Skip to contentSkip to conversation

FAILED: patch "[PATCH] drm/i915/dp_mst: Fix configuring TUs for a disconnected" failed to apply to 6.12-stable tree

PATCH In review [email protected] 3 participants 3 messages Sep 29 – Sep 30

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x a443e0b8d647c1401b110d9f919d8c6cb8607260
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026092957-hardening-slingshot-e073@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a443e0b8d647c1401b110d9f919d8c6cb8607260 Mon Sep 17 00:00:00 2001
From: Imre Deak <[email protected]>
Date: Mon, 7 Sep 2026 20:44:13 +0300
Subject: [PATCH] drm/i915/dp_mst: Fix configuring TUs for a disconnected
stream

During an atomic commit after all the MST stream CRTC state is computed the driver ensures that the sum of TUs of all the streams on a given MST topology link is within limits (63 for 8b10 and 64 for 128b132b). For a disconnected stream the DRM MST core's BW verification doesn't ensure this, because the topology state it uses for this is destroyed as soon as the stream (i.e. MST connector/port) is disconnected. The driver should keep the link state valid even for such disconnected streams, as userspace may disable them one-by-one only in a deferred way. Ensure the link's sum of TUs stays within limits in this case by simply reusing the maximum link BPP limit from the stream's (i.e. CRTC's) old state.

The disconnection can happen either via the whole topology getting disconnected or via only the given stream's port getting disconnected. Check for both of these conditions separately, as a connector gets unregistered after a link disconnect event only in a deferred way.

drivers/gpu/drm/i915/display/intel_dp_mst.c +21 -0
index 9e65b4a1c71d..fb3942f56b1f 100644
@@ -2168,6 +2168,27 @@ bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 	return false;
 }
 
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc)
+{
+	struct intel_connector *connector;
+
+	connector = get_connector_in_state_for_crtc(state, crtc);
+	if (!connector)
+		return false;
+
+	if (!connector->mst.dp)
+		return false;
+
+	if (!connector->mst.dp->mst.mgr.mst_state)
+		return true;
+
+	if (drm_connector_is_unregistered(&connector->base))
+		return true;
+
+	return false;
+}
+
 /**
  * intel_dp_mst_prepare_probe - Prepare an MST link for topology probing
  * @intel_dp: DP port object
drivers/gpu/drm/i915/display/intel_dp_mst.h +2 -0
index ab09b487c6bb..8ce89242c05c 100644
@@ -28,6 +28,8 @@ int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state,
 				   struct intel_link_bw_limits *limits);
 bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 				     struct intel_crtc *crtc);
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc);
 void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp);
 bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp);
 
drivers/gpu/drm/i915/display/intel_link_bw.c +2 -1
index b47474a3e9fe..e71e76d6fd3e 100644
@@ -64,7 +64,8 @@ void intel_link_bw_init_limits(struct intel_atomic_state *state,
 			intel_atomic_get_new_crtc_state(state, crtc);
 		int forced_bpp_x16 = get_forced_link_bpp_x16(state, crtc);
 
-		if (state->base.duplicated && crtc_state) {
+		if ((state->base.duplicated && crtc_state) ||
+		    intel_dp_mst_stream_disconnected(state, crtc)) {
 			limits->max_bpp_x16[pipe] = crtc_state->max_link_bpp_x16;
 			if (intel_dsc_enabled_on_link(crtc_state))
 				limits->link_dsc_pipes |= BIT(pipe);
maintainer
#1 lore raw

PATCH 1/1 drm/i915/dp_mst: Fix configuring TUs for a disconnected stream

From: Imre Deak <[email protected]>

[ Upstream commit a443e0b8d647c1401b110d9f919d8c6cb8607260 ]

During an atomic commit after all the MST stream CRTC state is computed the driver ensures that the sum of TUs of all the streams on a given MST topology link is within limits (63 for 8b10 and 64 for 128b132b). For a disconnected stream the DRM MST core's BW verification doesn't ensure this, because the topology state it uses for this is destroyed as soon as the stream (i.e. MST connector/port) is disconnected. The driver should keep the link state valid even for such disconnected streams, as userspace may disable them one-by-one only in a deferred way. Ensure the link's sum of TUs stays within limits in this case by simply reusing the maximum link BPP limit from the stream's (i.e. CRTC's) old state.

The disconnection can happen either via the whole topology getting disconnected or via only the given stream's port getting disconnected. Check for both of these conditions separately, as a connector gets unregistered after a link disconnect event only in a deferred way.

Cc [email protected] # v6.10+
(cherry picked from commit ee00f8fbb2b202002ab90834e02e9ba372773a36)
[ adapted MST field accesses to `mst_port` and `mst_mgr`, reusing a local `crtc` lookup. ]
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c  | 21 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp_mst.h  |  2 ++
 drivers/gpu/drm/i915/display/intel_link_bw.c |  7 ++++---
 3 files changed, 27 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp_mst.c +21 -0
index eeaedd979354b..eb0ee759569c3 100644
@@ -2053,6 +2053,27 @@ bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 	return false;
 }
 
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc)
+{
+	struct intel_connector *connector;
+
+	connector = get_connector_in_state_for_crtc(state, crtc);
+	if (!connector)
+		return false;
+
+	if (!connector->mst_port)
+		return false;
+
+	if (!connector->mst_port->mst_mgr.mst_state)
+		return true;
+
+	if (drm_connector_is_unregistered(&connector->base))
+		return true;
+
+	return false;
+}
+
 /**
  * intel_dp_mst_prepare_probe - Prepare an MST link for topology probing
  * @intel_dp: DP port object
drivers/gpu/drm/i915/display/intel_dp_mst.h +2 -0
index 8343804ce3f8d..261a97e24d91e 100644
@@ -27,6 +27,8 @@ int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state,
 				   struct intel_link_bw_limits *limits);
 bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 				     struct intel_crtc *crtc);
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc);
 void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp);
 bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp);
 
drivers/gpu/drm/i915/display/intel_link_bw.c +4 -3
index e7a9b860fac6e..da4f0186311ba 100644
@@ -32,11 +32,12 @@ void intel_link_bw_init_limits(struct intel_atomic_state *state,
 	limits->force_fec_pipes = 0;
 	limits->bpp_limit_reached_pipes = 0;
 	for_each_pipe(display, pipe) {
+		struct intel_crtc *crtc = intel_crtc_for_pipe(i915, pipe);
 		const struct intel_crtc_state *crtc_state =
-			intel_atomic_get_new_crtc_state(state,
-							intel_crtc_for_pipe(i915, pipe));
+			intel_atomic_get_new_crtc_state(state, crtc);
 
-		if (state->base.duplicated && crtc_state) {
+		if ((state->base.duplicated && crtc_state) ||
+		    intel_dp_mst_stream_disconnected(state, crtc)) {
 			limits->max_bpp_x16[pipe] = crtc_state->max_link_bpp_x16;
 			if (crtc_state->fec_enable)
 				limits->force_fec_pipes |= BIT(pipe);
Signature · 1 line
2.53.0
#2 lore raw

Re: [PATCH 6.12.y] drm/i915/dp_mst: Fix configuring TUs for a disconnected stream

Quoted 105 lines · Sasha Levin

From: Imre Deak <[email protected]>

[ Upstream commit a443e0b8d647c1401b110d9f919d8c6cb8607260 ]

During an atomic commit after all the MST stream CRTC state is computed the driver ensures that the sum of TUs of all the streams on a given MST topology link is within limits (63 for 8b10 and 64 for 128b132b). For a disconnected stream the DRM MST core's BW verification doesn't ensure this, because the topology state it uses for this is destroyed as soon as the stream (i.e. MST connector/port) is disconnected. The driver should keep the link state valid even for such disconnected streams, as userspace may disable them one-by-one only in a deferred way. Ensure the link's sum of TUs stays within limits in this case by simply reusing the maximum link BPP limit from the stream's (i.e. CRTC's) old state.

The disconnection can happen either via the whole topology getting disconnected or via only the given stream's port getting disconnected. Check for both of these conditions separately, as a connector gets unregistered after a link disconnect event only in a deferred way.

Cc [email protected] # v6.10+
(cherry picked from commit ee00f8fbb2b202002ab90834e02e9ba372773a36)
[ adapted MST field accesses to `mst_port` and `mst_mgr`, reusing a local `crtc` lookup. ]
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c  | 21 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp_mst.h  |  2 ++
 drivers/gpu/drm/i915/display/intel_link_bw.c |  7 ++++---
 3 files changed, 27 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_dp_mst.c +21 -0
index eeaedd979354b..eb0ee759569c3 100644
@@ -2053,6 +2053,27 @@ bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 	return false;
 }
 
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc)
+{
+	struct intel_connector *connector;
+
+	connector = get_connector_in_state_for_crtc(state, crtc);
+	if (!connector)
+		return false;
+
+	if (!connector->mst_port)
+		return false;
+
+	if (!connector->mst_port->mst_mgr.mst_state)
+		return true;
+
+	if (drm_connector_is_unregistered(&connector->base))
+		return true;
+
+	return false;
+}
+
 /**
  * intel_dp_mst_prepare_probe - Prepare an MST link for topology probing
  * @intel_dp: DP port object
drivers/gpu/drm/i915/display/intel_dp_mst.h +2 -0
index 8343804ce3f8d..261a97e24d91e 100644
@@ -27,6 +27,8 @@ int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state,
 				   struct intel_link_bw_limits *limits);
 bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
 				     struct intel_crtc *crtc);
+bool intel_dp_mst_stream_disconnected(struct intel_atomic_state *state,
+				      const struct intel_crtc *crtc);
 void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp);
 bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp);
 
drivers/gpu/drm/i915/display/intel_link_bw.c +4 -3
index e7a9b860fac6e..da4f0186311ba 100644
@@ -32,11 +32,12 @@ void intel_link_bw_init_limits(struct intel_atomic_state *state,
 	limits->force_fec_pipes = 0;
 	limits->bpp_limit_reached_pipes = 0;
 	for_each_pipe(display, pipe) {
+		struct intel_crtc *crtc = intel_crtc_for_pipe(i915, pipe);
 		const struct intel_crtc_state *crtc_state =
-			intel_atomic_get_new_crtc_state(state,
-							intel_crtc_for_pipe(i915, pipe));
+			intel_atomic_get_new_crtc_state(state, crtc);
 
-		if (state->base.duplicated && crtc_state) {
+		if ((state->base.duplicated && crtc_state) ||
+		    intel_dp_mst_stream_disconnected(state, crtc)) {
 			limits->max_bpp_x16[pipe] = crtc_state->max_link_bpp_x16;
 			if (crtc_state->fec_enable)
 				limits->force_fec_pipes |= BIT(pipe);
Signature · 1 line
2.53.0

Breaks the build :(