mgmt-tester: Add host-resolved RPA scan checks
RFC PATCH 1/1 mgmt-tester: Add host-resolved RPA scan checks
Check unfiltered passive scanning for IRK peers on controllers without LL Privacy, with auto-connect and background-report controls.
---
Companion to the kernel v2 "Bluetooth: hci_sync: scan unfiltered for host-resolved RPAs", responding to Luiz's mgmt-tester request in:
https://lore.kernel.org/linux-bluetooth/[email protected]/
This is the first submission of these BlueZ tests, not a v2 and not a cross-project apply-order series. It applies independently on BlueZ 9dc7e40962f1. The IRK cases intentionally fail on an unfixed kernel.
Native results on bluetooth-next 609a23989d63, KASAN/lockdep enabled:
upstream revised kernel
Auto-connect with IRK FAIL PASS Background report with IRK FAIL PASS Auto-connect without IRK PASS PASS Background report without IRK PASS PASS
These assert passive-scan programming, not physical address rotation or successful radio reconnect. On the complete 512-case mgmt run, upstream has 503 pass/four fail/five not run; revision has 506 pass/one fail/five not run. Both have the "Set Static Address - Success 2" timeout. The upstream run also fails the two new IRK tests and the already-listed flaky "LL Privacy - Set Flags 3 (2 Devices to RL)" test. The latter's pass is not attributed to the RPA fix. No captured KASAN/lockdep alerts.
Maintainer-mode sanitizer build and 35/35 unit binaries pass. The complete mgmt suite is not clean; no physical hardware test is claimed.
tools/mgmt-tester.c | 119 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)
tools/mgmt-tester.c +119 -0
@@ -10667,6 +10667,114 @@ static const char load_irks_le_public_param_1[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, }; +static const uint8_t host_rpa_report_param[] = { +0x12 ,0x34 ,0x56 ,0x78 ,0x9a ,0xbc , +0x01 , +0x00 , +}; + +static const struct bt_hci_cmd_le_set_scan_parameters host_rpa_unfiltered = { + .filter_policy =0x00 , +}; + +static const struct bt_hci_cmd_le_set_scan_parameters host_rpa_filtered = { + .filter_policy =0x01 , +}; + +static int host_rpa_unfiltered_check (const void *param,uint16_t length) +{ +const struct bt_hci_cmd_le_set_scan_parameters *cp = param; + +if (length !=sizeof (*cp)) +return -EINVAL ; + +return cp->type !=0x00 || cp->filter_policy !=0x00 ; +} + +static int host_rpa_filtered_check (const void *param,uint16_t length) +{ +const struct bt_hci_cmd_le_set_scan_parameters *cp = param; + +if (length !=sizeof (*cp)) +return -EINVAL ; + +return cp->type !=0x00 || cp->filter_policy !=0x01 ; +} + +static const struct generic_data host_rpa_autoconnect = { + .setup_settings = settings_powered_le, + .setup_send_opcode =MGMT_OP_LOAD_IRKS , + .setup_send_param = load_irks_le_public_param_1, + .setup_send_len =sizeof (load_irks_le_public_param_1), + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = add_device_le_public_param_1, + .send_len =sizeof (add_device_le_public_param_1), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = add_device_le_public_param_1, + .expect_alt_ev_len =sizeof (add_device_le_public_param_1), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_unfiltered, + .expect_hci_len =sizeof (host_rpa_unfiltered), + .expect_hci_param_check_func = host_rpa_unfiltered_check, +}; + +static const struct generic_data host_rpa_report = { + .setup_settings = settings_powered_le, + .setup_send_opcode =MGMT_OP_LOAD_IRKS , + .setup_send_param = load_irks_le_public_param_1, + .setup_send_len =sizeof (load_irks_le_public_param_1), + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = host_rpa_report_param, + .send_len =sizeof (host_rpa_report_param), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = host_rpa_report_param, + .expect_alt_ev_len =sizeof (host_rpa_report_param), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_unfiltered, + .expect_hci_len =sizeof (host_rpa_unfiltered), + .expect_hci_param_check_func = host_rpa_unfiltered_check, +}; + +static const struct generic_data host_rpa_no_irk_autoconnect = { + .setup_settings = settings_powered_le, + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = add_device_le_public_param_1, + .send_len =sizeof (add_device_le_public_param_1), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = add_device_le_public_param_1, + .expect_alt_ev_len =sizeof (add_device_le_public_param_1), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_filtered, + .expect_hci_len =sizeof (host_rpa_filtered), + .expect_hci_param_check_func = host_rpa_filtered_check, +}; + +static const struct generic_data host_rpa_no_irk_report = { + .setup_settings = settings_powered_le, + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = host_rpa_report_param, + .send_len =sizeof (host_rpa_report_param), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = host_rpa_report_param, + .expect_alt_ev_len =sizeof (host_rpa_report_param), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_filtered, + .expect_hci_len =sizeof (host_rpa_filtered), + .expect_hci_param_check_func = host_rpa_filtered_check, +}; +static const uint8_t add_device_le_public_param_2[] = {0x11 ,0x22 ,0x33 ,0x44 ,0x55 ,0x66 ,/* BDADDR */ 0x01 ,/* Type - LE Public */
@@ -15737,6 +15845,17 @@ int main(int argc, char *argv[]) &set_exp_feat_unknown, NULL, test_command_generic); +/* Bluetooth 4.0 has no controller-side address resolution. */ +test_bredrle ("Host RPA - Auto-connect with IRK" , &host_rpa_autoconnect, + setup_command_generic, test_command_generic); +test_bredrle ("Host RPA - Background report with IRK" , &host_rpa_report, + setup_command_generic, test_command_generic); +test_bredrle ("Host RPA - Auto-connect without IRK" , + &host_rpa_no_irk_autoconnect,NULL , + test_command_generic); +test_bredrle ("Host RPA - Background report without IRK" , + &host_rpa_no_irk_report,NULL , test_command_generic); +/* LL Privacy * Setup: Enable LE and Power On * Run: Add new device
base-commit: 9dc7e40962f11d1d9a5568f8a7633a695288329c
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1185254/
---Test result---
Test Summary:
CheckPatch PASS 0.40 seconds GitLint PASS 0.23 seconds BuildEll PASS 17.37 seconds BluezMake PASS 259.90 seconds CheckSmatch PASS 245.53 seconds bluezmakeextell PASS 88.14 seconds TestFunctional PASS 1025.63 seconds IncrementalBuild PASS 266.77 seconds ScanBuild PASS 992.30 seconds
https://github.com/bluez/bluez/pull/2676
---
Regards,
Linux Bluetooth
Just checking in on this patch. Is there anything else I can do to help it move forward?
Quoted 174 lines · Kyle Pepper
Check unfiltered passive scanning for IRK peers on controllers without LL Privacy, with auto-connect and background-report controls.
Assisted-by OpenCode:gpt-6.1-sol---
Companion to the kernel v2 "Bluetooth:hci_sync: scan unfiltered for host-resolved RPAs", responding to Luiz's mgmt-tester request in:
https://lore.kernel.org/linux-bluetooth/[email protected]/This is the first submission of these BlueZ tests, not a v2 and not a cross-project apply-order series. It applies independently on BlueZ
9dc7e40962f1. The IRK cases intentionally fail on an unfixed kernel.Native results on bluetooth-next
609a23989d63, KASAN/lockdep enabled:
upstream revised kernelAuto-connect with IRK FAIL PASS Background report with IRK FAIL PASS Auto-connect without IRK PASS PASS Background report without IRK PASS PASSThese assert passive-scan programming, not physical address rotation or successful radio reconnect. On the complete 512-case mgmt run, upstream has 503 pass/four fail/five not run; revision has 506 pass/one fail/five not run. Both have the "Set Static Address - Success 2" timeout. The upstream run also fails the two new IRK tests and the already-listed flaky "LL Privacy - Set Flags 3 (2 Devices to RL)" test. The latter's pass is not attributed to the RPA fix. No captured KASAN/lockdep alerts.
Maintainer-mode sanitizer build and 35/35 unit binaries pass. The complete mgmt suite is not clean; no physical hardware test is claimed.
tools/mgmt-tester.c | 119 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)tools/mgmt-tester.c +119
-0@@ -10667,6 +10667,114 @@ static const char load_irks_le_public_param_1[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, }; +static const uint8_t host_rpa_report_param[] = { +0x12 ,0x34 ,0x56 ,0x78 ,0x9a ,0xbc , +0x01 , +0x00 , +}; + +static const struct bt_hci_cmd_le_set_scan_parameters host_rpa_unfiltered = { + .filter_policy =0x00 , +}; + +static const struct bt_hci_cmd_le_set_scan_parameters host_rpa_filtered = { + .filter_policy =0x01 , +}; + +static int host_rpa_unfiltered_check (const void *param,uint16_t length) +{ +const struct bt_hci_cmd_le_set_scan_parameters *cp = param; + +if (length !=sizeof (*cp)) +return -EINVAL ; + +return cp->type !=0x00 || cp->filter_policy !=0x00 ; +} + +static int host_rpa_filtered_check (const void *param,uint16_t length) +{ +const struct bt_hci_cmd_le_set_scan_parameters *cp = param; + +if (length !=sizeof (*cp)) +return -EINVAL ; + +return cp->type !=0x00 || cp->filter_policy !=0x01 ; +} + +static const struct generic_data host_rpa_autoconnect = { + .setup_settings = settings_powered_le, + .setup_send_opcode =MGMT_OP_LOAD_IRKS , + .setup_send_param = load_irks_le_public_param_1, + .setup_send_len =sizeof (load_irks_le_public_param_1), + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = add_device_le_public_param_1, + .send_len =sizeof (add_device_le_public_param_1), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = add_device_le_public_param_1, + .expect_alt_ev_len =sizeof (add_device_le_public_param_1), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_unfiltered, + .expect_hci_len =sizeof (host_rpa_unfiltered), + .expect_hci_param_check_func = host_rpa_unfiltered_check, +}; + +static const struct generic_data host_rpa_report = { + .setup_settings = settings_powered_le, + .setup_send_opcode =MGMT_OP_LOAD_IRKS , + .setup_send_param = load_irks_le_public_param_1, + .setup_send_len =sizeof (load_irks_le_public_param_1), + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = host_rpa_report_param, + .send_len =sizeof (host_rpa_report_param), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = host_rpa_report_param, + .expect_alt_ev_len =sizeof (host_rpa_report_param), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_unfiltered, + .expect_hci_len =sizeof (host_rpa_unfiltered), + .expect_hci_param_check_func = host_rpa_unfiltered_check, +}; + +static const struct generic_data host_rpa_no_irk_autoconnect = { + .setup_settings = settings_powered_le, + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = add_device_le_public_param_1, + .send_len =sizeof (add_device_le_public_param_1), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = add_device_le_public_param_1, + .expect_alt_ev_len =sizeof (add_device_le_public_param_1), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_filtered, + .expect_hci_len =sizeof (host_rpa_filtered), + .expect_hci_param_check_func = host_rpa_filtered_check, +}; + +static const struct generic_data host_rpa_no_irk_report = { + .setup_settings = settings_powered_le, + .send_opcode =MGMT_OP_ADD_DEVICE , + .send_param = host_rpa_report_param, + .send_len =sizeof (host_rpa_report_param), + .expect_param = add_device_rsp_le_public, + .expect_len =sizeof (add_device_rsp_le_public), + .expect_status =MGMT_STATUS_SUCCESS , + .expect_alt_ev =MGMT_EV_DEVICE_ADDED , + .expect_alt_ev_param = host_rpa_report_param, + .expect_alt_ev_len =sizeof (host_rpa_report_param), + .expect_hci_command =BT_HCI_CMD_LE_SET_SCAN_PARAMETERS , + .expect_hci_param = &host_rpa_filtered, + .expect_hci_len =sizeof (host_rpa_filtered), + .expect_hci_param_check_func = host_rpa_filtered_check, +}; +static const uint8_t add_device_le_public_param_2[] = {0x11 ,0x22 ,0x33 ,0x44 ,0x55 ,0x66 ,/* BDADDR */ 0x01 ,/* Type - LE Public */ @@ -15737,6 +15845,17 @@ int main(int argc, char *argv[]) &set_exp_feat_unknown, NULL, test_command_generic); +/* Bluetooth 4.0 has no controller-side address resolution. */ +test_bredrle ("Host RPA - Auto-connect with IRK" , &host_rpa_autoconnect, + setup_command_generic, test_command_generic); +test_bredrle ("Host RPA - Background report with IRK" , &host_rpa_report, + setup_command_generic, test_command_generic); +test_bredrle ("Host RPA - Auto-connect without IRK" , + &host_rpa_no_irk_autoconnect,NULL , + test_command_generic); +test_bredrle ("Host RPA - Background report without IRK" , + &host_rpa_no_irk_report,NULL , test_command_generic); +/* LL Privacy * Setup: Enable LE and Power On * Run: Add new device base-commit:
9dc7e40962f11d1d9a5568f8a7633a695288329c
This is an automated email and please do not reply to this email.
Dear Submitter,
This series was picked up by the CI more than 2 weeks ago and the pull request created for it is still open, which means the series was never applied to the tree.
Series: [RFC] mgmt-tester: Add host-resolved RPA scan checks
Pull Request: https://github.com/bluez/bluez/pull/2676
Created: 2026-10-14 06:48:53+00:00
The pull request has been closed and no further action is taken on this series.
If the change should still be considered, it must be resent to the Linux Bluetooth mailing list ([email protected]) so that it is picked up again.
---
Regards,
Linux Bluetooth