_read(display, link_m_reg) & DATA_LINK_M_N_MASK;
-	m_n->link_n = intel_de_read(display, link_n_reg) & DATA_LINK_M_N_MASK;
+	m_n->link_n = intel_de_read(display, link_n_reg);
+
+	if (DISPLAY_VER(display) >= 14)
+		m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+	else
+		m_n->link_n &= DATA_LINK_M_N_MASK;
+
 	m_n->data_m = intel_de_read(display, data_m_reg) & DATA_LINK_M_N_MASK;
 	m_n->data_n = intel_de_read(display, data_n_reg) & DATA_LINK_M_N_MASK;
 	m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
drivers/gpu/drm/i915/display/intel_display_regs.h +2 -0
index 2f509bd06557..983a0d9dcb9c 100644
@@ -1190,6 +1190,8 @@
 
 #define _PIPEA_LINK_N1		0x60044
 #define _PIPEB_LINK_N1		0x61044
+#define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
+#define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
Signature · 1 line
2.34.1
#69 lore raw

PATCH v6 7/11 drm/i915/display_wa: Add support for Wa_14021768792

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Some BMG ultrajoiner configurations require support for Link M/N ratios between 10.0 and 15.0. This range is not natively supported and requires a workaround.

Wa_14021768792 enables this support by utilizing HDMI_EMP_DATA, CHICKEN_TRANS and the extended bits in the LINK_N register.

Add the necessary logic to enable the workaround on applicable platforms. The underlying mechanism comes from the display C0,
so it is gated on display stepping C0 and later.

v2:
-Don't include i915_drv.h and don't use struct drm_i915_private under display/. Use display->platform.battlemage, which names the affected platform directly, instead of IS_DGFX() combined with a display version check. (Jani)
-Rebase on the reworked display WA framework, where the condition goes directly into the __intel_display_wa() switch.

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_display_wa.c | 9 +++++++++
 drivers/gpu/drm/i915/display/intel_display_wa.h | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display_wa.c +9 -0
index 91395076e903..e6f84dffdeb7 100644
@@ -102,6 +102,15 @@ bool __intel_display_wa(struct intel_display *display, enum intel_display_wa wa,
 		return DISPLAY_VERx100(display) == 3000 ||
 			DISPLAY_VERx100(display) == 2000 ||
 			DISPLAY_VERx100(display) == 1401;
+	/*
+	 * Wa_14021768792:
+	 * Fixes: Limitation of Link M/N ratio > 10 for specific Xe2HPD platforms.
+	 * Workaround: Use HDMI_EMP_DATA, CHICKEN_BITs and extended bits in LINK_N
+	 * registers to support LINK M/N ratios from > 10 but < 15.
+	 */
+	case INTEL_DISPLAY_WA_14021768792:
+		return display->platform.battlemage &&
+			IS_DISPLAY_STEP(display, STEP_C0, STEP_FOREVER);
 	case INTEL_DISPLAY_WA_14025769978:
 		return DISPLAY_VER(display) == 35;
 	case INTEL_DISPLAY_WA_14026643300:
drivers/gpu/drm/i915/display/intel_display_wa.h +1 -0
index f41e58d1d6e7..0b43c2144dcc 100644
@@ -34,6 +34,7 @@ enum intel_display_wa {
 	INTEL_DISPLAY_WA_14014191401,
 	INTEL_DISPLAY_WA_14016740474,
 	INTEL_DISPLAY_WA_14020863754,
+	INTEL_DISPLAY_WA_14021768792,
 	INTEL_DISPLAY_WA_14025769978,
 	INTEL_DISPLAY_WA_14026643300,
 	INTEL_DISPLAY_WA_15013987218,
Signature · 1 line
2.34.1
#70 lore raw

PATCH v6 8/11 drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

To support a Link M/N ratio between 10.0 and 15.0, for some BMG ultrajoiner cases we need Wa_14021768792.

To bypass the hardware limitation within the Timing Generator DDA (TGDDA), we need to program the LINKM and LINKN registers as defined in the WA. Along with this we also need the relevant bits in HDMI_EMP_DATA and CHICKEN_TRANS.

Add the bits for the WA and a new member 'bypass_m_n_ratio_limit' to track if we need to bypass the Link M/N ratio limit in the intel_link_m_n structure.

Per Bspec the extended LINK_N field is two nibbles: bits 27:24 hold INT(Link M / Link N) and bits 31:28 hold CEIL(Link M / Link N).

The workaround is limited to transcoder A. Check the transcoder rather than the pipe: for a single pipe the two are the same, but the joiner secondaries read the M/N back through the primary's transcoder, so a pipe check would have them report the workaround as not applied while their state, copied from the primary, has it applied.

CHICKEN_TRANS and HDMI_EMP_DATA are programmed before LINK_N, since writing LINK_N arms the double buffered update of the M/N registers, and all of the programming has to be done before the transcoder is enabled. Both are also explicitly cleared when the mechanism is not in use, so that state cannot leak from a previous modeset.

Only bypass_m_n_ratio_limit is compared by the state checker, not the ratio integer and fraction themselves. That is deliberate: both are derived from Link M and Link N, which are compared already, so the thing worth verifying is whether the workaround ended up being applied or not.

Unlike the rest of the M/N registers, CHICKEN_TRANS and HDMI_EMP_DATA are not double buffered, so the flag has to be compared outside the fastset exemption that PIPE_CONF_CHECK_M_N() has for update_m_n. Otherwise a seamless M/N update could switch the DDA out of the workaround on a live transcoder, with the Link M/N values only following at the next MSA.

v2:
-Drop the drm_WARN_ON() on the extended LINK_N field in intel_get_m_n():
it is derived from Link M and Link N, so the state checker comparison of those and of bypass_m_n_ratio_limit already covers it. (Sashiko) -Compare bypass_m_n_ratio_limit unconditionally, so that a change to it forces a full modeset instead of being applied during a seamless M/N fastset. (Sashiko)
v3:
-Check for transcoder A instead of pipe A, so that the joiner secondaries read the flag back the same as the primary. (Mitul)
-Drop bypass_m_n_ratio_limit from intel_compare_link_m_n(), the unconditional PIPE_CONF_CHECK_BOOL() already compares it. (Mitul) -Print bypass_m_n_ratio_limit in the crtc state dump. (Mitul)

Bspec: 49266

---
 .../drm/i915/display/intel_crtc_state_dump.c  |  6 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 82 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h  |  2 +
 .../gpu/drm/i915/display/intel_display_regs.h | 10 +++
 .../drm/i915/display/intel_display_types.h    |  2 +
 5 files changed, 99 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_crtc_state_dump.c +4 -2
index 92675a88b969..c51b21222dc6 100644
@@ -36,10 +36,12 @@ intel_dump_m_n_config(struct drm_printer *p,
 		      const char *id, unsigned int lane_count,
 		      const struct intel_link_m_n *m_n)
 {
-	drm_printf(p, "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+	drm_printf(p,
+		   "%s: lanes: %i; data_m: %u, data_n: %u, link_m: %u, link_n: %u, tu: %u, bypass_m_n_ratio_limit: %s\n",
 		   id, lane_count,
 		   m_n->data_m, m_n->data_n,
-		   m_n->link_m, m_n->link_n, m_n->tu);
+		   m_n->link_m, m_n->link_n, m_n->tu,
+		   str_yes_no(m_n->bypass_m_n_ratio_limit));
 }
 
 static void
drivers/gpu/drm/i915/display/intel_display.c +81 -1

124 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display.h +2 -0
index 404168f4213b..d53b7b4a80e7 100644
@@ -525,5 +525,7 @@ bool intel_scanout_needs_vtd_wa(struct intel_display *display);
 int intel_crtc_num_joined_pipes(const struct intel_crtc_state *crtc_state);
 void intel_display_compute_link_m_n(u32 *link_m, u32 *link_n,
 				    int pixel_clock, int link_symbol_clock);
+bool intel_display_can_bypass_m_n_limit(struct intel_display *display,
+					int m_n_ratio, enum transcoder transcoder);
 
 #endif
drivers/gpu/drm/i915/display/intel_display_regs.h +10 -0
index 983a0d9dcb9c..bbdbc27629d7 100644
@@ -550,6 +550,11 @@
 #define _TRANS_MULT_B		0x6102c
 #define TRANS_MULT(dev_priv, trans)	_MMIO_TRANS2(dev_priv, (trans), _TRANS_MULT_A)
 
+#define _HDMI_EMP_DATA_A	0x600d8
+#define _HDMI_EMP_DATA_B	0x610d8
+#define  HDMI_EMP_DATA_LINK_M_FRAC_MASK	REG_GENMASK(23, 0)
+#define HDMI_EMP_DATA(display, trans)	_MMIO_TRANS2((display), (trans), _HDMI_EMP_DATA_A)
+
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN(dev_priv)		_MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110)
 #define   PORTB_HOTPLUG_INT_EN			(1 << 29)
@@ -1192,6 +1197,10 @@
 #define _PIPEB_LINK_N1		0x61044
 #define  PIPE_LINK_N1_EXTENDED_MASK	REG_GENMASK(31, 24)
 #define  PIPE_LINK_N1_EXTENDED(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
+#define  PIPE_LINK_N1_EXT_CEIL_MASK	REG_GENMASK(7, 4)
+#define  PIPE_LINK_N1_EXT_CEIL(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_CEIL_MASK, (val))
+#define  PIPE_LINK_N1_EXT_INT_MASK	REG_GENMASK(3, 0)
+#define  PIPE_LINK_N1_EXT_INT(val)	REG_FIELD_PREP(PIPE_LINK_N1_EXT_INT_MASK, (val))
 #define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
 
 #define _PIPEA_LINK_M2		0x60048
@@ -1710,6 +1719,7 @@
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_ENHANCED_TGDDA_ENABLE	REG_BIT(11)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 #define   HDCP_LINE_REKEY_DISABLE	REG_BIT(0)
 
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 8f9fb2603638..d0748837ce97 100644
@@ -985,6 +985,8 @@ struct intel_link_m_n {
 	u32 data_n;
 	u32 link_m;
 	u32 link_n;
+	/* Wa_14021768792 for linkm/n ratio > 10 */
+	bool bypass_m_n_ratio_limit;
 };
 
 struct intel_csc_matrix {
Signature · 1 line
2.34.1
#71 lore raw

PATCH v6 9/11 drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

Handle the bypass logic for the M/N ratio limit for DP. Calculate the M/N ratio, check if it can bypass the limit, and set the appropriate flags for the workaround.

v2:
-Restrict the workaround to 128b/132b links.
-Clear bypass_m_n_ratio_limit on entry, so a rejected link rate cannot leave it set for the rate that gets used. (Sashiko)
v3:
-Rebase on the reworked M/N ratio check, which no longer checks m_n and link_n. m_n is no longer const, as the flag is set through it. (Mitul) -Pass the cpu transcoder to intel_display_can_bypass_m_n_limit() instead of the pipe. (Mitul)

Bspec: 49266

---
 drivers/gpu/drm/i915/display/intel_dp.c | 28 ++++++++++++++++++++-----
 drivers/gpu/drm/i915/display/intel_dp.h |  2 +-
 2 files changed, 24 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +23 -5
index 8ef6b4c4fc8e..8e6ba5b9fde6 100644
@@ -1300,18 +1300,32 @@ intel_dp_can_support_m_n(struct intel_display *display,
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n)
+			      struct intel_link_m_n *m_n)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
 	int m_n_ratio;
 
+	m_n->bypass_m_n_ratio_limit = false;
+
 	m_n_ratio = intel_dp_link_m_n_ratio(m_n->link_m, m_n->link_n);
 
-	if (m_n_ratio > max_m_n_ratio)
+	if (m_n_ratio <= max_m_n_ratio)
+		return;
+
+	if (intel_dp_is_uhbr(crtc_state) &&
+	    intel_display_can_bypass_m_n_limit(display, m_n_ratio,
+					       crtc_state->cpu_transcoder)) {
+		m_n->bypass_m_n_ratio_limit = true;
 		drm_dbg_kms(display->drm,
-			    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
-			    m_n_ratio, max_m_n_ratio);
+			    "Bypassing Link_m/Link_n ratio limit (ratio %d)\n",
+			    m_n_ratio);
+		return;
+	}
+
+	drm_dbg_kms(display->drm,
+		    "Link M/N ratio (%d) exceeds max allowed (%d)\n",
+		    m_n_ratio, max_m_n_ratio);
 }
 
 static int intel_dp_mso_pixel_clock(struct intel_dp *intel_dp, int pixel_clock)
@@ -3393,6 +3407,9 @@ static bool can_enable_drrs(struct intel_connector *connector,
 	if (pipe_config->vrr.enable)
 		return false;
 
+	if (pipe_config->dp_m_n.bypass_m_n_ratio_limit)
+		return false;
+
 	/*
 	 * DRRS and PSR can't be enable together, so giving preference to PSR
 	 * as it allows more power-savings by complete shutting down display,
@@ -3427,7 +3444,8 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
 	 * FIXME all joined pipes share the same transcoder.
 	 * Need to account for that when updating M/N live.
 	 */
-	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes)
+	if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes &&
+	    !pipe_config->dp_m_n.bypass_m_n_ratio_limit)
 		pipe_config->update_m_n = true;
 
 	if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
drivers/gpu/drm/i915/display/intel_dp.h +1 -1
index 1e3da678c9b6..c834d90a1f81 100644
@@ -246,6 +246,6 @@ int intel_dp_link_init(struct intel_dp *intel_dp);
 void intel_dp_link_cleanup(struct intel_dp *intel_dp);
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
-			      const struct intel_link_m_n *m_n);
+			      struct intel_link_m_n *m_n);
 
 #endif /* __INTEL_DP_H__ */
Signature · 1 line
2.34.1
#72 lore raw

PATCH v6 10/11 drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass

In reply to Suraj Kandpal

From: Ankit Nautiyal <[email protected]>

On BMG platforms, the standard M/N ratio limit of 10 can be bypassed under specific conditions, as permitted by hardware capabilities.

Modify the helper intel_dp_can_support_m_n() to account for this by checking whether the platform supports bypassing the limit. The workaround is only intended for 128b/132b links, so restrict it to those.

During the mode_valid phase, the check assumes that TRANSCODER_A will be used, to allow the mode where the M/N ratio is within the limits for the workaround.

v2:
-Keep the helper static: the MST mode_valid now goes through the shared intel_dp_mode_valid_m_n() rather than calling it directly, so it no longer needs to be exported.
v3:
-Use the cpu transcoder instead of the pipe, following the change to intel_display_can_bypass_m_n_limit(). (Mitul)

---
 drivers/gpu/drm/i915/display/intel_dp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +15 -3
index 8e6ba5b9fde6..045524994d85 100644
@@ -1285,9 +1285,11 @@ static int intel_dp_link_m_n_ratio(u32 link_m, u32 link_n)
 
 static bool
 intel_dp_can_support_m_n(struct intel_display *display,
+			 const struct intel_crtc_state *crtc_state,
 			 int pixel_clock, int link_rate)
 {
 	int max_m_n_ratio = intel_dp_get_max_m_n_ratio(display);
+	enum transcoder cpu_transcoder = TRANSCODER_A;
 	u32 link_m, link_n;
 	int m_n_ratio;
 
@@ -1296,7 +1298,16 @@ intel_dp_can_support_m_n(struct intel_display *display,
 
 	m_n_ratio = intel_dp_link_m_n_ratio(link_m, link_n);
 
-	return m_n_ratio <= max_m_n_ratio;
+	if (m_n_ratio <= max_m_n_ratio)
+		return true;
+
+	if (!drm_dp_is_uhbr_rate(link_rate))
+		return false;
+
+	if (crtc_state)
+		cpu_transcoder = crtc_state->cpu_transcoder;
+
+	return intel_display_can_bypass_m_n_limit(display, m_n_ratio, cpu_transcoder);
 }
 
 void intel_dp_check_m_n_ratio(const struct intel_crtc_state *crtc_state,
@@ -1386,7 +1397,7 @@ bool intel_dp_mode_valid_m_n(struct intel_dp *intel_dp, int pixel_clock)
 	intel_dp_link_caps_iter_start(&iter, intel_dp->link.caps, order,
 				      INTEL_DP_LINK_CAPS_FILTER_ALL);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (intel_dp_can_support_m_n(display, m_n_pixel_clock,
+		if (intel_dp_can_support_m_n(display, NULL, m_n_pixel_clock,
 					     link_config.rate)) {
 			found = true;
 
@@ -2775,7 +2786,8 @@ intel_dp_compute_m_n_ratio_limits(struct intel_dp *intel_dp,
 
 	intel_dp_link_caps_iter_start(&iter, link_caps, order, limits->link_config_filter);
 	for_each_dp_link_config(&iter, &link_config) {
-		if (!intel_dp_can_support_m_n(display, pixel_clock, link_config.rate))
+		if (!intel_dp_can_support_m_n(display, crtc_state, pixel_clock,
+					      link_config.rate))
 			continue;
 
 		intel_dp_link_caps_filter_add(link_caps, &new_filter, &link_config);
Signature · 1 line
2.34.1
#73 lore raw

PATCH v6 11/11 drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35

In reply to Suraj Kandpal

Starting Xe3p max M/N ratio has been increased to 22.

Bspec: 68922

---
 drivers/gpu/drm/i915/display/intel_dp.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +3 -0
index 045524994d85..5864e33456a7 100644
@@ -1272,6 +1272,9 @@ bool intel_dp_has_dsc(const struct intel_connector *connector)
 static int
 intel_dp_get_max_m_n_ratio(struct intel_display *display)
 {
+	if (DISPLAY_VER(display) >= 35)
+		return 22;
+
 	if (intel_display_wa(display, INTEL_DISPLAY_WA_14014191401))
 		return 4;
 
Signature · 1 line
2.34.1