dt-bindings: display: Convert hisilicon,hi6220-dsi to DT schema

deleted file mode 100644
index d270bfe4e4e0..000000000000
@@ -1,72 +0,0 @@
-Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
-
-A DSI Host Controller resides in the middle of display controller and external
-HDMI converter or panel.
-
-Required properties:
-- compatible: value should be "hisilicon,hi6220-dsi".
-- reg: physical base address and length of dsi controller's registers.
-- clocks: contains APB clock phandle + clock-specifier pair.
-- clock-names: should be "pclk".
-- ports: contains DSI controller input and output sub port.
-  The input port connects to ADE output port with the reg value "0".
-  The output port with the reg value "1", it could connect to panel or
-  any other bridge endpoints.
-  See Documentation/devicetree/bindings/graph.txt for more device graph info.
-
-A example of HiKey board hi6220 SoC and board specific DT entry:
-Example:
-
-SoC specific:
-	dsi: dsi@f4107800 {
-		compatible = "hisilicon,hi6220-dsi";
-		reg = <0x0 0xf4107800 0x0 0x100>;
-		clocks = <&media_ctrl  HI6220_DSI_PCLK>;
-		clock-names = "pclk";
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 0 for input port */
-			port@0 {
-				reg = <0>;
-				dsi_in: endpoint {
-					remote-endpoint = <&ade_out>;
-				};
-			};
-		};
-	};
-
-
-Board specific:
-	&dsi {
-		status = "ok";
-
-		ports {
-			/* 1 for output port */
-			port@1 {
-				reg = <1>;
-
-				dsi_out0: endpoint@0 {
-					remote-endpoint = <&adv7533_in>;
-				};
-			};
-		};
-	};
-
-	&i2c2 {
-		...
-
-		adv7533: adv7533@39 {
-			...
-
-			port {
-				adv7533_in: endpoint {
-					remote-endpoint = <&dsi_out0>;
-				};
-			};
-		};
-	};
-

68 lines not on this page · raw message