Skip to contentSkip to conversation

media: i2c: ov13858: add regulator, clock and reset GPIO handling

PATCH Simon Kruse 1 participant 1 message Oct 10 Media (V4L/DVB)

lore
Share & tools
lore

Simon Kruse

author Tested-by
#0 lore raw

Hi Sergey,

Tested on a Microsoft Surface Pro 9 (Intel Alder Lake, IPU6, rear sensor OVTID858) on top of media-committers next at d7e7bca71, where the int3472 POWER1 support and the ipu-bridge OVTID858 entry are already present.

On this machine the INT3472 drives avdd (type 0x0b) and dvdd (type 0x08, POWER1) plus the reset line; dovdd falls back to a dummy regulator. With the patch:

- the sensor probes, v4l2-compliance on the subdev: 46/46
- libcamera captures at 30 fps with no CSI-2 errors
- runtime PM: suspended when idle, active while streaming, suspended again after the stream stops

Thanks,
Simon