clk: hisilicon: Remove hi3516cv300 driver
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 clk: hisilicon: Remove hi3516cv300 driver
Remove the hi3516cv300 clock driver as there is no such platform upstream and only drivers for clocks, pwm and ethernet. There's also been no changes other than common cleanups in 10 years since the driver was added.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- drivers/clk/hisilicon/Kconfig | 9 - drivers/clk/hisilicon/Makefile | 1 - drivers/clk/hisilicon/crg-hi3516cv300.c | 317 ------------------ include/dt-bindings/clock/hi3516cv300-clock.h | 36 -- 4 files changed, 363 deletions(-) delete mode 100644 drivers/clk/hisilicon/crg-hi3516cv300.c delete mode 100644 include/dt-bindings/clock/hi3516cv300-clock.h
drivers/clk/hisilicon/Kconfig +0 -9
@@ -3,15 +3,6 @@ config COMMON_CLK_HISI bool default ARCH_HISI -config COMMON_CLK_HI3516CV300 - tristate "HI3516CV300 Clock Driver" - depends on ARCH_HISI || COMPILE_TEST - select RESET_HISI - select COMMON_CLK_HISI - default ARCH_HISI - help - Build the clock driver for hi3516cv300. - config COMMON_CLK_HI3519 tristate "Hi3519 Clock Driver" depends on ARCH_HISI || COMPILE_TEST
drivers/clk/hisilicon/Makefile +0 -1
@@ -8,7 +8,6 @@ obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o clk-hisi-phase.o obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o -obj-$(CONFIG_COMMON_CLK_HI3516CV300) += crg-hi3516cv300.o obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o obj-$(CONFIG_COMMON_CLK_HI3559A) += clk-hi3559a.o obj-$(CONFIG_COMMON_CLK_HI3660) += clk-hi3660.o
drivers/clk/hisilicon/crg-hi3516cv300.c deleted +0 -317
317 lines not on this page · raw message
include/dt-bindings/clock/hi3516cv300-clock.h deleted +0 -36
@@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* -* Copyright (c) 2016 HiSilicon Technologies Co., Ltd. -*/ - -#ifndef __DTS_HI3516CV300_CLOCK_H -#define __DTS_HI3516CV300_CLOCK_H - -/* hi3516CV300 core CRG */ -#define HI3516CV300_APB_CLK 0 -#define HI3516CV300_UART0_CLK 1 -#define HI3516CV300_UART1_CLK 2 -#define HI3516CV300_UART2_CLK 3 -#define HI3516CV300_SPI0_CLK 4 -#define HI3516CV300_SPI1_CLK 5 -#define HI3516CV300_FMC_CLK 6 -#define HI3516CV300_MMC0_CLK 7 -#define HI3516CV300_MMC1_CLK 8 -#define HI3516CV300_MMC2_CLK 9 -#define HI3516CV300_MMC3_CLK 10 -#define HI3516CV300_ETH_CLK 11 -#define HI3516CV300_ETH_MACIF_CLK 12 -#define HI3516CV300_DMAC_CLK 13 -#define HI3516CV300_PWM_CLK 14 -#define HI3516CV300_USB2_BUS_CLK 15 -#define HI3516CV300_USB2_OHCI48M_CLK 16 -#define HI3516CV300_USB2_OHCI12M_CLK 17 -#define HI3516CV300_USB2_OTG_UTMI_CLK 18 -#define HI3516CV300_USB2_HST_PHY_CLK 19 -#define HI3516CV300_USB2_UTMI0_CLK 20 -#define HI3516CV300_USB2_PHY_CLK 21 - -/* hi3516CV300 sysctrl CRG */ -#define HI3516CV300_WDT_CLK 1 - -#endif /* __DTS_HI3516CV300_CLOCK_H */
Signature · 1 line
2.53.0
Quoted 6 lines · Rob Herring (Arm)
Remove the hi3516cv300 clock driver as there is no such platform upstream and only drivers for clocks, pwm and ethernet. There's also been no changes other than common cleanups in 10 years since the driver was added.
Signed-off-by Rob Herring (Arm) <[email protected]>
Quoted 8 lines
--- drivers/clk/hisilicon/Kconfig | 9 - drivers/clk/hisilicon/Makefile | 1 - drivers/clk/hisilicon/crg-hi3516cv300.c | 317 ------------------ include/dt-bindings/clock/hi3516cv300-clock.h | 36 -- 4 files changed, 363 deletions(-) delete mode 100644 drivers/clk/hisilicon/crg-hi3516cv300.c delete mode 100644 include/dt-bindings/clock/hi3516cv300-clock.h
Reviewed-by Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Brian Masney
AppliedQuoted 1 line · Rob Herring (Arm)
clk: hisilicon: Remove hi3516cv300 driver
Applied, thanks!
[1/1] clk: hisilicon: Remove hi3516cv300 driver
https://git.kernel.org/clk/linux/c/3865d0d4439f
Best regards,
Signature · 1 line
Brian Masney <[email protected]>