Skip to contentSkip to conversation

tas2783-sdw: firmware names and I/V-sense capture on HP 8EA1

DISCUSSION Kel Modderman 1 participant 1 message Oct 24 Sound

lore
Share & tools
lore
#0 lore raw

Hi Baojun,

Thanks for the TAS2783 firmware and the UCM profile. With kernel 7.3 the speakers on my HP OmniBook X Flip 14 (board 8EA1, two TAS2783 on link 0, uids 9 and C) now work in stereo.

Two small things:

1. linux-firmware commit 43cc9de7 ships 8EA1 (and 8EA2, 8EA4-8EA8, 9013, 9014, 9015, 9026) only with four-field names, for example ti/audio/tas2783/8EA1-0-0-0x9.bin. tas2783-sdw.c in 7.3 and master still requests "%04X-%1X-%s%1X.bin", for example 8EA1-0-0x9.bin, so the firmware is not found without local symlinks. What does the third field mean? Should the driver build it, or should linux-firmware add three-field links?

2. The I/V-sense capture SDW0-PIN4-CAPTURE-SmartAmp cannot be opened:

     slave-tas2783 sdw:0:0:0102:0000:01:c: port 2 not supported for TX

PipeWire probes every PCM at session start, so this logs about 120 errors per boot. Is this capture expected to work on this board?

I am happy to test patches.

Thanks,
Kel