Skip to contentSkip to conversation

ALSA: hda/conexant: Add mute LED quirk for HP ZBook 17 G3

PATCH Superseded ahmad baghereslami 2 participants 3 messages Oct 29 – Oct 31 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hda/conexant: Add mute LED quirk for HP ZBook 17 G3

The HP ZBook 17 G3 (PCI SSID 103c:80d6, codec CX20724 with SSID 103c:80f8) has a speaker-mute LED wired to GPIO0 of the codec, the same as HP's other Conexant laptops of that generation. HP's Windows driver for this model sets EnableGPIO0MuteSignal. The mic-mute key's LED is not connected to the codec: toggling each of GPIO0-6, the EAPD of the unused pins 0x1d and 0x22, and the VREF of pins 0x18 and 0x1d only ever lit the speaker-mute LED (GPIO0). CXT_FIXUP_MUTE_LED_GPIO would also register a mic-mute LED on GPIO1, which drives nothing here, so add a fixup that only sets up the mute LED on GPIO0.

Tested on an HP ZBook 17 G3 with Ubuntu's 7.0.0 kernel and this change applied to its conexant.c: hda::mute follows the master mute, sound and the microphone keep working, and the mic-mute key still mutes the mic.

The GPIO and pin tests, reading HP's driver and this patch were done with the help of an AI coding assistant (Claude); I verified the LED behaviour on the machine.

---
 sound/hda/codecs/conexant.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
sound/hda/codecs/conexant.c +13 -0
index a141c94ee..525a6d0d1 100644
@@ -305,6 +305,7 @@ enum {
 	CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED,
 	CXT_FIXUP_HP_ELITEONE_OUT_DIS,
 	CXT_FIXUP_HP_ZBOOK_MUTE_LED,
+	CXT_FIXUP_MUTE_LED_GPIO0,
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
 	CXT_PINCFG_SWS_JS201D,
@@ -810,6 +811,13 @@ static void cxt_fixup_hp_zbook_mute_led(struct hda_codec *codec,
 		cxt_setup_mute_led(codec, 0x10, 0x20);
 }
 
+static void cxt_fixup_mute_led_gpio0(struct hda_codec *codec,
+				     const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+		cxt_setup_mute_led(codec, 0x01, 0);
+}
+
 static void cxt_fixup_acer_aspire_go_mute_led(struct hda_codec *codec,
 					      const struct hda_fixup *fix, int action)
 {
@@ -1089,6 +1097,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_hp_zbook_mute_led,
 	},
+	[CXT_FIXUP_MUTE_LED_GPIO0] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = cxt_fixup_mute_led_gpio0,
+	},
 	[CXT_FIXUP_HEADSET_MIC] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_headset_mic,
@@ -1193,6 +1205,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x1025, 0x1937, "Acer Aspire Go 16", CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x807C, "HP EliteBook 820 G3", CXT_FIXUP_HP_DOCK),
+	SND_PCI_QUIRK(0x103c, 0x80d6, "HP ZBook 17 G3", CXT_FIXUP_MUTE_LED_GPIO0),
 	SND_PCI_QUIRK(0x103c, 0x80FD, "HP ProBook 640 G2", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
 	SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO),
Signature · 1 line
2.53.0
#1 lore raw

PATCH v2 1/1 ALSA: hda/conexant: Add mute LED quirk for HP ZBook 17 G3

The HP ZBook 17 G3 (PCI SSID 103c:80d6, codec CX20724 with SSID 103c:80f8) has its speaker-mute LED on codec GPIO0 and its mic-mute LED on GPIO1, both active high, like the HP ZBook 15u G3 that already uses CXT_FIXUP_MUTE_LED_GPIO. HP's Windows driver agrees: chdrt.inf sets EnableGPIO0MuteSignal for this model, and MicTray's MasterMute section for SUBSYS_103C80D6/103C80F8 sets PlaybackGPIO = 0 and CaptureGPIO = 1.

Use CXT_FIXUP_MUTE_LED_GPIO for it.

Tested on an HP ZBook 17 G3 with Ubuntu's 7.0.0 kernel: with each GPIO held high and low, GPIO0 switches only the speaker-mute LED and GPIO1 only the mic-mute LED; GPIO2-6 switch neither. With this quirk applied, hda::mute and hda::micmute follow the speaker and mic mute, and sound and the microphone keep working.

Finding the LEDs (the GPIO tests and reading HP's driver) and writing this patch were done with the help of an AI coding assistant (Claude); I checked the LEDs on the machine.

---

Notes:
v2: v1 said the mic-mute LED is not on the codec and added a mute-only fixup. That was wrong: my v1 test blinked each GPIO too fast to see. Holding each GPIO high and low shows GPIO1 is the mic-mute LED, as HP's MicTray configuration for this model says, so v2 just uses the existing CXT_FIXUP_MUTE_LED_GPIO. v1:
https://lore.kernel.org/all/[email protected]/

 sound/hda/codecs/conexant.c | 1 +
 1 file changed, 1 insertion(+)
sound/hda/codecs/conexant.c +1 -0
index a141c94ee..88651a36d 100644
@@ -1193,6 +1193,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x1025, 0x1937, "Acer Aspire Go 16", CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x807C, "HP EliteBook 820 G3", CXT_FIXUP_HP_DOCK),
+	SND_PCI_QUIRK(0x103c, 0x80d6, "HP ZBook 17 G3", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x80FD, "HP ProBook 640 G2", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
 	SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO),
Signature · 1 line
2.53.0
#2 lore raw
Quoted 16 lines · ahmad baghereslami

The HP ZBook 17 G3 (PCI SSID 103c:80d6, codec CX20724 with SSID 103c:80f8) has its speaker-mute LED on codec GPIO0 and its mic-mute LED on GPIO1, both active high, like the HP ZBook 15u G3 that already uses CXT_FIXUP_MUTE_LED_GPIO. HP's Windows driver agrees: chdrt.inf sets EnableGPIO0MuteSignal for this model, and MicTray's MasterMute section for SUBSYS_103C80D6/103C80F8 sets PlaybackGPIO = 0 and CaptureGPIO = 1.

Use CXT_FIXUP_MUTE_LED_GPIO for it.

Tested on an HP ZBook 17 G3 with Ubuntu's 7.0.0 kernel: with each GPIO held high and low, GPIO0 switches only the speaker-mute LED and GPIO1 only the mic-mute LED; GPIO2-6 switch neither. With this quirk applied, hda::mute and hda::micmute follow the speaker and mic mute, and sound and the microphone keep working.

Quoted 5 lines

Finding the LEDs (the GPIO tests and reading HP's driver) and writing this patch were done with the help of an AI coding assistant (Claude); I checked the LEDs on the machine.

Applied now. Thanks.

Takashi