FAILED: patch "[PATCH] usb: typec: ucsi: acpi: Assume UCSI 1.2 on Acer Nitro" failed to apply to 5.10-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 8c51ea651d043c786c37668c51624bd6b338a0ef
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026100554-catcall-scoreless-e7d8@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8c51ea651d043c786c37668c51624bd6b338a0ef Mon Sep 17 00:00:00 2001
From: Pannarat Wiriyaarritham <[email protected]>
Date: Thu, 10 Sep 2026 09:33:37 +0700
Subject: [PATCH] usb: typec: ucsi: acpi: Assume UCSI 1.2 on Acer Nitro
ANV15-41
The Acer Nitro ANV15-41 exposes a functional UCSI ACPI PPM but reports a UCSI VERSION value of zero.
ucsi_register() rejects a zero version with -ENODEV, leaving the system without registered USB Type-C connectors.
The PPM works correctly when using the UCSI 1.2 layout. With UCSI 1.2 assumed, both Type-C connectors register correctly and USB Power Delivery negotiation works.
Add a DMI-specific UCSI operation for the Acer Nitro ANV15-41 that substitutes UCSI 1.2 only when firmware reports a zero version. Preserve any valid non-zero firmware version.
Tested on an Acer Nitro ANV15-41 with BIOS V1.51.
drivers/usb/typec/ucsi/ucsi_acpi.c +34 -0
@@ -121,6 +121,33 @@ static const struct ucsi_operations ucsi_acpi_ops = { .async_control = ucsi_acpi_async_control }; +static int ucsi_acer_read_version (struct ucsi *ucsi,u16 *version) +{ +struct ucsi_acpi *ua =ucsi_get_drvdata (ucsi); +int ret; + + ret =ucsi_acpi_read_version (ucsi, version); +if (ret) +return ret; + +if (!*version) { +dev_warn (ua->dev,"UCSI version is zero, assuming 1.2\n" ); + *version =UCSI_VERSION_1_2 ; + } + +return 0 ; +} + +static const struct ucsi_operations ucsi_acer_ops = { + .read_version = ucsi_acer_read_version, + .read_cci = ucsi_acpi_read_cci, + .poll_cci = ucsi_acpi_poll_cci, + .read_message_in = ucsi_acpi_read_message_in, + .write_message_out = ucsi_acpi_write_message_out, + .sync_control = ucsi_sync_control_common, + .async_control = ucsi_acpi_async_control +}; +static int ucsi_gram_sync_control (struct ucsi *ucsi,u64 command,u32 *cci,void *val,size_t len,void *msg_out,size_t msg_out_size)
@@ -162,6 +189,13 @@ static const struct ucsi_operations ucsi_gram_ops = { };static const struct dmi_system_id ucsi_acpi_quirks[] = { + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Acer" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"Nitro ANV15-41" ), + }, + .driver_data = (void *)&ucsi_acer_ops, + }, { .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"LG Electronics" ),
Sasha Levin
maintainerPATCH 1/1 usb: typec: ucsi: acpi: Assume UCSI 1.2 on Acer Nitro ANV15-41
From: Pannarat Wiriyaarritham <[email protected]>
[ Upstream commit 8c51ea651d043c786c37668c51624bd6b338a0ef ]
The Acer Nitro ANV15-41 exposes a functional UCSI ACPI PPM but reports a UCSI VERSION value of zero.
ucsi_register() rejects a zero version with -ENODEV, leaving the system without registered USB Type-C connectors.
The PPM works correctly when using the UCSI 1.2 layout. With UCSI 1.2 assumed, both Type-C connectors register correctly and USB Power Delivery negotiation works.
Add a DMI-specific UCSI operation for the Acer Nitro ANV15-41 that substitutes UCSI 1.2 only when firmware reports a zero version. Preserve any valid non-zero firmware version.
Tested on an Acer Nitro ANV15-41 with BIOS V1.51.
--- drivers/usb/typec/ucsi/ucsi_acpi.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
drivers/usb/typec/ucsi/ucsi_acpi.c +18 -0
@@ -9,6 +9,7 @@#include <linux/platform_device.h> #include <linux/module.h> #include <linux/acpi.h> +#include <linux/dmi.h> #include "ucsi.h"
@@ -25,6 +26,16 @@ struct ucsi_acpi {guid_t guid; }; +static const struct dmi_system_id ucsi_acpi_quirks[] = { + { + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Acer" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"Nitro ANV15-41" ), + }, + }, + { } +}; +static int ucsi_acpi_dsm (struct ucsi_acpi *ua,int func) {union acpi_object *obj;
@@ -45,6 +56,7 @@ static int ucsi_acpi_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t val_len) {struct ucsi_acpi *ua =ucsi_get_drvdata (ucsi); +u16 *version = val;int ret; ret =ucsi_acpi_dsm (ua,UCSI_DSM_FUNC_READ );
@@ -53,6 +65,12 @@ static int ucsi_acpi_read(struct ucsi *ucsi, unsigned int offset,memcpy (val, (const void __force *)(ua->base + offset), val_len); +if (offset ==UCSI_VERSION && val_len ==sizeof (*version) && !*version && +dmi_check_system (ucsi_acpi_quirks)) { +dev_warn (ua->dev,"UCSI version is zero, assuming 1.2\n" ); + *version =0x0120 ; + } +return 0 ; }
Signature · 1 line
2.53.0